aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/file.c
Commit message (Collapse)AuthorAge
* ocfs2: Make high level btree extend code genericTao Ma2008-10-13
| | | | | | | | | | Factor out the non-inode specifics of ocfs2_do_extend_allocation() into a more generic function, ocfs2_do_cluster_allocation(). ocfs2_do_extend_allocation calls ocfs2_do_cluster_allocation() now, but the latter can be used for other btree types as well. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Abstract ocfs2_extent_tree in b-tree operations.Tao Ma2008-10-13
| | | | | | | | | | | | | | | | | | | | | | | | | | In the old extent tree operation, we take the hypothesis that we are using the ocfs2_extent_list in ocfs2_dinode as the tree root. As xattr will also use ocfs2_extent_list to store large value for a xattr entry, we refactor the tree operation so that xattr can use it directly. The refactoring includes 4 steps: 1. Abstract set/get of last_eb_blk and update_clusters since they may be stored in different location for dinode and xattr. 2. Add a new structure named ocfs2_extent_tree to indicate the extent tree the operation will work on. 3. Remove all the use of fe_bh and di, use root_bh and root_el in extent tree instead. So now all the fe_bh is replaced with et->root_bh, el with root_el accordingly. 4. Make ocfs2_lock_allocators generic. Now it is limited to be only used in file extend allocation. But the whole function is useful when we want to store large EAs. Note: This patch doesn't touch ocfs2_commit_truncate() since it is not used for anything other than truncate inode data btrees. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Use ocfs2_extent_list instead of ocfs2_dinode.Tao Ma2008-10-13
| | | | | | | | | | | | ocfs2_extend_meta_needed(), ocfs2_calc_extend_credits() and ocfs2_reserve_new_metadata() are all useful for extent tree operations. But they are all limited to an inode btree because they use a struct ocfs2_dinode parameter. Change their parameter to struct ocfs2_extent_list (the part of an ocfs2_dinode they actually use) so that the xattr btree code can use these functions. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Modify ocfs2_num_free_extents for future xattr usage.Tao Ma2008-10-13
| | | | | | | | | | | ocfs2_num_free_extents() is used to find the number of free extent records in an inode btree. Hence, it takes an "ocfs2_dinode" parameter. We want to use this for extended attribute trees in the future, so genericize the interface the take a buffer head. A future patch will allow that buffer_head to contain any structure rooting an ocfs2 btree. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: POSIX file locks supportMark Fasheh2008-10-13
| | | | | | | | | | | | | | This is actually pretty easy since fs/dlm already handles the bulk of the work. The Ocfs2 userspace cluster stack module already uses fs/dlm as the underlying lock manager, so I only had to add the right calls. Cluster-aware POSIX locks ("plocks") can be turned off by the same means at UNIX locks - mount with 'noflocks', or create a local-only Ocfs2 volume. Internally, the file system uses two sets of file_operations, depending on whether cluster aware plocks is required. This turns out to be easier than implementing local-only versions of ->lock. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: fiemap supportMark Fasheh2008-10-03
| | | | | | | | | | | | | | Plug ocfs2 into ->fiemap. Some portions of ocfs2_get_clusters() had to be refactored so that the extent cache can be skipped in favor of going directly to the on-disk records. This makes it easier for us to determine which extent is the last one in the btree. Also, I'm not sure we want to be caching fiemap lookups anyway as they're not directly related to data read/write. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: ocfs2-devel@oss.oracle.com Cc: linux-fsdevel@vger.kernel.org
* [PATCH] ocfs2: Release mutex in error handling codeJulia Lawall2008-07-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* [PATCH] sanitize ->permission() prototypeAl Viro2008-07-26
| | | | | | | | | | | | | | | * kill nameidata * argument; map the 3 bits in ->flags anybody cares about to new MAY_... ones and pass with the mask. * kill redundant gfs2_iop_permission() * sanitize ecryptfs_permission() * fix remaining places where ->permission() instances might barf on new MAY_... found in mask. The obvious next target in that direction is permission(9) folded fix for nfs_permission() breakage from Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* ocfs2: Silence an error message in ocfs2_file_aio_read()Sunil Mushran2008-07-14
