aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/raid
Commit message (Collapse)AuthorAge
* md: fix some comments.Andre Noll2009-06-17
| | | | | | | 1/ Raid5 has learned to take over also raid4 and raid6 arrays. 2/ new_chunk in mdp_superblock_1 is in sectors, not bytes. Signed-off-by: NeilBrown <neilb@suse.de>
* md/raid6: move raid6 data processing to raid6_pq.koDan Williams2009-03-31
| | | | | | | | | | | | | | | | | Move the raid6 data processing routines into a standalone module (raid6_pq) to prepare them to be called from async_tx wrappers and other non-md drivers/modules. This precludes a circular dependency of raid456 needing the async modules for data processing while those modules in turn depend on raid456 for the base level synchronous raid6 routines. To support this move: 1/ The exportable definitions in raid6.h move to include/linux/raid/pq.h 2/ The raid6_call, recovery calls, and table symbols are exported 3/ Extra #ifdef __KERNEL__ statements to enable the userspace raid6test to compile Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: move md_k.h from include/linux/raid/ to drivers/md/NeilBrown2009-03-30
| | | | | | It really is nicer to keep related code together.. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move lots of #include lines out of .h files and into .cNeilBrown2009-03-30
| | | | | | | | | | This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move most content from md.h to md_k.hNeilBrown2009-03-30
| | | | | | | | | | | | The extern function definitions are kernel-internal definitions, so they belong in md_k.h The MD_*_VERSION values could reasonably go in a number of places, but md_u.h seems most reasonable. This leaves almost nothing in md.h. It will go soon. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move LEVEL_* definition from md_k.h to md_u.hNeilBrown2009-03-30
| | | | | | | | | | | .. as they are part of the user-space interface. Also move MdpMinorShift into there so we can remove duplication. Lastly move mdp_major in. It is less obviously part of the user-space interface, but do_mounts_md.c uses it, and it is acting a bit like user-space. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move headers out of include/linux/raid/Christoph Hellwig2009-03-30
| | | | | | | | | | Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Fix is_mddev_idle test (again).NeilBrown2009-03-30
| | | | | | | | | | | | | | | | | | | | There are two problems with is_mddev_idle. 1/ sync_io is 'atomic_t' and hence 'int'. curr_events and all the rest are 'long'. So if sync_io were to wrap on a 64bit host, the value of curr_events would go very negative suddenly, and take a very long time to return to positive. So do all calculations as 'int'. That gives us plenty of precision for what we need. 2/ To initialise rdev->last_events we simply call is_mddev_idle, on the assumption that it will make sure that last_events is in a suitable range. It used to do this, but now it does not. So now we need to be more explicit about initialisation. Signed-off-by: NeilBrown <neilb@suse.de>
* headers_check fix: raid/md_p.hJaswinder Singh Rajput2009-01-30
| | | | | | | | fix the following 'make headers_check' warning: usr/include/linux/raid/md_p.h:85: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
* md: don't retry recovery of raid1 that fails due to error on source drive.NeilBrown2009-01-08
| | | | | | | | | | | | | | | | If a raid1 has only one working drive and it has a sector which gives an error on read, then an attempt to recover onto a spare will fail, but as the single remaining drive is not removed from the array, the recovery will be immediately re-attempted, resulting in an infinite recovery loop. So detect this situation and don't retry recovery once an error on the lone remaining drive is detected. Allow recovery to be retried once every time a spare is added in case the problem wasn't actually a media error. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Allow md devices to be created by name.NeilBrown2009-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | Using sequential numbers to identify md devices is somewhat artificial. Using names can be a lot more user-friendly. Also, creating md devices by opening the device special file is a bit awkward. So this patch provides a new option for creating and naming devices. Writing a name such as "md_home" to /sys/modules/md_mod/parameters/new_array will cause an array with that name to be created. It will appear in /sys/block/ /proc/partitions and /proc/mdstat as 'md_home'. It will have an arbitrary minor number allocated. md devices that a created by an open are destroyed on the last close when the device is inactive. For named md devices, they will not be destroyed until the array is explicitly stopped, either with the STOP_ARRAY ioctl or by writing 'clear' to /sys/block/md_XXXX/md/array_state. The name of the array must start 'md_' to avoid conflict with other devices. Signed-off-by: NeilBrown <neilb@suse.de>
