aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/pci.h
Commit message (Collapse)AuthorAge
* PCI PM: Introduce device flag wakeup_preparedRafael J. Wysocki2009-09-09
| | | | | | | | | | Introduce a new PCI device flag, wakeup_prepared, to prevent PCI wake-up preparation code from being executed twice in a row for the same device and for the same purpose. Reviewed-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pcie: Ensure hotplug ports have a minimum number of resourcesEric W. Biederman2009-09-09
| | | | | | | | | | | | | | | | | | | In general a BIOS may goof or we may hotplug in a hotplug controller. In either case the kernel needs to reserve resources for plugging in more devices in the future instead of creating a minimal resource assignment. We already do this for cardbus bridges I am just adding a variant for pcie bridges. v2: Make testing for pcie hotplug bridges based on a flag. So far we only set the flag for pcie but a header_quirk could easily be added for the non-standard pci hotplug bridges. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: separate out pci_add_dynid()Tejun Heo2009-09-09
| | | | | | | | | | | | | | | | | Separate out pci_add_dynid() from store_new_id() and export it so that in-kernel code can add PCI IDs dynamically. As the function will be available regardless of HOTPLUG, put it and pull pci_free_dynids() outside of CONFIG_HOTPLUG. This will be used by pci-stub to initialize initial IDs via module param. While at it, remove bogus get_driver() failure check. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: support for PCI Express fundamental resetMike Mason2009-09-09
| | | | | | | | | | | | | | | | | | | | | | | This is the first of three patches that implement a bit field that PCI Express device drivers can use to indicate they need a fundamental reset during error recovery. By default, the EEH framework on powerpc does what's known as a "hot reset" during recovery of a PCI Express device. We've found a case where the device needs a "fundamental reset" to recover properly. The current PCI error recovery and EEH frameworks do not support this distinction. The attached patch (courtesy of Richard Lary) adds a bit field to pci_dev that indicates whether the device requires a fundamental reset during recovery. These patches supersede the previously submitted patch that implemented a fundamental reset bit field. Signed-off-by: Mike Mason <mmlnx@us.ibm.com> Signed-off-by: Richard Lary <rlary@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI/GPU: implement VGA arbitration on LinuxBenjamin Herrenschmidt2009-09-09
| | | | | | | | | | | | | | | | | | | | | | | Background: Graphic devices are accessed through ranges in I/O or memory space. While most modern devices allow relocation of such ranges, some "Legacy" VGA devices implemented on PCI will typically have the same "hard-decoded" addresses as they did on ISA. For more details see "PCI Bus Binding to IEEE Std 1275-1994 Standard for Boot (Initialization Configuration) Firmware Revision 2.1" Section 7, Legacy Devices. The Resource Access Control (RAC) module inside the X server currently does the task of arbitration when more than one legacy device co-exists on the same machine. But the problem happens when these devices are trying to be accessed by different userspace clients (e.g. two server in parallel). Their address assignments conflict. Therefore an arbitration scheme _outside_ of the X server is needed to control the sharing of these resources. This document introduces the operation of the VGA arbiter implemented for Linux kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Tiago Vignatti <tiago.vignatti@nokia.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: expose function reset capability in sysfsMichael S. Tsirkin2009-09-09
| | | | | | | | | | | | | | Some devices allow an individual function to be reset without affecting other functions in the same device: that's what pci_reset_function does. For devices that have this support, expose reset attribite in sysfs. This is useful e.g. for virtualization, where a qemu userspace process wants to reset the device when the guest is reset, to emulate machine reboot as closely as possible. Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make pci_name() take const argumentAlexey Zaytsev2009-06-29
