aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/libata.h
Commit message (Collapse)AuthorAge
* libata: kill ATA_ENABLE_PATAJeff Garzik2007-02-09
| | | | | | | The ATA_ENABLE_PATA define was never meant to be permanent, and in recent kernels, it's already been unconditionally enabled. Remove. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add another IRQ calls (core and headers)Akira Iguchi2007-02-09
| | | | | | | | | | | | | | | | | | This patch is against the libata core and headers. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: convert to iomapTejun Heo2007-02-09
| | | | | | | | | | | | | | | | Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: remove unused functionsTejun Heo2007-02-09
| | | | | | | | Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: update libata core layer to use devresTejun Heo2007-02-09
| | | | | | | | | | | | | | | | | | | | | | Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ata_host_detach()Tejun Heo2007-02-09
| | | | | | | | | | Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill qc->nsect and cursectTejun Heo2007-02-09
| | | | | | | | | | | | libata used two separate sets of variables to record request size and current offset for ATA and ATAPI. This is confusing and fragile. This patch replaces qc->nsect/cursect with qc->nbytes/curbytes and kills them. Also, ata_pio_sector() is updated to use bytes for qc->cursg_ofs instead of sectors. The field used to be used in bytes for ATAPI and in sectors for ATA. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: handle pci_enable_device() failure while resumingTejun Heo2007-02-09
| | | | | | | | | Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] pci: Move PCI_VDEVICE from libata to coreAlan Cox2007-02-09
| | | | | | | | | Updated diff which doesn't move the comment as per Jeff's request and corrects the docs as per report on l/k Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] trim trailing whitespaceJeff Garzik2007-02-09
| | | | | | Most of these contributed by that mysterious figger known as A.C. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Fix ata_busy_wait() kernel docsAlan2007-02-02
| | | | | | | | | | | | > Looks like you should use ata_busy_wait() here, rather than reproducing > the same code again. It waits in 10uS chunks while 1uS chunks were used in the workaround. Could indeed do that once I know the fix is right. While I'm at it the ata_busy_wait kerneldoc is borked so here's a fix Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ATA_FLAG_IGN_SIMPLEX and use it in sata_uliTejun Heo2007-01-25
| | | | | | | | | | Some uli controllers have stuck SIMPLEX bit which can't be cleared with ata_pci_clear_simplex(), but the controller is capable of doing DMAs on both channels simultaneously. Implement ATA_FLAG_IGN_SIMPLEX which makes libata ignore the simplex bit and use it in sata_uli. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: set_mode, Fix the FIXMEAlan2007-01-24
| | | | | | | | When set_mode() changed ->set_mode didn't adapt. This makes the needed changes and removes the relevant FIXME case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Initialize qc->pad_lenBrian King2007-01-24
| | | | | | | | | Initialize qc->pad_len for each new command. This ensures that pad_len is not set to a stale value for zero data length commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Fixup n_elem initializationBrian King2007-01-24
| | | | | | | | | | | Fixup the inialization of qc->n_elem. It currently gets initialized to 1 for commands that do not transfer any data. Fix this by initializing n_elem to 0 and only setting to 1 in ata_scsi_qc_new when there is data to transfer. This fixes some problems seen with SATA devices attached to ipr adapters. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: initialize qc->dma_dir to DMA_NONETejun Heo2007-01-19
| | | | | | | | | | | | | | | | | | | | libata didn't used to init qc->dma_dir to any specific value on qc initialization and command translation path didn't set qc->dma_dir if the command doesn't need data transfer. This made non-data commands to have random qc->dma_dir. This usually doesn't cause problem because LLDs usually check qc->protocol first and look at qc->dma_dir iff the command needs data transfer but this doesn't hold for all LLDs. It might be worthwhile to rename qc->dma_dir to qc->data_dir as we use the field to tag data direction for both PIO and DMA protocols. This problem has been spotted by James Bottomley. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' of ↵David Howells2006-12-05
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: drivers/ata/libata-scsi.c include/linux/libata.h Futher merge of Linus's head and compilation fixups. Signed-Off-By: David Howells <dhowells@redhat.com>
