aboutsummaryrefslogtreecommitdiffstats
path: root/fs/ext3
Commit message (Collapse)AuthorAge
* fix inode_table test in ext234_check_descriptorsEric Sandeen2007-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ext[234]_check_descriptors sanity checks block group descriptor geometry at mount time, testing whether the block bitmap, inode bitmap, and inode table reside wholly within the blockgroup. However, the inode table test is off by one so that if the last block in the inode table resides on the last block of the block group, the test incorrectly fails. This is because it tests the last block as (start + length) rather than (start + length - 1). This can be seen by trying to mount a filesystem made such as: mkfs.ext2 -F -b 1024 -m 0 -g 256 -N 3744 fsfile 1024 which yields: EXT2-fs error (device loop0): ext2_check_descriptors: Inode table for group 0 not in group (block 101)! EXT2-fs: group descriptors corrupted! There is a similar bug in e2fsprogs, patch already sent for that. (I wonder if inside(), outside(), and/or in_range() should someday be used in this and other tests throughout the ext filesystems...) Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: Remove slab destructors from kmem_cache_create().Paul Mundt2007-07-19
| | | | | | | | | | | | | | Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* readahead: split ondemand readahead interface into two functionsRusty Russell2007-07-19
| | | | | | | | | | | | | Split ondemand readahead interface into two functions. I think this makes it a little clearer for non-readahead experts (like Rusty). Internally they both call ondemand_readahead(), but the page argument is changed to an obvious boolean flag. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* readahead: convert ext3/ext4 invocationsFengguang Wu2007-07-19
| | | | | | | | | | | | | | | | | Convert ext3/ext4 dir reads to use on-demand readahead. Readahead for dirs operates _not_ on file level, but on blockdev level. This makes a difference when the data blocks are not continuous. And the read routine is somehow opaque: there's no handy info about the status of current page. So a simplified call scheme is employed: to call into readahead whenever the current page falls out of readahead windows. Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Cc: Steven Pratt <slpratt@austin.ibm.com> Cc: Ram Pai <linuxram@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Introduce is_owner_or_cap() to wrap CAP_FOWNER use with fsuid checkSatyam Sharma2007-07-17
| | | | | | | | | | | | | | | | | | | | Introduce is_owner_or_cap() macro in fs.h, and convert over relevant users to it. This is done because we want to avoid bugs in the future where we check for only effective fsuid of the current task against a file's owning uid, without simultaneously checking for CAP_FOWNER as well, thus violating its semantics. [ XFS uses special macros and structures, and in general looked ... untouchable, so we leave it alone -- but it has been looked over. ] The (current->fsuid != inode->i_uid) check in generic_permission() and exec_permission_lite() is left alone, because those operations are covered by CAP_DAC_OVERRIDE and CAP_DAC_READ_SEARCH. Similarly operations falling under the purview of CAP_CHOWN and CAP_LEASE are also left alone. Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in> Cc: Al Viro <viro@ftp.linux.org.uk> Acked-by: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* knfsd: exportfs: add exportfs.h headerChristoph Hellwig2007-07-17
| | | | | | | | | | | | | currently the export_operation structure and helpers related to it are in fs.h. fs.h is already far too large and there are very few places needing the export bits, so split them off into a separate header. [akpm@linux-foundation.org: fix cifs build] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Neil Brown <neilb@suse.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: statfs speed upBadari Pulavarty2007-07-16
| | | | | | | | | | | | | | | | | | This is a patch that speeds up statfs. It is very simple - the "overhead" calculation, which takes a huge amount of time for large filesystems, never changes unless the size of the filesystem itself changes. That means we can store it in memory and only recalculate if the filesystem has been resized (almost never). It also fixes a minor problem that we never update the on-disk superblock free blocks/inodes counts until the filesystem is unmounted. While not fatal, we may as well update that on disk when we have the information, and it makes things like debugfs and dumpe2fs report a bit more accurate info. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: fix error handling in ext3_create_journal()Borislav Petkov2007-07-16
| | | | | | | | Fix error handling in ext3_create_journal according to kernel conventions. Signed-off-by: Borislav Petkov <bbpetkov@yahoo.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* is_power_of_2: ext3/super.cvignesh babu2007-07-16
| | | | | | | | Replace (n & (n-1)) in the context of power of 2 checks with is_power_of_2() Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: remove extra IS_RDONLY() checkDave Hansen2007-07-16
