aboutsummaryrefslogtreecommitdiffstats
path: root/fs
Commit message (Collapse)AuthorAge
* ext4: Always set dx_node's fake_dirent explicitly.Andreas Schlick2009-09-10
| | | | | | | | | | When ext4_dx_add_entry() has to split an index node, it has to ensure that name_len of dx_node's fake_dirent is also zero, because otherwise e2fsck won't recognise it as an intermediate htree node and consider the htree to be corrupted. Signed-off-by: Andreas Schlick <schlick@lavabit.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix async commit mode to be safe by using a barrierTheodore Ts'o2009-09-11
| | | | | | | | | | | | | | | | | | | | | | | | | Previously the journal_async_commit mount option was equivalent to using barrier=0 (and just as unsafe). This patch fixes it so that we eliminate the barrier before the commit block (by not using ordered mode), and explicitly issuing an empty barrier bio after writing the commit block. Because of the journal checksum, it is safe to do this; if the journal blocks are not all written before a power failure, the checksum in the commit block will prevent the last transaction from being replayed. Using the fs_mark benchmark, using journal_async_commit shows a 50% improvement: FSUse% Count Size Files/sec App Overhead 8 1000 10240 30.5 28242 vs. FSUse% Count Size Files/sec App Overhead 8 1000 10240 45.8 28620 Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Don't update superblock write time when filesystem is read-onlyTheodore Ts'o2009-09-10
| | | | | | | | | | | This avoids updating the superblock write time when we are mounting the root file system read/only but we need to replay the journal; at that point, for people who are east of GMT and who make their clock tick in localtime for Windows bug-for-bug compatibility, and this will cause e2fsck to complain and force a full file system check. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Clarify the locking details in mballocAneesh Kumar K.V2009-09-09
| | | | | | | | | We don't need to take the alloc_sem lock when we are adding new groups, since mballoc won't see the new group added until we bump sbi->s_groups_count. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* ext4: check for need init flag in ext4_mb_load_buddyAneesh Kumar K.V2009-09-09
| | | | | | | | | | | | | We should check for need init flag with the group's alloc_sem held, to make sure while we are loading the buddy cache and holding a reference to it, a file system resize can't add new blocks to same group. The patch also drops the need init flag check in ext4_mb_regular_allocator() because doing the check without holding alloc_sem is racy. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* ext4: move ext4_mb_init_group() function earlier in the mballoc.cAneesh Kumar K.V2009-09-09
| | | | | | | | This moves the function around so that it can be called from ext4_mb_load_buddy(). Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Make non-journal fsync work properlyFrank Mayhar2009-09-09
| | | | | | | | | | | | | | | | | | | Teach ext4_write_inode() and ext4_do_update_inode() about non-journal mode: If we're not using a journal, ext4_write_inode() now calls ext4_do_update_inode() (after getting the iloc via ext4_get_inode_loc()) with a new "do_sync" parameter. If that parameter is nonzero _and_ we're not using a journal, ext4_do_update_inode() calls sync_dirty_buffer() instead of ext4_handle_dirty_metadata(). This problem was found in power-fail testing, checking the amount of loss of files and blocks after a power failure when using fsync() and when not using fsync(). It turned out that using fsync() was actually worse than not doing so, possibly because it increased the likelihood that the inodes would remain unflushed and would therefore be lost at the power failure. Signed-off-by: Frank Mayhar <fmayhar@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Assure that metadata blocks are written during fsync in no journal modeTheodore Ts'o2009-09-12
| | | | | | | | | | | When there is no journal present, we must attach buffer heads associated with extent tree and indirect blocks to the inode's mapping->private_list via mark_buffer_dirty_inode() so that ext4_sync_file() --- which is called to service fsync() and fdatasync() system calls --- can write out the inode's metadata blocks by calling sync_mapping_buffers(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Use bforget() in no journal mode for ext4_journal_{forget,revoke}()Theodore Ts'o2009-09-09