* md: make devices disappear when they are no longer needed.NeilBrown2009-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently md devices, once created, never disappear until the module is unloaded. This is essentially because the gendisk holds a reference to the mddev, and the mddev holds a reference to the gendisk, this a circular reference. If we drop the reference from mddev to gendisk, then we need to ensure that the mddev is destroyed when the gendisk is destroyed. However it is not possible to hook into the gendisk destruction process to enable this. So we drop the reference from the gendisk to the mddev and destroy the gendisk when the mddev gets destroyed. However this has a complication. Between the call __blkdev_get->get_gendisk->kobj_lookup->md_probe and the call __blkdev_get->md_open there is no obvious way to hold a reference on the mddev any more, so unless something is done, it will disappear and gendisk will be destroyed prematurely. Also, once we decide to destroy the mddev, there will be an unlockable moment before the gendisk is unlinked (blk_unregister_region) during which a new reference to the gendisk can be created. We need to ensure that this reference can not be used. i.e. the ->open must fail. So: 1/ in md_probe we set a flag in the mddev (hold_active) which indicates that the array should be treated as active, even though there are no references, and no appearance of activity. This is cleared by md_release when the device is closed if it is no longer needed. This ensures that the gendisk will survive between md_probe and md_open. 2/ In md_open we check if the mddev we expect to open matches the gendisk that we did open. If there is a mismatch we return -ERESTARTSYS and modify __blkdev_get to retry from the top in that case. In the -ERESTARTSYS sys case we make sure to wait until the old gendisk (that we succeeded in opening) is really gone so we loop at most once. Some udev configurations will always open an md device when it first appears. If we allow an md device that was just created by an open to disappear on an immediate close, then this can race with such udev configurations and result in an infinite loop the device being opened and closed, then re-open due to the 'ADD' even from the first open, and then close and so on. So we make sure an md device, once created by an open, remains active at least until some md 'ioctl' has been made on it. This means that all normal usage of md devices will allow them to disappear promptly when not needed, but the worst that an incorrect usage will do it cause an inactive md device to be left in existence (it can easily be removed). As an array can be stopped by writing to a sysfs attribute echo clear > /sys/block/mdXXX/md/array_state we need to use scheduled work for deleting the gendisk and other kobjects. This allows us to wait for any pending gendisk deletion to complete by simply calling flush_scheduled_work(). Signed-off-by: NeilBrown <neilb@suse.de>
* md: need another print_sb for mdp_superblock_1Cheng Renquan2009-01-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | md_print_devices is called in two code path: MD_BUG(...), and md_ioctl with PRINT_RAID_DEBUG. it will dump out all in use md devices information; However, it wrongly processed two types of superblock in one: The header file <linux/raid/md_p.h> has defined two types of superblock, struct mdp_superblock_s (typedefed with mdp_super_t) according to md with metadata 0.90, and struct mdp_superblock_1 according to md with metadata 1.0 and later, These two types of superblock are very different, The md_print_devices code processed them both in mdp_super_t, that would lead to wrong informaton dump like: [ 6742.345877] [ 6742.345887] md: ********************************** [ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> * [ 6742.345892] md: ********************************** [ 6742.345896] md1: <ram7><ram6><ram5><ram4> [ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 6742.345909] md: rdev superblock: [ 6742.345914] md: SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d [ 6742.345918] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 6742.345922] md: UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001 [ 6742.345924] D 0: DISK<N:0,(1,8),R:0,S:6> [ 6742.345930] D 1: DISK<N:1,(1,10),R:1,S:6> [ 6742.345933] D 2: DISK<N:2,(1,12),R:2,S:6> [ 6742.345937] D 3: DISK<N:3,(1,14),R:3,S:6> [ 6742.345942] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 6742.346058] md0: <ram3><ram2><ram1><ram0> [ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 6742.346070] md: rdev superblock: [ 6742.346073] md: SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c [ 6742.346077] md: L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610 [ 6742.346081] md: UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000 [ 6742.346084] D 0: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346089] D 1: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346092] D 2: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346096] D 3: DISK<N:-1,(-1,-1),R:-1,S:-1> [ 6742.346102] md: THIS: DISK<N:0,(0,0),R:0,S:0> ... [ 6742.346219] md: ********************************** [ 6742.346221] Here md1 is metadata 0.90.0, and md0 is metadata 1.2 After some more code to distinguish these two types of superblock, in this patch, it will generate dump information like: [ 7906.755790] [ 7906.755799] md: ********************************** [ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> * [ 7906.755804] md: ********************************** [ 7906.755808] md1: <ram7><ram6><ram5><ram4> [ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3 [ 7906.755821] md: rdev superblock (MJ:0): [ 7906.755826] md: SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3 [ 7906.755830] md: L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536 [ 7906.755834] md: UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001 [ 7906.755836] D 0: DISK<N:0,(1,8),R:0,S:6> [ 7906.755842] D 1: DISK<N:1,(1,10),R:1,S:6> [ 7906.755845] D 2: DISK<N:2,(1,12),R:2,S:6> [ 7906.755849] D 3: DISK<N:3,(1,14),R:3,S:6> [ 7906.755855] md: THIS: DISK<N:3,(1,14),R:3,S:6> ... [ 7906.755972] md0: <ram3><ram2><ram1><ram0> [ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3 [ 7906.755984] md: rdev superblock (MJ:1): [ 7906.755989] md: SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd> [ 7906.755990] md: Name: "DG5:0" CT:1226410480 [ 7906.755998] md: L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0 [ 7906.755999] md: Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a [ 7906.756001] md: (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829 [ 7906.756003] md: (MaxDev:384) ... [ 7906.756113] md: ********************************** [ 7906.756116] this md0 (metadata 1.2) information dumping is exactly according to struct mdp_superblock_1. Signed-off-by: Cheng Renquan <crquan@gmail.com> Cc: Neil Brown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: use list_for_each_entry macro directlyCheng Renquan2009-01-08
| | | | | | | | | | | | | | | | | The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to list_for_each_entry_safe, from <linux/list.h>, it should be defined to use list_for_each_entry_safe, instead of reinventing the wheel. But some calls to each_entry_safe don't really need a safe version, just a direct list_for_each_entry is enough, this could save a temp variable (tmp) in every function that used rdev_for_each. In this patch, most rdev_for_each loops are replaced by list_for_each_entry, totally save many tmp vars; and only in the other situations that will call list_del to delete an entry, the safe version is used. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: raid0: make hash_spacing and preshift sector-based.Andre Noll2009-01-08
| | | | | | | | | | | | | | | | | This patch renames the hash_spacing and preshift members of struct raid0_private_data to spacing and sector_shift respectively and changes the semantics as follows: We always have spacing = 2 * hash_spacing. In case sizeof(sector_t) > sizeof(u32) we also have sector_shift = preshift + 1 while sector_shift = preshift = 0 otherwise. Note that the values of nb_zone and zone are unaffected by these changes because in the sector_div() preceeding the assignement of these two variables both arguments double. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: raid0: Represent the size of strip zones in sectors.Andre Noll2009-01-08
| | | | | | | This completes the block -> sector conversion of struct strip_zone. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: raid0: Represent zone->zone_offset in sectors.Andre Noll2009-01-08
| | | | | | | | For the same reason as in the previous patch, rename it from zone_offset to zone_start. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: raid0: Represent device offset in sectors.Andre Noll2009-01-08
