aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/libata.h
Commit message (Collapse)AuthorAge
* libata: automatically use DMADIR if drive/bridge requires itTejun Heo2008-02-24
| | | | | | | | | | | | | | | | | | | | | | Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata: fix sparse warning in libata.hHarvey Harrison2008-02-20
| | | | | | | | | | | | | Avoids lots of these, also is more readable. include/linux/libata.h:1210:13: warning: potentially expensive pointer subtraction Change the subtraction to addition on the other side of the comparison. Thanks to Christer Weinigel for the suggestion. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: eliminate the home grown dma padding in favour ofJames Bottomley2008-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* libata: kill now unused n_iter and fix sata_fslJames Bottomley2008-02-06
| | | | | | | | | | | | | | qc->n_iter was used for libata's own sg walking before sg chaining replaced it. During conversion, the field and its usage in sata_fsl were left behind. Kill the filed and update sata_fsl. tj: This was part of James's libata-use-block-layer-padding patch. Separated out by me. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: factor out ata_pci_activate_sff_host() from ata_pci_one()Tejun Heo2008-01-23
| | | | | | | | | | | | Factor out ata_pci_activate_sff_host() from ata_pci_one(). This does about the same thing as ata_host_activate() but needs to be separate because SFF controllers use different and multiple IRQs in legacy mode. This will be used to make SFF LLD initialization more flexible. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: make ata_port_queue_task() an internal functionJeff Garzik2008-01-23
| | | | | | | | | ata_port_queue_task() served a single user: ata_pio_task() Rename to ata_pio_queue_task() and un-export it, as nobody outside of libata-core.c uses it. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: make qc->nbytes include extra buffersTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | | qc->nbytes didn't use to include extra buffers setup by libata core layer and my be odd. This patch makes qc->nbytes include any extra buffers setup by libata core layer and guaranteed to be aligned on 4 byte boundary. This value is to be used to program the host controller. As this represents the actual length of buffer available to the controller and the controller must be able to deal with short transfers for ATAPI commands which can transfer variable length, this shouldn't break any controllers while making problems like rounding-down and controllers choking up on odd transfer bytes much less likely. The unmodified value is stored in new field qc->raw_nbytes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: convert to chained sgTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill non-sg DMA interfaceTejun Heo2008-01-23
| | | | | | | | | | | | | | | | With atapi_request_sense() converted to use sg, there's no user of non-sg interface. Kill non-sg interface. * ATA_QCFLAG_SINGLE and ATA_QCFLAG_SG are removed. ATA_QCFLAG_DMAMAP is used instead. (this way no LLD change is necessary) * qc->buf_virt is removed. * ata_sg_init_one() and ata_sg_setup_one() are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Rusty Russel <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: update ->data_xfer hook for ATAPITejun Heo2008-01-23
| | | | | | | | | | | | | | | | | Depending on how many bytes are transferred as a unit, PIO data transfer may consume more bytes than requested. Knowing how much data is consumed is necessary to determine how much is left for draining. This patch update ->data_xfer such that it returns the number of consumed bytes. While at it, it also makes the following changes. * s/adev/dev/ * use READ/WRITE constants for rw indication * misc clean ups Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add ATAPI_* cmd types and implement atapi_cmd_type()Tejun Heo2008-01-23
| | | | | | | | | | Add ATAPI command types - ATAPI_READ, WRITE, RW_BUF, READ_CD and MISC, and implement atapi_cmd_type() which takes SCSI opcode and returns to which class the opcode belongs. This will be used later to improve ATAPI handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask()Tejun Heo2008-01-23
| | | | | | | | | | | | | | | | Reimplement ata_acpi_cbl_80wire() using ata_acpi_gtm_xfermask() and while at it relocate the function below ata_acpi_gtm_xfermask(). New ata_acpi_cbl_80wire() implementation takes @gtm, in both pata_via and pata_amd, use the initial GTM value. Both are trying to peek initial BIOS configuration, so using initial caching value makes sense. This fixes ACPI part of cable detection in pata_amd which previously always returned 0 because configuring PIO0 during reset clears DMA configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ata_timing_cycle2mode() and use it in libata-acpi and ↵Tejun Heo2008-01-23
| | | | | | | | | | | | | | pata_acpi libata-acpi is using separate timing tables for transfer modes although libata-core has the complete ata_timing table. Implement ata_timing_cycle2mode() to look for matching mode given transfer type and cycle duration and use it in libata-acpi and pata_acpi to replace private timing tables. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: separate out ata_acpi_gtm_xfermask() from pacpi_discover_modes()Tejun Heo2008-01-23
