aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux/fb.h
Commit message (Collapse)AuthorAge
...
* fbdev: add drawing functions for framebuffers in system RAMAntonino A. Daplas2007-05-08
| | | | | | | | | | | | | | | | The generic drawing functions (cfbimgblt, cfbcopyarea, cfbfillrect) assume that the framebuffer is in IO memory. However, we have 3 drivers (hecubafb, arcfb, and vfb) where the framebuffer is allocated from system RAM (via vmalloc). Using _raw_read/write and family for these drivers (as used in the cfb* functions) is illegal, especially in other platforms. Create 3 new drawing functions, based almost entirely from the original except that the framebuffer memory is assumed to be in system RAM. These are named as sysimgblt, syscopyarea, and sysfillrect. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fb: fsync() method for deferred I/O flush.Paul Mundt2007-05-08
| | | | | | | | | | | | | | | There are cases when we do not want to wait on the delay for automatically updating the "real" framebuffer, this implements a simple ->fsync() hook for explicitly flushing the deferred I/O work. The ->page_mkwrite() handler will rearm the work queue normally. (akpm: nuke unneeded ifdefs, forward-delcare struct dentry) Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Jaya Kumar <jayakumar.lkml@gmail.com> Acked-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* fbdev: mm: Deferred IO supportJaya Kumar2007-05-08
| | | | | | | | | | | | | | | | | This implements deferred IO support in fbdev. Deferred IO is a way to delay and repurpose IO. This implementation is done using mm's page_mkwrite and page_mkclean hooks in order to detect, delay and then rewrite IO. This functionality is used by hecubafb. [adaplas] This is useful for graphics hardware with no directly addressable/mappable framebuffer. Implementing this will allow the "framebuffer" to be accesible from user space via mmap(). Signed-off-by: Jaya Kumar <jayakumar.lkml@gmail.com> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* backlight: Rework backlight/fb interaction simplifying, lotsRichard Purdie2007-02-20
| | | | | | | | | | | | | | | | | fb_info->bl_mutex is badly thought out and the backlight class doesn't need it if the framebuffer/backlight register/unregister order is consistent, particularly after the backlight locking fixes. Fix the drivers to use the order: backlight_device_register() register_framebuffer() unregister_framebuffer() backlight_device_unregister() and turn bl_mutex into a lock for the bl_curve data only. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* backlight/fbcon: Add FB_EVENT_CONBLANKRichard Purdie2007-02-20
| | | | | | | | | | The backlight class wants notification whenever the console is blanked but doesn't get this when hardware blanking fails and software blanking is used. Changing FB_EVENT_BLANK to report both would be a behaviour change which could confuse the console layer so add a new event for software blanking and have the backlight class listen for both. Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* [PATCH] fbdev modedb: make more pointer parameters constGeert Uytterhoeven2007-02-12
| | | | | | | | | | | fbdev modedb: make more input and output pointer parameters const Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: James Simmons <jsimmons@infradead.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fbdev driver for S3 Trio/VirgeOndrej Zajicek2007-02-12
| | | | | | | | | | | | | | | | | | | | | | | | | Add a driver for S3 Trio / S3 Virge. Driver is tested with most versions of S3 Trio and with S3 Virge/DX, on i386. (akpm: We kind-of have support for this hardware already, but... virgefb.c - amiga/zorro specific, - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) - recent Adrian Bunk's patch removes this driver S3triofb.c - ppc/openfirmware specific - minimal functionality - broken (according to Kconfig), - uses obsolete/nonexistent interface (struct display_switch) ) Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fbdev: remove references to non-existent fbmon_valid_timings()Geert Uytterhoeven2006-12-13
| | | | | | | | | Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcmap.c: mark structs const or __read_mostlyHelge Deller2006-12-08
| | | | | | | | | | | | | | | | - Mark the default colormaps read-only, as nobody should be allowed to modify them - Additionally mark color values as __read_mostly since they will only be modified (very seldom) by fb_invert_cmaps() - Add named C99-initializers in fb_cmap structs and use the ARRAY_SIZE() macro Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Driver core: convert fb code to use struct deviceGreg Kroah-Hartman2006-12-01
| | | | | | | | | Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fbdev: Honor the return value of device_create_fileAntonino A. Daplas2006-10-03
| | | | | | | | | Check the return value of device_create_file(). If return is 'fail', remove attributes by calling device_remove_file(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add generic ddc read functionalityDennis Munsie2006-10-03