| | | | | | | | Rename zone->dev_offset to zone->dev_start to make sure all users have been converted. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: use sysfs_notify_dirent to notify changes to md/sync_action.NeilBrown2009-01-08
| | | | | | | There is no compelling need for this, but sysfs_notify_dirent is a nicer interface and the change is good for consistency. Signed-off-by: NeilBrown <neilb@suse.de>
* md: use sysfs_notify_dirent to notify changes to md/dev-xxx/stateNeilBrown2008-10-20
| | | | | | | | | | The 'state' file for a device reports, for example, when the device has failed. Changes should be reported to userspace ASAP without the possibility of blocking on low-memory. sysfs_notify does have that possibility (as it takes a mutex which can be held across a kmalloc) so use sysfs_notify_dirent instead. Signed-off-by: NeilBrown <neilb@suse.de>
* md: use sysfs_notify_dirent to notify changes to md/array_stateNeilBrown2008-10-20
| | | | | | | | | Now that we have sysfs_notify_dirent, use it to notify changes to md/array_state. As sysfs_notify_dirent can be called in atomic context, we can remove the delayed notify and the MD_NOTIFY_ARRAY_STATE flag. Signed-off-by: NeilBrown <neilb@suse.de>
* md: remove space after function name in declaration and call.NeilBrown2008-10-12
| | | | | | | | | | | | Having function (args) instead of function(args) make is harder to search for calls of particular functions. So remove all those spaces. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Remove unnecessary #includes, #defines, and function declarations.NeilBrown2008-10-12
| | | | | | A lot of cruft has gathered over the years. Time to remove it. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Convert remaining 1k representations in linear.c to sectors.Andre Noll2008-10-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames hash_spacing and preshift to spacing and sector_shift respectively with the following change of semantics: Case 1: (sizeof(sector_t) <= sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In this case, we have sector_shift = preshift = 0 and spacing = 2 * hash_spacing. Hence, the index for the hash table which is computed by the new code in which_dev() as sector / spacing equals the old value which was (sector/2) / hash_spacing. Note also that the value of nb_zone stays the same because both sz and base double. Case 2: (sizeof(sector_t) > sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (aka the shifting dance case). Here we have sector_shift = preshift + 1 and spacing = 2 * hash_spacing during the computation of nb_zone and curr_sector, but spacing = hash_spacing in which_dev() because in the last hunk of the patch for linear.c we shift down conf->spacing (= 2 * hash_spacing) by one more bit than in the old code. Hence in the computation of nb_zone, sz and base have the same value as before, so nb_zone is not affected. Also curr_sector in the next hunk stays the same. In which_dev() the hash table index is computed as (sector >> sector_shift) / spacing In view of sector_shift = preshift + 1 and spacing = hash_spacing, this equals ((sector/2) >> preshift) / hash_spacing which is the value computed by the old code. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear: Represent dev_info->size and dev_info->offset in sectors.Andre Noll2008-10-12
| | | | | | | Rename them to num_sectors and start_sector which is more descriptive. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: delay notification of 'active_idle' to the recovery threadDan Williams2008-07-23
| | | | | | sysfs_notify might sleep, so do not call it from md_safemode_timeout. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* md: Protect access to mddev->disks list using RCUNeilBrown2008-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All modifications and most access to the mddev->disks list are made under the reconfig_mutex lock. However there are three places where the list is walked without any locking. If a reconfig happens at this time, havoc (and oops) can ensue. So use RCU to protect these accesses: - wrap them in rcu_read_{,un}lock() - use list_for_each_entry_rcu - add to the list with list_add_rcu - delete from the list with list_del_rcu - delay the 'free' with call_rcu rather than schedule_work Note that export_rdev did a list_del_init on this list. In almost all cases the entry was not in the list anymore so it was a no-op and so safe. It is no longer safe as after list_del_rcu we may not touch the list_head. An audit shows that export_rdev is called: - after unbind_rdev_from_array, in which case the delete has already been done, - after bind_rdev_to_array fails, in which case the delete isn't needed. - before the device has been put on a list at all (e.g. in add_new_disk where reading the superblock fails). - and in autorun devices after a failure when the device is on a different list. So remove the list_del_init call from export_rdev, and add it back immediately before the called to export_rdev for that last case. Note also that ->same_set is sometimes used for lists other than mddev->list (e.g. candidates). In these cases rcu is not needed. Signed-off-by: NeilBrown <neilb@suse.de>
