aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/localalloc.c
Commit message (Collapse)AuthorAge
* ocfs2: Wrap inode block reads in a dedicated function.Joel Becker2009-01-05
| | | | | | | | | | | | | | | | | | | | | | | The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Make cached block reads the common case.Joel Becker2008-10-14
| | | | | | | | | | | ocfs2_read_blocks() currently requires the CACHED flag for cached I/O. However, that's the common case. Let's flip it around and provide an IGNORE_CACHE flag for the special users. This has the added benefit of cleaning up the code some (ignore_cache takes on its special meaning earlier in the loop). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Simplify ocfs2_read_block()Joel Becker2008-10-14
| | | | | | | | | | More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED. Only six pass a different flag set. Rather than have every caller care, let's make ocfs2_read_block() take no flags and always do a cached read. The remaining six places can call ocfs2_read_blocks() directly. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Require an inode for ocfs2_read_block(s)().Joel Becker2008-10-14
| | | | | | | | | | Now that synchronous readers are using ocfs2_read_blocks_sync(), all callers of ocfs2_read_blocks() are passing an inode. Use it unconditionally. Since it's there, we don't need to pass the ocfs2_super either. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Don't check for NULL before brelse()Mark Fasheh2008-10-13
| | | | | | This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
* ocfs2: make la_debug_mutex staticMark Fasheh2008-10-13
| | | | | | It can also be moved into ocfs2_la_debug_read(). Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Limit inode allocation to 32bits.Joel Becker2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ocfs2 inode numbers are block numbers. For any filesystem with less than 2^32 blocks, this is not a problem. However, when ocfs2 starts using JDB2, it will be able to support filesystems with more than 2^32 blocks. This would result in inode numbers higher than 2^32. The problem is that stat(2) can't handle those numbers on 32bit machines. The simple solution is to have ocfs2 allocate all inodes below that boundary. The suballoc code is changed to honor an optional block limit. Only the inode suballocator sets that limit - all other allocations stay unlimited. The biggest trick is to grow the inode suballocator beneath that limit. There's no point in allocating block groups that are above the limit, then rejecting their elements later on. We want to prevent the inode allocator from ever having block groups above the limit. This involves a little gyration with the local alloc code. If the local alloc window is above the limit, it signals the caller to try the global bitmap but does not disable the local alloc file (which can be used for other allocations). [ Minor cleanup - removed an ML_NOTICE comment. --Mark ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: track local alloc state via debugfsMark Fasheh2008-10-13
| | | | | | | | | | A per-mount debugfs file, "local_alloc" is created which when read will expose live state of the nodes local alloc file. Performance impact is minimal, only a bit of memory overhead per mount point. Still, the code is hidden behind CONFIG_OCFS2_FS_STATS. This feature will help us debug local alloc performance problems on a live system. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: throttle back local alloc when low on disk spaceMark Fasheh2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | Ocfs2's local allocator disables itself for the duration of a mount point when it has trouble allocating a large enough area from the primary bitmap. That can cause performance problems, especially for disks which were only temporarily full or fragmented. This patch allows for the allocator to shrink it's window first, before being disabled. Later, it can also be re-enabled so that any performance drop is minimized. To do this, we allow the value of osb->local_alloc_bits to be shrunk when needed. The default value is recorded in a mostly read-only variable so that we can re-initialize when required. Locking had to be updated so that we could protect changes to local_alloc_bits. Mostly this involves protecting various local alloc values with the osb spinlock. A new state is also added, OCFS2_LA_THROTTLED, which is used when the local allocator is has shrunk, but is not disabled. If the available space dips below 1 megabyte, the local alloc file is disabled. In either case, local alloc is re-enabled 30 seconds after the event, or when an appropriate amount of bits is seen in the primary bitmap. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Track local alloc bits internallyMark Fasheh2008-10-13
| | | | | | | | | Do this instead of tracking absolute local alloc size. This avoids needless re-calculatiion of bits from bytes in localalloc.c. Additionally, the value is now in a more natural unit for internal file system bitmap work. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefsJoel Becker2008-07-14
| | | | | | | | A couple places use OCFS2_DEBUG_FS where they really mean CONFIG_OCFS2_DEBUG_FS. Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Use GFP_NOFS in kmalloc during localalloc window moveSunil Mushran2008-04-30
| | | | | | | | | | | | | | | kmalloc() during a localalloc window move can trigger the mm to prune the dcache which inturn can trigger the fs to delete an inode causing it start a recursive transaction. The fix also makes the change in kmalloc during localalloc shutdown just to be safe. Fixes oss bugzilla#901 http://oss.oracle.com/bugzilla/show_bug.cgi?id=901 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add inode stealing for ocfs2_reserve_new_inodeTao Ma2008-04-18
| | | | | | | | | | Inode allocation is modified to look in other nodes allocators during extreme out of space situations. We retry our own slot when space is freed back to the global bitmap, or whenever we've allocated more than 1024 inodes from another slot. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Add ac_alloc_slot in ocfs2_alloc_contextTao Ma2008-04-18