| | | | | | | | | | | | | | | | | | Adds functionality to read the EDID information over the DDC bus in a generic way. This code is based on the DDC implementation in the radeon driver. [adaplas] - separate from fbmon.c and place in new file fb_ddc.c - remove dependency to CONFIG_I2C and CONFIG_I2C_ALGOBIT, otherwise, feature will not compile if i2c support is compiled as a module - feature is selectable only by drivers needing it. It must have a 'select FB_DDC if xxx' in Kconfig - change printk's to dev_*, the i2c people prefers it Signed-off-by: Dennis Munsie <dmunsie@cecropia.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: include backlight.h only when __KERNEL__ is definedMichal Januszewski2006-08-14
| | | | | | | | | | | linux/backlight.h pulls in header files (eg. ioport.h) that break compilation of userspace programs. To solve the problem, only include backlight.h in fb.h if compiling kernel stuff. Signed-off-by: Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fbdev: statically link the framebuffer notification functionsAntonino A. Daplas2006-07-31
| | | | | | | | | | | | | | | The backlight and lcd subsystems can be notified by the framebuffer layer of blanking events. However, these subsystems, as a whole, can function independently from the framebuffer layer. But in order to enable to the lcd and backlight subsystems, the framebuffer has to be compiled also, effectively sucking in a huge amount of unneeded code. To prevent dependency problems, separate out the framebuffer notification mechanism from the framebuffer layer and permanently link it to the kernel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vt: Remove VT-specific declarations and definitions from tty.hJon Smirl2006-07-10
| | | | | | | | | | | | | MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* typo fixes: mecanism -> mechanismAdrian Bunk2006-06-30
| | | | Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeGreg Kroah-Hartman2006-06-26
| | | | | | Also fixes up all files that #include it. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] VT binding: Update fbcon to support bindingAntonino A. Daplas2006-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The control for binding/unbinding is moved from fbcon to the console layer. Thus the fbcon sysfs attributes, attach and detach, are also gone. 1. Add a notifier event that tells fbcon if a framebuffer driver has been unregistered. If no registered driver remains, fbcon will unregister itself from the console layer. 2. Replaced calls to give_up_console() with unregister_con_driver(). 3. Still use take_over_console() instead of register_con_driver() to maintain compatibility 4. Respect the parameter first_fb_vc and last_fb_vc instead of using 0 and MAX_NR_CONSOLES - 1. These parameters are settable by the user. 5. When fbcon is completely unbound from the console layer, fbcon will also release (iow, decrement module reference counts to zero) all fbdev drivers. In other words, a bind or unbind request from the console layer will propagate down to the framebuffer drivers. 6. If fbcon is not bound to the console, it will ignore all notifier events (except driver registration and unregistration) and all sysfs requests. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Detaching fbcon: sdd sysfs class device entry for fbconAntonino A. Daplas2006-06-26
| | | | | | | | | | | | | | | | In order for this feature to work, an interface will be needed. The most appropriate is sysfs. However, the framebuffer console has no sysfs entry yet. This will create a sysfs class device entry for fbcon under /sys/class/graphics. Add a class_device entry 'fbcon' under class 'graphics'. Console-specific attributes which where previously under class/graphics/fb[x] are moved to class/graphics/fbcon. These attributes, 'con_rotate' and 'con_rotate_all', are also renamed to 'rotate' and 'rotate_all' respectively. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Rewritten backlight infrastructure for portable Apple computersMichael Hanselmann2006-06-25
| | | | | | | | | | | | | | | | This patch contains a total rewrite of the backlight infrastructure for portable Apple computers. Backward compatibility is retained. A sysfs interface allows userland to control the brightness with more steps than before. Userland is allowed to upload a brightness curve for different monitors, similar to Mac OS X. [akpm@osdl.org: add needed exports] Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Fix big-endian bogosity in slow_imageblit()Antonino A. Daplas2006-03-31
| | | | | | | | | | | | | | | | | | | | The monochrome->color expansion routine that handles bitmaps which have (widths % 8) != 0 (slow_imageblit) produces corrupt characters in big-endian. This is caused by a bogus bit test in slow_imageblit(). Fix. This patch may deserve to go to the stable tree. The code has already been well tested in little-endian machines. It's only in big-endian where there is uncertainty and Herbert confirmed that this is the correct way to go. It should not introduce regressions. Signed-off-by: Antonino Daplas <adaplas@pol.net> Acked-by: Herbert Poetzl <herbert@13thfloor.at> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Typo fixesAlexey Dobriyan2006-03-28
| | | | | | | | Fix a lot of typos. Eyeballed by jmc@ in OpenBSD. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Sanitize ->fb_mmap prototypeChristoph Hellwig2006-01-14