* md: only count actual openers as access which prevent a 'stop'NeilBrown2008-07-21
| | | | | | | | | Open isn't the only thing that increments ->active. e.g. reading /proc/mdstat will increment it briefly. So to avoid false positives in testing for concurrent access, introduce a new counter that counts just the number of times the md device it open. Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear: Make array_size sector-based and rename it to array_sectors.Andre Noll2008-07-21
| | | | | Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Make mddev->array_size sector-based.Andre Noll2008-07-21
| | | | | | | | | This patch renames the array_size field of struct mddev_s to array_sectors and converts all instances to use units of 512 byte sectors instead of 1k blocks. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Remove some unused macros.Andre Noll2008-07-11
| | | | | Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Neil Brown <neilb@suse.de>
* md: Turn rdev->sb_offset into a sector-based quantity.Andre Noll2008-07-11
| | | | | | | Rename it to sb_start to make sure all users have been converted. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Neil Brown <neilb@suse.de>
* md: resolve external metadata handling deadlock in md_allow_writeDan Williams2008-06-30
| | | | | | | | | | | | | | | | | | | | | | md_allow_write() marks the metadata dirty while holding mddev->lock and then waits for the write to complete. For externally managed metadata this causes a deadlock as userspace needs to take the lock to communicate that the metadata update has completed. Change md_allow_write() in the 'external' case to start the 'mark active' operation and then return -EAGAIN. The expected side effects while waiting for userspace to write 'active' to 'array_state' are holding off reshape (code currently handles -ENOMEM), cause some 'stripe_cache_size' change requests to fail, cause some GET_BITMAP_FILE ioctl requests to fall back to GFP_NOIO, and cause updates to 'raid_disks' to fail. Except for 'stripe_cache_size' changes these failures can be mitigated by coordinating with mdmon. md_write_start() still prevents writes from occurring until the metadata handler has had a chance to take action as it unconditionally waits for MD_CHANGE_CLEAN to be cleared. [neilb@suse.de: return -EAGAIN, try GFP_NOIO] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* md: replace R5_WantPrexor with R5_WantDrain, add 'prexor' reconstruct_statesDan Williams2008-06-27
| | | | | | | | | | | | | From: Dan Williams <dan.j.williams@intel.com> Currently ops_run_biodrain and other locations have extra logic to determine which blocks are processed in the prexor and non-prexor cases. This can be eliminated if handle_write_operations5 flags the blocks to be processed in all cases via R5_Wantdrain. The presence of the prexor operation is tracked in sh->reconstruct_state. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
* md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states'Dan Williams2008-06-27
| | | | | | | | | | | | | | | | | From: Dan Williams <dan.j.williams@intel.com> Track the state of reconstruct operations (recalculating the parity block usually due to incoming writes, or as part of array expansion) Reduces the scope of the STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} flags to only tracking whether a reconstruct operation has been requested via the ops_request field of struct stripe_head_state. This is the final step in the removal of ops.{pending,ack,complete,count}, i.e. the STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} flags only request an operation and do not track the state of the operation. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
* md: replace STRIPE_OP_CHECK with 'check_states'Dan Williams2008-06-27
