aboutsummaryrefslogtreecommitdiffstats
path: root/fs/nfsd
Commit message (Collapse)AuthorAge
* [PATCH] r/o bind mounts: check mnt instead of superblock directlyDave Hansen2008-04-19
| | | | | | | | | | | | | | | | | | | If we depend on the inodes for writeability, we will not catch the r/o mounts when implemented. This patches uses __mnt_want_write(). It does not guarantee that the mount will stay writeable after the check. But, this is OK for one of the checks because it is just for a printk(). The other two are probably unnecessary and duplicate existing checks in the VFS. This won't make them better checks than before, but it will make them detect r/o mounts. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: elevate write count for xattr_permission() callersDave Hansen2008-04-19
| | | | | | | | | | | | | | This basically audits the callers of xattr_permission(), which calls permission() and can perform writes to the filesystem. [AV: add missing parts - removexattr() and nfsd posix acls, plug for a leak spotted by Miklos] Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: get write access for vfs_rename() callersDave Hansen2008-04-19
| | | | | | | | | | | This also uses the little helper in the NFS code to make an if() a little bit less ugly. We introduced the helper at the beginning of the series. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: write counts for link/symlinkDave Hansen2008-04-19
| | | | | | | | | [AV: add missing nfsd pieces] Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: get callers of vfs_mknod/create/mkdir()Dave Hansen2008-04-19
| | | | | | | | | | | | | | | | | | | | | | This takes care of all of the direct callers of vfs_mknod(). Since a few of these cases also handle normal file creation as well, this also covers some calls to vfs_create(). So that we don't have to make three mnt_want/drop_write() calls inside of the switch statement, we move some of its logic outside of the switch and into a helper function suggested by Christoph. This also encapsulates a fix for mknod(S_IFREG) that Miklos found. [AV: merged mkdir handling, added missing nfsd pieces] Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: elevate write count for rmdir and unlink.Dave Hansen2008-04-19
| | | | | | | | | | | | | Elevate the write count during the vfs_rmdir() and vfs_unlink(). [AV: merged rmdir and unlink parts, added missing pieces in nfsd] Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] r/o bind mounts: create helper to drop file write accessDave Hansen2008-04-19
| | | | | | | | | | | | | | | | | | | If someone decides to demote a file from r/w to just r/o, they can use this same code as __fput(). NFS does just that, and will use this in the next patch. AV: drop write access in __fput() only after we evict from file list. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: Erez Zadok <ezk@cs.sunysb.edu> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J Bruce Fields" <bfields@fieldses.org> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* nfsd: fix oops on access from high-numbered portsJ. Bruce Fields2008-03-14
| | | | | | | | | | | | | | | | | | | | This bug was always here, but before my commit 6fa02839bf9412e18e77 ("recheck for secure ports in fh_verify"), it could only be triggered by failure of a kmalloc(). After that commit it could be triggered by a client making a request from a non-reserved port for access to an export marked "secure". (Exports are "secure" by default.) The result is a struct svc_export with a reference count one too low, resulting in likely oopses next time the export is accessed. The reference counting here is not straightforward; a later patch will clean up fh_verify(). Thanks to Lukas Hejtmanek for the bug report and followup. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Lukas Hejtmanek <xhejtman@ics.muni.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Wrap buffers used for rpc debug printks into RPC_IFDEBUGPavel Emelyanov2008-02-21
| | | | | | | | | | | | | | | | Sorry for the noise, but here's the v3 of this compilation fix :) There are some places, which declare the char buf[...] on the stack to push it later into dprintk(). Since the dprintk sometimes (if the CONFIG_SYSCTL=n) becomes an empty do { } while (0) stub, these buffers cause gcc to produce appropriate warnings. Wrap these buffers with RPC_IFDEBUG macro, as Trond proposed, to compile them out when not needed. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* d_path: Make d_path() use a struct pathJan Blunck2008-02-15
| | | | | | | | | | | | | | | | d_path() is used on a <dentry,vfsmount> pair. Lets use a struct path to reflect this. [akpm@linux-foundation.org: fix build in mm/memory.c] Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: Bryan Wu <bryan.wu@analog.com> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* d_path: Make seq_path() use a struct path argumentJan Blunck2008-02-15
