aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/netdevice.h
Commit message (Collapse)AuthorAge
* dev: support deferring device flag change notificationsPatrick McHardy2010-02-27
| | | | | | | | | | | | | | | | | | | | | | | Split dev_change_flags() into two functions: __dev_change_flags() to perform the actual changes and __dev_notify_flags() to invoke netdevice notifiers. This will be used by rtnl_link to defer netlink notifications until the device has been fully configured. This changes ordering of some operations, in particular: - netlink notifications are sent after all changes have been performed. As a side effect this surpresses one unnecessary netlink message when the IFF_UP and other flags are changed simultaneously. - The NETDEV_UP/NETDEV_DOWN and NETDEV_CHANGE notifiers are invoked after all changes have been performed. Their relative is unchanged. - net_dmaengine_put() is invoked before the NETDEV_DOWN notifier instead of afterwards. This should not make any difference since both RX and TX are already shut down at this point. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* rtnetlink: handle rtnl_link netlink notifications manuallyPatrick McHardy2010-02-27
| | | | | | | | | | | | | | | In order to support specifying device flags during device creation, we must be able to roll back device registration in case setting the flags fails without sending any notifications related to the device to userspace. This patch changes rollback_registered_many() and register_netdevice() to manually send netlink notifications for devices not handled by rtnl_link and allows to defer notifications for devices handled by rtnl_link until setup is complete. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-02-27
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * netdevice.h: check for CONFIG_WLAN instead of CONFIG_WLAN_80211John W. Linville2010-02-26
| | | | | | | | | | | | | | | | | | | | | | In "wireless: remove WLAN_80211 and WLAN_PRE80211 from Kconfig" I inadvertantly missed a line in include/linux/netdevice.h. I thereby effectively reverted "net: Set LL_MAX_HEADER properly for wireless." by accident. :-( Now we should check there for CONFIG_WLAN instead. Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Cc: stable@kernel.org
* | net: Add netdev ops for SR-IOV configurationWilliams, Mitch A2010-02-12
| | | | | | | | | | | | | | | | Add netdev ops for configuring SR-IOV VF devices through the PF driver. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | include/linux/netdevice.h: Add netif_printk helpersJoe Perches2010-02-12
| | | | | | | | | | | | | | | | | | | | Add macros to test a private structure for msg_enable bits and the netif_msg_##bit to test and call netdev_printk if set Simplifies logic in callers and adds message logging consistency Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevice.h: Add netdev_printk helpers like dev_printkJoe Perches2010-02-12
| | | | | | | | | | | | | | | | | | | | | | | | | | These netdev_printk routines take a struct net_device * and emit dev_printk logging messages adding "%s: " ... netdev->dev.parent to the dev_printk format and arguments. This can create some uniformity in the output message log. These helpers should not be used until a successful alloc_netdev. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ethtool: Introduce n-tuple filter programming supportPeter P Waskiewicz Jr2010-02-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patchset enables the ethtool layer to program n-tuple filters to an underlying device. The idea is to allow capable hardware to have static rules applied that can assist steering flows into appropriate queues. Hardware that is known to support these types of filters today are ixgbe and niu. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use helpers to access mc list V2Jiri Pirko2010-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the similar helpers as those already done for uc list. However multicast lists are no list_head lists but "mademanually". The three macros added by this patch will make the transition of mc_list to list_head smooth in two steps: 1) convert all drivers to use these macros (with the original iterator of type "struct dev_mc_list") 2) once all drivers are converted, convert list type and iterators to "struct netdev_hw_addr" in one patch. >From now on, drivers can (and should) use "netdev_for_each_mc_addr" to iterate over the addresses with iterator of type "struct netdev_hw_addr". Also macros "netdev_mc_count" and "netdev_mc_empty" to read list's length. This is the state which should be reached in all drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: maintain namespace isolation between vlan and real deviceArnd Bergmann2010-02-03
