aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/if_vlan.h
Commit message (Collapse)AuthorAge
* vlan: mask vlan prio bitsEric Dumazet2013-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2013-07-03
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: vlan: fix comment for vlan_ethhdr->h_vlan_protoOlaf Hering2013-06-20
| | | | | | | | | | | | | | | | After addition of 8021AD h_vlan_proto can be either ETH_P_8021Q or ETH_P_8021AD. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: vlan: minor: remove unused HAVE_VLAN_PUT_TAGDaniel Borkmann2013-06-07
|/ | | | | | | | Remove the definition of HAVE_VLAN_PUT_TAG since it's not used or exported anywhere. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: fix dummy function signatures for CONFIG_VLAN=nPatrick McHardy2013-04-21
| | | | | | | | | | Fix up some function signatures for CONFIG_VLAN=n that were missed during the 802.1ad support patches. Found by the kbuild robot. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: add 802.1ad supportPatrick McHardy2013-04-19
| | | | | | | | | | | | | | | | | | | | | Add support for 802.1ad VLAN devices. This mainly consists of checking for ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check offloading capabilities based on the used protocol. Configuration is done using "ip link": # ip link add link eth0 eth0.1000 \ type vlan proto 802.1ad id 1000 # ip link add link eth0.1000 eth0.1000.1000 \ type vlan proto 802.1q id 1000 52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64 92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84) 20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: add protocol argument to packet tagging functionsPatrick McHardy2013-04-19
| | | | | | | | | | Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: prepare for 802.1ad supportPatrick McHardy2013-04-19
| | | | | | | | Make the encapsulation protocol value a property of VLAN devices and change the device lookup functions to take the protocol value into account. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy2013-04-19
| | | | | | | | | Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy2013-04-19
| | | | | | | | | | Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add ETH_P_802_3_MINSimon Horman2013-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: adjust vlan_set_encap_proto() for its callersCong Wang2013-02-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two places to call vlan_set_encap_proto(): vlan_untag() and __pop_vlan_tci(). vlan_untag() assumes skb->data points after mac addr, otherwise the following code vhdr = (struct vlan_hdr *) skb->data; vlan_tci = ntohs(vhdr->h_vlan_TCI); __vlan_hwaccel_put_tag(skb, vlan_tci); skb_pull_rcsum(skb, VLAN_HLEN); won't be correct. But __pop_vlan_tci() assumes points _before_ mac addr. In vlan_set_encap_proto(), it looks for some magic L2 value after mac addr: rawp = skb->data; if (*(unsigned short *) rawp == 0xFFFF) ... Therefore __pop_vlan_tci() is obviously wrong. A quick fix is avoiding using skb->data in vlan_set_encap_proto(), use 'vhdr+1' is always correct in both cases. Cc: David S. Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* UAPI: (Scripted) Disintegrate include/linuxDavid Howells2012-10-13
| | | | | | | | | Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
* vlan: don't deliver frames for unknown vlans to protocolsFlorian Zumbiehl2012-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | 6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: add helper which can be called to see if device is used by vlanJiri Pirko2012-08-24
| | | | | | | | also, remove unused vlan_info definition from header CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'bug-for-3.4' of ↵Linus Torvalds2012-03-24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/bug.h> cleanup from Paul Gortmaker: "The changes shown here are to unify linux's BUG support under the one <linux/bug.h> file. Due to historical reasons, we have some BUG code in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h, but old code in kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h was including <asm/bug.h> to pseudo link them. This has caused confusion[1] and general yuck/WTF[2] reactions. Here is an example that violates the principle of least surprise: CC lib/string.o lib/string.c: In function 'strlcat': lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON' make[2]: *** [lib/string.o] Error 1 $ $ grep linux/bug.h lib/string.c #include <linux/bug.h> $ We've included <linux/bug.h> for the BUG infrastructure and yet we still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh - very confusing for someone who is new to kernel development. With the above in mind, the goals of this changeset are: 1) find and fix any include/*.h files that were relying on the implicit presence of BUG code. 2) find and fix any C files that were consuming kernel.h and hence relying on implicitly getting some/all BUG code. 3) Move the BUG related code living in kernel.h to <linux/bug.h> 4) remove the asm/bug.h from kernel.h to finally break the chain. During development, the order was more like 3-4, build-test, 1-2. But to ensure that git history for bisect doesn't get needless build failures introduced, the commits have been reorderd to fix the problem areas in advance. [1] https://lkml.org/lkml/2012/1/3/90 [2] https://lkml.org/lkml/2012/1/17/414" Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul and linux-next. * tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: kernel.h: doesn't explicitly use bug.h, so don't include it. bug: consolidate BUILD_BUG_ON with other bug code BUG: headers with BUG/BUG_ON etc. need linux/bug.h bug.h: add include of it to various implicit C users lib: fix implicit users of kernel.h for TAINT_WARN spinlock: macroize assert_spin_locked to avoid bug.h dependency x86: relocate get/set debugreg fcns to include/asm/debugreg.