| | | | | | | | | | | | | | | | When ext4 is using a journal, a metadata block which is deallocated must be passed into the journal layer so it can be dropped from the current transaction and/or revoked. This is done by calling the functions ext4_journal_forget() and ext4_journal_revoke(), which call jbd2_journal_forget(), and jbd2_journal_revoke(), respectively. Since the jbd2_journal_forget() and jbd2_journal_revoke() call bforget(), if ext4 is not using a journal, ext4_journal_forget() and ext4_journal_revoke() must call bforget() to avoid a dirty metadata block overwriting a block after it has been reallocated and reused for another inode's data block. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: print more sysadmin-friendly message in check_block_validity()Theodore Ts'o2009-09-08
| | | | | | | | | | Drop the WARN_ON(1), as he stack trace is not appropriate, since it is triggered by file system corruption, and it misleads users into thinking there is a kernel bug. In addition, change the message displayed by ext4_error() to make it clear that this is a file system corruption problem. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Take page lock before looking at attached buffer_heads flagsAneesh Kumar K.V2009-09-09
| | | | | | | | In order to check whether the buffer_heads are mapped we need to hold page lock. Otherwise a reclaim can cleanup the attached buffer_heads. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix small typo for move_extent_per_page()Akira Fujita2009-09-05
| | | | | | | | This function means moving extents every page, so change its name from move_exgtent_par_page(). Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.co.jp> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Return exchanged blocks count to user space in failureAkira Fujita2009-09-05
| | | | | | | | Return exchanged blocks count (moved_len) to user space, if ext4_move_extents() failed on the way. Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Remove unneeded BUG_ON() in ext4_move_extents()Akira Fujita2009-09-05
| | | | | | | | | | | | The ext4_move_extents() functions checks with BUG_ON() whether the exchanged blocks count accords with request blocks count. But, if the target range (orig_start + len) includes sparse block(s), 'moved_len' (exchanged blocks count) does not agree with 'len' (request blocks count), since sparse block is not counted in 'moved_len'. This causes us to hit the BUG_ON(), even though the function succeeded. Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix wrong comparisons in mext_check_arguments()Akira Fujita2009-09-16
| | | | | | | | | | | | The mext_check_arguments() function in move_extents.c has wrong comparisons. orig_start which is passed from user-space is block unit, but i_size of inode is byte unit, therefore the checks do not work fine. This mis-check leads to the overflow of 'len' and then hits BUG_ON() in ext4_move_extents(). The patch fixes this issue. Signed-off-by: Akira Fujita <a-fujita@rs.jp.nec.com> Reviewed-by: Greg Freemyer <greg.freemyer@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix cache flush in ext4_sync_fileChristoph Hellwig2009-09-05
| | | | | | | | | | | | | We need to flush the write cache unconditionally in ->fsync, otherwise writes into already allocated blocks can get lost. Writes into fully allocated files are very common when using disk images for virtualization, and without this fix can easily lose data after an fdatasync, which is the typical implementation for a cache flush on the virtual drive. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Remove journal_checksum mount option and enable it by defaultTheodore Ts'o2009-09-05
| | | | | | | | | There's no real cost for the journal checksum feature, and we should make sure it is enabled all the time. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Declare seq_operations and file_operations structures as constTobias Klauser2009-09-05
| | | | | Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Add new tracepoint: trace_ext4_da_write_pages()Theodore Ts'o2009-08-31
| | | | | | | Add a new tracepoint which shows the pages that will be written using write_cache_pages() by ext4_da_writepages(). Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Restore wbc->range_start in ext4_da_writepages()Theodore Ts'o2009-08-31
