| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch changes GFS2's discard issuing code so that it calls
function sb_issue_discard rather than blkdev_issue_discard. The
code was calling blkdev_issue_discard and specifying the correct
sector offset and sector size, but blkdev_issue_discard expects
these values to be in terms of 512 byte sectors, even if the native
sector size for the device is different. Calling sb_issue_discard
with the BLOCK size instead ensures the correct block-to-512b-sector
translation. I verified that "minlen" is specified in blocks, so
comparing it to a number of blocks is correct.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
When withdraw occurs, we need to continue to allow unlocks of fcntl
locks to occur, however these will only be local, since the node has
withdrawn from the cluster. This prevents triggering a VFS level
bug trap due to locks remaining when a file is closed.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
The error code in gfs2_rs_alloc() is set to ENOMEM when error
but never be used, instead, gfs2_rs_alloc() always return 0.
Fix to return 'error'.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
| |
Use memchr_inv to verify that the specified memory range is cleared.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: cluster-devel@redhat.com
Cc: Christine Caulfield <ccaulfie@redhat.com>
Cc: David Teigland <teigland@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
The temp lvb bitmap was on the stack, which could
be an alignment problem for __set_bit_le. Use
kmalloc for it instead.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
According to SUSv3:
[EACCES] Permission denied. An attempt was made to access a file in a way
forbidden by its file access permissions.
[EPERM] Operation not permitted. An attempt was made to perform an operation
limited to processes with appropriate privileges or to the owner of a file
or other resource.
So -EPERM should be returned if capability checks fails.
Strictly speaking this is an API change since the error code user sees is
altered.
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Acked-by: Jan Kara <jack@suse.cz>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch is a follow up on below patch:
[PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type
commit: 216b6cbdcbd86b1db0754d58886b466ae31f5a63
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Vivek Trivedi <t.vivek@samsung.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
| | |
| |
| |
| | |
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
"This set of changes starts with a few small enhnacements to the user
namespace. reboot support, allowing more arbitrary mappings, and
support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
user namespace root.
I do my best to document that if you care about limiting your
unprivileged users that when you have the user namespace support
enabled you will need to enable memory control groups.
There is a minor bug fix to prevent overflowing the stack if someone
creates way too many user namespaces.
The bulk of the changes are a continuation of the kuid/kgid push down
work through the filesystems. These changes make using uids and gids
typesafe which ensures that these filesystems are safe to use when
multiple user namespaces are in use. The filesystems converted for
3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The
changes for these filesystems were a little more involved so I split
the changes into smaller hopefully obviously correct changes.
XFS is the only filesystem that remains. I was hoping I could get
that in this release so that user namespace support would be enabled
with an allyesconfig or an allmodconfig but it looks like the xfs
changes need another couple of days before it they are ready."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
cifs: Enable building with user namespaces enabled.
cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
cifs: Convert struct cifs_sb_info to use kuids and kgids
cifs: Modify struct smb_vol to use kuids and kgids
cifs: Convert struct cifsFileInfo to use a kuid
cifs: Convert struct cifs_fattr to use kuid and kgids
cifs: Convert struct tcon_link to use a kuid.
cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
cifs: Convert from a kuid before printing current_fsuid
cifs: Use kuids and kgids SID to uid/gid mapping
cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
cifs: Override unmappable incoming uids and gids
nfsd: Enable building with user namespaces enabled.
nfsd: Properly compare and initialize kuids and kgids
nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
nfsd: Modify nfsd4_cb_sec to use kuids and kgids
nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
nfsd: Convert nfsxdr to use kuids and kgids
nfsd: Convert nfs3xdr to use kuids and kgids
...
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When reading dinodes from the disk convert uids and gids
into kuids and kgids to store in vfs data structures.
When writing to dinodes to the disk convert kuids and kgids
in the in memory structures into plain uids and gids.
For now all on disk data structures are assumed to be
stored in the initial user namespace.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Where kuid_t values are compared use uid_eq and where kgid_t values
are compared use gid_eq. This is unfortunately necessary because
of the type safety that keeps someone from accidentally mixing
kuids and kgids with other types.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | | |
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Remove the QUOTA_USER and QUOTA_GRUP defines. Remove
the last vestigal users of QUOTA_USER and QUOTA_GROUP.
Now that struct kqid is used throughout the gfs2 quota
code the need there is to use QUOTA_USER and QUOTA_GROUP
and the defines are just extraneous and confusing.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
things simpler along the way.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
- In quota_refresh_user_store convert the user supplied uid
into a kqid and pass it to gfs2_quota_refresh.
- In quota_refresh_group_store convert the user supplied gid
into a kqid and pass it to gfs2_quota_refresh.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | | |
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | | |
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Both qd_alloc and qd2offset perform the exact same computation
to get an index from a gfs2_quota_data. Make life a little
simpler and factor out this index computation.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When a quota is queried return the uid or the gid in the mapped into
the caller's user namespace. In addition perform the munged version
of the mapping so that instead of -1 a value that does not map is
reported as the overflowuid or the overflowgid.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Split NO_QUOTA_CHANGE into NO_UID_QUTOA_CHANGE and NO_GID_QUTOA_CHANGE
so the constants may be well typed.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
In set_dqblk it is an error to look at fdq->d_id or fdq->d_flags.