| * BUG: headers with BUG/BUG_ON etc. need linux/bug.hPaul Gortmaker2012-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any other BUG variant in a static inline (i.e. not in a #define) then that header really should be including <linux/bug.h> and not just expecting it to be implicitly present. We can make this change risk-free, since if the files using these headers didn't have exposure to linux/bug.h already, they would have been causing compile failures/warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | if_vlan: Remove VLAN_ETH_ALEN define and the 1 use of itJoe Perches2012-03-19
|/ | | | | | | Just use ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: introduce functions to do mass addition/deletion of vids by another deviceJiri Pirko2011-12-08
| | | | | | | | Introduce functions handy to copy vlan ids from one driver's list to another. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: introduce vid list with reference countingJiri Pirko2011-12-08
| | | | | | | | | | | | | This allows to keep track of vids needed to be in rx vlan filters of devices even if they are used in bond/team etc. vlan_info as well as vlan_group previously was, is allocated when first vid is added and dealocated whan last vid is deleted. vlan_group definition is moved to private header. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: introduce vlan_vid_[add/del] and use them instead of direct ↵Jiri Pirko2011-12-08
| | | | | | | | | | | [add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: rename vlan_dev_info to vlan_dev_privJiri Pirko2011-12-08
| | | | | | | | As this structure is priv, name it approprietely. Also for pointer to it use name "vlan". Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Move vlan_set_encap_proto() to vlan header filePravin B Shelar2011-12-03
| | | | | | | Open vSwitch needs this function for vlan handling. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
* vlan: allow nested vlan_do_receive()Eric Dumazet2011-10-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2425717b27eb (net: allow vlan traffic to be received under bond) broke ARP processing on vlan on top of bonding. +-------+ eth0 --| bond0 |---bond0.103 eth1 --| | +-------+ 52870.115435: skb_gro_reset_offset <-napi_gro_receive 52870.115435: dev_gro_receive <-napi_gro_receive 52870.115435: napi_skb_finish <-napi_gro_receive 52870.115435: netif_receive_skb <-napi_skb_finish 52870.115435: get_rps_cpu <-netif_receive_skb 52870.115435: __netif_receive_skb <-netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: bond_handle_frame <-__netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: arp_rcv <-__netif_receive_skb 52870.115436: kfree_skb <-arp_rcv Packet is dropped in arp_rcv() because its pkt_type was set to PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103 exists. We really need to change pkt_type only if no more rx_handler is about to be called for the packet. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: move vlan_group_[gs]et_device to public headerJiri Pirko2011-07-21
| | | | | | | there are no users outside vlan code Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: kill vlan_gro_frags and vlan_gro_receiveJiri Pirko2011-07-21
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: kill __vlan_hwaccel_rx and vlan_hwaccel_rxJiri Pirko2011-07-21
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: kill vlan_hwaccel_receive_skbJiri Pirko2011-07-21
| | | | | Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: introduce __vlan_find_dev_deep()Jiri Pirko2011-07-21
| | | | | | | | Since vlan_group_get_device and vlan_group is not going to be accessible from device drivers, introduce function which substitutes it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: finish removing vlan_find_dev from public headerJiri Pirko2011-07-21
| | | | | | | else case remained forgotten. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan, qlcnic: make vlan_find_dev privateDavid Lamparter2011-07-17
| | | | | | | | | | | | | | | | there is only one user of vlan_find_dev outside of the actual vlan code: qlcnic uses it to iterate over some VLANs it knows. let's just make vlan_find_dev private to the VLAN code and have the iteration in qlcnic be a bit more direct. (a few rcu dereferences less too) Signed-off-by: David Lamparter <equinox@diac24.net> Cc: Patrick McHardy <kaber@trash.net> Cc: Amit Kumar Salecha <amit.salecha@qlogic.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Fix the ingress VLAN_FLAG_REORDER_HDR checkJiri Pirko2011-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag but rather in vlan_do_receive. Otherwise the vlan header will not be properly put on the packet in the case of vlan header accelleration. As we remove the check from vlan_check_reorder_header rename it vlan_reorder_header to keep the naming clean. Fix up the skb->pkt_type early so we don't look at the packet after adding the vlan tag, which guarantees we don't goof and look at the wrong field. Use a simple if statement instead of a complicated switch statement to decided that we need to increment rx_stats for a multicast packet. Hopefully at somepoint we will just declare the case where VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove the code. Until then this keeps it working correctly. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: move is_vlan_dev into public header file (v2)Neil Horman2011-05-25