| | | | | | | | | | | | | | Finding out matching transfer mode from ACPI GTM values is useful for other purposes too. Separate out the function and timing tables from pata_acpi::pacpi_discover_modes(). Other than checking shared-configuration bit after doing ata_acpi_gtm() in pacpi_discover_modes() which should be safe, this patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add ATA_CBL_PATA_IGNTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | ATA_CBL_PATA_UNK indicates that the cable type can't be determined from the host side and might be either 80c or 40c. libata applies drive or other generic limit in this case. However, there are controllers where both host and drive side detections are misimplemented and the driver has to rely solely on private method - peeking BIOS or ACPI configuration or using some other private mechanism. This patch adds ATA_CBL_PATA_IGN which tells libata to ignore the cable type completely and just let the LLD determine the transfer mode via host transfer mode masks and ->mode_filter(). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: xfer_mask is unsigned long not unsigned intTejun Heo2008-01-23
| | | | | | | | Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill ata_id_to_dma_mode()Tejun Heo2008-01-23
| | | | | | | | | | | | ata_id_to_dma_mode() isn't quite generic. The function is basically privately implemented ata_id_xfermask() combined with hardcoded mode printing and configuration which are specific to ata_generic. Kill the function and open code it in generic_set_mode() using generic xfermode handling functions. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: clean up xfermode / PATA timing related stuffTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: export xfermode / PATA timing related functionsTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | | | Export the following xfermode related functions. * ata_pack_xfermask() * ata_unpack_xfermask() * ata_xfer_mask2mode() * ata_xfer_mode2mask() * ata_xfer_mode2shift() * ata_mode_string() * ata_id_xfermask() * ata_timing_find_mode() These functions will be used later by LLD updates. While at it, change unsigned short @speed to u8 @xfer_mode in ata_timing_find_mode() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ATA_DFLAG_DUBIOUS_XFERTejun Heo2008-01-23
| | | | | | | | | | | ATA_DFLAG_DUBIOUS_XFER is set whenever data transfer speed or method changes and gets cleared when data transfer command succeeds in the newly configured transfer mode. This will be used to improve speed down logic. Signed-off-by: Tejun Heo <htejun@gmail.com< Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: clean up EH speed down implementationTejun Heo2008-01-23
| | | | | | | | | | | | | | | | | | | | Clean up EH speed down implementation. * is_io boolean variable is replaced eflags. is_io is ATA_EFLAG_IS_IO. * Error categories now have names. * Better comments. * Reorder 5min and 10min rules in ata_eh_speed_down_verdict() * Use local variable @link to cache @dev->link in ata_eh_speed_down() These changes are to improve readability and ease further changes. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: rearrange ATA_DFLAG_*Tejun Heo2008-01-23
| | | | | | | | Area for DFLAGs which are cleared on INIT is full. Extend it by 8 bits. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: fix ATAPI drainingTejun Heo2007-12-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: implement dev->gtf_cache and evaluate _GTF right after _STM ↵Tejun Heo2007-12-17
| | | | | | | | | | | | | | | | | | | | | | during resume On certain implementations, _GTF evaluation depends on preceding _STM and both can be pretty picky about the configuration. Using _GTM result cached during controller initialization satisfies the most neurotic _STM implementation. However, libata evaluates _GTF after reset during device configuration and the hardware state can be different from what _GTF expects and can cause evaluation failure. This patch adds dev->gtf_cache and updates ata_dev_get_GTF() such that it uses the cached value if available. Cache is cleared with a call to ata_acpi_clear_gtf(). Because for SATA ACPI nodes _GTF must be evaluated after _SDD which can't be done till IDENTIFY is complete, _GTF caching from ata_acpi_on_resume() is used only for IDE ACPI nodes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: implement and use ata_acpi_init_gtm()Tejun Heo2007-12-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | _GTM fetches currently configured transfer mode while _STM configures controller according to _GTM parameter and prepares transfer mode configuration TFs for _GTF. In many cases _GTM and _STM implementations are quite brittle and can't cope with configuration changed by libata. libata does not depend on ATA ACPI to configure devices. The only reason libata performs _GTM and _STM are to make _GTF evaluation succeed and libata also doesn't care about how _GTF TFs configure transfer mode. It overrides that configuration anyway, so from libata's POV, it doesn't matter what value is feeded to _STM as long as evaluation succeeds for _STM and following _GTF. This patch adds dev->__acpi_init_gtm and store initial _GTM values on host initialization before modified by reset and mode configuration. If the field is valid, ata_acpi_init_gtm() returns pointer to the saved _GTM structure; otherwise, NULL. This saved value is used for _STM during resume and peek at BIOS/firmware programmed initial timing for later use. The accessor is there to make building w/o ACPI easy as dev->__acpi_init doesn't exist if ACPI is not enabled. On driver detach, the initial BIOS configuration is restored by executing _STM with the initial _GTM values such that the next driver can also use the initial BIOS configured values. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: update ata_*_printk() macros such that level can be a variableTejun Heo2007-12-17