Userspace quota applications do not set these fields when calling
quotactl(Q_XSETQLIM,...), and the kernel does not set those fields
when quota_setquota calls set_dqblk.
gfs2 never looks at fdq->d_id or fdq->d_flags after checking
to see if they match the id and type supplied to set_dqblk.
No other linux filesystem in set_dqblk looks at either fdq->d_id
or fdq->d_flags.
Therefore remove these bogus checks from gfs2 and allow normal
quota setting applications to work.
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Create a helper function to check if a backing device requires stable
page writes and, if so, performs the necessary wait. Then, make it so
that all points in the memory manager that handle making pages writable
use the helper function. This should provide stable page write support
to most filesystems, while eliminating unnecessary waiting for devices
that don't require the feature.
Before this patchset, all filesystems would block, regardless of whether
or not it was necessary. ext3 would wait, but still generate occasional
checksum errors. The network filesystems were left to do their own
thing, so they'd wait too.
After this patchset, all the disk filesystems except ext3 and btrfs will
wait only if the hardware requires it. ext3 (if necessary) snapshots
pages instead of blocking, and btrfs provides its own bdi so the mm will
never wait. Network filesystems haven't been touched, so either they
provide their own stable page guarantees or they don't block at all.
The blocking behavior is back to what it was before 3.0 if you don't
have a disk requiring stable page writes.
Here's the result of using dbench to test latency on ext2:
3.8.0-rc3:
Operation Count AvgLat MaxLat
----------------------------------------
WriteX 109347 0.028 59.817
ReadX 347180 0.004 3.391
Flush 15514 29.828 287.283
Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms
3.8.0-rc3 + patches:
WriteX 105556 0.029 4.273
ReadX 335004 0.005 4.112
Flush 14982 30.540 298.634
Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms
As you can see, the maximum write latency drops considerably with this
patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave
similarly, but see the cover letter for those results.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch reinstates the ack system which withdraw should be using. It
appears to have been accidentally forgotten when the lock module was
merged into GFS2, due to two different sysfs files having the same name.
Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch allocates a block reservation structure before growing
or shrinking a file. Without this structure, the grow or shink code
can reference the bad pointer.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The intent here is to split the processing of the glock lru
list into two parts, so that the selection of glocks and the
disposal are separate functions. The plan is then, that further
updates can then be made to these functions in the future
to improve the selection of glocks and also the efficiency of
glock disposal.
The new feature which this patch brings is sorting the
glocks to be disposed of into glock number (and thus also
disk block number) order. Not all glocks will need i/o in
order to dispose of them, but some will, and at least we'll
generate mostly disk block order i/o now.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Instead of using a list of buffers to write ahead of the journal
flush, this now uses a list of inodes and calls ->writepages
via filemap_fdatawrite() in order to achieve the same thing. For
most use cases this results in a shorter ordered write list,
as well as much larger i/os being issued.
The ordered write list is sorted by inode number before writing
in order to retain the disk block ordering between inodes as
per the previous code.
The previous ordered write code used to conflict in its assumptions
about how to write out the disk blocks with mpage_writepages()
so that with this updated version we can also use mpage_writepages()
for GFS2's ordered write, writepages implementation. So we will
also send larger i/os from writeback too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The freeze code has not been looked at a lot recently. Upstream has
moved on, and this is an attempt to catch us back up again. There
is a vfs level interface for the freeze code which can be called
from our (obsolete, but kept for backward compatibility purposes)
sysfs freeze interface. This means freezing this way vs. doing it
from the ioctl should now work in identical fashion.
As a result of this, the freeze function is only called once
and we can drop our own special purpose code for counting the
number of freezes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The locking in gfs2_attach_bufdata() was type specific (data/meta)
which made the function rather confusing. This patch moves the core
of gfs2_attach_bufdata() into trans.c renaming it gfs2_alloc_bufdata()
and moving the locking into gfs2_trans_add_data()/gfs2_trans_add_meta()
As a result all of the locking related to adding data and metadata to
the journal is now in these two functions. This should help to clarify
what is going on, and give us some opportunities to simplify in
some cases.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This patch copies the body of gfs2_trans_add_bh into the two newly
added gfs2_trans_add_data and gfs2_trans_add_meta functions. We can
then move the .lo_add functions from lops.c into trans.c and call
them directly.
As a result of this, we no longer need to use the .lo_add functions
at all, so that is removed from the log operations structure.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There is little common content in gfs2_trans_add_bh() between the data
and meta classes by the time that the functions which it calls are
taken into account. The intent here is to split this into two
separate functions. Stage one is to introduce gfs2_trans_add_data()
and gfs2_trans_add_meta() and update the callers accordingly.
