aboutsummaryrefslogtreecommitdiffstats
path: root/fs/jffs2
Commit message (Collapse)AuthorAge
* [PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o2006-09-27
| | | | | | | | | | | | | | | | This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fs: Conversions from kmalloc+memset to k(z|c)allocPanagiotis Issaris2006-09-27
| | | | | | | | | Conversions from kmalloc+memset to kzalloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Jffs2-bit-acked-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [JFFS2] Remove unneeded ifdefs from jffs2_fs_i.hMichal Piotrowski2006-09-22
| | | | | | | | | | | We certainly don't need the check for Linux version > 2.5.2, and in fact we can also live without the __ECOS check, since we can just add it back in the eCos git tree which is automatically derived from the Linux fs/jffs2 subdirectory in the upstream git tree. Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* [JFFS2][SUMMARY] Fix a summary collecting bug.Havasi Ferenc2006-09-16
| | | | | | | | | | | | | | | | In some special case (padding because of sync or umount) it can be possible that summary information is not fit to the end of the erase block. In these cases the collecting of summary is disabled for this erase block. The problem was that this was not respected by jffs2_sum_add_kvec(). This patch fix this bug. From: Zoltan Sogor <weth@inf.u-szeged.hu> Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* fs/jffs2/xattr.c: remove dead codeAdrian Bunk2006-08-15
| | | | | | | | This patch removes some obvious dead code spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* make fs/jffs2/nodelist.c:jffs2_obsolete_node_frag() staticAdrian Bunk2006-07-06
| | | | | | | | This patch makes the needlessly global jffs2_obsolete_node_frag() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2006-07-04
|\ | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: [JFFS2][XATTR] Fix memory leak in POSIX-ACL support fs/jffs2/: make 2 functions static [MTD] NAND: Fix broken sharpsl driver [JFFS2][XATTR] Fix xd->refcnt race condition MTD: kernel-doc fixes + additions MTD: fix all kernel-doc warnings [MTD] DOC: Fixup read functions and do a little cleanup
| * [JFFS2][XATTR] Fix memory leak in POSIX-ACL supportKaiGai Kohei2006-07-02
| | | | | | | | | | | | | | | | | | | | | | | | jffs2_clear_acl() which releases acl caches allocated by kmalloc() was defined but it was never called. Thus, we faced to the risk of memory leaking. This patch plugs jffs2_clear_acl() into jffs2_do_clear_inode(). It ensures to release acl cache when inode is cleared. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * fs/jffs2/: make 2 functions staticAdrian Bunk2006-06-29
| | | | | | | | | | | | | | This patch makes two needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] Fix xd->refcnt race conditionKaiGai Kohei2006-06-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When xd->refcnt is checked whether this xdatum should be released or not, atomic_dec_and_lock() is used to ensure holding the c->erase_completion_lock. This fix change a specification of delete_xattr_datum(). Previously, it's only called when xd->refcnt equals zero. (calling it with positive xd->refcnt cause a BUG()) If you applied this patch, the function checks whether xd->refcnt is zero or not under the spinlock if necessary. Then, it marks xd DEAD flahs and links with xattr_dead_list or releases it immediately when xd->refcnt become zero. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | Remove obsolete #include <linux/config.h>Jörn Engel2006-06-30
| | | | | | | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* | [PATCH] mark address_space_operations constChristoph Hellwig2006-06-28
|/ | | | | | | | | | Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.infradead.org/mtd-2.6Linus Torvalds2006-06-27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: [MTD] NAND: Select chip before checking write protect status [MTD] CORE mtdchar.c: fix off-by-one error in lseek() [MTD] NAND: Fix typo in mtd/nand/ts7250.c [JFFS2][XATTR] coexistence between xattr and write buffering support. [JFFS2][XATTR] Fix wrong copyright [JFFS2][XATTR] Re-define xd->refcnt as atomic_t [JFFS2][XATTR] Fix memory leak with jffs2_xattr_ref [JFFS2][XATTR] rid unnecessary writing of delete marker. [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL. [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletion [MTD] Fix off-by-one error in physmap.c [MTD] Remove unused 'nr_banks' variable from ixp2000 map driver [MTD NAND] s3c2412 support in s3c2410.c [MTD] Initialize 'writesize' [MTD] NAND: ndfc fix address offset thinko [MTD] NAND: S3C2410 convert prinks to dev_*()s [MTD] NAND: Missing fixups
| * [JFFS2][XATTR] Fix wrong copyrightKaiGai Kohei2006-06-27
