| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We already allow local SH locks while we hold a cached EX glock, so here
we allow DF locks as well. This works only because we rely on the VFS's
invalidation for locally cached data, and because if we hold an EX lock,
then we know that no other node can be caching data relating to this
file.
It dramatically speeds up initial writes to O_DIRECT files since we fall
back to buffered I/O for this and would otherwise bounce between DF and
EX modes on each and every write call. The lessons to be learned from
that are to ensure that (for the time being anyway) O_DIRECT files are
preallocated and that they are written to using reasonably large I/O
sizes. Even so this change fixes that corner case nicely
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
There is a race in the delayed demote code where it does the wrong thing
if a demotion to UN has occurred for other reasons before the delay has
expired. This patch adds an assert to catch that condition as well as
fixing the root cause by adding an additional check for the UN state.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GFS2 calls permission() to verify permissions after locks on the files
have been taken.
For this it's sufficient to call gfs2_permission() instead. This
results in the following changes:
- IS_RDONLY() check is not performed
- IS_IMMUTABLE() check is not performed
- devcgroup_inode_permission() is not called
- security_inode_permission() is not called
IS_RDONLY() should be unnecessary anyway, as the per-mount read-only
flag should provide protection against read-only remounts during
operations. do_gfs2_set_flags() has been fixed to perform
mnt_want_write()/mnt_drop_write() to protect against remounting
read-only.
IS_IMMUTABLE has been added to gfs2_permission()
Repeating the security checks seems to be pointless, as they don't
normally change, and if they do, it's independent of the filesystem
state.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
| |
Two lines missed from the previous patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
| |
I discovered that we had a list onto which every lock_dlm
lock was being put. Its only function was to discover whether
we'd got any locks left after umount. Since there was already
a counter for that purpose as well, I removed the list. The
saving is sizeof(struct list_head) per glock - well worth
having.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
| |
This is only used by GFS1 so can be removed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are several reasons why this is undesirable:
1. It never happens during normal operation anyway
2. If it does happen it causes performance to be very, very poor
3. It isn't likely to solve the original problem (memory shortage
on remote DLM node) it was supposed to solve
4. It uses a bunch of arbitrary constants which are unlikely to be
correct for any particular situation and for which the tuning seems
to be a black art.
5. In an N node cluster, only 1/N of the dropped locked will actually
contribute to solving the problem on average.
So all in all we are better off without it. This also makes merging
the lock_dlm module into GFS2 a bit easier.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes Red Hat bugzilla bug 450156.
This started with a not-too-improbable mount failure because the
locking protocol was never set back to its proper "lock_dlm" after the
system was rebooted in the middle of a gfs2_fsck. That left a
(purposely) invalid locking protocol in the superblock, which caused an
error when the file system was mounted the next time.
When there's an error mounting, vfs calls DQUOT_OFF, which calls
vfs_quota_off which calls gfs2_sync_fs. Next, gfs2_sync_fs calls
gfs2_log_flush passing s_fs_info. But due to the error, s_fs_info
had been previously set to NULL, and so we have the kernel oops.
My solution in this patch is to test for the NULL value before passing
it. I tested this patch and it fixes the problem.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous attempt to fix the locking in readpage failed due
to the use of a "try lock" which resulted in occasional high
cpu usage during testing (due to repeated tries) and also it
did not resolve all the ordering problems wrt the transaction
lock (although it did solve all the inode lock ordering problems).
This patch avoids the problem by unlocking the page and getting the
locks in the correct order. This means that we have to retest the
page to ensure that it hasn't changed when we relock the page.
This now passes the tests which were previously failing.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
| |
The patch to remove lock_nolock managed to get the arguments
of this list_add backwards. This fixes it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
| |
Annotate the &sdp->sd_log_lock.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
This patch merges the lock_nolock module into GFS2 itself. As well as removing
some of the overhead of the module, it also means that its now impossible to
build GFS2 without a lock module (which would be a pointless thing to do
anyway).
We also plan to merge lock_dlm into GFS2 in the future, but that is a more
tricky task, and will therefore be a separate patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: David Teigland <teigland@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This looks like a lot of change, but in fact its not. Mostly its
things moving from one file to another. The change is just that
instead of queuing lock completions and callbacks from the DLM
we now pass them directly to GFS2.
This gives us a net loss of two list heads per glock (a fair
saving in memory) plus a reduction in the latency of delivering
the messages to GFS2, plus we now have one thread fewer as well.
There was a bug where callbacks and completions could be delivered
in the wrong order due to this unnecessary queuing which is fixed
by this patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch implements a number of cleanups to the core of the
GFS2 glock code. As a result a lot of code is removed. It looks
like a really big change, but actually a large part of this patch
is either removing or moving existing code.