| | | | | | | | | | | | | seq_path() is always called with a dentry and a vfsmount from a struct path. Make seq_path() take it directly as an argument. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use struct path in struct svc_expkeyJan Blunck2008-02-15
| | | | | | | | | | | | I'm embedding struct path into struct svc_expkey. Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use struct path in struct svc_exportJan Blunck2008-02-15
| | | | | | | | | | | | | | | | | I'm embedding struct path into struct svc_export. [akpm@linux-foundation.org: coding-style fixes] [ezk@cs.sunysb.edu: NFSD: fix wrong mnt_writer count in rename] Signed-off-by: Jan Blunck <jblunck@suse.de> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Introduce path_put()Jan Blunck2008-02-15
| | | | | | | | | | | | | | | | | | | * Add path_put() functions for releasing a reference to the dentry and vfsmount of a struct path in the right order * Switch from path_release(nd) to path_put(&nd->path) * Rename dput_path() to path_put_conditional() [akpm@linux-foundation.org: fix cifs] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: <linux-fsdevel@vger.kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Embed a struct path into struct nameidata instead of nd->{dentry,mnt}Jan Blunck2008-02-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the central patch of a cleanup series. In most cases there is no good reason why someone would want to use a dentry for itself. This series reflects that fact and embeds a struct path into nameidata. Together with the other patches of this series - it enforced the correct order of getting/releasing the reference count on <dentry,vfsmount> pairs - it prepares the VFS for stacking support since it is essential to have a struct path in every place where the stack can be traversed - it reduces the overall code size: without patch series: text data bss dec hex filename 5321639 858418 715768 6895825 6938d1 vmlinux with patch series: text data bss dec hex filename 5320026 858418 715768 6894212 693284 vmlinux This patch: Switch from nd->{dentry,mnt} to nd->path.{dentry,mnt} everywhere. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix cifs] [akpm@linux-foundation.org: fix smack] Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Convert ERR_PTR(PTR_ERR(p)) instances to ERR_CAST(p)David Howells2008-02-07
| | | | | | | | | | Convert instances of ERR_PTR(PTR_ERR(p)) to ERR_CAST(p) using: perl -spi -e 's/ERR_PTR[(]PTR_ERR[(](.*)[)][)]/ERR_CAST(\1)/' `grep -rl 'ERR_PTR[(]*PTR_ERR' fs crypto net security` Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add 64-bit capability support to the kernelAndrew Morgan2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | The patch supports legacy (32-bit) capability userspace, and where possible translates 32-bit capabilities to/from userspace and the VFS to 64-bit kernel space capabilities. If a capability set cannot be compressed into 32-bits for consumption by user space, the system call fails, with -ERANGE. FWIW libcap-2.00 supports this change (and earlier capability formats) http://www.kernel.org/pub/linux/libs/security/linux-privs/kernel-2.6/ [akpm@linux-foundation.org: coding-syle fixes] [akpm@linux-foundation.org: use get_task_comm()] [ezk@cs.sunysb.edu: build fix] [akpm@linux-foundation.org: do not initialise statics to 0 or NULL] [akpm@linux-foundation.org: unused var] [serue@us.ibm.com: export __cap_ symbols] Signed-off-by: Andrew G. Morgan <morgan@kernel.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Serge Hallyn <serue@us.ibm.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Cc: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Erez Zadok <ezk@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* nfsd: more careful input validation in nfsctl write methodsJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | Neil Brown points out that we're checking buf[size-1] in a couple places without first checking whether size is zero. Actually, given the implementation of simple_transaction_get(), buf[-1] is zero, so in both of these cases the subsequent check of the value of buf[size-1] will catch this case. But it seems fragile to depend on that, so add explicit checks for this case. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Acked-by: NeilBrown <neilb@suse.de>
* knfsd: don't bother mapping putrootfh enoent to epermJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | | | | | Neither EPERM and ENOENT map to valid errors for PUTROOTFH according to rfc 3530, and, if anything, ENOENT is likely to be slightly more informative; so don't bother mapping ENOENT to EPERM. (Probably this was originally done because one likely cause was that there is an fsid=0 export but that it isn't permitted to this particular client. Now that we allow WRONGSEC returns, this is somewhat less likely.) In the long term we should work to make this situation less likely, perhaps by turning off nfsv4 service entirely in the absence of the pseudofs root, or constructing a pseudofilesystem root ourselves in the kernel as necessary. Thanks to Benny Halevy <bhalevy@panasas.com> for pointing out this problem. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Benny Halevy <bhalevy@panasas.com>