| | | | | | | | | | | | | | summary.c was modified at 2006. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] Re-define xd->refcnt as atomic_tKaiGai Kohei2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In jffs2_release_xattr_datum(), it refers xd->refcnt to ensure whether releasing xd is allowed or not. But we can't hold xattr_sem since this function is called under spin_lock(&c->erase_completion_lock). Thus we have to refer it without any locking. This patch redefine xd->refcnt as atomic_t. It enables to refer xd->refcnt without any locking. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] Fix memory leak with jffs2_xattr_refKaiGai Kohei2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | If xattr_ref is associated with an orphan inode_cache on filesystem mounting, those xattr_refs are not released even if this inode_cache is released. This patch enables to call jffs2_xattr_delete_inode() for such a irregular inode_cachde too. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] rid unnecessary writing of delete marker.KaiGai Kohei2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the followinf situation, an explicit delete marker is not necessary, because we can certainlly detect those obsolete xattr_datum or xattr_ref on next mounting. - When to delete xattr_datum node. - When to delete xattr_ref node on removing inode. - When to delete xattr_ref node on updating xattr. This patch rids writing delete marker in those situations. Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] Fix ACL bug when updating null xattr by null ACL.KaiGai Kohei2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch enable to handle the case when updating null xattr by null ACL. When we try to set NULL into NULL xattr, xattr subsystem returns -ENODATA. This patch enables to handle this error code. [2/3] jffs2-xattr-v6-02-fix_posixacl_bug.patch Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
| * [JFFS2][XATTR] using 'delete marker' for xdatum/xref deletionKaiGai Kohei2006-06-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - When xdatum is removed, a new xdatum with 'delete marker' is written. (version==0xffffffff means 'delete marker') - When xref is removed, a new xref with 'delete marker' is written. (odd-numbered xseqno means 'delete marker') - delete_xattr_(datum/xref)_delay() are new deletion functions are added. We can only use them if we can detect the target obsolete xdatum/xref as a orphan or errir one. (e.g when inode deletion, or detecting crc error) [1/3] jffs2-xattr-v6-01-delete_marker.patch Signed-off-by: KaiGai Kohei <kaigai@ak.jp.nec.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2006-06-26
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
| * | spelling fixesAndreas Mohr2006-06-26
| |/ | | | | | | | | | | | | | | | | | | | | | | acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* / [PATCH] fs: use list_move()Akinobu Mita2006-06-26
|/ | | | | | | | | | | | | | | | This patch converts the combination of list_del(A) and list_add(A, B) to list_move(A, B) under fs/. Cc: Ian Kent <raven@themaw.net> Acked-by: Joel Becker <joel.becker@oracle.com> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Hans Reiser <reiserfs-dev@namesys.com> Cc: Urban Widmark <urban@teststation.com> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Akinobu Mita <mita@miraclelinux.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] VFS: Permit filesystem to perform statfs with a known root dentryDavid Howells2006-06-23
| | | | | | | | | | | | | | | | | | | | | Give the statfs superblock operation a dentry pointer rather than a superblock pointer. This complements the get_sb() patch. That reduced the significance of sb->s_root, allowing NFS to place a fake root there. However, NFS does require a dentry to use as a target for the statfs operation. This permits the root in the vfsmount to be used instead. linux/mount.h has been added where necessary to make allyesconfig build successfully. Interest has also been expressed for use with the FUSE and XFS filesystems. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] VFS: Permit filesystem to override root dentry on mountDavid Howells2006-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.infradead.org/~dwmw2/rbtree-2.6Linus Torvalds2006-06-20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/~dwmw2/rbtree-2.6: [RBTREE] Switch rb_colour() et al to en_US spelling of 'color' for consistency Update UML kernel/physmem.c to use rb_parent() accessor macro [RBTREE] Update hrtimers to use rb_parent() accessor macro. [RBTREE] Add explicit alignment to sizeof(long) for struct rb_node. [RBTREE] Merge colour and parent fields of struct rb_node. [RBTREE] Remove dead code in rb_erase() [RBTREE] Update JFFS2 to use rb_parent() accessor macro. [RBTREE] Update eventpoll.c to use rb_parent() accessor macro. [RBTREE] Update key.c to use rb_parent() accessor macro. [RBTREE] Update ext3 to use rb_parent() accessor macro. [RBTREE] Change rbtree off-tree marking in I/O schedulers. [RBTREE] Add accessor macros for colour and parent fields of rb_node
| * [RBTREE] Update JFFS2 to use rb_parent() accessor macro.David Woodhouse2006-04-21
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Check CRC32 on dirent and data nodes each time they're readDavid Woodhouse2006-06-18
| | | | | | | | | | | | | | Also, make sure dirents are marked REF_UNCHECKED when we 'discover' them through eraseblock summary. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] When retiring nextblock, allocate a node_ref for the wasted spaceDavid Woodhouse2006-06-18
| | | | | | | | | | | | | | Failing to do so makes the calculated length of the last node incorrect, when we're not using eraseblock summaries. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Don't trust node headers before the CRC is checked.David Woodhouse2006-06-17
| | | | | | | | | | | | | | | | | | Especially when summary code is used, we can have in-memory data structures referencing certain nodes without them actually being readable on the flash. Discard the nodes gracefully in that case, rather than triggering a BUG(). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix more breakage caused by janitorial meddling.David Woodhouse2006-06-09