| | | | | | | | | | | ext3_change_inode_journal_flag() is only called from one location: ext3_ioctl(EXT3_IOC_SETFLAGS). That ioctl case already has a IS_RDONLY() call in it so this one is superfluous. Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: fix deadlock in ext3_remount() and orphan list handlingJan Kara2007-07-16
| | | | | | | | | | | | | | | | ext3_orphan_add() and ext3_orphan_del() functions lock sb->s_lock with a transaction started with ext3_mark_recovery_complete() waits for a transaction holding sb->s_lock, thus leading to a possible deadlock. At the moment we call ext3_mark_recovery_complete() from ext3_remount() we have done all the work needed for remounting and thus we are safe to drop sb->s_lock before we wait for transactions to commit. Note that at this moment we are still guarded by s_umount lock against other remounts/umounts. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Sandeen <sandeen@sandeen.net> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3/ext4: orphan list corruption due bad inodeVasily Averin2007-07-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After ext3 orphan list check has been added into ext3_destroy_inode() (please see my previous patch) the following situation has been detected: EXT3-fs warning (device sda6): ext3_unlink: Deleting nonexistent file (37901290), 0 Inode 00000101a15b7840: orphan list check failed! 00000773 6f665f00 74616d72 00000573 65725f00 06737270 66000000 616d726f ... Call Trace: [<ffffffff80211ea9>] ext3_destroy_inode+0x79/0x90 [<ffffffff801a2b16>] sys_unlink+0x126/0x1a0 [<ffffffff80111479>] error_exit+0x0/0x81 [<ffffffff80110aba>] system_call+0x7e/0x83 First messages said that unlinked inode has i_nlink=0, then ext3_unlink() adds this inode into orphan list. Second message means that this inode has not been removed from orphan list. Inode dump has showed that i_fop = &bad_file_ops and it can be set in make_bad_inode() only. Then I've found that ext3_read_inode() can call make_bad_inode() without any error/warning messages, for example in the following case: ... if (inode->i_nlink == 0) { if (inode->i_mode == 0 || !(EXT3_SB(inode->i_sb)->s_mount_state & EXT3_ORPHAN_FS)) { /* this inode is deleted */ brelse (bh); goto bad_inode; ... Bad inode can live some time, ext3_unlink can add it to orphan list, but ext3_delete_inode() do not deleted this inode from orphan list. As result we can have orphan list corruption detected in ext3_destroy_inode(). However it is not clear for me how to fix this issue correctly. As far as i see is_bad_inode() is called after iget() in all places excluding ext3_lookup() and ext3_get_parent(). I believe it makes sense to add bad inode check to these functions too and call iput if bad inode detected. Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3/ext4: orphan list check on destroy_inodeVasily Averin2007-07-16
| | | | | | | | | | | | Customers claims to ext3-related errors, investigation showed that ext3 orphan list has been corrupted and have the reference to non-ext3 inode. The following debug helps to understand the reasons of this issue. [akpm@linux-foundation.org: update for print_hex_dump() changes] Signed-off-by: Vasily Averin <vvs@sw.ru> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sendfile: remove .sendfile from filesystems that use generic_file_sendfile()Jens Axboe2007-07-10
| | | | | | | They can use generic_file_splice_read() instead. Since sys_sendfile() now prefers that, there should be no change in behaviour. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* ext3: lost brelse in ext3_read_inode()Kirill Korotaev2007-06-24
| | | | | | | | | One of error path in ext3_read_inode() leaks bh since brelse is forgoten. Signed-off-by: Kirill Korotaev <dev@openvz.org> Acked-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter2007-05-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: use zero_user_pageNate Diller2007-05-09
| | | | | | | | Use zero_user_page() instead of open-coding it. Signed-off-by: Nate Diller <nate.diller@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: copy i_flags to inode flags on writeJan Kara2007-05-08
| | | | | | | | | | | | | | | | | | | | A patch that stores inode flags such as S_IMMUTABLE, S_APPEND, etc. from i_flags to EXT3_I(inode)->i_flags when inode is written to disk. The same thing is done on GETFLAGS ioctl. Quota code changes these flags on quota files (to make it harder for sysadmin to screw himself) and these changes were not correctly propagated into the filesystem (especially, lsattr did not show them and users were wondering...). Propagate flags such as S_APPEND, S_IMMUTABLE, etc. from i_flags into ext3-specific i_flags. Hence, when someone sets these flags via a different interface than ioctl, they are stored correctly. Signed-off-by: Jan Kara <jack@suse.cz> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* header cleaning: don't include smp_lock.h when not usedRandy Dunlap2007-05-08
| | | | | | | | | | | | Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext3: dirindex error pointer issuesDmitriy Monakhov2007-05-08