| | | | | | | | This patch silences an EINVAL error message in ocfs2_file_aio_read() that is always due to a user error. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Allow uid/gid/perm changes of symlinksSunil Mushran2008-04-30
| | | | | | | | | This patch adds the ability to change attributes of a symlink. Fixes oss bugzilla#963 http://oss.oracle.com/bugzilla/show_bug.cgi?id=963 Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: Convert ocfs2 over to unlocked_ioctlAndi Kleen2008-04-18
| | | | | | | | As far as I can see there is nothing in ocfs2_ioctl that requires the BKL, so use unlocked_ioctl Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
* ocfs2: printf fixesJan Kara2008-01-25
| | | | | | | Explicitely convert loff_t to long long in printf. Just for sure... Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Use generic_file_llseekJan Kara2008-01-25
| | | | | | | | We should use generic_file_llseek() and not default_llseek() so that s_maxbytes gets properly checked when seeking. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH 2/2] ocfs2: cluster aware flock()Mark Fasheh2008-01-25
| | | | | | | | Hook up ocfs2_flock(), using the new flock lock type in dlmglue.c. A new mount option, "localflocks" is added so that users can revert to old functionality as need be. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Rename ocfs2_meta_[un]lockMark Fasheh2008-01-25
| | | | | | | Call this the "inode_lock" now, since it covers both data and meta data. This patch makes no functional changes. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Remove data locksMark Fasheh2008-01-25
| | | | | | | | | | | | | | The meta lock now covers both meta data and data, so this just removes the now-redundant data lock. Combining locks saves us a round of lock mastery per inode and one less lock to ping between nodes during read/write. We don't lose much - since meta locks were always held before a data lock (and at the same level) ordered writeout mode (the default) ensured that flushing for the meta data lock also pushed out data anyways. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: reverse inline-data truncate argsMark Fasheh2007-11-27
| | | | | | | | | | | ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate sets i_size, and punching a hole ignores it. This exposed a problem where punching a hole in an inline-data file wasn't updating the page cache, so fix that too. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Commit journal on sync writesMark Fasheh2007-11-06
| | | | | | | | | We're missing a meta data commit for extending sync writes. In thoery, write could return with the meta data required to read the data uncommitted to disk. Fix that by detecting an allocating write and forcing a journal commit in the sync case. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: convert to new aopsNick Piggin2007-10-16
| | | | | | | | | | | Plug ocfs2 into the ->write_begin and ->write_end aops. A bunch of custom code is now gone - the iovec iteration stuff during write and the ocfs2 splice write actor. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ocfs2: Write support for inline dataMark Fasheh2007-10-12
| | | | | | | | | | | | | | | | | | This fixes up write, truncate, mmap, and RESVSP/UNRESVP to understand inline inode data. For the most part, the changes to the core write code can be relied on to do the heavy lifting. Any code calling ocfs2_write_begin (including shared writeable mmap) can count on it doing the right thing with respect to growing inline data to an extent tree. Size reducing truncates, including UNRESVP can simply zero that portion of the inode block being removed. Size increasing truncatesm, including RESVP have to be a little bit smarter and grow the inode to an extent tree if necessary. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: move nonsparse hole-filling into ocfs2_write_begin()Mark Fasheh2007-10-12
| | | | | | | | | By doing this, we can remove any higher level logic which has to have knowledge of btree functionality - any callers of ocfs2_write_begin() can now expect it to do anything necessary to prepare the inode for new data. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com>
* ocfs2: Allow smaller allocations during large writesMark Fasheh2007-09-20