| | | | | | | | | | | | | | | | | | | | | | | | In the vlan and macvlan drivers, the start_xmit function forwards data to the dev_queue_xmit function for another device, which may potentially belong to a different namespace. To make sure that classification stays within a single namespace, this resets the potentially critical fields. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use helpers to access uc list V2Jiri Pirko2010-01-25
| | | | | | | | | | | | | | This patch introduces three macros to work with uc list from net drivers. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdev: remove certain HAVE_ macrosAlexey Dobriyan2010-01-23
| | | | | | | | | | | | | | | | After netdev_ops compat code HAVE_* macros aren't needed, in fact they _will_ result in compile breakage for out of tree drivers. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: Unexport napi_gro_flush().David S. Miller2010-01-19
|/ | | | | | Nothing outside of net/core/dev.c uses it. Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: provide common routine for macvlan and vlan operstate managementPatrick Mullaney2009-12-03
| | | | | | | | | | Provide common routine for the transition of operational state for a leaf device during a root device transition. Signed-off-by: Patrick Mullaney <pmullaney@novell.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Implement for_each_netdev_reverse.Eric W. Biederman2009-12-01
| | | | | | | | | I will need this shortly to implement network namespace shutdown batching. For sanity sake network devices should be removed in the reverse order they were created in. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* veth: move loopback logic to common locationArnd Bergmann2009-11-26
| | | | | | | | | | | | | | | The veth driver contains code to forward an skb from the start_xmit function of one network device into the receive path of another device. Moving that code into a common location lets us reuse the code for direct forwarding of data between macvlan ports, and possibly in other drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* linkwatch: linkwatch_forget_dev() to speedup device dismantleEric Dumazet2009-11-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Herbert Xu a écrit : > On Tue, Nov 17, 2009 at 04:26:04AM -0800, David Miller wrote: >> Really, the link watch stuff is just due for a redesign. I don't >> think a simple hack is going to cut it this time, sorry Eric :-) > > I have no objections against any redesigns, but since the only > caller of linkwatch_forget_dev runs in process context with the > RTNL, it could also legally emit those events. Thanks guys, here an updated version then, before linkwatch surgery ? In this version, I force the event to be sent synchronously. [PATCH net-next-2.6] linkwatch: linkwatch_forget_dev() to speedup device dismantle time ip link del eth3.103 ; time ip link del eth3.104 ; time ip link del eth3.105 real 0m0.266s user 0m0.000s sys 0m0.001s real 0m0.770s user 0m0.000s sys 0m0.000s real 0m1.022s user 0m0.000s sys 0m0.000s One problem of current schem in vlan dismantle phase is the holding of device done by following chain : vlan_dev_stop() -> netif_carrier_off(dev) -> linkwatch_fire_event(dev) -> dev_hold() ... And __linkwatch_run_queue() runs up to one second later... A generic fix to this problem is to add a linkwatch_forget_dev() method to unlink the device from the list of watched devices. dev->link_watch_next becomes dev->link_watch_list (and use a bit more memory), to be able to unlink device in O(1). After patch : time ip link del eth3.103 ; time ip link del eth3.104 ; time ip link del eth3.105 real 0m0.024s user 0m0.000s sys 0m0.000s real 0m0.032s user 0m0.000s sys 0m0.001s real 0m0.033s user 0m0.000s sys 0m0.000s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add dev_txq_stats_fold() helperEric Dumazet2009-11-18
| | | | | | | | | Some drivers ndo_get_stats() method need to perform txqueue stats folding. Move folding from dev_get_stats() to a new dev_txq_stats_fold() function Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Optimize hard_start_xmit() return checkingJarek Poplawski2009-11-16
| | | | | | | | | | | | | | | | | Recent changes in the TX error propagation require additional checking and masking of values returned from hard_start_xmit(), mainly to separate cases where skb was consumed. This aim can be simplified by changing the order of NETDEV_TX and NET_XMIT codes, because the latter are treated similarly to negative (ERRNO) values. After this change much simpler dev_xmit_complete() is also used in sch_direct_xmit(), so it is moved to netdevice.h. Additionally NET_RX definitions in netdevice.h are moved up from between TX codes to avoid confusion while reading the TX comment. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipv6: use RCU to walk list of network devicesEric Dumazet2009-11-13