* svc: Add svc_xprt_names service to replace svc_sock_namesTom Tucker2008-02-01
| | | | | | | | | | | | | Create a transport independent version of the svc_sock_names function. The toclose capability of the svc_sock_names service can be implemented using the svc_xprt_find and svc_xprt_close services. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* knfsd: Support adding transports by writing portlist fileTom Tucker2008-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the write handler for the portlist file to allow creating new listening endpoints on a transport. The general form of the string is: <transport_name><space><port number> For example: echo "tcp 2049" > /proc/fs/nfsd/portlist This is intended to support the creation of a listening endpoint for RDMA transports without adding #ifdef code to the nfssvc.c file. Transports can also be removed as follows: '-'<transport_name><space><port number> For example: echo "-tcp 2049" > /proc/fs/nfsd/portlist Attempting to add a listener with an invalid transport string results in EPROTONOSUPPORT and a perror string of "Protocol not supported". Attempting to remove an non-existent listener (.e.g. bad proto or port) results in ENOTCONN and a perror string of "Transport endpoint is not connected" Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* svc: Make close transport independentTom Tucker2008-02-01
| | | | | | | | | | | | | | | | | | | | Move sk_list and sk_ready to svc_xprt. This involves close because these lists are walked by svcs when closing all their transports. So I combined the moving of these lists to svc_xprt with making close transport independent. The svc_force_sock_close has been changed to svc_close_all and takes a list as an argument. This removes some svc internals knowledge from the svcs. This code races with module removal and transport addition. Thanks to Simon Holm Thøgersen for a compile fix. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
* svc: Change services to use new svc_create_xprt serviceTom Tucker2008-02-01
| | | | | | | | | | Modify the various kernel RPC svcs to use the svc_create_xprt service. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: clean up access_valid, deny_valid checks.J. Bruce Fields2008-02-01
| | | | | | | | | Document these checks a little better and inline, as suggested by Neil Brown (note both functions have two callers). Remove an obviously bogus check while we're there (checking whether unsigned value is negative). Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Neil Brown <neilb@suse.de>
* nfsd: allow root to set uid and gid on createJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | | | | | The server silently ignores attempts to set the uid and gid on create. Based on the comment, this appears to have been done to prevent some overly-clever IRIX client from causing itself problems. Perhaps we should remove that hack completely. For now, at least, it makes sense to allow root (when no_root_squash is set) to set uid and gid. While we're there, since nfsd_create and nfsd_create_v3 share the same logic, pull that out into a separate function. And spell out the individual modifications of ia_valid instead of doing them both at once inside a conditional. Thanks to Roger Willcocks <roger@filmlight.ltd.uk> for the bug report and original patch on which this is based. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: Allow AIX client to read dir containing mountpointsFrank Filz2008-02-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a compatibility issue with a Linux NFS server and AIX NFS client. I have exported /export as fsid=0 with sec=krb5:krb5i I have mount --bind /home onto /export/home I have exported /export/home with sec=krb5i The AIX client mounts / -o sec=krb5:krb5i onto /mnt If I do an ls /mnt, the AIX client gets a permission error. Looking at the network traceIwe see a READDIR looking for attributes FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID. The response gives a NFS4ERR_WRONGSEC which the AIX client is not expecting. Since the AIX client is only asking for an attribute that is an attribute of the parent file system (pseudo root in my example), it seems reasonable that there should not be an error. In discussing this issue with Bruce Fields, I initially proposed ignoring the error in nfsd4_encode_dirent_fattr() if all that was being asked for was FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID, however, Bruce suggested that we avoid calling cross_mnt() if only these attributes are requested. The following patch implements bypassing cross_mnt() if only FATTR4_RDATTR_ERROR and FATTR4_MOUNTED_ON_FILEID are called. Since there is some complexity in the code in nfsd4_encode_fattr(), I didn't want to duplicate code (and introduce a maintenance nightmare), so I added a parameter to nfsd4_encode_fattr() that indicates whether it should ignore cross mounts and simply fill in the attribute using the passed in dentry as opposed to it's parent. Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: fix bad seqid on lock request incompatible with open modeJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | | | The failure to return a stateowner from nfs4_preprocess_seqid_op() means in the case where a lock request is of a type incompatible with an open (due to, e.g., an application attempting a write lock on a file open for read), means that fs/nfsd/nfs4xdr.c:ENCODE_SEQID_OP_TAIL() never bumps the seqid as it should. The client, attempting to close the file afterwards, then gets an (incorrect) bad sequence id error. Worse, this prevents the open file from ever being closed, so we leak state. Thanks to Benny Halevy and Trond Myklebust for analysis, and to Steven Wilton for the report and extensive data-gathering. Cc: Benny Halevy <bhalevy@panasas.com> Cc: Steven Wilton <steven.wilton@team.eftel.com.au> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: recognize callback channel failure earlierJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | | | | | | | When the callback channel fails, we inform the client of that by returning a cb_path_down error the next time it tries to renew its lease. If we wait most of a lease period before deciding that a callback has failed and that the callback channel is down, then we decrease the chances that the client will find out in time to do anything about it. So, mark the channel down as soon as we recognize that an rpc has failed. However, continue trying to recall delegations anyway, in hopes it will come back up. This will prevent more delegations from being given out, and ensure cb_path_down is returned to renew calls earlier, while still making the best effort to deliver recalls of existing delegations. Also fix a couple comments and remove a dprink that doesn't seem likely to be useful. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: miscellaneous nfs4state.c style fixesJ. Bruce Fields2008-02-01
| | | | | | Fix various minor style violations. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: make current_clientid localJ. Bruce Fields2008-02-01
| | | | | | | Declare this variable in the one function where it's used, and clean up some minor style problems. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: fix encode_entryplus_baggage() indentationJ. Bruce Fields2008-02-01
| | | | | | Fix bizarre indentation. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: kill unneeded cl_confirm checkJ. Bruce Fields2008-02-01
| | | | | | | | | We generate a unique cl_confirm for every new client; so if we've already checked that this cl_confirm agrees with the cl_confirm of unconf, then we already know that it does not agree with the cl_confirm of conf. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: remove unnecessary cl_verifier check from setclientid_confirmJ. Bruce Fields2008-02-01
| | | | | | | | Again, the only way conf and unconf can have the same clientid is if they were created in the "probable callback update" case of setclientid, in which case we already know that the cl_verifier fields must agree. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: kill unnecessary same_name() in setclientid_confirmJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | If conf and unconf are both found in the lookup by cl_clientid, then they share the same cl_clientid. We always create a unique new cl_clientid field when creating a new client--the only exception is the "probable callback update" case in setclientid, where we copy the old cl_clientid from another clientid with the same name. Therefore two clients with the same cl_client field also always share the same cl_name field, and a couple of the checks here are redundant. Thanks to Simon Holm Thøgersen for a compile fix. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Cc: Simon Holm Thøgersen <odie@cs.aau.dk>
* nfsd: uniquify cl_confirm valuesJ. Bruce Fields2008-02-01
| | | | | | | Using a counter instead of the nanoseconds value seems more likely to produce a unique cl_confirm. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: eliminate final bogus case from setclientid logicJ. Bruce Fields2008-02-01
| | | | | | | We're supposed to generate a different cl_confirm verifier for each new client, so these to cl_confirm values should never be the same. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd4: kill some unneeded setclientid commentsJ. Bruce Fields2008-02-01
| | | | | | | | | | Most of these comments just summarize the code. The matching of code to the cases described in the RFC may still be useful, though; add specific section references to make that easier to follow. Also update references to the outdated RFC 3010. Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: minor fs/nfsd/auth.h cleanupJ. Bruce Fields2008-02-01