| | | | | | | | | | | | | To solve a lock inversion problem, we implement part of the range_cyclic algorithm in ext4_da_writepages(). (See commit 2acf2c26 for more details.) As part of that change wbc->range_start was modified by ext4's writepages function, which causes its callers to get confused since they aren't expecting the filesystem to modify it. The simplest fix is to save and restore wbc->range_start in ext4_da_writepages. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Limit number of links that can be created by ext4_link()Theodore Ts'o2009-08-29
| | | | | | | | In ext4_link we need to check using EXT4_LINK_MAX, and not EXT4_DIR_LINK_MAX(), since ext4_link() is creating hard links of regular files, and not directories. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Allow rename to create more than EXT4_LINK_MAX subdirectoriesAneesh Kumar K.V2009-08-28
| | | | | | | | Use EXT4_DIR_LINK_MAX so that rename() can move a directory into new parent directory without running into the EXT4_LINK_MAX limit. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix extent sanity checking code with AGGRESSIVE_TESTTheodore Ts'o2009-08-28
| | | | | | | | | | | | | | | The extents sanity-checking code depends on the ext4_ext_space_*() functions returning the maximum alloable size for eh_max; however, when the debugging #ifdef AGGRESSIVE_TEST is enabled to test the extent tree handling code, this prevents a normally created ext4 filesystem from being mounted with the errors: Aug 26 15:43:50 bsd086 kernel: [ 96.070277] EXT4-fs error (device sda8): ext4_ext_check_inode: bad header/extent in inode #8: too large eh_max - magic f30a, entries 1, max 4(3), depth 0(0) Aug 26 15:43:50 bsd086 kernel: [ 96.070526] EXT4-fs (sda8): no journal found Bug reported by Akira Fujita. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: use ext4_grpblk_t more extensivelyEric Sandeen2009-08-25
| | | | | | | | | | | | | | | | | unsigned short is potentially too small to track blocks within a group; today it is safe due to restrictions in e2fsprogs but we have _lo / _hi bits for group blocks with the intent to go up to 32 bits, so clean this up now. There are many more places where we use unsigned/int/unsigned int to contain a group block but this should at least fix all the short types. I added a few comments to the struct ext4_group_info definition as well. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: use variables not types in sizeofs() for allocationsEric Sandeen2009-08-25
| | | | | | | | | Precursor to changing some types; to keep things in sync, it seems better to allocate/memset based on the size of the variables we are using rather than on some disconnected basic type like "unsigned short" Signed-off-by: Eric Sandeen <sandeen@redhat.com>
* ext4: Add missing unlock_new_inode() call in extent migration codeAneesh Kumar K.V2009-08-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to unlock the new inode before iput. This patch fixes the following warning when calling chattr +e to migrate a file to use extents. It also fixes problems in when e4defrag attempts to defragment an inode. [ 470.400044] ------------[ cut here ]------------ [ 470.400065] WARNING: at fs/inode.c:1210 generic_delete_inode+0x65/0x16a() [ 470.400072] Hardware name: N/A ..... ... [ 470.400353] Pid: 4451, comm: chattr Not tainted 2.6.31-rc7-red-debug #4 [ 470.400359] Call Trace: [ 470.400372] [<ffffffff81037771>] warn_slowpath_common+0x77/0x8f [ 470.400385] [<ffffffff81037798>] warn_slowpath_null+0xf/0x11 [ 470.400395] [<ffffffff810b7f28>] generic_delete_inode+0x65/0x16a [ 470.400405] [<ffffffff810b8044>] generic_drop_inode+0x17/0x1bd [ 470.400413] [<ffffffff810b7083>] iput+0x61/0x65 [ 470.400455] [<ffffffffa003b229>] ext4_ext_migrate+0x5eb/0x66a [ext4] [ 470.400492] [<ffffffffa002b1f8>] ext4_ioctl+0x340/0x756 [ext4] [ 470.400507] [<ffffffff810b1a91>] vfs_ioctl+0x1d/0x82 [ 470.400517] [<ffffffff810b1ff0>] do_vfs_ioctl+0x483/0x4c9 [ 470.400527] [<ffffffff81059c30>] ? trace_hardirqs_on+0xd/0xf [ 470.400537] [<ffffffff810b2087>] sys_ioctl+0x51/0x74 [ 470.400549] [<ffffffff8100ba6b>] system_call_fastpath+0x16/0x1b [ 470.400557] ---[ end trace ab85723542352dac ]--- Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Add feature set check helper for mount & remount pathsEric Sandeen2009-08-18