| | | | | | | | No longer need read_lock(&dev_base_lock), use RCU instead. We also can avoid taking references on inet6_dev structs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: allow to propagate errors through ->ndo_hard_start_xmit()Patrick McHardy2009-11-13
| | | | | | | | | | | | | | | | | | Currently the ->ndo_hard_start_xmit() callbacks are only permitted to return one of the NETDEV_TX codes. This prevents any kind of error propagation for virtual devices, like queue congestion of the underlying device in case of layered devices, or unreachability in case of tunnels. This patches changes the NET_XMIT codes to avoid clashes with the NETDEV_TX codes and changes the two callers of dev_hard_start_xmit() to expect either errno codes, NET_XMIT codes or NETDEV_TX codes as return value. In case of qdisc_restart(), all non NETDEV_TX codes are mapped to NETDEV_TX_OK since no error propagation is possible when using qdiscs. In case of dev_queue_xmit(), the error is propagated upwards. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: add netdev_continue_rcustephen hemminger2009-11-11
| | | | | | | | | This adds an RCU macro for continuing search, useful for some network devices like vlan. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cleanup include/linuxEric Dumazet2009-11-04
| | | | | | | | | | | | | | | This cleanup patch puts struct/union/enum opening braces, in first line to ease grep games. struct something { becomes : struct something { Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce for_each_netdev_rcu() iteratorEric Dumazet2009-11-04
| | | | | | | | | | | | | | | | | | | | | | | | Adds RCU management to the list of netdevices. Convert some for_each_netdev() users to RCU version, if it can avoid read_lock-ing dev_base_lock Ie: read_lock(&dev_base_loack); for_each_netdev(net, dev) some_action(); read_unlock(&dev_base_lock); becomes : rcu_read_lock(); for_each_netdev_rcu(net, dev) some_action(); rcu_read_unlock(); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce dev_get_by_name_rcu()Eric Dumazet2009-11-02
| | | | | | | | | | | | | | Some workloads hit dev_base_lock rwlock pretty hard. We can use RCU lookups to avoid touching this rwlock (and avoid touching netdevice refcount) netdevices are already freed after a RCU grace period, so this patch adds no penalty at device dismantle time. However, it adds a synchronize_rcu() call in dev_change_name() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Allow devices to specify a device specific sysfs group.Eric W. Biederman2009-10-30
| | | | | | | | This isn't beautifully abstracted, but it is simple, simplifies uses and so far is only needed for the bonding driver. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Change all receive functions to return GRO result codesBen Hutchings2009-10-30
| | | | | | | | | | | | This will allow drivers to adjust their receive path dynamically based on whether GRO is being applied successfully. Currently all in-tree callers ignore the return values of these functions and do not need to be changed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Name the GRO result enumeration typeBen Hutchings2009-10-30
| | | | | | | | | This clarifies which return and parameter types are GRO result codes and not RX result codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce dev_get_by_index_rcu()Eric Dumazet2009-10-29
| | | | | | | | | | | | | Some workloads hit dev_base_lock rwlock pretty hard. We can use RCU lookups to avoid touching this rwlock. netdevices are already freed after a RCU grace period, so this patch adds no penalty at device dismantle time. dev_ifname() converted to dev_get_by_index_rcu() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add ndo_fcoe_get_wwn to net_device_opsYi Zou2009-10-29
| | | | | | | | | | Add ndo_fcoe_get_wwn so Fiber Channel over Ethernet (FCoE) can make use of the provided World Wide Port Name (WWPN) and World Wide Node Name (WWNN) from the underlying network interface driver. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce unregister_netdevice_many()Eric Dumazet2009-10-28
| | | | | | | | | | Introduce rollback_registered_many() and unregister_netdevice_many() rollback_registered_many() is able to perform necessary steps at device dismantle time, factorizing two expensive synchronize_net() calls. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Introduce unregister_netdevice_queue()Eric Dumazet2009-10-28
| | | | | | | | | This patchs adds an unreg_list anchor to struct net_device, and introduces an unregister_netdevice_queue() function, able to queue a net_device to a list instead of immediately unregister it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-10-12