| | | | | | | | While we're here, let's remove the redundant (and now wrong) pathname in the comment, and the #ifdef __KERNEL__'s. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: move nfsd/auth.h into fs/nfsdJ. Bruce Fields2008-02-01
| | | | | | | | | | This header is used only in a few places in fs/nfsd, so there seems to be little point to having it in include/. (Thanks to Robert Day for pointing this out.) Cc: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* knfsd: allow cache_register to return error on failureJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | Newer server features such as nfsv4 and gss depend on proc to work, so a failure to initialize the proc files they need should be treated as fatal. Thanks to Andrew Morton for style fix and compile fix in case where CONFIG_NFSD_V4 is undefined. Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: fail init on /proc/fs/nfs/exports creation failureJ. Bruce Fields2008-02-01
| | | | | | | | | | | I assume the reason failure of creation was ignored here was just to continue support embedded systems that want nfsd but not proc. However, in cases where proc is supported it would be clearer to fail entirely than to come up with some features disabled. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* knfsd: cache unregistration needn't return errorJ. Bruce Fields2008-02-01
| | | | | | | | | | There's really nothing much the caller can do if cache unregistration fails. And indeed, all any caller does in this case is print an error and continue. So just return void and move the printk's inside cache_unregister. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: fail module init on reply cache init failureJ. Bruce Fields2008-02-01
| | | | | | | | | | | | | | | | | | If the reply cache initialization fails due to a kmalloc failure, currently we try to soldier on with a reduced (or nonexistant) reply cache. Better to just fail immediately: the failure is then much easier to understand and debug, and it could save us complexity in some later code. (But actually, it doesn't help currently because the cache is also turned off in some odd failure cases; we should probably find a better way to handle those failure cases some day.) Fix some minor style problems while we're at it, and rename nfsd_cache_init() to remove the need for a comment describing it. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: cleanup nfsd module initialization cleanupJ. Bruce Fields2008-02-01
| | | | | | | | | | | Handle the failure case here with something closer to the standard kernel style. Doesn't really matter for now, but I'd like to add a few more failure cases, and then this'll help. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* knfsd: cleanup nfsd4 properly on module init failureJ. Bruce Fields2008-02-01
| | | | | | | We forgot to shut down the nfs4 state and idmapping code in this case. Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* nfsd: Fix handling of negative lengths in read_buf()J. Bruce Fields2008-02-01
| | | | | | | | | | | | The length "nbytes" passed into read_buf should never be negative, but we check only for too-large values of "nbytes", not for too-small values. Make nbytes unsigned, so it's clear that the former tests are sufficient. (Despite this read_buf() currently correctly returns an xdr error in the case of a negative length, thanks to an unsigned comparison with size_of() and bounds-checking in kmalloc(). This seems very fragile, though.) Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NFSD: Fix mixed sign comparison in nfs3svc_decode_symlinkargsChuck Lever2008-02-01
| | | | | | Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-By: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NFSD: Use unsigned length argument for decode_pathnameChuck Lever2008-02-01
| | | | | | | | | Clean up: path name lengths are unsigned on the wire, negative lengths are not meaningful natively either. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-By: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NFSD: Adjust filename length argument of nfsd_lookupChuck Lever2008-02-01
| | | | | | | | | | Clean up: adjust the sign of the length argument of nfsd_lookup and nfsd_lookup_dentry, for consistency with recent changes. NFSD version 4 callers already pass an unsigned file name length. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-By: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* NFSD: Use unsigned length argument for decode_filenameChuck Lever2008-02-01
| | | | | | | | | Clean up: file name lengths are unsigned on the wire, negative lengths are not meaningful natively either. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-By: NeilBrown <neilb@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 23:23:00 -0500