| | | | | | | | | | | | | | | | | | | | | | | | - ext3_dx_find_entry() exit with out setting proper error pointer - do_split() exit with out setting proper error pointer it is realy painful because many callers contain folowing code: de = do_split(handle,dir, &bh, frame, &hinfo, &retval); if (!(de)) return retval; <<< WOW retval wasn't changed by do_split(), so caller failed <<< but return SUCCESS :) - Rearrange do_split() error path. Current error path is realy ugly, all this up and down jump stuff doesn't make code easy to understand. [dmonakhov@sw.ru: fix annoying fake error messages] Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ext2/3/4: fix file date underflow on ext2 3 filesystems on 64 bit systemsMarkus Rechberger2007-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Taken from http://bugzilla.kernel.org/show_bug.cgi?id=5079 signed long ranges from -2.147.483.648 to 2.147.483.647 on x86 32bit 10000011110110100100111110111101 .. -2,082,844,739 10000011110110100100111110111101 .. 2,212,122,557 <- this currently gets stored on the disk but when converting it to a 64bit signed long value it loses its sign and becomes positive. Cc: Andreas Dilger <adilger@dilger.ca> Cc: <linux-ext4@vger.kernel.org> Andreas says: This patch is now treating timestamps with the high bit set as negative times (before Jan 1, 1970). This means we lose 1/2 of the possible range of timestamps (lopping off 68 years before unix timestamp overflow - now only 30 years away :-) to handle the extremely rare case of setting timestamps into the distant past. If we are only interested in fixing the underflow case, we could just limit the values to 0 instead of storing negative values. At worst this will skew the timestamp by a few hours for timezones in the far east (files would still show Jan 1, 1970 in "ls -l" output). That said, it seems 32-bit systems (mine at least) allow files to be set into the past (01/01/1907 works fine) so it seems this patch is bringing the x86_64 behaviour into sync with other kernels. On the plus side, we have a patch that is ready to add nanosecond timestamps to ext3 and as an added bonus adds 2 high bits to the on-disk timestamp so this extends the maximum date to 2242. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter2007-05-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: remove destroy_dirty_buffers from invalidate_bdev()Peter Zijlstra2007-05-07
| | | | | | | | | | | | | | | Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't been used in 6 years (so akpm says). find * -name \*.[ch] | xargs grep -l invalidate_bdev | while read file; do quilt add $file; sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file; done Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] revert "retries in ext3_prepare_write() violate ordering requirements"Andrew Morton2007-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert e92a4d595b464c4aae64be39ca61a9ffe9c8b278. Dmitry points out "When we block_prepare_write() failed while ext3_prepare_write() we jump to "failure" label and call ext3_prepare_failure() witch search last mapped bh and invoke commit_write untill it. This is wrong!! because some bh from begining to the last mapped bh may be not uptodate. As a result we commit to disk not uptodate page content witch contains garbage from previous usage." and "Unexpected file size increasing." Call trace the same as it was in first issue but result is different. For example we have file with i_size is zero. we want write two blocks , but fs has only one free block. ->ext3_prepare_write(...from == 0, to == 2048) retry: ->block_prepare_write() == -ENOSPC# we failed but allocated one block here. ->ext3_prepare_failure() ->commit_write( from == 0, to == 1024) # after this i_size becomes 1024 :) if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) goto retry; Finally when all retries will be spended ext3_prepare_failure return -ENOSPC, but i_size was increased and later block trimm procedures can't help here. We don't appear to have the horsepower to fix these issues, so let's put things back the way they were for now. Cc: Kirill Korotaev <dev@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: Andrey Savochkin <saw@sw.ru> Cc: <linux-ext4@vger.kernel.org> Cc: Dmitriy Monakhov <dmonakhov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] "ext[34]: EA block reference count racing fix" performance fixAndrew Morton2007-03-23
| | | | | | | | | A little mistake in 8a2bfdcbfa441d8b0e5cb9c9a7f45f77f80da465 is making all transactions synchronous, which reduces ext3 performance to comical levels. Cc: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] ext[34]: EA block reference count racing fixMingming Cao2007-03-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] ext[234]: update documentationAneesh Kumar K.V2007-02-20
| | | | | | Signed-off-by: "Aneesh Kumar K.V" <aneesh.kumar@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-14
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] Mark struct super_operations constJosef 'Jeff' Sipek2007-02-12
| | | | | | | | | | | This patch is inspired by Arjan's "Patch series to mark struct file_operations and struct inode_operations const". Compile tested with gcc & sparse. Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] mark struct inode_operations const 1Arjan van de Ven2007-02-12
| | | | | | | | | | | Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] jbd layer function called instead of fs specific oneDmitriy Monakhov2007-02-11
| | | | | | | | jbd function called instead of fs specific one. Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] remove ext[34]_inc_count and _dec_countEric Sandeen2007-02-11
| | | | | | | | | | - Naming is confusing, ext3_inc_count manipulates i_nlink not i_count - handle argument passed in is not used - ext3 and ext4 already call inc_nlink and dec_nlink directly in other places Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] return ENOENT from ext3_link when racing with unlinkEric Sandeen2007-02-11
| | | | | | | | | | | | | | Return -ENOENT from ext[34]_link if we've raced with unlink and i_nlink is 0. Doing otherwise has the potential to corrupt the orphan inode list, because we'd wind up with an inode with a non-zero link count on the list, and it will never get properly cleaned up & removed from the orphan list before it is freed. [akpm@osdl.org: build fix] Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fix umask when noACL kernel meets extN tuned for ACLsHugh Dickins2007-02-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix insecure default behaviour reported by Tigran Aivazian: if an ext2 or ext3 or ext4 filesystem is tuned to mount with "acl", but mounted by a kernel built without ACL support, then umask was ignored when creating inodes - though root or user has umask 022, touch creates files as 0666, and mkdir creates directories as 0777. This appears to have worked right until 2.6.11, when a fix to the default mode on symlinks (always 0777) assumed VFS applies umask: which it does, unless the mount is marked for ACLs; but ext[234] set MS_POSIXACL in s_flags according to s_mount_opt set according to def_mount_opts. We could revert to the 2.6.10 ext[234]_init_acl (adding an S_ISLNK test); but other filesystems only set MS_POSIXACL when ACLs are configured. We could fix this at another level; but it seems most robust to avoid setting the s_mount_opt flag in the first place (at the expense of more ifdefs). Likewise don't set the XATTR_USER flag when built without XATTR support. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: <linux-ext4@vger.kernel.org> Cc: Andreas Gruenbacher <agruen@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] ext3: refuse ro to rw remount of fs with orphan inodesEric Sandeen2007-02-11
| | | | | | | | | | | | | | | In the rare case where we have skipped orphan inode processing due to a readonly block device, and the block device subsequently changes back to read-write, disallow a remount,rw transition of the filesystem when we have an unprocessed orphan inodes as this would corrupt the list. Ideally we should process the orphan inode list during the remount, but that's trickier, and this plugs the hole for now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] LOG2: Implement a general integer log2 facility in the kernelDavid Howells2006-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This facility provides three entry points: ilog2() Log base 2 of unsigned long ilog2_u32() Log base 2 of u32 ilog2_u64() Log base 2 of u64 These facilities can either be used inside functions on dynamic data: int do_something(long q) { ...; y = ilog2(x) ...; } Or can be used to statically initialise global variables with constant values: unsigned n = ilog2(27); When performing static initialisation, the compiler will report "error: initializer element is not constant" if asked to take a log of zero or of something not reducible to a constant. They treat negative numbers as unsigned. When not dealing with a constant, they fall back to using fls() which permits them to use arch-specific log calculation instructions - such as BSR on x86/x86_64 or SCAN on FRV - if available. [akpm@osdl.org: MMC fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: David Howells <dhowells@redhat.com> Cc: Wojtek Kaniewski <wojtekka@toxygen.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: change uses of f_{dentry, vfsmnt} to use f_pathJosef "Jeff" Sipek2006-12-08
| | | | | | | | | Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the ext3 filesystem. Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: fix _with_rsv freezeHugh Dickins2006-12-07
| | | | | | | | | | | | Port fix to the off-by-one in find_next_usable_block's memscan from ext2 to ext3; but it didn't cause a serious problem for ext3 because the additional ext3_test_allocatable check rescued it from the error. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: use io_error labelHugh Dickins2006-12-07
| | | | | | | | | | | ext3_new_blocks has a nice io_error label for setting -EIO, so goto that in the one place that doesn't already use it. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: say rb_entry not list_entryHugh Dickins2006-12-07
| | | | | | | | | | | The reservations tree is an rb_tree not a list, so it's less confusing to use rb_entry() than list_entry() - though they're both just container_of(). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: fix off-by-one against rsv_endHugh Dickins2006-12-07