| | | | | | | | | | | No need for a file argument. If we'd really need it it's in vma->vm_file already. gbefb and sgivwfb used to set vma->vm_file to the file argument, but the kernel alrady did that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig2006-01-14
| | | | | | | | | | | The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Fix incorrect unaligned access in little-endian machinesAntonino A. Daplas2005-12-13
| | | | | | | | | | | | | | The drawing function cfbfillrect does not work correctly when access is not unsigned-long aligned. It manifests as extra lines of pixels that are not complete drawn. Reversing the shift operator solves the problem, so I would presume that this bug would manifest only on little endian machines. The function cfbcopyarea may also have this bug. Aligned access should present no problems. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: fix switch to KD_TEXT, enhanced versionKnut Petersen2005-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Every framebuffer driver relies on the assumption that the set_par() function of the driver is called before drawing functions and other functions dependent on the hardware state are executed. Whenever you switch from X to a framebuffer console for the very first time, there is a chance that a broken X system has _not_ set the mode to KD_GRAPHICS, thus the vt and framebuffer code executes a screen redraw and several other functions before a set_par() is executed. This is believed to be not a bug of linux but a bug of X/xdm. At least some X releases used by SuSE and Debian show this behaviour. There was a 2nd case, but that has been fixed by Antonino Daplas on 10-dec-2005. This patch allows drivers to set a flag to inform fbcon_switch() that they prefer a set_par() call on every console switch, working around the problems caused by the broken X releases. The flag will be used by the next release of cyblafb and might help other drivers that assume a hardware state different to the one used by X. As the default behaviour does not change, this patch should be acceptable to everybody. Signed-off-by: Knut Petersen <Knut_Petersen@t-online.de> Acked-by: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Add ability to save/restore graphics stateAntonino A. Daplas2005-12-13
| | | | | | | | | | | | Add hooks to save and restore the graphics state. These hooks are called in fbcon_blank() when entering/leaving KD_GRAPHICS mode. This is needed by savagefb at least so it can cooperate with savage_dri and by cyblafb. State save/restoration can be full or partial. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Console Rotation - Add ability to control rotation via sysfsAntonino A. Daplas2005-11-09
| | | | | | | | | | | | | | | | | | | | | | Add ability to set rotation via sysfs. The attributes are located in /sys/class/graphics/fb[n] and accepts 0 - unrotated; 1 - clockwise; 2 - upside down; 3 - counterclockwise. The attributes are: con_rotate (r/w) - set rotation of the active console con_rotate_all (w) - set rotation of all consoles rotate (r/w) - set rotation of the framebuffer, if supported. Currently, none of the drivers support this. This is probably temporary, since con_rotate and con_rotate_all are console-specific and has no business being under the fb device. However, until the console layer acquires it's own sysfs class, these attributes will temporarily reside here. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Console Rotation - Add support to rotate the logoAntonino A. Daplas2005-11-09
| | | | | | | | | | Add support for rotating and positioning of the logo. Rotation and position depends on 'int rotate' parameter added to fb_prepare_logo() and fb_show_logo(). Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Console Rotation - Prepare fbcon for console rotationAntonino A. Daplas2005-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch series implements generic code to rotate the console at 90, 180, and 270 degrees. The implementation is completely done in the framebuffer console level, thus no changes to the framebuffer layer or to the drivers are needed. Console rotation is required by some Sharp-based devices where the natural orientation of the display is not at 0 degrees. Also, users that have displays that can pivot will benefit by having a console in portrait mode if they so desire. The choice to implement the code in the console layer rather than in the framebuffer layer is due to the following reasons: - it's fast - it does not require driver changes - it can coexist with devices that can rotate the display at the hardware level - it complements graphics applications that can do display rotation The changes to core fbcon are minimal-- recognition of the console rotation angle so it can swap directions, origins and axes (xres vs yres, xpanstep vs ypanstep, xoffset vs yoffset, etc) and storage of the rotation angle per display. The bulk of the code that does the actual drawing to the screen are placed in separate files. Each angle of rotation has separate methods (bmove, clear, putcs, cursor, update_start which is derived from update_var, and clear_margins). To mimimize processing time, the fontdata are pre-rotated at each console switch (only if the font or the angle has changed). The option can be compiled out (CONFIG_FRAMEBUFFER_CONSOLE_ROTATION = n) if rotation is not needed. Choosing the rotation angle can be done in several ways: 1. boot option fbcon=rotate:n, where n = 0 - normal n = 1 - 90 degrees (clockwise) n = 2 - 180 degrees (upside down) n = 3 - 270 degrees (counterclockwise) 2. echo n > /sys/class/graphics/fb[num]/con_rotate where n is the same as described above. It sets the angle of rotation of the current console 3 echo n > /sys/class/graphics/fb[num]/con_rotate_all where n is the same as described above. Globally sets the angle of rotation. GOTCHAS: The option, especially at angles of 90 and 270 degrees, will exercise the least used code of drivers. Namely, at these angles, panning is done in the x-axis, so it can reveal bugs in the driver if xpanstep is set incorrectly. A workaround is to set xpanstep = 0. Secondly, at these angles, the framebuffer memory access can be unaligned if (fontheight * bpp) % 32 ~= 0 which can reveal bugs in the drivers imageblit, fillrect and copyarea functions. (I think cfbfillrect may have this buglet). A workaround is to use a standard 8x16 font. Speed: The scrolling speed difference between 0 and 180 degrees is minimal, somewhere areound 1-2%. At 90 or 270 degress, speed drops down to a vicinity of 30-40%. This is understandable because the blit direction is across the framebuffer "direction." Scrolling will be helped at these angles if xpanstep is not equal to zero, use of 8x16 fonts, and setting xres_virtual >= xres * 2. Note: The code is tested on little-endian only, so I don't know if it will work in big-endian. Please let me know, it will take only less than a minute of your time. This patch prepares fbcon for console rotation and contains the following changes: - add rotate field in struct fbcon_ops to keep fbcon's current rotation angle - add con_rotate field in struct display to store per-display rotation angle - create a private copy of the current var to fbcon. This will prevent fbcon from directly manipulating info->var, especially the fields xoffset, yoffset and vmode. - add ability to swap pertinent axes (xres, yres; xpanstep, ypanstep; etc) depending on the rotation angle - change global update_var() (function that sets the screen start address) as an fbcon method update_start. This is required because the axes, start offset, and/or direction can be reversed depending on the rotation angle. - add fbcon method rotate_font() which will rotate each character bitmap to the correct angle of rotation. - add fbcon boot option 'rotate' to select the angle of rotation at bootime. Currently does nothing until all patches are applied. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add helper to get an appropriate initial modeAntonino A. Daplas2005-11-07
| | | | | | | | | | | | | | | | Add new helper, fb_find_best_display(), which will search the modelist for the best mode for the attached display. This requires an EDID block that is converted to struct fb_monspecs and a private modelist. The search will be done in this manner: - if 1st detailed timing is preferred, use that - else if dimensions of the display are known, use that to estimate xres and - else if modelist has detailed timings, use the first detailed timing - else, use the very first entry from the modelist Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: fix the fb_find_nearest_mode() functionMichal Januszewski2005-11-07
| | | | | | | | | | | | | | | | | | Currently the fb_find_nearest_mode() function finds a mode with screen resolution closest to that described by the 'var' argument and with some arbitrary refresh rate (eg. in the following sequence of refresh rates: 70 60 53 85 75, 53 is selected). This patch fixes the function so that it looks for the closest mode as far as both resolution and refresh rate are concerned. The function's first argument is changed to fb_videomode so that the refresh rate can be specified by the caller, as fb_var_screeninfo doesn't have any fields that could directly hold this data. Signed-off-by: Michal Januszewski <spock@gentoo.org> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbconAntonino A. Daplas2005-11-07
| | | | | | | | | | | | | | | | | | | | According to Jon Smirl, filling in the field fb_cursor with soft_cursor for drivers that do not support hardware cursors is redundant. The soft_cursor function is usable by all drivers because it is just a wrapper around fb_imageblit. And because soft_cursor is an fbcon-specific hook, the file is moved to the console directory. Thus, drivers that do not support hardware cursors can leave the fb_cursor field blank. For drivers that do, they can fill up this field with their own version. The end result is a smaller code size. And if the framebuffer console is not loaded, module/kernel size is also reduced because the soft_cursor module will also not be loaded. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: constify font dataJan Beulich2005-09-13
| | | | | | | | | | | | const-ify the font control structures and data, to make somewhat better guarantees that these are not modified anywhere in the kernel. Specifically for a kernel debugger to share this information from the normal kernel code, such a guarantee seems rather desirable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon: Break up bit_putcs into its component functionsAntonino A. Daplas2005-09-09