| | | | | | | | Since this function should never modify it (saves warnings when called with const args too). Signed-off-by: Alexey Zaytsev <zaytsev@altell.ru> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge git://git.infradead.org/~dwmw2/iommu-2.6.31Linus Torvalds2009-06-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/~dwmw2/iommu-2.6.31: intel-iommu: Fix one last ia64 build problem in Pass Through Support VT-d: support the device IOTLB VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps VT-d: add device IOTLB invalidation support VT-d: parse ATSR in DMA Remapping Reporting Structure PCI: handle Virtual Function ATS enabling PCI: support the ATS capability intel-iommu: dmar_set_interrupt return error value intel-iommu: Tidy up iommu->gcmd handling intel-iommu: Fix tiny theoretical race in write-buffer flush. intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing. intel-iommu: Clean up handling of "caching mode" vs. context flushing. VT-d: fix invalid domain id for KVM context flush Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support Intel IOMMU Pass Through Support Fix up trivial conflicts in drivers/pci/{intel-iommu.c,intr_remapping.c}
| * PCI: support the ATS capabilityYu Zhao2009-05-18
| | | | | | | | | | | | | | | | | | | | | | The PCIe ATS capability makes the Endpoint be able to request the DMA address translation from the IOMMU and cache the translation in the device side, thus alleviate IOMMU pressure and improve the hardware performance in the I/O virtualization environment. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | Merge branch 'linux-next' of ↵Linus Torvalds2009-06-22
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
| * | PCI PM: consistently use type bool for wake enable variableFrans Pop2009-06-16
| | | | | | | | | | | | | | | | | | | | | Other functions use type bool, so use that for pci_enable_wake as well. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: cleanup Function Level ResetYu Zhao2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enhances the FLR functions: 1) remove disable_irq() so the shared IRQ won't be disabled. 2) replace the 1s wait with 100, 200 and 400ms wait intervals for the Pending Transaction. 3) replace mdelay() with msleep(). 4) add might_sleep(). 5) lock the device to prevent PM suspend from accessing the CSRs during the reset. 6) coding style fixes. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI AER: support Multiple Error Received and no error source idZhang, Yanmin2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on PCI Express AER specs, a root port might receive multiple TLP errors while it could only save a correctable error source id and an uncorrectable error source id at the same time. In addition, some root port hardware might be unable to provide a correct source id, i.e., the source id, or the bus id part of the source id provided by root port might be equal to 0. The patchset implements the support in kernel by searching the device tree under the root port. Patch 1 changes parameter cb of function pci_walk_bus to return a value. When cb return non-zero, pci_walk_bus stops more searching on the device tree. Reviewed-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI hotplug: create symlink to hotplug driver moduleKenji Kaneshige2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create symbolic link to hotplug driver module in the PCI slot directory (/sys/bus/pci/slots/<SLOT#>). In the past, we need to load hotplug drivers one by one to identify the hotplug driver that handles the slot, and it was very inconvenient especially for trouble shooting. With this change, we can easily identify the hotplug driver. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Add pci_bus_set_opsHuang Ying2009-06-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_bus_set_ops changes pci_ops associated with a pci_bus. This can be used by debug tools such as PCIE AER error injection to fake some PCI configuration registers. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: Add support for turning PCIe ECRC on or offAndrew Patterson2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for PCI Express transaction layer end-to-end CRC checking (ECRC). This patch will enable/disable ECRC checking by setting/clearing the ECRC Check Enable and/or ECRC Generation Enable bits for devices that support ECRC. The ECRC setting is controlled by the "pci=ecrc=<policy>" command-line option. If this option is not set or is set to 'bios", the enable and generation bits are left in whatever state that firmware/BIOS set them to. The "off" setting turns them off, and the "on" option turns them on (if the device supports it). Turning ECRC on or off can be a data integrity versus performance tradeoff. In theory, turning it on will catch more data errors, turning it off means possibly better performance since CRC does not need to be calculated by the PCIe hardware and packet sizes are reduced. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI: remove deprecated pci_find_slot() interfaceAlex Chiang2009-06-11