| | | | | | | | | | | | | | | | | | | | | A user reported that although his root ext4 filesystem was mounting fine, other filesystems would not mount, with the: "Filesystem with huge files cannot be mounted RDWR without CONFIG_LBDAF" error on his 32-bit box built without CONFIG_LBDAF. This is because the test at mount time for this situation was not being re-checked on remount, and the normal boot process makes an ro->rw transition, so this was being missed. Refactor to make a common helper function to test the filesystem features against the type of mount request (RO vs. RW) so that we stay consistent. Addresses Red-Hat-Bugzilla: #517650 Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* simplify some logic in ext4_mb_normalize_requestEric Sandeen2009-08-17
| | | | | | | | | | | | | | | | | | | | While reading through some of the mballoc code it seems that a couple spots in the size normalization function could be streamlined. The test for non-overlapping PAs can be or'd for the start & end conditions, and the tests for adjacent PAs can be else-if'd - it's essentially independently testing: if (A + B <= C) ... if (A > C) ... These cannot both be true so it seems like the else-if might be slightly more efficient and/or informative. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: open-code ext4_mb_update_group_infoEric Sandeen2009-08-17
| | | | | | | | | | | | | | ext4_mb_update_group_info is only called in one place, and it's extremely simple. There's no reason to have it in a separate function in a separate file as far as I can tell, it just obfuscates what's really going on. Perhaps it was intended to keep the grp->bb_* manipulation local to mballoc.c but we're already accessing other grp-> fields in balloc.c directly so this seems ok. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: reject too-large filesystems on 32-bit kernelsEric Sandeen2009-08-17
| | | | | | | | | | | | | | | ext4 will happily mount a > 16T filesystem on a 32-bit box, but this is not safe; writes to the block device will wrap past 16T and the page cache can't index past 16T (232 index * 4k pages). Adding another test to the existing "too many sectors" test should do the trick. Add a comment, a relevant return value, and fix the reference to the CONFIG_LBD(AF) option as well. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix possible deadlock between ext4_truncate() and ext4_get_blocks()Jan Kara2009-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | During truncate we are sometimes forced to start a new transaction as the amount of blocks to be journaled is both quite large and hard to predict. So far we restarted a transaction while holding i_data_sem and that violates lock ordering because i_data_sem ranks below a transaction start (and it can lead to a real deadlock with ext4_get_blocks() mapping blocks in some page while having a transaction open). We fix the problem by dropping the i_data_sem before restarting the transaction and acquire it afterwards. It's slightly subtle that this works: 1) By the time ext4_truncate() is called, all the page cache for the truncated part of the file is dropped so get_block() should not be called on it (we only have to invalidate extent cache after we reacquire i_data_sem because some extent from not-truncated part could extend also into the part we are going to truncate). 2) Writes, migrate or defrag hold i_mutex so they are stopped for all the time of the truncate. This bug has been found and analyzed by Theodore Tso <tytso@mit.edu>. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: Annotate transaction start also for jbd2_journal_restart()Jan Kara2009-08-17
| | | | | | | | | | lockdep annotation for a transaction start has been at the end of jbd2_journal_start(). But a transaction is also started from jbd2_journal_restart(). Move the lockdep annotation to start_this_handle() which covers both cases. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Show unwritten extent flag in ext4_ext_show_leaf()Mingming2009-09-18
| | | | | | | | | | | | ext4_ext_show_leaf() will display the leaf extents when extent debugging is enabled. Printing out the unwritten bit is useful for debugging unwritten extent, allow us to see the unwritten extents vs written extents, after the unwritten extents are splitted or converted. Signed-off-by: Mingming Cao <cmm@us.ibm.com>
* ext4: Compile warning fix when EXT_DEBUG enabledMingming2009-09-01