| | | | | | | | | | | | | | jffs2_zlib_exit() and free_workspaces() shouldn't be marked __exit because they get called in the error case from the init functions. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Remove stray __exit from jffs2_compressors_exit()David Woodhouse2006-06-02
| | | | | | | | | | | | | | | | | | | | | | | | It's used from the initfunc in case of failure too. We could actually do with an '__initexit' for this kind of thing -- when built in to the kernel, it could do with being dropped with the init text. We _could_ actually just use __init for it, but that would break if/when we start dropping init text from modules. So let's just leave it as it was for now, and mutter a little more about random 'janitorial' fixes from people who aren't paying attention to what they're doing. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Preallocate node refs for cleanmarker in summary scanDavid Woodhouse2006-05-30
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix calculation of potential summary marker offset on NOR flash.David Woodhouse2006-05-30
| | | | | | | | | | | | | | Helps if we look _inside_ the buffer, rather than adding jeb->offset to it. Doh. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [MTD] NAND Signal that a bitflip was corrected by ECCThomas Gleixner2006-05-29
| | | | | | | | | | | | | | | | Return -EUCLEAN on read when a bitflip was detected and corrected, so the clients can react and eventually copy the affected block to a spare one. Make all in kernel users aware of the change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | [MTD] Rework the out of band handling completelyThomas Gleixner2006-05-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | [MTD] NAND Replace oobinfo by ecclayoutThomas Gleixner2006-05-29
| | | | | | | | | | | | | | | | | | The nand_oobinfo structure is not fitting the newer error correction demands anymore. Replace it by struct nand_ecclayout and fixup the users all over the place. Keep the nand_oobinfo based ioctl for user space compability reasons. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | [MTD] NAND Consolidate oobinfo handlingThomas Gleixner2006-05-29
| | | | | | | | | | | | | | | | | | The info structure for out of band data was copied into the mtd structure. Make it a pointer and remove the ability to set it from userspace. The position of ecc bytes is defined by the hardware and should not be changed by software. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | [JFFS2] Preallocate raw_node_refs in a couple of missing places in scanDavid Woodhouse2006-05-28
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix oops when marking space dirty in scan, but no previous node exists.David Woodhouse2006-05-28
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix wbuf recovery of f->metadata->raw node.David Woodhouse2006-05-27
| | | | | | | | | | | | A data node might not be in the fraglist; it could be f->metadata. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Switch to using an array of jffs2_raw_node_refs instead of a list.David Woodhouse2006-05-26
| | | | | | | | | | | | | | | | This allows us to drop another pointer from the struct jffs2_raw_node_ref, shrinking it to 8 bytes on 32-bit machines (if the TEST_TOTLEN) paranoia check is turned off, which will be committed soon). Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix 64-bit size_t problems in XATTR code.David Woodhouse2006-05-25
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Fix and improve debugging output during scan.David Woodhouse2006-05-24
| | | | | | | | | | | | | | Print wasted_size in scanned eraseblocks, print range correctly for summary dirent and inode entries. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Add 'jeb' argument to jffs2_prealloc_raw_node_refs()David Woodhouse2006-05-24
| | | | | | | | | | | | | | Preallocation of refs is shortly going to be a per-eraseblock thing, rather than per-filesystem. Add the required argument to the function. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Correctly handle wasted space before summary node.David Woodhouse2006-05-24
| | | | | | | | Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] jffs2_free_all_node_refs() doesn't free them all. Rename it.David Woodhouse2006-05-24
| | | | | | | | | | | | ... to jffs2_free_jeb_node_refs() since that's what it does. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Allocate node_ref for wasted space when skipping to page boundaryDavid Woodhouse2006-05-24
| | | | | | | | | | | | | | One more place where we were changing the accounting info without actually allocating a ref for the lost space... Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | [JFFS2] Revert Artem's Bunkage in debug messages.David Woodhouse2006-05-24
| | | | | | | | | | | | | | | | | | | | | | | | Random unthinking 'cleanup' caused debug messages like this: Obsoleting node at 0x0006daf4 of len 0x3a4: <7>Dirtying If messages are continuation of an existing line, they don't need to be prefixed with KERN_DEBUG. THINK. Or you will be replaced by a small shell script. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* | Merge branch 'master' of git://git.infradead.org/~gleixner/mtd-nand-2.6.gitDavid Woodhouse2006-05-24
|\ \
| * | [MTD] Remove read/write _ecc variantsThomas Gleixner2006-05-23
| | | | | | | | | | | | | | | | | | | | | MTD clients are agnostic of FLASH which needs ECC suppport. Remove the functions and fixup the callers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>