aboutsummaryrefslogtreecommitdiffstats
path: root/fs/gfs2
Commit message (Collapse)AuthorAge
* [GFS2] fix gfs2 block allocation (cleaned up)Benjamin Marzinski2008-06-24
| | | | | | | | | | | | | | | | | | | | This patch fixes bz 450641. This patch changes the computation for zero_metapath_length(), which it renames to metapath_branch_start(). When you are extending the metadata tree, The indirect blocks that point to the new data block must either diverge from the existing tree either at the inode, or at the first indirect block. They can diverge at the first indirect block because the inode has room for 483 pointers while the indirect blocks have room for 509 pointers, so when the tree is grown, there is some free space in the first indirect block. What metapath_branch_start() now computes is the height where the first indirect block for the new data block is located. It can either be 1 (if the indirect block diverges from the inode) or 2 (if it diverges from the first indirect block). Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] BUG: unable to handle kernel paging request at ffff81002690e000Bob Peterson2008-06-24
| | | | | | | | This patch fixes bugzilla bug bz448866: gfs2: BUG: unable to handle kernel paging request at ffff81002690e000. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Prefer strlcpy() over snprintf()Jean Delvare2008-05-12
| | | | | | | strlcpy is faster than snprintf when you don't use the returned value. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Fix cast from unsigned int to s64Andrew Price2008-05-12
| | | | | | | | | | This fixes bz 444829 where allocating a new block caused gfs2 file systems to report 0 bytes used in df. It was caused by a broken cast from an unsigned int in gfs2_block_alloc() to a negative s64 in gfs2_statfs_change(). This patch casts the unsigned int to an s64 before the unary minus is applied. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] filesystem consistency error from do_stripBob Peterson2008-05-12
| | | | | | | | | | | | This patch fixes a GFS2 filesystem consistency error reported from function do_strip. The problem was caused by a timing window that allowed two vfs inodes to be created in memory that point to the same file. The problem is fixed by making the vfs's iget_test, iget_set mechanism check and set a new bit in the in-core gfs2_inode structure while the vfs inode spin_lock is held. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* fs: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-30
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: remove nopageNick Piggin2008-04-28
| | | | | | | | | | Nothing in the tree uses nopage any more. Remove support for it in the core mm code and documentation (and a few stray references to it in comments). Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dlm: move plock code from gfs2David Teigland2008-04-21
| | | | | | | Move the code that handles cluster posix locks from gfs2 into the dlm so that it can be used by both gfs2 and ocfs2. Signed-off-by: David Teigland <teigland@redhat.com>
* [GFS2] fix assertion in log_refund()Roel Kluin2008-04-18
| | | | | | | since unsigned, unused >= 0 is always true. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] fix GFP_KERNEL misusesJosef Bacik2008-04-10
| | | | | | | | | | | There are several places where GFP_KERNEL allocations happen under a glock, which will result in hangs if we're under memory pressure and go to re-enter the fs in order to flush stuff out. This patch changes the culprits to GFS_NOFS to keep this problem from happening. Thank you, Signed-off-by: Josef Bacik <jbacik@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] test for IS_ERR rather than 0Julia Lawall2008-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function gfs2_inode_lookup always returns either a valid pointer or a value made with ERR_PTR, so its result should be tested with IS_ERR, not with a test for 0. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) //<smpl> @a@ expression E, E1; statement S,S1; position p; @@ E = gfs2_inode_lookup(...) ... when != E = E1 if@p (E) S else S1 @n@ position a.p; expression E,E1; statement S,S1; @@ E = NULL ... when != E = E1 if@p (E) S else S1 @depends on !n@ expression E; statement S,S1; position a.p; @@ * if@p (E) S else S1 //</smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Invalidate cache at correct pointBenjamin Marzinski2008-03-31
| | | | | | | | | | | | | | | | GFS2 wasn't invalidating its cache before it called into the lock manager with a request that could potentially drop a lock. This was leaving a window where the lock could be actually be held by another node, but the file's page cache would still appear valid, causing coherency problems. This patch moves the cache invalidation to before the lock manager call when dropping a lock. It also adds the option to the lock_dlm lock manager to not use conversion mode deadlock avoidance, which, on a conversion from shared to exclusive, could internally drop the lock, and then reacquire in. GFS2 now asks lock_dlm to not do this. Instead, GFS2 manually drops the lock and reacquires it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] fs/gfs2/recovery.c: suppress warningsakpm@linux-foundation.org2008-03-31