| | | | | | | | | | | rsv_end is the last block within the reservation, so alloc_new_reservation should accept start_block == rsv_end as success. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: fix off-by-one against grp_goalHugh Dickins2006-12-07
| | | | | | | | | | | grp_goal 0 is a genuine goal (unlike -1), so ext3_try_to_allocate_with_rsv should treat it as such. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3 balloc: reset windowsz when fullHugh Dickins2006-12-07
| | | | | | | | | | | | ext3_new_blocks should reset the reservation window size to 0 when squeezing the last blocks out of an almost full filesystem, so the retry doesn't skip any groups with less than half that free, reporting ENOSPC too soon. Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3/4: don't do orphan processing on readonly devicesEric Sandeen2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | If you do something like: # touch foo # tail -f foo & # rm foo # <take snapshot> # <mount snapshot> you'll panic, because ext3/4 tries to do orphan list processing on the readonly snapshot device, and: kernel: journal commit I/O error kernel: Assertion failure in journal_flush_Rsmp_e2f189ce() at journal.c:1356: "!journal->j_checkpoint_transactions" kernel: Kernel panic: Fatal exception for a truly readonly underlying device, it's reasonable and necessary to just skip orphan list processing. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: fix reservation extensionMingming Cao2006-12-07
| | | | | | | | | | | | | | | | | | | | | | Hugh Dickins wrote: > Not found anything relevant, but I keep noticing these lines > in ext2_try_to_allocate_with_rsv(), ext3 and ext4 similar: > > } else if (grp_goal > 0 && > (my_rsv->rsv_end - grp_goal + 1) < *count) > try_to_extend_reservation(my_rsv, sb, > *count-my_rsv->rsv_end + grp_goal - 1); > > They're wrong, a no-op in most groups, aren't they? rsv_end is an > absolute block number, whereas grp_goal is group-relative, so the > calculation ought to bring in group_first_block? Or I'm confused. > Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: "linux-ext4@vger.kernel.org" <linux-ext4@vger.kernel.org> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] retries in ext3_prepare_write() violate ordering requirementsAndrey Savochkin2006-12-07
| | | | | | | | | | | | | | In journal=ordered or journal=data mode retry in ext3_prepare_write() breaks the requirements of journaling of data with respect to metadata. The fix is to call commit_write to commit allocated zero blocks before retry. Signed-off-by: Kirill Korotaev <dev@openvz.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Ken Chen <kenneth.w.chen@intel.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: uninline large functionsAndrew Morton2006-12-07
| | | | | | | | | Saves nearly 4kbytes on x86. Cc: Arnaldo Carvalho de Melo <acme@mandriva.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] handle ext3 directory corruption betterEric Sandeen2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've been using Steve Grubb's purely evil "fsfuzzer" tool, at http://people.redhat.com/sgrubb/files/fsfuzzer-0.4.tar.gz Basically it makes a filesystem, splats some random bits over it, then tries to mount it and do some simple filesystem actions. At best, the filesystem catches the corruption gracefully. At worst, things spin out of control. As you might guess, we found a couple places in ext3 where things spin out of control :) First, we had a corrupted directory that was never checked for consistency... it was corrupt, and pointed to another bad "entry" of length 0. The for() loop looped forever, since the length of ext3_next_entry(de) was 0, and we kept looking at the same pointer over and over and over and over... I modeled this check and subsequent action on what is done for other directory types in ext3_readdir... (adding this check adds some computational expense; I am testing a followup patch to reduce the number of times we check and re-check these directory entries, in all cases. Thanks for the idea, Andreas). Next we had a root directory inode which had a corrupted size, claimed to be > 200M on a 4M filesystem. There was only really 1 block in the directory, but because the size was so large, readdir kept coming back for more, spewing thousands of printk's along the way. Per Andreas' suggestion, if we're in this read error condition and we're trying to read an offset which is greater than i_blocks worth of bytes, stop trying, and break out of the loop. With these two changes fsfuzz test survives quite well on ext3. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Remove superfluous lock_super() in extN xattr codeAndreas Gruenbacher2006-12-07
| | | | | | | | | | lock_super() is unnecessary for setting super-block feature flags. Use the provided *_SET_COMPAT_FEATURE() macros as well. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ext3: fsid for statvfsPekka Enberg2006-12-07
| | | | | | | | | | | | | | Update ext3_statfs to return an FSID that is a 64 bit XOR of the 128 bit filesystem UUID as suggested by Andreas Dilger. See the following Bugzilla entry for details: http://bugzilla.kernel.org/show_bug.cgi?id=136 Cc: Andreas Dilger <adilger@clusterfs.com> Cc: Stephen Tweedie <sct@redhat.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-16 16:11:02 -0500