aboutsummaryrefslogtreecommitdiffstats
path: root/include/asm-powerpc
Commit message (Collapse)AuthorAge
* Fix Maple PATA IRQ assignment.David Woodhouse2007-01-26
| | | | | | | | | | | | | | | | | | | | | | On the Maple board, the AMD8111 IDE is in legacy mode... except that it appears on IRQ 20 instead of IRQ 15. For drivers/ide this was handled by the architecture's "pci_get_legacy_ide_irq()" function, but in libata we just hard-code the numbers 14 and 15. This patch provides asm-powerpc/libata-portmap.h which maps the IRQ as appropriate, having added a pci_dev argument to the ATA_{PRIM,SECOND}ARY_IRQ macros. There's probably a better way to do this -- especially if we observe that the _only_ case in which this seemingly-generic "pci_get_legacy_ide_irq()" function returns anything other than 14 and 15 for primary and secondary respectively is the case of the AMD8111 on the Maple board -- couldn't we handle that with a special case in the pata_amd driver, or perhaps with a PCI quirk for Maple to switch it into native mode during early boot and assign resources properly? Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [POWERPC] atomic_dec_if_positive sign extension fixRobert Jennings2007-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | On 64-bit machines, if an atomic counter is explicitly set to a negative value, the atomic_dec_if_positive function will decrement and store the next smallest value in the atomic counter, contrary to its intended operation. The comparison to determine if the decrement will make the result negative was done by the "addic." instruction, which operates on a 64-bit value, namely the zero-extended word loaded from the atomic variable. This patch uses an explicit word compare (cmpwi) and changes the addic. to an addi (also changing "=&r" to "=&b" so that r0 isn't used, and addi doesn't become li). This also fixes a bug for both 32-bit and 64-bit in that previously 0x80000000 was considered positive, since the result after decrementing is positive. Now it is considered negative. Also, I clarify the return value in the comments just to make it clear that the value returned is always the decremented value, even if that value is not stored back to the atomic counter. Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] FD_ZERO build fixAndrew Morton2007-01-11
| | | | | | | | | | | | | | | | | | unionfs managed to hit this on s390. Some architectures use __ptr_t in their FD_ZERO implementation. We don't have a __ptr_t. Switch them over to plain old void*. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [POWERPC] Fix bugs in the hypervisor call stats codeAnton Blanchard2007-01-09
| | | | | | | | | | | | | | | | There were a few issues with the HCALL_STATS code: - PURR cpu feature checks were backwards - We iterated one entry off the end of the hcall_stats array - Remove dead update_hcall_stats() function prototype I noticed one thing while debugging, and that is we call H_ENTER (to set up the MMU hashtable in early init) before we have done the cpu fixups. This means we will execute the PURR SPR reads even on a CPU that isnt capable of it. I wonder if we can move the CPU feature fixups earlier. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 52xx: Don't use device_initcall to probe of_platform_busSylvain Munaut2007-01-09
| | | | | | | | | | | | | | | Using device_initcall makes it happen for every platform that compiles this file in. This is really bad, for obvious reasons. Instead, we use the .init field of the machine description. If the platform needs the hook to do something specific it can provides its own function and call mpc52xx_declare_of_platform_devices from there. If not, the mpc52xx_declare_of_platform_devices function can directly be used as the init hook. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix manual assembly WARN_ON() in enter_rtas().David Woodhouse2007-01-09
| | | | | | | | | | | | | | | | | | When we switched over to the generic BUG mechanism we forgot to change the assembly code which open-codes a WARN_ON() in enter_rtas(), so the bug table got corrupted. This patch provides an EMIT_BUG_ENTRY macro for use in assembly code, and uses it in entry_64.S. Tested with CONFIG_DEBUG_BUGVERBOSE on ppc64 but not without -- I tried to turn it off but it wouldn't go away; I suspect Aunt Tillie probably needed it. This version gets __FILE__ and __LINE__ right in the assembly version -- rather than saying include/asm-powerpc/bug.h line 21 every time which is a little suboptimal. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] cell: add forward struct declarations to spu.hArnd Bergmann2006-12-19
| | | | | | | Needed to be able to include spu.h independant from other headers. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [PATCH] Optimize D-cache alias handling on forkRalf Baechle2006-12-13