Later patches will then pull in the content of gfs2_trans_add_bh()
and its dependent functions in order to clean up the code in this
area.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This moves the lo_add function for revokes into trans.c, removing
a function call and making the code easier to read.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | | |
This breaks out the LRU scanning function from the shrinker in
preparation for adding other callers to the LRU scanner.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |/
|/|
| |
| |
| |
| |
| |
| |
| | |
The recent commit fb6791d100d1bba20b5cdbc4912e1f7086ec60f8
included the wrong logic. The lvbptr check was incorrectly
added after the patch was tested.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
In function rg_mblk_search, it's searching for multiple blocks in
a given state (e.g. "free"). If there's an active block reservation
its goal is the next free block of that. If the resource group
contains the dinode's goal block, that's used for the search. But
if neither is the case, it uses the rgrp's last allocated block.
That way, consecutive allocations appear after one another on media.
The problem comes in when you hit the end of the rgrp; it would never
start over and search from the beginning. This became a problem,
since if you deleted all the files and data from the rgrp, it would
never start over and find free blocks. So it had to keep searching
further out on the media to allocate blocks. This patch resets the
rd_last_alloc after it does an unsuccessful search at the end of
the rgrp.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds a return code check after calling function
gfs2_rbm_from_block while determining the free extent size.
That way, when the end of an rgrp is reached, it won't try
to process unaligned blocks after the end.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
QE aio tests uncovered a race condition in gfs2_rs_alloc where it's possible
to come out of the function with a valid ip->i_res allocation but it gets
freed before use resulting in a NULL ptr dereference.
This patch envelopes the initial short-circuit check for non-NULL ip->i_res
into the mutex lock. With this patch, I was able to successfully run the
reproducer test multiple times.
Resolves: rhbz#878476
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |/
|
|
|
|
|
|
|
| |
When generating the DLM lock name, a value of 0 would skip
the loop and leave the string unchanged. This left locks with
a value of 0 unlabeled. Initializing the string to '0' fixes this.
Signed-off-by: Nathan Straz <nstraz@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| |
|
|
|
|
|
|
|
| |
But the kernel decided to call it "origin" instead. Fix most of the
sites.
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Pull GFS2 updates from Steven Whitehouse:
"The main feature this time is the new Orlov allocator and the patches
leading up to it which allow us to allocate new inodes from their own
allocation context, rather than borrowing that of their parent
directory. It is this change which then allows us to choose a
different location for subdirectories when required. This works
exactly as per the ext3 implementation from the users point of view.
In addition to that, we've got a speed up in gfs2_rbm_from_block()
from Bob Peterson, three locking related improvements from Dave
Teigland plus a selection of smaller bug fixes and clean ups."
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw:
GFS2: Set gl_object during inode create
GFS2: add error check while allocating new inodes
GFS2: don't reference inode's glock during block allocation trace
GFS2: remove redundant lvb pointer
GFS2: only use lvb on glocks that need it
GFS2: skip dlm_unlock calls in unmount
GFS2: Fix one RG corner case
GFS2: Eliminate redundant buffer_head manipulation in gfs2_unlink_inode
GFS2: Use dirty_inode in gfs2_dir_add
GFS2: Fix truncation of journaled data files
GFS2: Add Orlov allocator
GFS2: Use proper allocation context for new inodes
GFS2: Add test for resource group congestion status
GFS2: Rename glops go_xmote_th to go_sync
GFS2: Speed up gfs2_rbm_from_block
GFS2: Review bug traps in glops.c
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch fixes a cluster coherency problem that occurs when one
node creates a file, does several writes, then a different node
tries to write to the same file. When the inode's glock is demoted,
the inode wasn't synced to the media properly because the gl_object
wasn't set. Later, the flush daemon noticed the uncommitted data
and tried to flush it, only to discover the glock was no longer locked
properly in exclusive mode. That caused an assert withdraw.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch adds a return code check after attempting to allocate
a new inode during dinode creation.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch changes the block allocation trace so that it references
the rgd's glock rather than the inode's glock. Now that the order
of inode creation is switched, this prevents a reference to the
glock which may not be set yet.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
The lksb struct already contains a pointer to the lvb,
so another directly from the glock struct is not needed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
Save the effort of allocating, reading and writing
the lvb for most glocks that do not use it.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When unmounting, gfs2 does a full dlm_unlock operation on every
cached lock. This can create a very large amount of work and can
take a long time to complete. However, the vast majority of these
dlm unlock operations are unnecessary because after all the unlocks
are done, gfs2 leaves the dlm lockspace, which automatically clears
the locks of the leaving node, without unlocking each one individually.
So, gfs2 can skip explicit dlm unlocks, and use dlm_release_lockspace to
remove the locks implicitly. The one exception is when the lock's lvb is
being used. In this case, dlm_unlock is called because it may update the
lvb of the resource.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| | |
For filesystems with only a single resource group, we need to be careful
that the allocation loop will not land up with a NULL resource group. This
fixes a bug in a previous patch where the gfs2_rgrpd_get_next() function
was being used instead of gfs2_rgrpd_get_first()
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since we now have a dirty_inode that takes care of manipulating the
inode buffer and writing from the inode to the buffer, we can
eliminate some unnecessary buffer manipulations in gfs2_unlink_inode
that are now redundant.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
This patch changes the gfs2_dir_add function so that it uses
the dirty_inode function (via mark_inode_dirty) rather than manually
updating the dinode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