| | | | | | | | | Migrate is_vlan_dev() to if_vlan.h so that core networkig can use it Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: davem@davemloft.net CC: bhutchings@solarflare.com Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: remove one synchronize_net() callEric Dumazet2011-05-09
| | | | | | | | | | | | | | | | | | At VLAN dismantle phase, unregister_vlan_dev() makes one synchronize_net() call after vlan_group_set_device(grp, vlan_id, NULL). This call can be safely removed because we are calling unregister_netdevice_queue() to queue device for deletion, and this process needs at least one rcu grace period to complete. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ben Greear <greearb@candelatech.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Jesse Gross <jesse@nicira.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Missing 'inline' in vlan-disabled vlan_untag()David S. Miller2011-04-12
| | | | | Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: vlan: make non-hw-accel rx path similar to hw-accelJiri Pirko2011-04-12
| | | | | | | | | | | | | | | | | | | Now there are 2 paths for rx vlan frames. When rx-vlan-hw-accel is enabled, skb is untagged by NIC, vlan_tci is set and the skb gets into vlan code in __netif_receive_skb - vlan_hwaccel_do_receive. For non-rx-vlan-hw-accel however, tagged skb goes thru whole __netif_receive_skb, it's untagged in ptype_base hander and reinjected This incosistency is fixed by this patch. Vlan untagging happens early in __netif_receive_skb so the rest of code (ptype_all handlers, rx_handlers) see the skb like it was untagged by hw. Signed-off-by: Jiri Pirko <jpirko@redhat.com> v1->v2: remove "inline" from vlan_core.c functions Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Add function to retrieve EtherType from vlan packets.Hao Zheng2010-11-12
| | | | | | | | | | | Depending on how a packet is vlan tagged (i.e. hardware accelerated or not), the encapsulated protocol is stored in different locations. This provides a consistent method of accessing that protocol, which is needed by drivers, security checks, etc. Signed-off-by: Hao Zheng <hzheng@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Calling vlan_hwaccel_do_receive() is always valid.Jesse Gross2010-10-21
| | | | | | | | | | | It is now acceptable to receive vlan tagged packets at any time, even if CONFIG_VLAN_8021Q is not set. This means that calling vlan_hwaccel_do_receive() should not result in BUG() but rather just behave as if there were no vlan devices configured. Reported-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Centralize handling of hardware acceleration.Jesse Gross2010-10-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently each driver that is capable of vlan hardware acceleration must be aware of the vlan groups that are configured and then pass the stripped tag to a specialized receive function. This is different from other types of hardware offload in that it places a significant amount of knowledge in the driver itself rather keeping it in the networking core. This makes vlan offloading function more similarly to other forms of offloading (such as checksum offloading or TSO) by doing the following: * On receive, stripped vlans are passed directly to the network core, without attempting to check for vlan groups or reconstructing the header if no group * vlans are made less special by folding the logic into the main receive routines * On transmit, the device layer will add the vlan header in software if the hardware doesn't support it, instead of spreading that logic out in upper layers, such as bonding. There are a number of advantages to this: * Fixes all bugs with drivers incorrectly dropping vlan headers at once. * Avoids having to disable VLAN acceleration when in promiscuous mode (good for bridging since it always puts devices in promiscuous mode). * Keeps VLAN tag separate until given to ultimate consumer, which avoids needing to do header reconstruction as in tg3 unless absolutely necessary. * Consolidates common code in core networking. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Avoid hash table lookup to find group.Jesse Gross2010-10-21
| | | | | | | | | | A struct net_device always maps to zero or one vlan groups and we always know the device when we are looking up a group. We currently do a hash table lookup on the device to find the group but it is much simpler to just store a pointer. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross2010-10-21
| | | | | | | | | | VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: 802.1q: make vlan_hwaccel_do_receive() return voidChangli Gao2010-08-23
| | | | | | | vlan_hwaccel_do_receive() always returns 0, so make it return void. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: support "loose binding" to the underlying network devicePatrick McHardy2009-11-26
| | | | | | | | | | | | Currently the UP/DOWN state of VLANs is synchronized to the state of the underlying device, meaning all VLANs are set down once the underlying device is set down. This causes all routes to the VLAN devices to vanish. Add a flag to specify a "loose binding" mode, in which only the operstate is transfered, but the VLAN device state is independant. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: Change all receive functions to return GRO result codesBen Hutchings2009-10-30
| | | | | | | | | | | | This will allow drivers to adjust their receive path dynamically based on whether GRO is being applied successfully. Currently all in-tree callers ignore the return values of these functions and do not need to be changed. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Optimize multiple unregistrationEric Dumazet2009-10-28
| | | | | | | Use unregister_netdevice_many() to speedup master device unregister. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: allow null VLAN ID to be usedEric Dumazet2009-10-27
| | | | | | | | | | | | | | | | | | | | | | | | | We currently use a 16 bit field (vlan_tci) to store VLAN ID/PRIO on a skb. Null value is used as a special value, meaning vlan tagging not enabled. This forbids use of null vlan ID. As pointed by David, some drivers use the 3 high order bits (PRIO) As VLAN ID is 12 bits, we can use the remaining bit (CFI) as a flag, and allow null VLAN ID. In case future code really wants to use VLAN_CFI_MASK, we'll have to use a bit outside of vlan_tci. #define VLAN_PRIO_MASK 0xe000 /* Priority Code Point */ #define VLAN_PRIO_SHIFT 13 #define VLAN_CFI_MASK 0x1000 /* Canonical Format Indicator */ #define VLAN_TAG_PRESENT VLAN_CFI_MASK #define VLAN_VID_MASK 0x0fff /* VLAN Identifier */ Reported-by: Gertjan Hofman <gertjan_hofman@yahoo.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gro: New frags interface to avoid copying shinfoHerbert Xu2009-04-16
| | | | | | | | | | | It turns out that copying a 16-byte area at ~800k times a second can be really expensive :) This patch redesigns the frags GRO interface to avoid copying that area twice. The two disciples of the frags interface have been converted. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Update skb->mac_header in __vlan_put_tag().Jarek Poplawski2009-02-19
| | | | | | | | | After moving mac addresses in __vlan_put_tag() skb->mac_header needs to be updated. Reported-by: Karl Hiramoto <karl@hiramoto.org> Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* vlan: Add GRO interfacesHerbert Xu2009-01-06
| | | | | | | | | | | | | | | | This patch adds GRO interfaces for hardware-assisted VLAN reception. With this in place we're now at parity with LRO as far as the interface is concerned. That is, you can now take any LRO driver and convert it over to GRO. As the CB memory clashes with GRO's use of CB, I've removed it entirely by storing dev in skb->dev. This is OK because VLAN gets called first thing in netif_receive_skb and skb->dev is not used in between us calling netif_rx and netif_receive_skb getting called. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: fix packet socket delivery in rx irq handlerPatrick McHardy2008-11-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes to deliver hardware accelerated VLAN packets to packet sockets (commit bc1d0411) caused a warning for non-NAPI drivers. The __vlan_hwaccel_rx() function is called directly from the drivers RX function, for non-NAPI drivers that means its still in RX IRQ context: [ 27.779463] ------------[ cut here ]------------ [ 27.779509] WARNING: at kernel/softirq.c:136 local_bh_enable+0x37/0x81() ... [ 27.782520] [<c0264755>] netif_nit_deliver+0x5b/0x75 [ 27.782590] [<c02bba83>] __vlan_hwaccel_rx+0x79/0x162 [ 27.782664] [<f8851c1d>] atl1_intr+0x9a9/0xa7c [atl1] [ 27.782738] [<c0155b17>] handle_IRQ_event+0x23/0x51 [ 27.782808] [<c015692e>] handle_edge_irq+0xc2/0x102 [ 27.782878] [<c0105fd5>] do_IRQ+0x4d/0x64 Split hardware accelerated VLAN reception into two parts to fix this: - __vlan_hwaccel_rx just stores the VLAN TCI and performs the VLAN device lookup, then calls netif_receive_skb()/netif_rx() - vlan_hwaccel_do_receive(), which is invoked by netif_receive_skb() in softirq context, performs the real reception and delivery to packet sockets. Reported-and-tested-by: Ramon Casellas <ramon.casellas@cttc.es> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 14:30:10 -0500