| | | | | | | | | | | | | | | | | | | | | | | | The last in-tree caller of pci_find_slot has been converted, so let's get rid of this deprecated interface. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | PCI/x86: don't assume prefetchable ranges are 64bitYinghai Lu2009-06-11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | We should not assign 64bit ranges to PCI devices that only take 32bit prefetchable addresses. Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge and make the bus resource only have that bit set when all devices under it support 64bit prefetchable memory. Use that flag to allocate resources from that range. Reported-by: Yannick <yannick.roehlly@free.fr> Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* / PCI: add power-state name stringsAlan Stern2009-06-16
|/ | | | | | | | | | | This patch (as1235) adds an array of PCI power-state names, together with a simple inline accessor routine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* PCI: Setup disabled bridges even if buses are addedYuji Shimada2009-04-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'linux-next' of ↵Linus Torvalds2009-04-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
| * PCI: Introduce pci_rescan_bus()Alex Chiang2009-03-20
| | | | | | | | | | | | | | | | | | | | | | | | This API is used by the PCI core to rescan a bus and rediscover newly added devices. Over time, it is expected that the various PCI hotplug drivers will migrate to this interface and away from the old pci_do_scan_bus() interface. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: pci_is_root_bus helperKenji Kaneshige2009-03-20
| | | | | | | | | | | | | | | | | | | | Introduce pci_is_root_bus helper function. This will help make code more consistent, as well as prevent incorrect assumptions (such as pci_bus->self == NULL on a root bus, which is not always true). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: handle SR-IOV Virtual Function MigrationYu Zhao2009-03-20
| | | | | | | | | | | | | | | | | | Add or remove a Virtual Function after receiving a Migrate In or Out Request. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: add SR-IOV API for Physical Function driverYu Zhao2009-03-20
| | | | | | | | | | | | | | | | | | | | Add or remove the Virtual Function when the SR-IOV is enabled or disabled by the device driver. This can happen anytime rather than only at the device probe stage. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: initialize and release SR-IOV capabilityYu Zhao2009-03-20
| | | | | | | | | | | | | | | | | | | | | | | | If a device has the SR-IOV capability, initialize it (set the ARI Capable Hierarchy in the lowest numbered PF if necessary; calculate the System Page Size for the VF MMIO, probe the VF Offset, Stride and BARs). A lock for the VF bus allocation is also initialized if a PF is the lowest numbered PF. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI MSI: Add support for multiple MSIMatthew Wilcox2009-03-20
| | | | | | | | | | | | | | | | | | | | Add the new API pci_enable_msi_block() to allow drivers to request multiple MSI and reimplement pci_enable_msi in terms of pci_enable_msi_block. Ensure that the architecture back ends don't have to know about multiple MSI. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: constify pci_bus_assign_resources()Andrew Morton2009-03-19
| | | | | | | | | | | | | | | | drivers/pci/hotplug/fakephp.c: In function 'pci_rescan_bus': drivers/pci/hotplug/fakephp.c:271: warning: passing argument 1 of 'pci_bus_assign_resources' discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI: constify pci_bus_add_devices()akpm@linux-foundation.org2009-03-19
| | | | | | | | | | | | | | drivers/pci/hotplug/fakephp.c:283: warning: passing argument 1 of 'pci_bus_add_devices' discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * PCI/MSI: Introduce pci_msix_table_size()Rafael J. Wysocki2009-03-19
| | | | | | | | | | | | | | | | | | | | Introduce new function pci_msix_table_size() returning the size of the MSI-X table of given PCI device or 0 if the device doesn't support MSI-X. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI PM: Introduce __pci_[start|complete]_power_transition() (rev. 2)Rafael J. Wysocki2009-03-30