| | | | | | | | | | | Virtually index, physically tagged cache architectures can get away without cache flushing when forking. This patch adds a new cache flushing function flush_cache_dup_mm(struct mm_struct *) which for the moment I've implemented to do the same thing on all architectures except on MIPS where it's a no-op. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] PM: Fix SMP races in the freezerRafael J. Wysocki2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, to tell a task that it should go to the refrigerator, we set the PF_FREEZE flag for it and send a fake signal to it. Unfortunately there are two SMP-related problems with this approach. First, a task running on another CPU may be updating its flags while the freezer attempts to set PF_FREEZE for it and this may leave the task's flags in an inconsistent state. Second, there is a potential race between freeze_process() and refrigerator() in which freeze_process() running on one CPU is reading a task's PF_FREEZE flag while refrigerator() running on another CPU has just set PF_FROZEN for the same task and attempts to reset PF_FREEZE for it. If the refrigerator wins the race, freeze_process() will state that PF_FREEZE hasn't been set for the task and will set it unnecessarily, so the task will go to the refrigerator once again after it's been thawed. To solve first of these problems we need to stop using PF_FREEZE to tell tasks that they should go to the refrigerator. Instead, we can introduce a special TIF_*** flag and use it for this purpose, since it is allowed to change the other tasks' TIF_*** flags and there are special calls for it. To avoid the freeze_process()-refrigerator() race we can make freeze_process() to always check the task's PF_FROZEN flag after it's read its "freeze" flag. We should also make sure that refrigerator() will always reset the task's "freeze" flag after it's set PF_FROZEN for it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Howells <dhowells@redhat.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds2006-12-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits) [POWERPC] Generic BUG for powerpc [PPC] Fix compile failure do to introduction of PHY_POLL [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set [POWERPC] Remove old dcr.S [POWERPC] Fix SPU coredump code for max_fdset removal [POWERPC] Fix irq routing on some 32-bit PowerMacs [POWERPC] ps3: Add vuart support [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes [POWERPC] dont allow pSeries_probe to succeed without initialising MMU [POWERPC] micro optimise pSeries_probe [POWERPC] Add SPURR SPR to sysfs [POWERPC] Add DSCR SPR to sysfs [POWERPC] Fix 440SPe CPU table entry [POWERPC] Add support for FP emulation for the e300c2 core [POWERPC] of_device_register: propagate device_create_file return code [POWERPC] Fix mmap of PCI resource with hack for X [POWERPC] iSeries: head_64.o needs to depend on lparmap.s [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group [POWERPC] Remove QE header files from lite5200.c [POWERPC] of_platform_make_bus_id(): make `magic' int ...
| * [POWERPC] Generic BUG for powerpcJeremy Fitzhardinge2006-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This makes powerpc use the generic BUG machinery. The biggest reports the function name, since it is redundant with kallsyms, and not needed in general. There is an overall reduction of code, since module_32/64 duplicated several functions. Unfortunately there's no way to tell gcc that BUG won't return, so the BUG macro includes a goto loop. This will generate a real jmp instruction, which is never used. [akpm@osdl.org: build fix] [paulus@samba.org: remove infinite loop in BUG_ON] Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Andi Kleen <ak@muc.de> Cc: Hugh Dickens <hugh@veritas.com> Cc: Michael Ellerman <michael@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * Merge branch 'for_paulus' of ↵Paul Mackerras2006-12-11
| |\ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc
| | * Merge branch '85xx' into for_paulusKumar Gala2006-12-11
| | |\
| | | * [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is setKumar Gala2006-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 85xx we don't build in dcr support because the core doesn't implement the instructions. This caused problems when building an 85xx kernel. Additionally made it so we only build __mtdcr/__mfdcr if we are CONFIG_PPC_DCR_NATIVE. The 85xx build issue wasPointed out by Dai Haruki. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | * | [POWERPC] Add support for FP emulation for the e300c2 coreKim Phillips2006-12-08
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The e300c2 has no FPU. Its MSR[FP] is grounded to zero. If an attempt is made to execute a floating point instruction (including floating-point load, store, or move instructions), the e300c2 takes a floating-point unavailable interrupt. This patch adds support for FP emulation on the e300c2 by declaring a new CPU_FTR_FP_TAKES_FPUNAVAIL, where FP unavail interrupts are intercepted and redirected to the ProgramCheck exception path for correct emulation handling. (If we run out of CPU_FTR bits we could look to reclaim this bit by adding support to test the cpu_user_features for PPC_FEATURE_HAS_FPU instead) It adds a nop to the exception path for 32-bit processors with a FPU. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | [POWERPC] Add SPURR SPR to sysfsAnton Blanchard2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | Now we have a SPURR cpu feature bit, we can export it to userspace in sysfs. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add DSCR SPR to sysfsAnton Blanchard2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | POWER6 adds a new SPR, the data stream control register (DSCR). It can be used to adjust how agressive the prefetch mechanisms are. Its possible we may want to context switch this, but for now just export it to userspace via sysfs so we can adjust it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Fix mmap of PCI resource with hack for XBenjamin Herrenschmidt2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc version of pci_resource_to_user() and associated hooks used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some time on machines that don't have a 1:1 mapping of devices (basically on non-PowerMacs) and have PCI devices above 32 bits. This attempts to fix it as well as possible. The rule is supposed to be that pci_resource_to_user() always converts the resources back into a BAR values since that's what the /proc interface was supposed to deal with. However, for X to work on platforms where PCI MMIO is not mapped 1:1, it became a habit of platforms like powerpc to pass "fixed up" values there since X expects to be able to use values from /proc/bus/pci/devices as offsets to mmap of /dev/mem... So we keep that contraption here, causing also /sys/*/resource to expose fully absolute MMIO addresses instead of BAR values, which is ugly, but should still work as long as those are only used to calculate alignment within a page. X is still broken when built 32 bits on machines where PCI MMIO can be above 32-bit space unfortunately. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Add rtas_service_present() helperNathan Lynch2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To test for the existence of an RTAS function, we typically do: foo_token = rtas_token("foo"); if (foo_token == RTAS_UNKNOWN_SERVICE) return; Add a rtas_service_present method, which provides a more conventional boolean interface for testing the existence of an RTAS method. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Delete unused irq functions on powerpcMatthew Wilcox2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | The ack_irq macro is unused and conflicts with James' work to template the generic irq code. mask_irq and unmask_irq are also unused, so delete those macros too. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Define pci_unmap_addr() et al. when CONFIG_NOT_COHERENT_CACHE=yRoland Dreier2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current PowerPC code makes pci_unmap_addr(), pci_unmap_addr_set(), and friends trivial for all 32-bit kernels. This is reasonable, since for those kernels it is true that pci_unmap_single() does not need the DMA address from the original DMA mapping -- in fact, it is a NOP. However, I recently tried the tg3 driver on a PowerPC 440SPe machine, which runs a 32-bit kernel and has non-cache-coherent PCI DMA. I found that the tg3 driver crashed in pci_dma_sync_single_for_cpu(), since for non-coherent systems, that function must invalidate the cache for the DMA address range requested, and therefore it does use the address passed in. tg3 uses a DMA address it stashes away with pci_unmap_addr_set() and retrieves with pci_unmap_addr(). Of course, since pci_unmap_addr() is defined to (0) right now, this doesn't work. It seems to me that the tg3 driver is using pci_unmap_addr() in a legitimate way -- I wouldn't want to have to teach all drivers that they should use pci_unmap_addr() if they only need the address for unmapping functions, but if they want the pci_dma_sync functions, then they have to store the DMA address without the helper macros. The right fix therefore seems to be in the definition of the macros in <asm/pci.h> -- we should use the trivial versions only for 32-bit kernels for coherent systems, and the real versions for both 64-bit kernels and non-coherent systems. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] cell: Fix spu_info.h header exportArnd Bergmann2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | It uses #ifdef __KERNEL__, so needs to be processed with unifdef. Signed-off-by: Arnd Bergann <arnd.bergmann@de.ibm.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * | [POWERPC] Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.cMichael Ellerman2006-12-07
| |/ | | | | | | | | | | | | | | | | | | | | | | Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c, this allows rtas_stop_self() to be static so remove the prototype. Wire up pSeries_mach_cpu_die() in the initcall, rather than statically in setup.c, the initcall will still run prior to the cpu hotplug code being callable, so there should be no change in behaviour. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] LOG2: Make powerpc's __ilog2_u64() take a 64-bit argumentDavid Howells2006-12-11