| | | | | | | | | | | | | | fs/gfs2/recovery.c: In function 'get_log_header': fs/gfs2/recovery.c:152: warning: 'lh.lh_sequence' may be used uninitialized in this function fs/gfs2/recovery.c:152: warning: 'lh.lh_flags' may be used uninitialized in this function fs/gfs2/recovery.c:152: warning: 'lh.lh_tail' may be used uninitialized in this function fs/gfs2/recovery.c:152: warning: 'lh.lh_blkno' may be used uninitialized in this function fs/gfs2/recovery.c:152: warning: 'lh.lh_hash' may be used uninitialized in this function Cc: David Teigland <teigland@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Faster gfs2_bitfit algorithmBob Peterson2008-03-31
| | | | | | | | | | | | This version of the gfs2_bitfit algorithm includes the latest suggestions from Steve Whitehouse. It is typically eight to ten times faster than the version we're using today. If there is a lot of metadata mixed in (lots of small files) the algorithm is often 15 times faster, and given the right conditions, I've seen peaks of 20 times faster. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Streamline quota lock/check for no-quota caseSteven Whitehouse2008-03-31
| | | | | | | | | | | | This patch streamlines the quota checking in the "no quota" case by making the check inline in the calling function, thus reducing the number of function calls. Eventually we might be able to remove the checks from the gfs2_quota_lock() and gfs2_quota_check() functions, but currently we can't as there are a very few places in the code which need to call these functions directly still. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Abhijith Das <adas@redhat.com>
* [GFS2] Remove drop of module ref where not neededSteven Whitehouse2008-03-31
| | | | | | | | | In an earlier patch "[GFS2] fix file_system_type leak on gfs2meta mount" we removed the code to grab a ref to the module which was not needed (since we know that the module cannot be unloaded at that time) so this patch removes the code to drop that reference. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] gfs2_adjust_quota has broken unstuffing codeAbhijith Das2008-03-31
| | | | | | | | | This patch combines the 2 patches in bug 434736 to correct the lock ordering in the unstuffing of the quota inode in gfs2_adjust_quota and adjusting the number of revokes in gfs2_write_jdata_pagevec Signed-off-by: Abhijith Das <adas@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] possible null pointer dereference fixupCyrill Gorcunov2008-03-31
| | | | | | | | gfs2_alloc_get may fail so we have to check it to prevent NULL pointer dereference. Signed-off-by: Cyrill Gorcunov <gorcunov@gamil.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Need to ensure that sector_t is 64bits for GFS2Steven Whitehouse2008-03-31
| | | | | | | We need to ensure that sector_t is 64bits for GFS2, so that we need to depend on LBD as well as LSF. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] re-support special inodeDenis Cheng2008-03-31
| | | | | | | | | | | | | | | | | | a previous commit removed call to init_special_inode from inode lookuping, this cause problems as: # mknod /mnt/gfs2/dev/null c 1 3 # cat /mnt/gfs2/dev/null cat: /mnt/gfs2/dev/null: Invalid argument without special inode, GFS2 cannot support char device file, block device file, fifo pipe, and socket file, lose many important features as a common file system. this one line patch re add special inode support. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] remove gfs2_dev_iopsDenis Cheng2008-03-31
| | | | | | | | | | struct inode_operations gfs2_dev_iops is always the same as gfs2_file_iops, since Jan 2006, when GFS2 merged into mainstream kernel. So one of them could be removed. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] fix file_system_type leak on gfs2meta mountChristoph Hellwig2008-03-31
| | | | | | | | | | | get_gfs2_sb does a get_fs_type without doing a put_filesystem and thus leaking a file_system_type reference everytime it's called. Just use gfs2_fs_type directly instead of doing the lookup and thus fix the problem. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Allow bmap to allocate extentsSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | We've supported mapping of extents when no block allocation is required for some time. This patch extends that to mapping of extents when an allocation has been requested. In that case we try to allocate as many blocks as are requested, but we might return fewer in case there is something preventing us from returning the complete amount (e.g. an already allocated block is in the way). Currently the only code path which can actually request multiple data blocks in a single bmap call is the page_mkwrite path and even then it only happens if there are multiple blocks per page. What this patch does do however, is merge the allocation requests for metadata (growing the metadata tree in either height or depth) with the allocation of the data blocks in the case that both are needed. This results in lower overheads even in the single block allocation case. The one thing which we can't handle here at the moment is unstuffing. I would like to be able to do that, but the problem which arises is that in order to unstuff one has to get a locked page from the page cache which results in locking problems in the (usual) case that the caller is holding the page lock on the page it wishes