| | | | | | | | | | | | | | | | | | | | | | | | The ocfs2 write code loops through a page much like the block code, except that ocfs2 allocation units can be any size, including larger than page size. Typically it's equal to or larger than page size - most kernels run 4k pages, the minimum ocfs2 allocation (cluster) size. Some changes introduced during 2.6.23 changed the way writes to pages are handled, and inadvertantly broke support for > 4k page size. Instead of just writing one cluster at a time, we now handle the whole page in one pass. This means that multiple (small) seperate allocations might happen in the same pass. The allocation code howver typically optimizes by getting the maximum which was reserved. This triggered a BUG_ON in the extend code where it'd ask for a single bit (for one part of a > 4k page) and get back more than it asked for. Fix this by providing a variant of the high level allocation function which allows the caller to specify a maximum. The traditional function remains and just calls the new one with a maximum determined from the initial reservation. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Fix calculation of i_blocks during truncateMark Fasheh2007-09-11
| | | | | | | We were setting i_blocks too early - before truncating any allocation. Correct things to set i_blocks after the allocation change. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: check ia_size limits in setattrMark Fasheh2007-08-09
| | | | | | | We have to manually check the requested truncate size as the check in vmtruncate() comes too late for Ocfs2. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Fix some casting errors related to file writesMark Fasheh2007-08-09
| | | | | | | | ocfs2_align_clusters_to_page_index() needs to cast the clusters shift to pgoff_t and ocfs2_file_buffered_write() needs loff_t when calculating destination start for memcpy. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: use s_maxbytes directly in ocfs2_change_file_space()Mark Fasheh2007-08-09
| | | | | | | | There's no need to recalculate things via ocfs2_max_file_offset() as we've already done that to fill s_maxbytes, so use that instead. We can also un-export ocfs2_max_file_offset() then. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Restrict inode changes in ocfs2_update_inode_atime()Mark Fasheh2007-08-09
| | | | | | | | | | | ocfs2_update_inode_atime() calls ocfs2_mark_inode_dirty() to push changes from the struct inode into the ocfs2 disk inode. The problem is, ocfs2_mark_inode_dirty() might change other fields, depending on what happened to the struct inode. Since we don't always have locking to serialize changes to other fields (like i_size, etc), just fix things up to only touch the atime field. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: bad kunmap_atomic()Jens Axboe2007-07-24
| | | | | | | | | kunmap_atomic() takes the virtual address, not the mapped page as argument. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ocfs2: ->fallocate() supportMark Fasheh2007-07-19
| | | | | | | Plug ocfs2 into the ->fallocate() callback. This just re-uses the existing preallocation code. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* arch/i386/* fs/* ipc/*: mark variables with uninitialized_var()Jeff Garzik2007-07-17
| | | | | | | | Mark variables with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ocfs2: Support xfs style space reservation ioctlsMark Fasheh2007-07-10
| | | | | | | | | | | | | | | We re-use the RESVSP/UNRESVSP ioctls from xfs which allow the user to allocate and deallocate regions to a file without zeroing data or changing i_size. Though renamed, the structure passed in from user is identical to struct xfs_flock64. The three fields that are actually used right now are l_whence, l_start and l_len. This should get ocfs2 immediate compatibility with userspace software using the pre-existing xfs ioctls. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: support for removing file regionsMark Fasheh2007-07-10
| | | | | | | | | | Provide an internal interface for the removal of arbitrary file regions. ocfs2_remove_inode_range() takes a byte range within a file and will remove existing extents within that range. Partial clusters will be zeroed so that any read from within the region will return zeros. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: update truncate handling of partial clustersMark Fasheh2007-07-10
| | | | | | | | | The partial cluster zeroing code used during truncate usually assumes that the rightmost byte in the range to be zeroed lies on a cluster boundary. This makes sense for truncate, but punching holes might require zeroing on non-aligned rightmost boundaries. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Support creation of unwritten extentsMark Fasheh2007-07-10
| | | | | | | | | | This can now be trivially supported with re-use of our existing extend code. ocfs2_allocate_unwritten_extents() takes a start offset and a byte length and iterates over the inode, adding extents (marked as unwritten) until len is reached. Existing extents are skipped over. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: support writing of unwritten extentsMark Fasheh2007-07-10