| | | | | | | | | | | | | | Make powerpc's __ilog2_u64() take a 64-bit argument. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] sched: add option to serialize load balancingChristoph Lameter2006-12-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Large sched domains can be very expensive to scan. Add an option SD_SERIALIZE to the sched domain flags. If that flag is set then we make sure that no other such domain is being balanced. [akpm@osdl.org: build fix] Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Peter Williams <pwil3058@bigpond.net.au> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "Chen, Kenneth W" <kenneth.w.chen@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] tty: switch to ktermiosAlan Cox2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the grungy swap all the occurrences in the right places patch that goes with the updates. At this point we have the same functionality as before (except that sgttyb() returns speeds not zero) and are ready to begin turning new stuff on providing nobody reports lots of bugs If you are a tty driver author converting an out of tree driver the only impact should be termios->ktermios name changes for the speed/property setting functions from your upper layers. If you are implementing your own TCGETS function before then your driver was broken already and its about to get a whole lot more painful for you so please fix it 8) Also fill in c_ispeed/ospeed on init for most devices, although the current code will do this for you anyway but I'd like eventually to lose that extra paranoia [akpm@osdl.org: bluetooth fix] [mp3@de.ibm.com: sclp fix] [mp3@de.ibm.com: warning fix for tty3270] [hugh@veritas.com: fix tty_ioctl powerpc build] [jdike@addtoit.com: uml: fix ->set_termios declaration] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Acked-by: Peter Oberparleiter <oberpar@de.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] tty: preparatory structures for termios revampAlan Cox2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to sort out our struct termios and add proper speed control we need to separate the kernel and user termios structures. Glibc is fine but the other libraries rely on the kernel exported struct termios and we need to extend this without breaking the ABI/API To do so we add a struct ktermios which is the kernel view of a termios structure and overlaps the struct termios with extra fields on the end for now. (That limitation will go away in later patches). Some platforms (eg alpha) planned ahead and thus use the same struct for both, others did not. This just adds the structures but does not use them, it seems a sensible splitting point for bisect if there are compile failures (not that I expect them) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] LOG2: Provide ilog2() fallbacks for powerpcDavid Howells2006-12-08
|/ | | | | | | | | | | Provide ilog2() fallbacks for powerpc for 32-bit numbers and 64-bit numbers on ppc64. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] cleanup asm/setup.h userspace visibilityAdrian Bunk2006-12-07
| | | | | | | | | | | | | | | | | | Make the contents of the userspace asm/setup.h header consistent on all architectures: - export setup.h to userspace on all architectures - export only COMMAND_LINE_SIZE to userspace - frv: move COMMAND_LINE_SIZE from param.h - i386: remove duplicate COMMAND_LINE_SIZE from param.h - arm: - export ATAGs to userspace - change u8/u16/u32 to __u8/__u16/__u32 Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Pass struct dev pointer to dma_cache_sync()Ralf Baechle2006-12-07
| | | | | | | | | | | | | | | | | Pass struct dev pointer to dma_cache_sync() dma_cache_sync() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_cache_sync to take a struct device pointer as first argument and fix all its callers to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add struct dev pointer to dma_is_consistent()Ralf Baechle2006-12-07
| | | | | | | | | | | | | | | dma_is_consistent() is ill-designed in that it does not have a struct device pointer argument which makes proper support for systems that consist of a mix of coherent and non-coherent DMA devices hard. Change dma_is_consistent to take a struct device pointer as first argument and fix the sole caller to pass it. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] elf: Always define elf_addr_t in linux/elf.hMagnus Damm2006-12-07
| | | | | | | | | | | | | Define elf_addr_t in linux/elf.h. The size of the type is determined using ELF_CLASS. This allows us to remove the defines that today are spread all over .c and .h files. Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Cc: Daniel Jacobowitz <drow@false.org> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] remove kernel syscallsArnd Bergmann2006-12-07
| | | | | | | | | | | | The last thing we agreed on was to remove the macros entirely for 2.6.19, on all architectures. Unfortunately, I think nobody actually _did_ that, so they are still there. [akpm@osdl.org: x86_64 fix] Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Schafer <gschafer@zip.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] slab: remove kmem_cache_tChristoph Lameter2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mm: pagefault_{disable,enable}()Peter Zijlstra2006-12-07