| | | | | | | | | | | | | | | | | | | | | | | When EXT_DEBUG is enabled I received the following compile warning on PPC64: CC [M] fs/ext4/inode.o CC [M] fs/ext4/extents.o fs/ext4/extents.c: In function ‘ext4_ext_rm_leaf’: fs/ext4/extents.c:2097: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘ext4_lblk_t’ fs/ext4/extents.c: In function ‘ext4_ext_get_blocks’: fs/ext4/extents.c:2789: warning: format ‘%u’ expects type ‘unsigned int’, but argument 4 has type ‘long unsigned int’ fs/ext4/extents.c:2852: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 3 has type ‘ext4_lblk_t’ fs/ext4/extents.c:2953: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘unsigned int’ CC [M] fs/ext4/migrate.o The patch fixes compile warning. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Index: linux-2.6.31-rc4/fs/ext4/extents.c ===================================================================
* ext4: Avoid group preallocation for closed filesTheodore Ts'o2009-09-18
| | | | | | | | | | | | | | | | | | | | | | Currently the group preallocation code tries to find a large (512) free block from which to do per-cpu group allocation for small files. The problem with this scheme is that it leaves the filesystem horribly fragmented. In the worst case, if the filesystem is unmounted and remounted (after a system shutdown, for example) we forget the fact that wee were using a particular (now-partially filled) 512 block extent. So the next time we try to allocate space for a small file, we will find *another* completely free 512 block chunk to allocate small files. Given that there are 32,768 blocks in a block group, after 64 iterations of "mount, write one 4k file in a directory, unmount", the block group will have 64 files, each separated by 511 blocks, and the block group will no longer have any free 512 completely free chunks of blocks for group preallocation space. So if we try to allocate blocks for a file that has been closed, such that we know the final size of the file, and the filesystem is not busy, avoid using group preallocation. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix bugs in mballoc's stream allocation modeTheodore Ts'o2009-08-09
| | | | | | | | | | | | | | | | The logic around sbi->s_mb_last_group and sbi->s_mb_last_start was all screwed up. These fields were getting unconditionally all the time, set even when stream allocation had not taken place, and if they were being used when the file was smaller than s_mb_stream_request, which is when the allocation should _not_ be doing stream allocation. Fix this by determining whether or not we stream allocation should take place once, in ext4_mb_group_or_file(), and setting a flag which gets used in ext4_mb_regular_allocator() and ext4_mb_use_best_found(). This simplifies the code and assures that we are consistently using (or not using) the stream allocation logic. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Display the mballoc flags in mb_history in hex instead of decimalTheodore Ts'o2009-08-09
| | | | | | | Displaying the flags in base 16 makes it easier to see which flags have been set. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Add configurable run-time mballoc debuggingTheodore Ts'o2009-09-18
| | | | | | | Allow mballoc debugging to be enabled at run-time instead of just at compile time. Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix journal ref count in move_extent_par_pagePeng Tao2009-08-10
| | | | | | | | | | | | move_extent_par_page calls a_ops->write_begin() to increase journal handler's reference count. However, if either mext_replace_branches() or ext4_get_block fails, the increased reference count isn't decreased. This will cause a later attempt to umount of the fs to hang forever. The patch addresses the issue by calling ext4_journal_stop() if page is not NULL (which means a_ops->write_end() isn't invoked). Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: round commit timer up to avoid uncommitted transactionAndreas Dilger2009-08-10
| | | | | | | | | | | fix jiffie rounding in jbd commit timer setup code. Rounding down could cause the timer to be fired before the corresponding transaction has expired. That transaction can stay not committed forever if no new transaction is created or expicit sync/umount happens. Signed-off-by: Alex Zhuravlev (Tomas) <alex.zhuravlev@sun.com> Signed-off-by: Andreas Dilger <adilger@sun.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: remove redundant test on unsignedRoel Kluin2009-08-10