to map. So that case will have to be addressed in future patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Fix a page lock / glock deadlockSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | | | | We've previously been using a "try lock" in readpage on the basis that it would prevent deadlocks due to the inverted lock ordering (our normal lock ordering is glock first and then page lock). Unfortunately tests have shown that this isn't enough. If the glock has a demote request queued such that run_queue() in the glock code tries to do a demote when its called under readpage then it will try and write out all the dirty pages which requires locking them. This then deadlocks with the page locked by readpage. The solution is to always require two calls into readpage. The first unlocks the page, gets the glock and returns AOP_TRUNCATED_PAGE, the second does the actual readpage and unlocks the glock & page as required. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] proper extern for gfs2/locking/dlm/mount.c:gdlm_opsAdrian Bunk2008-03-31
| | | | | | | | This patch adds a proper extern declaration for gdlm_ops in fs/gfs2/locking/dlm/lock_dlm.h Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] gfs2/ops_file.c should #include "ops_inode.h"Adrian Bunk2008-03-31
| | | | | | | | Every file should include the headers containing the prototypes for its global functions (in this case for gfs2_set_inode_flags()). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] be*_add_cpu conversionMarcin Slusarz2008-03-31
| | | | | | | | | | | | replace all: big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) + expression_in_cpu_byteorder); with: beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Fix bug where we called drop_bh incorrectlySteven Whitehouse2008-03-31
| | | | | | | | | | As a result of an earlier patch, drop_bh was being called in cases when it shouldn't have been. Since we never have a gh in the drop case and we always have a gh in the promote case, we can use that extra information to tell which case has been seen. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com>
* [GFS2] Get inode buffer only once per block map callSteven Whitehouse2008-03-31
| | | | | | | | | | | In the case that we needed to grow the height of the metadata tree we were looking up the inode buffer and then brelse()ing it despite the fact that it is needed later in the block map process. This patch ensures that we look up the inode's buffer once and only once during the block map process. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Eliminate (almost) duplicate field from gfs2_inodeSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | | | | | The blocks counter is almost a duplicate of the i_blocks field in the VFS inode. The only difference is that i_blocks can be only 32bits long for 32bit arch without large single file support. Since GFS2 doesn't handle the non-large single file case (for 32 bit anyway) this adds a new config dependency on 64BIT || LSF. This has always been the case, however we've never explicitly said so before. Even if we do add support for the non-LSF case, we will still not require this field to be duplicated since we will not be able to access oversized files anyway. So the net result of all this is that we shave 8 bytes from a gfs2_inode and get our config deps correct. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Add a function to interate over an extentSteven Whitehouse2008-03-31
| | | | | | | | | | | | | This adds a function (currently the only use is during mapping of already allocated blocks, but watch this space) which iterates over a number of pointers in a block and returns the extent length. If the initial pointer is 0 (i.e. unallocated) it will return the number of unallocated blocks in the extent. If the initial pointer is allocated, then it returns the number of contiguously allocated blocks in the extent. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] The case of the missing asteriskSteven Whitehouse2008-03-31
| | | | | | A dereference was forgotten. This adds it back correctly. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Add extent allocation to block allocatorSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | Rather than having to allocate a single block at a time, this patch allows the block allocator to allocate an extent. Since there is no difference (so far as the block allocator is concerned) between data blocks and indirect blocks, it is posible to allocate a single extent and for the caller to unrevoke just the blocks required for indirect blocks. Currently the only bit of GFS2 to make use of this feature is the build height function. The intention is that gfs2_block_map will be changed to make use of this feature in future patches. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Merge gfs2_alloc_meta and gfs2_alloc_dataSteven Whitehouse2008-03-31