| | | | | | | | | | | | | | | | | | | | | | | | From: Dan Williams <dan.j.williams@intel.com> The STRIPE_OP_* flags record the state of stripe operations which are performed outside the stripe lock. Their use in indicating which operations need to be run is straightforward; however, interpolating what the next state of the stripe should be based on a given combination of these flags is not straightforward, and has led to bugs. An easier to read implementation with minimal degrees of freedom is needed. Towards this goal, this patch introduces explicit states to replace what was previously interpolated from the STRIPE_OP_* flags. For now this only converts the handle_parity_checks5 path, removing a user of the ops.{pending,ack,complete,count} fields of struct stripe_operations. This conversion also found a remaining issue with the current code. There is a small window for a drive to fail between when we schedule a repair and when the parity calculation for that repair completes. When this happens we will writeback to 'failed_num' when we really want to write back to 'pd_idx'. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
* md: kill STRIPE_OP_IO flagDan Williams2008-06-27
| | | | | | | | | | From: Dan Williams <dan.j.williams@intel.com> The R5_Want{Read,Write} flags already gate i/o. So, this flag is superfluous and we can unconditionally call ops_run_io(). Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
* md: kill STRIPE_OP_MOD_DMA in raid5 offloadDan Williams2008-06-27
| | | | | | | | | | | | | | | | | | From: Dan Williams <dan.j.williams@intel.com> This micro-optimization allowed the raid code to skip a re-read of the parity block after checking parity. It took advantage of the fact that xor-offload-engines have their own internal result buffer and can check parity without writing to memory. Remove it for the following reasons: 1/ It is a layering violation for MD to need to manage the DMA and non-DMA paths within async_xor_zero_sum 2/ Bad precedent to toggle the 'ops' flags outside the lock 3/ Hard to realize a performance gain as reads will not need an updated parity block and writes will dirty it anyways. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de>
* Make sure all changes to md/dev-XX/state are notifiedNeil Brown2008-06-27
| | | | | | | | The important state change happens during an interrupt in md_error. So just set a flag there and call sysfs_notify later in process context. Signed-off-by: Neil Brown <neilb@suse.de>
* Make sure all changes to md/sync_action are notified.Neil Brown2008-06-27
| | | | | | | | | | | | | When the 'resync' thread starts or stops, when we explicitly set sync_action, or when we determine that there is definitely nothing to do, we notify sync_action. To stop "sync_action" from occasionally showing the wrong value, we introduce a new flags - MD_RECOVERY_RECOVER - to say that a recovery is probably needed or happening, and we make sure that we set MD_RECOVERY_RUNNING before clearing MD_RECOVERY_NEEDED. Signed-off-by: Neil Brown <neilb@suse.de>
* Allow setting start point for requested check/repairNeil Brown2008-06-27
| | | | | | | | | | This makes it possible to just resync a small part of an array. e.g. if a drive reports that it has questionable sectors, a 'repair' of just the region covering those sectors will cause them to be read and, if there is an error, re-written with correct data. Signed-off-by: Neil Brown <neilb@suse.de>
* Improve setting of "events_cleared" for write-intent bitmaps.Neil Brown2008-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an array is degraded, bits in the write-intent bitmap are not cleared, so that if the missing device is re-added, it can be synced by only updated those parts of the device that have changed since it was removed. The enable this a 'events_cleared' value is stored. It is the event counter for the array the last time that any bits were cleared. Sometimes - if a device disappears from an array while it is 'clean' - the events_cleared value gets updated incorrectly (there are subtle ordering issues between updateing events in the main metadata and the bitmap metadata) resulting in the missing device appearing to require a full resync when it is re-added. With this patch, we update events_cleared precisely when we are about to clear a bit in the bitmap. We record events_cleared when we clear the bit internally, and copy that to the superblock which is written out before the bit on storage. This makes it more "obviously correct". We also need to update events_cleared when the event_count is going backwards (as happens on a dirty->clean transition of a non-degraded array). Thanks to Mike Snitzer for identifying this problem and testing early "fixes". Cc: "Mike Snitzer" <snitzer@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de>