| * [PATCH] libata: always use polling IDENTIFYTejun Heo2006-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: implement ATA_FLAG_SETXFER_POLLING and use it in pata_via, ↵Tejun Heo2006-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | take #2 This patch implements ATA_FLAG_SETXFER_POLLING and use in pata_via. If this flag is set, transfer mode setting performed by polling not by interrupt. This should help those controllers which raise interrupt before the command is actually complete on SETXFER. Rationale for this approach. * uses existing facility and relatively simple * no busy sleep in the interrupt handler * updating drivers is easy While at it, kill now unused flag ATA_FLAG_SRST in pata_via. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: remove unused HSM_ST_UNKNOWNTejun Heo2006-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HSM_ST_UNKNOWN is not used anywhere. Its value is zero and supposed to serve sanity check purpose but HSM_ST_IDLE is used for that purpose. This unused state causes confusion. After a port is initialized but before the first command is executed, the idle hsm state is UNKNOWN. However, once a command has completed, the idle hsm state is IDLE. This defeats sanity check in ata_pio_task() for the first command. This patch removes HSM_ST_UNKNOWN and consequently make HSM_ST_IDLE the default state. Signed-off-by: Tejun Heo <htejun@gmail.com>
| * [PATCH] libata: implement presence detection via polling IDENTIFYTejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limitTejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many drives support LBA48 even when its capacity is smaller than 1<<28, as LBA48 is required for many functionalities. FLUSH_EXT is mandatory for drives w/ LBA48 support. Interestingly, at least one of such drives (ST960812A) has problems dealing with FLUSH_EXT. It eventually completes the command but takes around 7 seconds to finish in many cases thus drastically slowing down IO transactions. This seems to be a firmware bug which sneaked into production probably because no other ATA driver including linux IDE issues FLUSH_EXT to drives which report support for LBA48 & FLUSH_EXT but is smaller than 1<<28 blocks. This patch adds ATA_DFLAG_FLUSH_EXT which is set iff the drive supports LBA48 & FLUSH_EXT and is larger than LBA28 limit. Both cache flush paths are updated to issue FLUSH_EXT only when the flag is set. Note that the changed behavior is more inline with the rest of libata. libata prefers shorter commands whenever possible. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Danny Kukawka <dkukawka@novell.com> Cc: Stefan Seyfried <seife@novell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: implement ATA_EHI_SETMODE and ATA_EHI_POST_SETMODETejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata EH used to perform ata_set_mode() iff the EH session performed reset as indicated by ATA_EHI_DID_RESET. This is incorrect because ->dev_config() called by revalidation is allowed to modify transfer mode which ata_set_mode() should take care of. This patch implements the following two flags. * ATA_EHI_SETMODE: set during EH to schedule ata_set_mode(). Both new device attachment and revalidation set this flag. * ATA_EHI_POST_SETMODE: set while the device is revalidated after ata_set_mode(). Post-setmode revalidation is different from initial configuaration and EH revalidation in that ->dev_config() is not allowed tune transfer mode. LLD can use this flag to determine whether it's allowed to tune transfer mode. Note that POST_SETMODE ->dev_config() is guaranteed to be preceded by non-POST_SETMODE ->dev_config(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: implement ATA_EHI_PRINTINFOTejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: separate out and export sata_port_hardreset()Tejun Heo2006-12-01
| | | | | | | | | | | | | | | | Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: move ata_irq_on() into libata-sff.cTejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: handle 0xff status properlyTejun Heo2006-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata waits for !BSY even when the status register reports 0xff. This causes long boot delays when D8 isn't pulled down properly. This patch does the followings. * don't wait if status register is 0xff in all wait functions * make ata_busy_sleep() return 0 on success and -errno on failure. -ENODEV is returned on 0xff status and -EBUSY on other failures. * make ata_bus_softreset() succeed on 0xff status. 0xff status is not reset failure. It indicates no device. This removes unnecessary retries on such ports. Note that the code change assumes unoccupied port reporting 0xff status does not produce valid device signature. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Joe Jin <lkmaillist@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * [PATCH] libata: Revamp blacklist support to allow multiple kinds of ↵Alan Cox2006-12-01
| | | | | | | | | | | | | | | | | | | | blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells2006-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
* | WorkStruct: Separate delayable and non-delayable events.David Howells2006-11-22
|/ | | | | | | | | | | | Separate delayable work items from non-delayable work items be splitting them into a separate structure (delayed_work), which incorporates a work_struct and the timer_list removed from work_struct. The work_struct struct is huge, and this limits it's usefulness. On a 64-bit architecture it's nearly 100 bytes in size. This reduces that by half for the non-delayable type of event. Signed-Off-By: David Howells <dhowells@redhat.com>
* [PATCH] libata: unexport ata_dev_revalidate()Tejun Heo2006-10-31