| | | | | | | | | | Update the write code to detect when the user is asking to write to an unwritten extent. Like writing to a hole, we must zero the region between the write and the cluster boundaries. Most of the existing cluster zeroing logic can be re-used with some additional checks for the unwritten flag on extent records. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: shared writeable mmapMark Fasheh2007-07-10
| | | | | | | Implement cluster consistent shared writeable mappings using the ->page_mkwrite() callback. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: rework ocfs2_buffered_write_cluster()Mark Fasheh2007-07-10
| | | | | | | | | | | Use some ideas from the new-aops patch series and turn ocfs2_buffered_write_cluster() into a 2 stage operation with the caller copying data in between. The code now understands multiple cluster writes as a result of having to deal with a full page write for greater than 4k pages. This sets us up to easily call into the write path during ->page_mkwrite(). Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: take ip_alloc_sem during entire truncateMark Fasheh2007-07-10
| | | | | | | Use of the alloc sem during truncate was too narrow - we want to protect the i_size change and page truncation against mmap now. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* pipe: change the ->pin() operation to ->confirm()Jens Axboe2007-07-10
| | | | | | | | | | | | The name 'pin' was badly chosen, it doesn't pin a pipe buffer in the most commonly used sense in the kernel. So change the name to 'confirm', after debating this issue with Hugh Dickins a bit. A good return from ->confirm() means that the buffer is really there, and that the contents are good. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* splice: divorce the splice structure/function definitions from the pipe headerJens Axboe2007-07-10
| | | | | | | | | We need to move even more stuff into the header so that folks can use the splice_to_pipe() implementation instead of open-coding a lot of pipe knowledge (see relay implementation), so move to our own header file finally. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe2007-07-10
| | | | | | | They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* vmsplice: add vmsplice-to-user supportJens Axboe2007-07-10
| | | | | | | | A bit of a cheat, it actually just copies the data to userspace. But this makes the interface nice and symmetric and enables people to build on splice, with room for future improvement in performance. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* splice: abstract out actor dataJens Axboe2007-07-10
| | | | | | | | | | | | For direct splicing (or private splicing), the output may not be a file. So abstract out the handling into a specified actor function and put the data in the splice_desc structure earlier, so we can build on top of that. This is the first step in better splice handling for drivers, and also for implementing vmsplice _to_ user memory. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [PATCH] ocfs2: use generic_segment_checksChristoph Hellwig2007-05-25
| | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: unmap_mapping_range() in ocfs2_truncate()Mark Fasheh2007-05-25
| | | | | | | We weren't calling this before, but since ocfs2 handles the entire truncate operation, we should. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: fix sparse warnings in fs/ocfs2Mark Fasheh2007-05-02
| | | | | | | None of these are actually harmful, but the noise makes looking for real problems difficult. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* [PATCH] fs/ocfs2/: make 3 functions staticAdrian Bunk2007-05-02
| | | | | | | | | | | This patch makes the following needlessly global functions static: - aops.c: ocfs2_write_data_page() - dlmglue.c: ocfs2_dump_meta_lvb_info() - file.c: ocfs2_set_inode_size() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Implement compat_ioctl()Mark Fasheh2007-05-02
| | | | | | We need this to support 32 bit system calls on 64 bit kernels. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Remember rw lock level during direct ioMark Fasheh2007-04-26
| | | | | | | Cluster locking might have been redone because a direct write won't complete, so this needs to be reflected in the iocb. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* ocfs2: Fix up i_blocks calculation to know about holesMark Fasheh2007-04-26
| | | | | | | | Older file systems which didn't support holes did a dumb calculation of i_blocks based on i_size. This is no longer accurate, so fix things up to take actual allocation into account. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 23:35:21 -0500