| | | | | | | | Make prink helpers format @lv together rather than prepending to the format string as constant. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-acpi: adjust constness in ata_acpi_gtm/stm() parametersTejun Heo2007-12-17
| | | | | | | | | | * No internal function uses const ata_port. Drop const from @ap. * Make ata_acpi_stm() copy @stm before using it and change @stm to const. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: workaround DRQ=1 ERR=1 for ATAPI tape drivesAlbert Lee2007-11-18
| | | | | | | | | | | | | After an error condition, some ATAPI tape drives set DRQ=1 together with ERR=1 when asking the host to transfer the CDB of the next packet command (i.e. request sense). This patch, a revised version of Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR to workaround the problem by ignoring the ERR bit and proceed sending the CDB. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com>
* libata: remove unused functionsAdrian Bunk2007-11-18
| | | | | | | | | | | This patch removes the following obsolete functions: - libata-core.c: __sata_phy_reset() - libata-core.c: sata_phy_reset() - libata-eh.c: ata_qc_timeout() - libata-eh.c: ata_eng_timeout() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Tejun Heo <htejun@gmail.com>
* libata: handle broken cable reportingAlan Cox2007-11-05
| | | | | | | | | | | | | One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement and use ATA_QCFLAG_QUIETTejun Heo2007-10-30
| | | | | | | | | | | | | | | | | | | | Implement ATA_QCFLAG_QUIET which indicates that there's no need to report if the command fails with AC_ERR_DEV and set it for passthrough commands. Combined with previous changes, this now makes device errors for all direct commands reported directly to the issuer without going through EH actions and reporting. Note that EH is still invoked after non-IO device errors to determine the nature of the error and resume command execution (some controller requires special care after error to continue). It just performs default maintenance after error, examines what's going on, realizes that it's none of its business and reports the command failure without logging any error messages. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Link power management infrastructureKristen Carlson Accardi2007-10-29
| | | | | | | | | | | | | | | | | | | | | | Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: implement ata_wait_after_reset()Tejun Heo2007-10-29
| | | | | | | | | | | | | | | | | | | | | | On certain device/controller combination, 0xff status is asserted after reset and doesn't get cleared during 150ms post-reset wait. As 0xff status is interpreted as no device (for good reasons), this can lead to misdetection on such cases. This patch implements ata_wait_after_reset() which replaces the 150ms sleep and waits upto ATA_TMOUT_FF_WAIT if status is 0xff. ATA_TMOUT_FF_WAIT is currently 800ms which is enough for HHD424020F7SV00 to get detected but not enough for Quantum GoVault drive which is known to take upto 2s. Without parallel probing, spending 2s on 0xff port would incur too much delay on ata_piix's which use 0xff to indicate empty port and doesn't have SCR register, so GoVault needs to wait till parallel probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: track SLEEP state and issue SRST to wake it upTejun Heo2007-10-29
| | | | | | | | | | | | | | | ATA devices in SLEEP mode don't respond to any commands. SRST is necessary to wake it up. Till now, when a command is issued to a device in SLEEP mode, the command times out, which makes EH reset the device and retry the command after that, causing a long delay. This patch makes libata track SLEEP state and issue SRST automatically if a command is about to be issued to a device in SLEEP. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Bruce Allen <ballen@gravity.phys.uwm.edu> Cc: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] checkpatch-inspired cleanupsJeff Garzik2007-10-23
| | | | | | | | | | | | Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] kill ata_sg_is_last()Jeff Garzik2007-10-18
| | | | | | | | | | | | | | | Short term, this works around a bug introduced by early sg-chaining work. Long term, removing this function eliminates a branch from a hot path loop in each scatter/gather table build. Also, as this code demonstrates, we don't need to _track_ the end of the s/g list, as long as we mark it in some way. And doing so programatically is nice. So its a useful cleanup, regardless of its short term effects. Based conceptually on a quick patch by Jens Axboe. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: convert to using sg helpersJens Axboe2007-10-16
| | | | | | | This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [libata] struct pci_dev related cleanupsJeff Garzik2007-10-12