| | | | | | | | | | | | In inode stealing, we no longer restrict the allocation to happen in the local node. So it is neccessary for us to add a new member in ocfs2_alloc_context to indicate which slot we are using for allocation. We also modify the process of local alloc so that this member can be used there also. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* [PATCH] ocfs2: le*_add_cpu conversionMarcin Slusarz2008-03-03
| | | | | | | | | | | | replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Enable localalloc for local mountsSunil Mushran2008-03-03
| | | | | | | | | Commit 2fbe8d1ebe004425b4f7b8bba345623d2280be82 disabled localalloc for local mounts. This caused issues as ocfs2 uses localalloc to provide write locality. This patch enables localalloc for local mounts. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Local alloc window size changeable via mount optionSunil Mushran2008-01-25
| | | | | | | | | | | | | | Local alloc is a performance optimization in ocfs2 in which a node takes a window of bits from the global bitmap and then uses that for all small local allocations. This window size is fixed to 8MB currently. This patch allows users to specify the window size in MB including disabling it by passing in 0. If the number specified is too large, the fs will use the default value of 8MB. mount -o localalloc=X /dev/sdX /mntpoint Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Rename ocfs2_meta_[un]lockMark Fasheh2008-01-25
| | | | | | | Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] ocfs2: Remove expensive bitmap scanningJan Kara2007-11-27
| | | | | | | | | | Enable expensive bitmap scanning only if DEBUG option is enabled. The bitmap scanning quite loads the CPU and on my machine the write throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync improves from 37 MB/s to 45.4 MB/s in local mode... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Unlock mutex in local alloc failure caseSunil Mushran2007-10-03
| | | | | | | | The fs was not unlocking the local alloc inode mutex in the code path in which it failed to find a window of free bits in the global bitmap. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Allow smaller allocations during large writesMark Fasheh2007-09-20
| | | | | | | | | | | | | | | | | | | | | | | | The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: fix inode leakMark Fasheh2007-05-25
| | | | | | | | | We weren't cleaning up our inode reference on error in ocfs2_reserve_local_alloc_bits(). Add a check for error return and iput() if need be. Move the code to set the alloc context inode info to the end of the function so we don't have any possibility of passing back a bad pointer. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] Fix numerous kcalloc() calls, convert to kzalloc()Robert P. J. Day2006-12-13
| | | | | | | | | | | | | | | | | | | All kcalloc() calls of the form "kcalloc(1,...)" are converted to the equivalent kzalloc() calls, and a few kcalloc() calls with the incorrect ordering of the first two arguments are fixed. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* ocfs2: Remove struct ocfs2_journal_handle in favor of handle_tMark Fasheh2006-12-01
| | | | | | | | | | This is mostly a search and replace as ocfs2_journal_handle is now no more than a container for a handle_t pointer. ocfs2_commit_trans() becomes very straight forward, and we remove some out of date comments / code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: remove handle argument to ocfs2_start_trans()Mark Fasheh2006-12-01
| | | | | | | | | All callers either pass in NULL directly, or a local variable that is already set to NULL. The internals of ocfs2_start_trans() get a nice cleanup as a result. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: pass ocfs2_super * into ocfs2_commit_trans()Mark Fasheh2006-12-01
| | | | | | This sets us up to remove handle->journal. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: remove unused handle argument from ocfs2_meta_lock_full()Mark Fasheh2006-12-01
| | | | | | Now that this is unused and all callers pass NULL, we can safely remove it. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: don't use handle for locking in allocation functionsMark Fasheh2006-12-01
| | | | | | | | | Instead we record our state on the allocation context structure which all callers already know about and lifetime correctly. This means the reservation functions don't need a handle passed in any more, and we can also take it off the alloc context. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: don't pass handle to ocfs2_meta_lock() in localalloc.cMark Fasheh2006-12-01
| | | | | | Take and drop the locks directly. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: remove ocfs2_journal_handle flags fieldMark Fasheh2006-12-01
| | | | | | | | Callers can set h_sync directly on the handle_t, whether a transaction has been started or not can be determined via the existence of the handle_t on the struct ocfs2_journal_handle. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: allocation hintsMark Fasheh2006-08-07
| | | | | | | | | Record the most recently used allocation group on the allocation context, so that subsequent allocations can attempt to optimize for contiguousness. Local alloc especially should benefit from this as the current chain search tends to let it spew across the disk. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: don't use MLF* in the file systemMark Fasheh2006-03-24
| | | | Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] mutex subsystem, semaphore to mutex: VFS, ->i_semJes Sorensen2006-01-09
| | | | | | | | | | | | | This patch converts the inode semaphore to a mutex. I have tested it on XFS and compiled as much as one can consider on an ia64. Anyway your luck with it might be different. Modified-by: Ingo Molnar <mingo@elte.hu> (finished the conversion) Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* [PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh2006-01-03
The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-13 17:36:37 -0500