| | | | | | | | | | | | | | | | | | | | Introduce pagefault_{disable,enable}() and use these where previously we did manual preempt increments/decrements to make the pagefault handler do the atomic thing. Currently they still rely on the increased preempt count, but do not rely on the disabled preemption, this might go away in the future. (NOTE: the extra barrier() in pagefault_disable might fix some holes on machines which have too many registers for their own good) [heiko.carstens@de.ibm.com: s390 fix] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Centralise definitions of sector_t and blkcnt_tMatthew Wilcox2006-12-04
| | | | | | | | | | | | | | | | CONFIG_LBD and CONFIG_LSF are spread into asm/types.h for no particularly good reason. Centralising the definition in linux/types.h means that arch maintainers don't need to bother adding it, as well as fixing the problem with x86-64 users being asked to make a decision that has absolutely no effect. The H8/300 porters seem particularly confused since I'm not aware of any microcontrollers that need to support 2TB filesystems. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [POWERPC] Fix cputable.h for combined buildStephen Rothwell2006-12-04
| | | | | | | Remove CPU_FTR_16M_PAGE from the cupfeatures mask at runtime on iSeries. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add common routines for 52xx support in arch/powerpcGrant Likely2006-12-04
| | | | | | | | | | Adds utility routines used by 52xx device drivers and board support code. Main functionality is to add device nodes to the of_platform_bus, retrieve the IPB bus frequency, and find+ioremap device registers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Separate IRQ config / register set from main headerSylvain Munaut2006-12-04
| | | | | | | | | There is no need to expose these settings outside the scope of the interrupt controller code itself. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Provide dummy hard_irq_enable/disable() for PPC32Michael Ellerman2006-12-04
| | | | | | | | | | | | | | To allow arch/powerpc/kernel/crash.c to build on 32-bit we need a definition of hard_irq_disable(). 32-bit doesn't support the lazy interrupt disabling mechanism, so on 32-bit hard_irq_disable() is simply local_irq_disable(). Add a definition for hard_irq_enable() just for completeness. This allows (KEXEC=y && PPC32=y) to build again. Broken since d04c56f73c30a5e593202ecfcf25ed43d42363a2. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] include/asm-powerpc/: "extern inline" -> "static inline"Adrian Bunk2006-12-04
| | | | | | | | | | | | | "extern inline" generates a warning with -Wmissing-prototypes and I'm currently working on getting the kernel cleaned up for adding this to the CFLAGS since it will help us to avoid a nasty class of runtime errors. If there are places that really need a forced inline, __always_inline would be the correct solution. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] fix building without PCIArnd Bergmann2006-12-04
| | | | | | | | At least the ide driver calls pcibus_to_node, which is not defined when CONFIG_PCI is disabled. This adds a nop function for the !PCI case. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: multiplatform build fixesArnd Bergmann2006-12-04
| | | | | | | | | | | | | | | | | | | | | A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: Missed renames of CONFIG_PS3 to CONFIG_PPC_PS3Geert Uytterhoeven2006-12-04
| | | | | | | | | | When renaming CONFIG_PS3 to CONFIG_PPC_PS3, a few occurrences have been missed. I also fixed up the alignment in arch/powerpc/platforms/Makefile. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] cell: fix building without spufsArnd Bergmann2006-12-04
| | | | | | | | | It may be desireable to build a kernel for cell without spufs, e.g. as the initial kboot kernel. This requires that the SPU specific parts of the core dump and the xmon code depend on CONFIG_SPU_BASE instead of CONFIG_PPC_CELL. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: add ps3 platform system bus supportGeoff Levand2006-12-04
| | | | | | | | Adds a PS3 system bus driver. This system bus is a virtual bus used to present the PS3 system devices in the LDM. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: add lpar addressingGeoff Levand2006-12-04
| | | | | | | | | Adds some needed bits for a config option PS3_USE_LPAR_ADDR that disables the PS3 lpar address translation mechanism. This is a currently needed workaround for limitations in the design of the generic cell spu support. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: add repository supportGeoff Levand2006-12-04
| | | | | | | Adds support for the PS3 repository. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: add feature bitsGeoff Levand2006-12-04
| | | | | | | Adds the needed firmware feature bits for the PS3. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
* [POWERPC] ps3: add lv1 hvcallsGeoff Levand2006-12-04
| | | | | | | Adds the PS3 hvcalls. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-27 03:18:47 -0500