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
| * include/linux/netdevice.h: fix nanodoc mismatchWolfram Sang2009-10-07
| | | | | | | | | | | | | | nanodoc was missing an ndo_-prefix. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dcb: data center bridging ops should be r/oStephen Hemminger2009-10-07
|/ | | | | | | | The data center bridging ops structure can be const Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-09-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) be2net: fix some cmds to use mccq instead of mbox atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA pkt_sched: Fix qstats.qlen updating in dump_stats ipv6: Log the affected address when DAD failure occurs wl12xx: Fix print_mac() conversion. af_iucv: fix race when queueing skbs on the backlog queue af_iucv: do not call iucv_sock_kill() twice af_iucv: handle non-accepted sockets after resuming from suspend af_iucv: fix race in __iucv_sock_wait() iucv: use correct output register in iucv_query_maxconn() iucv: fix iucv_buffer_cpumask check when calling IUCV functions iucv: suspend/resume error msg for left over pathes wl12xx: switch to %pM to print the mac address b44: the poll handler b44_poll must not enable IRQ unconditionally ipv6: Ignore route option with ROUTER_PREF_INVALID bonding: make ab_arp select active slaves as other modes cfg80211: fix SME connect rc80211_minstrel: fix contention window calculation ssb/sdio: fix printk format warnings p54usb: add Zcomax XG-705A usbid ...
| * bonding: remap muticast addresses without using dev_close() and dev_open()Moni Shoua2009-09-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | driver model: constify attribute groupsDavid Brownell2009-09-15
|/ | | | | | | | | | Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* net: Add DEVTYPE support for Ethernet based devicesMarcel Holtmann2009-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Ethernet framing is used for a lot of devices these days. Most prominent are WiFi and WiMAX based devices. However for userspace application it is important to classify these devices correctly and not only see them as Ethernet devices. The daemons like HAL, DeviceKit or even NetworkManager with udev support tries to do the classification in userspace with a lot trickery and extra system calls. This is not good and actually reaches its limitations. Especially since the kernel does know the type of the Ethernet device it is pretty stupid. To solve this problem the underlying device type needs to be set and then the value will be exported as DEVTYPE via uevents and available within udev. # cat /sys/class/net/wlan0/uevent DEVTYPE=wlan INTERFACE=wlan0 IFINDEX=5 This is similar to subsystems like USB and SCSI that distinguish between hosts, devices, disks, partitions etc. The new SET_NETDEV_DEVTYPE() is a convenience helper to set the actual device type. All device types are free form, but for convenience the same strings as used with RFKILL are choosen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: reintroduce dev->qdisc for use by sch_apiPatrick McHardy2009-09-06
| | | | | | | | | | | | | | | | | | | | | | | | | Currently the multiqueue integration with the qdisc API suffers from a few problems: - with multiple queues, all root qdiscs use the same handle. This means they can't be exposed to userspace in a backwards compatible fashion. - all API operations always refer to queue number 0. Newly created qdiscs are automatically shared between all queues, its not possible to address individual queues or restore multiqueue behaviour once a shared qdisc has been attached. - Dumps only contain the root qdisc of queue 0, in case of non-shared qdiscs this means the statistics are incomplete. This patch reintroduces dev->qdisc, which points to the (single) root qdisc from userspace's point of view. Currently it either points to the first (non-shared) default qdisc, or a qdisc shared between all queues. The following patches will introduce a classful dummy qdisc, which will be used as root qdisc and contain the per-queue qdiscs as children. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add ndo_fcoe_enable/ndo_fcoe_disable to net_device_opsYi Zou2009-09-01
| | | | | | | | | | | | | | | | Add ndo_fcoe_enable/_disable to net_device_ops so the corresponding HW can initialize itself for FCoE traffic or clean up after FCoE traffic is done. This is expected to be called by the kernel FCoE stack upon receiving a request for creating an FCoE instance on the corresponding netdev interface. When implemented by the actual HW, the HW driver check the op code to perform corresponding initialization or clean up for FCoE. The initialization normally includes allocating extra queues for FCoE, setting corresponding HW registers for FCoE, indicating FCoE offload features via netdev, etc. The clean-up would include releasing the resources allocated for FCoE. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdev: change transmit to limited range typeStephen Hemminger2009-09-01