There are some new bits too though, such as the new run_queue()
function which is considerably streamlined. Highlights of this
patch include:
o Fixes a cluster coherency bug during SH -> EX lock conversions
o Removes the "glmutex" code in favour of a single bit lock
o Removes the ->go_xmote_bh() for inodes since it was duplicating
->go_lock()
o We now only use the ->lm_lock() function for both locks and
unlocks (i.e. unlock is a lock with target mode LM_ST_UNLOCKED)
o The fast path is considerably shortly, giving performance gains
especially with lock_nolock
o The glock_workqueue is now used for all the callbacks from the DLM
which allows us to simplify the lock_dlm module (see following patch)
o The way is now open to make further changes such as eliminating the two
threads (gfs2_glockd and gfs2_scand) in favour of a more efficient
scheme.
This patch has undergone extensive testing with various test suites
so it should be pretty stable by now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Bob Peterson <rpeterso@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes bz 450641.
This patch changes the computation for zero_metapath_length(), which it
renames to metapath_branch_start(). When you are extending the metadata
tree, The indirect blocks that point to the new data block must either
diverge from the existing tree either at the inode, or at the first
indirect block. They can diverge at the first indirect block because the
inode has room for 483 pointers while the indirect blocks have room for
509 pointers, so when the tree is grown, there is some free space in the
first indirect block. What metapath_branch_start() now computes is the
height where the first indirect block for the new data block is located.
It can either be 1 (if the indirect block diverges from the inode) or 2
(if it diverges from the first indirect block).
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
| |
This patch fixes bugzilla bug bz448866: gfs2: BUG: unable to
handle kernel paging request at ffff81002690e000.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
| |
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
| |
|
|
|
|
|
| |
Fix a sign issue in xdr_decode_fhstatus3()
Fix incorrect comparison in nfs_validate_mount_data()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
| |
|
|
|
|
|
| |
This appears to fix the Oops reported in
http://bugzilla.kernel.org/show_bug.cgi?id=10826
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Christian Borntraeger reported that reinstating cond_resched() with
CONFIG_PREEMPT caused a performance regression on lmbench:
For example select file 500:
23 microseconds
32 microseconds
and that's really because we totally unnecessarily do the cond_resched()
in the innermost loop of select(), which is just silly.
This moves it out from the innermost loop (which only ever loops ove the
bits in a single "unsigned long" anyway), which makes the performance
regression go away.
Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Ext4: Fix online resize block group descriptor corruption
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This is the patch for the group descriptor table corruption during
online resize pointed out by Theodore Tso. The problem was caused by
the fact that the ext4 group descriptor can be either 32 or 64 bytes
long. Only the 64 bytes structure was taken into account.
Signed-off-by: Frederic Bohe <frederic.bohe@bull.net>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: restore UDFFS_DEBUG to being undefined by default
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 706047a79725b585cf272fdefc234b31b6545c72, "udf: Fix compilation
warnings when UDF debug is on" inadvertently (I assume) enabled
debugging messages by default for UDF. This patch disables them again.
Signed-off-by: Paul Collins <paul@ondioline.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Use max not min to enforce a lower limit on the max I/O size.
This bug was introduced by "fuse: fix max i/o size calculation" (commit
e5d9a0df07484d6d191756878c974e4307fb24ce).
Thanks to Brian Wang for noticing.
Reported-by: Brian Wang <ywang221@hotmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Szabolcs Szakacsits <szaka@ntfs-3g.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\ \ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: Remove ->hangup() from stack glue operations.
ocfs2: Move the call of ocfs2_hb_ctl into the stack glue.
ocfs2: Move the hb_ctl_path sysctl into the stack glue.
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that
the generic stack glue code handles this, the underlying stack drivers
don't need to know about it.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Take o2hb_stop() out of the o2cb code and make it part of the generic
stack glue as ocfs2_leave_group(). This also allows us to remove the
ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now
part of stackglue.c. o2cb no longer needs a ->hangup() function.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
| | |/ /
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
ocfs2 needs to call out to the hb_ctl program at unmount for all cluster
stacks. The first step is to move the hb_ctl_path sysctl out of the
o2cb code and into the generic stack glue.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In commit d20894a23708c2af75966534f8e4dedb46d48db2 ("Remove a.out
interpreter support in ELF loader"), Andi removed support for a.out
interpreters from the ELF loader, which was only ever needed for the
transition from a.out to ELF.
This removes the last traces of that support, in particular the
inclusion of <linux/a.out.h>.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |/ /
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We only need it for the /sbin/loader hack for OSF/1 executables, and we
don't want to include it otherwise.
While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT'
in the ifdef around that code. It's already dependent on __alpha__, and
CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We were walking right into huge page areas in the pagemap walker, and
calling the pmds pmd_bad() and clearing them.
That leaked huge pages. Bad.
This patch at least works around that for now. It ignores huge pages in
the pagemap walker for the time being, and won't leak those pages.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
We need this at least for huge page detection for now, because powerpc
needs the vm_area_struct to be able to determine whether a virtual address
is referring to a huge page (its pmd_huge() doesn't work).
It might also come in handy for some of the other users.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
New chmod() allows only acceptable permission, and if not acceptable, it
returns -EPERM. Old one allows even if it can't store permission to on
disk inode. But it seems too strict for users.
E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one,
rsync couldn't create the temporary file.
So, this patch allows like old one, but now it doesn't change the
permission if it can't store, and it returns 0.