| | | | | | | | | Thanks to the preceeding patches, the only difference between these two functions is their name. We can thus merge them and call the new function gfs2_alloc_block to reflect the fact that it can allocate either kind of block. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Update gfs2_trans_add_unrevoke to accept extentsSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | | By adding an extra argument to gfs2_trans_add_unrevoke we can now specify an extent length of blocks to unrevoke. This means that we only need to make one pass through the list for each extent rather than each block. Currently the only extent length which is used is 1, but that will change in the future. Also gfs2_trans_add_unrevoke is removed from gfs2_alloc_meta since its the only difference between this and gfs2_alloc_data which is left. This will allow a future patch to merge these two functions into one (i.e. one call to allocate both data and metadata in a single extent in the future). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Merge the rd_last_alloc_meta and rd_last_alloc_data fieldsSteven Whitehouse2008-03-31
| | | | | | | | | We don't need to keep track of when we last allocated data and metadata separately since the only thing thats important when searching for a free block is whether its free or not, which is independent from what type of block it is. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Reduce inode size by merging fieldsSteven Whitehouse2008-03-31
| | | | | | | | | | There were three fields being used to keep track of the location of the most recently allocated block for each inode. These have been merged into a single field in order to better keep the data and metadata for an inode close on disk, and also to reduce the space required for storage. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Remove unused countersBob Peterson2008-03-31
| | | | | | | | This is kind of trivial in the greater scheme of things, but this removes three counters that AFAICT are never used. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Shrink & rename di_depthSteven Whitehouse2008-03-31
| | | | | | | | | | | This patch forms a pair with the previous patch which shrunk di_height. Like that patch di_depth is renamed i_depth and moved into struct gfs2_inode directly. Also the field goes from 16 bits to 8 bits since it is also limited to a max value which is rather small (17 in this case). In addition we also now validate the field against this maximum value when its read in. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Remove rgrp and glock version numbersBob Peterson2008-03-31
| | | | | | | | | This patch further reduces GFS2's memory requirements by eliminating the 64-bit version number fields in lieu of a couple bits. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Remove lm.[ch] and distribute contentSteven Whitehouse2008-03-31
| | | | | | | | | | | | | | | | | The functions in lm.c were just wrappers which were mostly only used in one other file. By moving the functions to the files where they are being used, they can be marked static and also this will usually result in them being inlined since they are often only used from one point in the code. A couple of really trivial functions have been inlined by hand into the function which called them as it makes the code clearer to do that. We also gain from one fewer function call in the glock lock and unlock paths. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Eliminate gl_req_bhBob Peterson2008-03-31
| | | | | | | | This patch further reduces the memory needs of GFS2 by eliminating the gl_req_bh variable from struct gfs2_glock. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Add consts to various bits of rgrp.cSteven Whitehouse2008-03-31
| | | | | | | | There are a couple of routines which scan bitmaps where we can mark the bitmaps const, plus a couple of call sites that can be updated too. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Introduce array of buffers to struct metapathSteven Whitehouse2008-03-31
| | | | | | | | | | | | | The reason for doing this is to allow all the block mapping code to share the same array. As a result we can remove two arguments from lookup_metapath since they are now returned via the array. We also add a function to drop all refs to buffer heads when we are done with the metapath. The build_height function shares the struct metapath, but currently still frees its own buffers, and this will change in a future patch. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Move part of gfs2_block_map into a separate functionSteven Whitehouse2008-03-31
| | | | | | | This is required to enable future changes to the block mapping code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Get rid of gl_waiters2Bob Peterson2008-03-31
| | | | | | | | This patch reduces memory by replacing the int variable gl_waiters2 by a single bit in the gl_flags. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Combine rg_flags and rd_flagsBob Peterson2008-03-31
| | | | | | | | This patch reduces the memory required by GFS2 by combining the rd_flags and rg_flags (in core only). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Allocate gfs2_rgrpd from slab memoryBob Peterson2008-03-31
| | | | | | | | | This patch moves the gfs2_rgrpd structure to its own slab memory. This makes it easier to control and monitor, and yields less memory fragmentation. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] Plug an unlikely leakBob Peterson2008-03-31
| | | | | Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [GFS2] make gfs2_glock_hold() staticAdrian Bunk2008-03-31
| | | | | | | gfs2_glock_hold() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>