|/ | | | | | | | | | | | | | | | | The radeonfb driver needs to program the device's PMCSR directly due to some quirky hardware it has to handle (see http://bugzilla.kernel.org/show_bug.cgi?id=12846 for details) and after doing that it needs to call the platform (usually ACPI) to finish the power transition of the device. Currently it uses pci_set_power_state() for this purpose, however making a specific assumption about the internal behavior of this function, which has changed recently so that this assumption is no longer satisfied. For this reason, introduce __pci_complete_power_transition() that may be called by the radeonfb driver to complete the power transition of the device. For symmetry, introduce __pci_start_power_transition(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: return error on failure to read PCI ROMsTimothy S. Nelson2009-02-04
| | | | | | | | | | | | This patch makes the ROM reading code return an error to user space if the size of the ROM read is equal to 0. The patch also emits a warnings if the contents of the ROM are invalid, and documents the effects of the "enable" file on ROM reading. Signed-off-by: Timothy S. Nelson <wayland@wayland.id.au> Acked-by: Alex Villacis-Lasso <a_villacis@palosanto.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI PM: Restore standard config registers of all devices earlyRafael J. Wysocki2009-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | There is a problem in our handling of suspend-resume of PCI devices that many of them have their standard config registers restored with interrupts enabled and they are put into the full power state with interrupts enabled as well. This may lead to the following scenario: * an interrupt vector is shared between two or more devices * one device is resumed earlier and generates an interrupt * the interrupt handler of another device tries to handle it and attempts to access the device the config space of which hasn't been restored yet and/or which still is in a low power state * the system crashes as a result To prevent this from happening we should restore the standard configuration registers of all devices with interrupts disabled and we should put them into the D0 power state right after that. Unfortunately, this cannot be done using the existing pci_set_power_state(), because it can sleep. Also, to do it we have to make sure that the config spaces of all devices were actually saved during suspend. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: Do not use interrupt links for devices using MSI-XRafael J. Wysocki2009-01-07
| | | | | | | | | | pcibios_enable_device() and pcibios_disable_device() don't handle IRQs for devices that have MSI enabled and it should treat the devices with MSI-X enabled in the same way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add pci_clear_master() as opposite of pci_set_master()Ben Hutchings2009-01-07
| | | | | | | | | | | | During an online device reset it may be useful to disable bus-mastering. pci_disable_device() does that, and far more besides, so is not suitable for an online reset. Add pci_clear_master() which does just this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add interface to set visible size of VPDStephen Hemminger2009-01-07
| | | | | | | | | The VPD on all devices may not be 32K. Unfortunately, there is no generic way to find the size, so this adds a simple API hook to reset it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: revise VPD access interfaceStephen Hemminger2009-01-07
| | | | | | | | | | | Change PCI VPD API which was only used by sysfs to something usable in drivers. * move iteration over multiple words to the low level * use conventional types for arguments * add exportable wrapper Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add pci_common_swizzle() for INTx swizzlingBjorn Helgaas2009-01-07
| | | | | | | | | | | | This patch adds pci_common_swizzle(), which swizzles INTx values all the way up to a root bridge. This common implementation can replace several architecture-specific ones. This should someday be combined with pci_get_interrupt_pin(), but I left it separate for now to make reviewing easier. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: define PCI resource names in an 'enum'Yu Zhao2009-01-07
| | | | | | | | | | This patch moves all definitions of the PCI resource names to an 'enum', and also replaces some hard-coded resource variables with symbol names. This change eases introduction of device specific resources. Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove unnecessary arg of pci_update_resource()Yu Zhao2009-01-07
| | | | | | | | | This cleanup removes unnecessary argument 'struct resource *res' in pci_update_resource(), so it takes same arguments as other companion functions (pci_assign_resource(), etc.). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: uninline pci_ioremap_bar()Andrew Morton2009-01-07