| | | | | | | | | The transmit function should only return one of three possible values, some drivers got confused and returned errno's or other values. This changes the definition so that this can be caught at compile time. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice: Consolidate to use existing macros where available.Krishna Kumar2009-08-31
| | | | | | | Patch compiled and 32 simultaneous netperf testing ran fine. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add NETIF_F_FCOE_MTU to indicate support for a different MTU for FCoEYi Zou2009-08-14
| | | | | | | | | | | Add NETIF_F_FCOE_MTU to indicate that the NIC can support a secondary MTU for converged traffic of LAN and Fiber Channel over Ethernet (FCoE). The MTU for FCoE is 2158 = 14 (FCoE header) + 24 (FC header) + 2112 (FC max payload) + 4 (FC CRC) + 4 (FCoE trailer). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove NET_RX_BAD and NET_RX_CN* definesFlorian Westphal2009-07-05
| | | | | | | | almost no users in the tree; and the few that use them treat them like NET_RX_DROP. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: group address list and its countJiri Pirko2009-06-18
| | | | | | | | | | | | | | | | | | | | | | | | This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
* netdevice.h: Use frag list abstraction interfaces.David S. Miller2009-06-09
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* gso: Stop fraglists from escapingHerbert Xu2009-06-04
| | | | | | | | | | | | | | | | | | | | As it stands skb fraglists can get past the check in dev_queue_xmit if the skb is marked as GSO. In particular, if the packet doesn't have the proper checksums for GSO, but can otherwise be handled by the underlying device, we will not perform the fraglist check on it at all. If the underlying device cannot handle fraglists, then this will break. The fix is as simple as moving the fraglist check from the device check into skb_gso_ok. This has caused crashes with Xen when used together with GRO which can generate GSO packets with fraglists. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: convert unicast addr listJiri Pirko2009-05-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: allow bond in mode balance-alb to work properly in bridge -try4.3Jiri Pirko2009-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [PATCH net-next] bonding: allow bond in mode balance-alb to work properly in bridge -try4.3 (updated) changes v4.2 -> v4.3 - memcpy the address always, not just in case it differs from master->dev_addr - compare_ether_addr_64bits() is not used so there is no direct need to make new header file (I think it would be good to have bond stuff in separate file anyway). changes v4.1 -> v4.2 - use skb->pkt_type == PACKET_HOST compare rather then comparing skb dest addr against skb->dev->dev_addr The problem is described in following bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=487763 Basically here's what's going on. In every mode, bonding interface uses the same mac address for all enslaved devices (except fail_over_mac). Only balance-alb will simultaneously use multiple MAC addresses across different slaves. When you put this kind of bond device into a bridge it will only add one of mac adresses into a hash list of mac addresses, say X. This mac address is marked as local. But this bonding interface also has mac address Y. Now then packet arrives with destination address Y, this address is not marked as local and the packed looks like it needs to be forwarded. This packet is then lost which is wrong. Notice that interfaces can be added and removed from bond while it is in bridge. *** When the multiple addresses for bridge port approach failed to solve this issue due to STP I started to think other way to solve this. I returned to previous solution but tweaked one. This patch solves the situation in the bonding without touching bridge code. For every incoming frame to bonding the destination address is compared to current address of the slave device from which tha packet came. If these two match destination address is replaced by mac address of the master. This address is known by bridge so it is delivered properly. Note that the comparsion is not made directly, it's used skb->pkt_type == PACKET_HOST instead. This is "set" previously in eth_type_trans(). I experimentally tried that this works as good as searching through the slave list (v4 of this patch). Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 07:30:01 -0500