| | | | | | | | | | | | The function bit_putcs() in drivers/video/console/bitblit.c is becoming large. Break it up into its component functions (bit_putcs_unaligned and bit_putcs_aligned). Incorporated fb_pad_aligned_buffer() optimization by Roman Zippel. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add VESA Coordinated Video Timings (CVT) supportAntonino A. Daplas2005-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Coordinated Video Timings (CVT) is the latest standard approved by VESA concerning video timings generation. It addresses the limitation of GTF which is designed mainly for CRT displays. CRT's have a high blanking requirement (as much as 25% of the horizontal frame length) which artificially increases the pixelclock. Digital displays, on the other hand, needs to conserve the pixelclock as much as possible. The GTF also does not take into account the different aspect ratios in its calculation. The new function added is fb_find_mode_cvt(). It is called by fb_find_mode() if it recognizes a mode option string formatted for CVT. The format is: <xres>x<yres>[M][R][-<bpp>][<at-sign><refresh>][i][m] The 'M' tells the function to calculate using CVT. On it's own, it will compute a timing for CRT displays at 60Hz. If the 'R' is specified, 'reduced blanking' computation will be used, best for flatpanels. The 'i' and the 'm' is for 'interlaced mode' and 'with margins' respectively. To determine if CVT was used, check for dmesg for something like this: CVT Mode - <pix>M<n>[-R], ie: .480M3-R (800x600 reduced blanking) where: pix - product of xres and yres, in MB M - is a CVT mode n - the aspect ratio (3 - 4:3; 4 - 5:4; 9 - 16:9, 15:9; A - 16:10) -R - reduced blanking Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sisfb updateThomas Winischhofer2005-09-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This lifts sisfb from version 1.7.17 to version 1.8.9. Changes include: - Added support for XGI V3XT, V5, V8, Z7 chipsets, including POSTing of all of these chipsets. - Added support for latest SiS chipsets (761). - Added support for SiS76x memory "hybrid" mode. - Added support for new LCD resolutions (eg 1280x854, 856x480). - Fixed support for 320x240 STN panels (for embedded devices). - Fixed many HDTV modes (525p, 750p, 1080i). - Fixed PCI config register reading/writing to use proper kernel functions for this purpose. - Fixed PCI ROM handling to use the kernel's proper functions. - Removed lots of "typedef"s. - Removed lots of code which was for X.org/XFree86 only. - Fixed coding style in many places. - Removed lots of 2.4 cruft. - Reduced stack size by unifying two previously separate structs into one. - Added new hooks for memory allocation (for DRM). Now the driver can truly handle multiple cards, including memory management. - Fixed numerous minor bugs. Signed-off-by: Thomas Winischhofer <thomas@winischhofer.net> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Fix greater than 1 bit monochrome color handlingAntonino A. Daplas2005-09-09
| | | | | | | | | | | Currently, fbcon assumes that the visual FB_VISUAL_MONO* is always 1 bit. According to Geert, there are old hardware where it's possible to have monochrome at 8-bit, but has only 2 colors, black - 0x00 and white - 0xff. Fix color handlers (fb_get_color_depth, and get_color) for this special case. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Resurrect hooks to get EDID from firmwareAntonino A. Daplas2005-09-09
| | | | | | | | | | | | | For the i386, code is already present in video.S that gets the EDID from the video BIOS. Make this visible so drivers can also use this data as fallback when i2c does not work. To ensure that the EDID block is returned for the primary graphics adapter only, by check if the IORESOURCE_ROM_SHADOW flag is set. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Add fbset -a supportAntonino A. Daplas2005-09-09
| | | | | | | | | Add capability to fbdev to listen to the FB_ACTIVATE_ALL flag. If set, it notifies fbcon that all consoles must be set to the current var. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: stack reductionJames Simmons2005-06-21
| | | | | | | | | Shrink the stack when calling the drawing alignment functions. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: iomove removalJames Simmons2005-06-21
| | | | | | | | | | | | | Since no one is using the inbuf, outbuf of struct fb_pixmap I removed their use in the framebuffer console. The idea is instead move the pixmap functionality below the accelerated functions intead of on top as the way it is now. If there is no objection please apply. This is against Linus latestr GIT tree. Thank you. Signed-off-by: James Simmons <jsimmons@www.infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbdev: Batch cmap changes at driver levelBenjamin Herrenschmidt2005-05-01
| | | | | | | | | | | This patch adds to the fbdev interface a set_cmap callback that allow the driver to "batch" palette changes. This is useful for drivers like radeonfb which might require lenghtly workarounds on palette accesses, thus allowing to factor out those workarounds efficiently. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-23 19:25:34 -0500