| | | | | | | | It's too large to be inlined. Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add pci_swizzle_interrupt_pin()Bjorn Helgaas2009-01-07
| | | | | | | | | | | | | This patch adds pci_swizzle_interrupt_pin(), which implements the INTx swizzling algorithm specified in Table 9-1 of the "PCI-to-PCI Bridge Architecture Specification," revision 1.2. There are many architecture-specific implementations of this swizzle that can be replaced by this common one. Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* resource: allow MMIO exclusivity for device driversArjan van de Ven2009-01-07
| | | | | | | | | | | | | | | | | | | | | Device drivers that use pci_request_regions() (and similar APIs) have a reasonable expectation that they are the only ones accessing their device. As part of the e1000e hunt, we were afraid that some userland (X or some bootsplash stuff) was mapping the MMIO region that the driver thought it had exclusively via /dev/mem or via various sysfs resource mappings. This patch adds the option for device drivers to cause their reserved regions to the "banned from /dev/mem use" list, so now both kernel memory and device-exclusive MMIO regions are banned. NOTE: This is only active when CONFIG_STRICT_DEVMEM is set. In addition to the config option, a kernel parameter iomem=relaxed is provided for the cases where developers want to diagnose, in the field, drivers issues from userspace. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: PCI MSI _OSC support capabilities called when root bridge addedAndrew Patterson2009-01-07
| | | | | | | | | | The _OSC capability OSC_MSI_SUPPORT is set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the PCI MSI driver. Also adds the function pci_msi_enabled, which returns true if pci=nomsi is not on the kernel command-line. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: PCIe ASPM _OSC support capabilities called when root bridge addedAndrew Patterson2009-01-07
| | | | | | | | | | | The _OSC capabilities OSC_ACTIVE_STATE_PWR_SUPPORT and OSC_CLOCK_PWR_CAPABILITY_SUPPORT are set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the ASPM driver. Also add the function pcie_aspm_enabled, which returns true if pcie_aspm=off is not on the kernel command-line. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* ACPI/PCI: PCI extended config _OSC support called when root bridge addedAndrew Patterson2009-01-07
| | | | | | | | | | | | | | The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root bridge is added with pci_acpi_osc_support() if we can access PCI extended config space. This adds the function pci_ext_cfg_avail which returns true if we can access PCI extended config space (offset greater than 0xff). It currently only returns false if arch=x86 and raw_pci_ext_ops is not set (which might happen if pci=nommcfg is set on the kernel command-line). Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PM: Simplify the new suspend/hibernation framework for devicesRafael J. Wysocki2009-01-06
| | | | | | | | | | | | | | | | | | | | | | PM: Simplify the new suspend/hibernation framework for devices Following the discussion at the Kernel Summit, simplify the new device PM framework by merging 'struct pm_ops' and 'struct pm_ext_ops' and removing pointers to 'struct pm_ext_ops' from 'struct platform_driver' and 'struct pci_driver'. After this change, the suspend/hibernation callbacks will only reside in 'struct device_driver' as well as at the bus type/ device class/device type level. Accordingly, PCI and platform device drivers are now expected to put their suspend/hibernation callbacks into the 'struct device_driver' embedded in 'struct pci_driver' or 'struct platform_driver', respectively. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
*---. Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', ↵Ingo Molnar2008-12-23
|\ \ \ | | | | | | | | | | | | 'x86/crashdump', 'x86/debug', 'x86/defconfig', 'x86/detect-hyper', 'x86/doc', 'x86/dumpstack', 'x86/early-printk', 'x86/fpu', 'x86/idle', 'x86/io', 'x86/memory-corruption-check', 'x86/microcode', 'x86/mm', 'x86/mtrr', 'x86/nmi-watchdog', 'x86/pat2', 'x86/pci-ioapic-boot-irq-quirks', 'x86/ptrace', 'x86/quirks', 'x86/reboot', 'x86/setup-memory', 'x86/signal', 'x86/sparse-fixes', 'x86/time', 'x86/uv' and 'x86/xen' into x86/core
| | | * Merge commit 'v2.6.28-rc2' into x86/pci-ioapic-boot-irq-quirksIngo Molnar2008-10-28
| | | |\ | | |_|/ | |/| |
| | | * Merge branch 'linus' into x86/pci-ioapic-boot-irq-quirksIngo Molnar2008-07-18
| | | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/pci/quirks.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-06 02:43:40 -0500