Also, this patch fixes missing check.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
[CIFS] cifs: fix oops on mount when CONFIG_CIFS_DFS_UPCALL is enabled
[CIFS] Fix hang in mount when negprot causes server to kill tcp session
disable most mode changes on non-unix/non-cifsacl mounts
[CIFS] Correct incorrect obscure open flag
[CIFS] warn if both dynperm and cifsacl mount options specified
silently ignore ownership changes unless unix extensions are enabled or we're faking uid changes
[CIFS] remove trailing whitespace
when creating new inodes, use file_mode/dir_mode exclusively on mount without unix extensions
on non-posix shares, clear write bits in mode when ATTR_READONLY is set
[CIFS] remove unused variables
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
simple "mount -t cifs //xxx /mnt" oopsed on strlen of options
http://kerneloops.org/guilty.php?guilty=cifs_get_sb&version=2.6.25-release&start=16711 \
68&end=1703935&class=oops
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| | |
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
CIFS currently allows you to change the mode of an inode on a share that
doesn't have unix extensions enabled, and isn't using cifsacl. The inode
in this case *only* has its mode changed in memory on the client. This
is problematic since it can change any time the inode is purged from the
cache.
This patch makes cifs_setattr silently ignore most mode changes when
unix extensions and cifsacl support are not enabled, and when the share
is not mounted with the "dynperm" option. The exceptions are:
When a mode change would remove all write access to an inode we turn on
the ATTR_READONLY bit on the server and remove all write bits from the
inode's mode in memory.
When a mode change would add a write bit to an inode that previously had
them all turned off, it turns off the ATTR_READONLY bit on the server,
and resets the mode back to what it would normally be (generally, the
file_mode or dir_mode of the share).
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| |
| | |
Also add defines for pipe subcommand codes
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| | |
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
we're faking uid changes
CIFS currently allows you to change the ownership of a file, but unless
unix extensions are enabled this change is not passed off to the server.
Have CIFS silently ignore ownership changes that can't be persistently
stored on the server unless the "setuids" option is explicitly
specified.
We could return an error here (-EOPNOTSUPP or something), but this is
how most disk-based windows filesystems on behave on Linux (e.g. VFAT,
NTFS, etc). With cifsacl support and proper Windows to Unix idmapping
support, we may be able to do this more properly in the future.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| | |
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
without unix extensions
When CIFS creates a new inode on a mount without unix extensions, it
temporarily assigns the mode that was passed to it in the create/mkdir
call. Eventually, when the inode is revalidated, it changes to have the
file_mode or dir_mode for the mount. This is confusing to users who
expect that the mode shouldn't change this way. It's also problematic
since only the mode is treated this way, not the uid or gid. Suppose you
have a CIFS mount that's mounted with:
uid=0,gid=0,file_mode=0666,dir_mode=0777
...if an unprivileged user comes along and does this on the mount:
mkdir -m 0700 foo
touch foo/bar
...there is a period of time where the touch will fail, since the dir
will initially be owned by root and have mode 0700. If the user waits
long enough, then "foo" will be revalidated and will get the correct
dir_mode permissions.
This patch changes cifs_mkdir and cifs_create to not overwrite the
mode found by the initial cifs_get_inode_info call after the inode is
created on the server. Legacy behavior can be reenabled with the
new "dynperm" mount option.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When mounting a share with posix extensions disabled,
cifs_get_inode_info turns off all the write bits in the mode for regular
files if ATTR_READONLY is set. Directories and other inode types,
however, can also have ATTR_READONLY set, but the mode gives no
indication of this.
This patch makes this apply to other inode types besides regular files.
It also cleans up how modes are set in cifs_get_inode_info for both the
"normal" and "dynperm" cases.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| | |
| |
| |
| |
| | |
CC: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: enable barriers by default
jbd2: Fix barrier fallback code to re-lock the buffer head
ext4: Display the journal_async_commit mount option in /proc/mounts
jbd2: If a journal checksum error is detected, propagate the error to ext4
jbd2: Fix memory leak when verifying checksums in the journal
ext4: fix online resize bug
ext4: Fix uninit block group initialization with FLEX_BG
ext4: Fix use of uninitialized data with debug enabled.
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
I can't think of any valid reason for ext4 to not use barriers when
they are available; I believe this is necessary for filesystem
integrity in the face of a volatile write cache on storage.
An administrator who trusts that the cache is sufficiently battery-
backed (and power supplies are sufficiently redundant, etc...)
can always turn it back off again.
SuSE has carried such a patch for ext3 for quite some time now.
Also document the mount option while we're at it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If the device doesn't support write barriers, the write is retried
without ordered mode. But the buffer head needs to be re-locked or
submit_bh will fail with on BUG(!buffer_locked(bh)).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
| | | |
| | |
| | |
| | |
| | |
| | | |
Cc: Andreas Dilger <adilger@clusterfs.com>
Cc: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If a journal checksum error is detected, the ext4 filesystem will call
ext4_error(), and the mount will either continue, become a read-only
mount, or cause a kernel panic based on the superblock flags
indicating the user's preference of what to do in case of filesystem
corruption being detected.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