| | | | | | | | | | | | | | | | | * remove pointless pci_dev_to_dev() wrapper. Just directly reference the embedded struct device like everyone else does. * pata_cs5520: delete cs5520_remove_one(), it was a duplicate of ata_pci_remove_one() * linux/libata.h: don't bother including linux/pci.h, we don't need it. Simply declare 'struct pci_dev' and assume interested parties will include the header, as they should be doing anyway. * linux/libata.h: consolidate all CONFIG_PCI declarations into a single location in the header. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: use ata_exec_internal() for PMP register accessTejun Heo2007-10-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PMP registers used to be accessed with dedicated accessors ->pmp_read and ->pmp_write. During reset, those callbacks are called with the port frozen so they should be able to run without depending on interrupt delivery. To achieve this, they were implemented polling. However, as resetting the host port makes the PMP to isolate fan-out ports until SError.X is cleared, resetting fan-out ports while port is frozen doesn't buy much additional safety. This patch updates libata PMP support such that PMP registers are accessed using regular ata_exec_internal() mechanism and kills ->pmp_read/write() callbacks. The following changes are made. * PMP access helpers - sata_pmp_read_init_tf(), sata_pmp_read_val(), sata_pmp_write_init_tf() are folded into sata_pmp_read/write() which are now standalone PMP register access functions. * sata_pmp_read/write() returns err_mask instead of rc. This is consistent with other functions which issue internal commands and allows more detailed error reporting. * ahci interrupt handler is modified to ignore BAD_PMP and spurious/illegal completion IRQs while reset is in progress. These conditions are expected during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ATA_PFLAG_RESETTINGTejun Heo2007-10-12
| | | | | | | | | | | | | Implement ATA_PFLAG_RESETTING. This flag is set while reset is in progress. It's set before prereset is called and cleared after reset fails or postreset is finished. This flag itself doesn't have any function. It will be used by LLDs to tell whether reset is in progress if it needs to behave differently during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-core: Expose gtm methods for driver useAlan Cox2007-10-12
| | | | | | | | | | | Talk to the dark side our driver has to, yes. Much misleading is the data. Store it in a structure we do so that it may be parsed. Signed-off-by: Alan Cox <alan@redhat.com> -- Whats small, old and shouts phrases out of order across mountains ? Yodla.. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: Add a drivers/ide style DMA disableAlan Cox2007-10-12
| | | | | | | | | | | | | | | | | | | | | | | This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata-pmp: implement qc_defer for command switching PMP supportTejun Heo2007-10-12
| | | | | | | | Implement sata_pmp_qc_defer_cmd_switch() - standard qc_defer for command switching PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp: implement Port Multiplier supportTejun Heo2007-10-12
| | | | | | | | | | | | | | | | | | | | | Implement Port Multiplier support. To support PMP, a LLDD has to supply ops->pmp_read() and pmp_write(). If non-null, ->pmp_attach and ->pmp_detach are called on PMP attach and detach, respectively. ->pmp_read/write() can be called while the port is frozen, so they must be implemented by polling. This patch supplies several helpers to ease ->pmp_read/write() implementation. Also, irq_handler and error_handler must be PMP aware. Most of PMP aware EH can be done by calling ata_pmp_do_eh() with appropriate methods. PMP EH uses separate set of reset methods and this patch implements standard prereset, hardreset and postreset methods. This patch only implements PMP support. The next patch will integrate PMP into the reset of libata and thus enable PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: Fix HPA handling regressionAlan Cox2007-10-12
| | | | | | | | | Restore the support for handling drives that report one sector too many (ie SCSI not ATA style). This worked before the HPA update but was removed in that process. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp-prep: implement sata_async_notification()Tejun Heo2007-10-12
| | | | | | | | | | | | | AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp-prep: implement ATA_HORKAGE_SKIP_PMTejun Heo2007-10-12
| | | | | | | | | Some pseudo devices fail PM commands unnecessarily aborting system suspend. Implement ATA_HORKAGE_SKIP_PM which makes libata skip PM commands for these devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp-prep: implement ATA_LFLAG_DISABLEDTejun Heo2007-10-12
| | | | | | | | | | | Implement ATA_LFLAG_DISABLED. The flag indicates the link is disabled due to EH recovery failure. While a link is disabled, no EH action is taken on the link and suspend/resume become noop too. This will be used by PMP links to manage failed links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp-prep: implement ATA_LFLAG_NO_RETRYTejun Heo2007-10-12
| | | | | | | | | | Some PMP links are connected to internal pseudo devices which may come and go depending on situation. There's no reason to try hard to recover them. ATA_LFLAG_NO_RETRY tells EH to not retry if the device attached to the link fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-pmp-prep: implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMBTejun Heo2007-10-12
| | | | | | | | | | | | Some links on some PMPs locks up on SRST and/or report incorrect device signature. Implement ATA_LFLAG_NO_SRST, ASSUME_ATA and ASSUME_SEMB to handle these quirky links. NO_SRST makes EH avoid SRST. ASSUME_ATA and SEMB forces class code to ATA and SEMB_UNSUP respectively. Note that SEMB isn't currently supported yet so the _UNSUP variant is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-25 13:05:02 -0500