| | | | | | | unsigned i_block cannot be less than 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: fix build warning when EXT4FS_DEBUG is onPeng Tao2009-07-27
| | | | | | | | | | | | | When compiling with EXT4FS_DEBUG on, gcc will complain with following warnings: linux-2.6/fs/ext4/ialloc.c: In function ‘ext4_count_free_inodes’: linux-2.6/fs/ext4/ialloc.c:1192: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘ext4_group_t’ So add a type cast to suppress it. Signed-off-by: Peng Tao <bergwolf@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix compile warnings with MB_DEBUGAkira Fujita2009-07-05
| | | | | | | | When MB_DEBUG is enabled, we get some compile warnings because ext4_group_t is unsigned int. This patch fixes them. Signed-off-by Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Remove unnecessary semicolons in mballoc.cJoe Perches2009-07-05
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: More buffer head reference leaksCurt Wohlgemuth2009-07-17
| | | | | | | | | | | | | | | | | | | | | | After the patch I posted last week regarding buffer head ref leaks in no-journal mode, I looked at all the code that uses buffer heads and searched for more potential leaks. The patch below fixes the issues I found; these can occur even when a journal is present. The change to inode.c fixes a double release if ext4_journal_get_create_access() fails. The changes to namei.c are more complicated. add_dirent_to_buf() will release the input buffer head EXCEPT when it returns -ENOSPC. There are some callers of this routine that don't always do the brelse() in the event that -ENOSPC is returned. Unfortunately, to put this fix into ext4_add_entry() required capturing the return value of make_indexed_dir() and add_dirent_to_buf(). Signed-off-by: Curt Wohlgemuth <curtw@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* jbd2: Fail to load a journal if it is too shortJan Kara2009-07-17
| | | | | | | | Due to on disk corruption, it can happen that journal is too short. Fail to load it in such case so that we don't oops somewhere later. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Avoid null pointer dereference when decoding EROFS w/o a journalTheodore Ts'o2009-07-27
| | | | | | | | We need to check to make sure a journal is present before checking the journal flags in ext4_decode_error(). Signed-off-by: Eric Sesterhenn <eric.sesterhenn@lsexperts.de> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix typo in ext4/KconfigManish Katiyar2009-07-27
| | | | | Signed-off-by: Manish Katiyar <mkatiyar@gmail.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* ext4: Fix memory leak fix when mounting an ext4 filesystemAneesh Kumar K.V2009-07-17
| | | | | | | | | | | | | | | | | The allocation of the ext4_group_info array was moved to a new function ext4_mb_add_group_info() in commit 5f21b0e6 so that online resize would use a common (and correct) codepath. Unfortunately, the call to the new ext4_mb_add_group_info() function was added without removing the code which originally allocated the array. This caused a memory leak each time an ext4 filesystem was mounted. The fix is simple; remove the code that did the original allocation, since it is no longer needed. Reported-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2009-09-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev debugfs: Modify default debugfs directory for debugging pktcdvd. debugfs: Modified default dir of debugfs for debugging UHCI. debugfs: Change debugfs directory of IWMC3200 debugfs: Change debuhgfs directory of trace-events-sample.h debugfs: Fix mount directory of debugfs by default in events.txt hpilo: add poll f_op hpilo: add interrupt handler hpilo: staging for interrupt handling driver core: platform_device_add_data(): use kmemdup() Driver core: Add support for compatibility classes uio: add generic driver for PCI 2.3 devices driver-core: move dma-coherent.c from kernel to driver/base mem_class: fix bug mem_class: use minor as index instead of searching the array driver model: constify attribute groups UIO: remove 'default n' from Kconfig Driver core: Add accessor for device platform data Driver core: move dev_get/set_drvdata to drivers/base/dd.c Driver core: add new device to bus's list before probing
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 11:39:46 -0500