* md: restart recovery cleanly after device failure.NeilBrown2008-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: allow parallel resync of md-devices.Bernd Schubert2008-05-24
| | | | | | | | | | | | | | In some configurations, a raid6 resync can be limited by CPU speed (Calculating P and Q and moving data) rather than by device speed. In these cases there is nothing to be gained byt serialising resync of arrays that share a device, and doing the resync in parallel can provide benefit. So add a sysfs tunable to flag an array as being allowed to resync in parallel with other arrays that use (a different part of) the same device. Signed-off-by: Bernd Schubert <bs@q-leap.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: kill file_path wrapperChristoph Hellwig2008-05-24
| | | | | | | | | Kill the trivial and rather pointless file_path wrapper around d_path. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: proper extern for mdp_majorAdrian Bunk2008-05-24
| | | | | | | | | This patch adds a proper extern for mdp_major in include/linux/raid/md.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: support blocking writes to an array on device failureDan Williams2008-04-30
| | | | | | | | | | | | | | | | | | | | Allows a userspace metadata handler to take action upon detecting a device failure. Based on an original patch by Neil Brown. Changes: -added blocked_wait waitqueue to rdev -don't qualify Blocked with Faulty always let userspace block writes -added md_wait_for_blocked_rdev to wait for the block device to be clear, if userspace misses the notification another one is sent every 5 seconds -set MD_RECOVERY_NEEDED after clearing "blocked" -kill DoBlock flag, just test mddev->external Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: introduce get_priority_stripe() to improve raid456 write performanceDan Williams2008-04-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve write performance by preventing the delayed_list from dumping all its stripes onto the handle_list in one shot. Delayed stripes are now further delayed by being held on the 'hold_list'. The 'hold_list' is bypassed when: * a STRIPE_IO_STARTED stripe is found at the head of 'handle_list' * 'handle_list' is empty and i/o is being done to satisfy full stripe-width write requests * 'bypass_count' is less than 'bypass_threshold'. By default the threshold is 1, i.e. every other stripe handled is a preread stripe provided the top two conditions are false. Benchmark data: System: 2x Xeon 5150, 4x SATA, mem=1GB Baseline: 2.6.24-rc7 Configuration: mdadm --create /dev/md0 /dev/sd[b-e] -n 4 -l 5 --assume-clean Test1: dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 * patched: +33% (stripe_cache_size = 256), +25% (stripe_cache_size = 512) Test2: tiobench --size 2048 --numruns 5 --block 4096 --block 131072 (XFS) * patched: +13% * patched + preread_bypass_threshold = 0: +37% Changes since v1: * reduce bypass_threshold from (chunk_size / sectors_per_chunk) to (1) and make it configurable. This defaults to fairness and modest performance gains out of the box. Changes since v2: * [neilb@suse.de]: kill STRIPE_PRIO_HI and preread_needed as they are not necessary, the important change was clearing STRIPE_DELAYED in add_stripe_bio and this has been moved out to make_request for the hang fix. * [neilb@suse.de]: simplify get_priority_stripe * [dan.j.williams@intel.com]: reset the bypass_count when ->hold_list is sampled empty (+11%) * [dan.j.williams@intel.com]: decrement the bypass_count at the detection of stripes being naturally promoted off of hold_list +2%. Note, resetting bypass_count instead of decrementing on these events yields +4% but that is probably too aggressive. Changes since v3: * cosmetic fixups Tested-by: James W. Laferriere <babydr@baby-dragons.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* include: Remove unnecessary inclusions of asm/semaphore.hMatthew Wilcox2008-04-18
| | | | | | | | | None of these files use any of the functionality promised by asm/semaphore.h. It's possible that they (or some user of them) rely on it dragging in some unrelated header file, but I can't build all these files, so we'll have to fix any build failures as they come up. Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* md: clean up irregularity with raid autodetectNeilBrown2008-03-04
| | | | | | | | | | | When a raid1 array is stopped, all components currently get added to the list for auto-detection. However we should really only add components that were found by autodetection in the first place. So add a flag to record that information, and use it. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-04 22:48:43 -0500