| | | | | | | | ata_dev_revalidate() isn't used outside of libata core. Unexport it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: typo fixTejun Heo2006-10-21
| | | | | | | Typo fix in commment. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] libata: turn off NCQ if queue depth is adjusted to 1Tejun Heo2006-09-30
| | | | | | Turn off NCQ if queue depth is adjusted to 1. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: cosmetic changes to constantsTejun Heo2006-09-30
| | | | | | | Cosmetic changes to ATA_DFLAG_* constants for soon-to-follow NCQ-off patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Use new PCI_VDEVICE() macro to dramatically shorten ID listsJeff Garzik2006-09-27
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] No need for all those arch libata-portmap.h headersJeff Garzik2006-09-25
| | | | | | | They all contain the same thing. Instead, have a single generic one in include/asm-generic, and permit an arch to override as needed. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: improve handling of diagostic fail (and hardware that ↵Alan Cox2006-09-19
| | | | | | | | | | | | | | | | misreports it) Our ATA probe code checks that a device is not reporting a diagnostic failure during start up. Unfortunately at least one device seems to like doing this - the Gigabyte iRAM. This is only done for the master right now (which is fine for the iRAM as it is SATA), as with PATA some combinations of ATAPI device seem to fool the check into seeing a drive that isn't there if it is applied to the slave. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: fix non-uniform ports handlingTejun Heo2006-09-19
| | | | | | | | | | | | | | | | | | | | | | | | Non-uniform ports handling got broken while updating libata to handle those in the same host. Only separate irq for the non-uniform secondary port was implemented while all other fields (host flags, transfer mode...) of the secondary port simply shared those of the first. For ata_piix combined mode, which ATM is the only user of non-uniform ports, this causes the secondary port assume the wrong type. This can cause PATA port to use SATA ops, which results in bogus check on PCS and detection failure. This patch adds ata_probe_ent->pinfo2 which points to optional port_info for the secondary port. For the time being, this seems to be the simplest solution. This workaround will be removed together with ata_probe_ent itself after init model is updated to allow more flexibility. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Nelson A. de Oliveira <naoliv@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'upstream' into pata-driversJeff Garzik2006-08-31
|\
| * [libata] Trim trailing whitespace.Jeff Garzik2006-08-31
| |
* | [libata] Add a bunch of PATA drivers.Jeff Garzik2006-08-29
|/ | | | | | | | The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Grand renaming.Jeff Garzik2006-08-24
| | | | | | | | | | | | | | | | | | | | | | | | The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: Add CompactFlash supportAlan Cox2006-08-14
| | | | | | | | The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [ATA] Increase lba48 max-sectors from 200 to 256.Jeff Garzik2006-08-10
| | | | | | | | | Also, moved ATA_MAX_SECTORS and ATA_MAX_SECTORS_LBA48 from linux/libata.h to linux/ata.h, now that they truly reflect the standard (well... mostly; note TODO comment). This changes the performance profile (and potential bug profile) for a bunch of drivers, so be wary.
* [PATCH] libata: kill unused hard_port_no and legacy_modeTejun Heo2006-08-10
| | | | | | Kill unused probe_ent/ap->hard_port_no and probe_ent->legacy_mode. Signed-off-by: Tejun Heo <htejun@gmail.com>
* [PATCH] libata: implement dummy portTejun Heo2006-08-10
| | | | | | | | | | | | | | | | | | Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
* [PATCH] libata: rework legacy handling to remove much of the cruftAlan Cox2006-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kill host_set->next Fix simplex support Allow per platform setting of IDE legacy bases Some of this can be tidied further later on, in particular all the legacy port gunge belongs as a PCI quirk/PCI header decode to understand the special legacy IDE rules in the PCI spec. Longer term Jeff also wants to move the request_irq/free_irq out of core which will make this even cleaner. tj: folded in three followup patches - ata_piix-fix, broken-arch-fix and fix-new-legacy-handling, and separated per-dev xfermask into separate patch preceding this one. Folded in fixes are... * ata_piix-fix: fix build failure due to host_set->next removal * broken-arch-fix: add missing include/asm-*/libata-portmap.h * fix-new-legacy-handling: * In ata_pci_init_legacy_port(), probe_num was incorrectly incremented during initialization of the secondary port and probe_ent->n_ports was incorrectly fixed to 1. * Both legacy ports ended up having the same hard_port_no. * When printing port information, both legacy ports printed the first irq. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Tejun Heo <htejun@gmail.com>
* [PATCH] libata: Add support for SATA attachment to SAS adaptersBrian King2006-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: Add ata_host_set_initBrian King2006-08-09
| | | | | | | Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-19 08:31:15 -0500