aboutsummaryrefslogtreecommitdiffstats
path: root/fs/cifs/connect.c
Commit message (Collapse)AuthorAge
* cifs: fix off-by-one bug in build_unc_path_to_rootJeff Layton2013-05-31
| | | | | | | | | | | | | | | | | | | | commit 839db3d10a (cifs: fix up handling of prefixpath= option) changed the code such that the vol->prepath no longer contained a leading delimiter and then fixed up the places that accessed that field to account for that change. One spot in build_unc_path_to_root was missed however. When doing the pointer addition on pos, that patch failed to account for the fact that we had already incremented "pos" by one when adding the length of the prepath. This caused a buffer overrun by one byte. This patch fixes the problem by correcting the handling of "pos". Cc: <stable@vger.kernel.org> # v3.8+ Reported-by: Marcus Moeller <marcus.moeller@gmx.ch> Reported-by: Ken Fallon <ken.fallon@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: fix error handling when calling cifs_parse_devnameJeff Layton2013-05-24
| | | | | | | | | | | | When we allowed separate unc= and prefixpath= mount options, we could ignore EINVAL errors from cifs_parse_devname. Now that they are deprecated, we need to check for that as well and fail the mount if it's malformed. Also fix a later error message that refers to the unc= option. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: allow sec=none mounts to work against servers that don't support ↵Jeff Layton2013-05-24
| | | | | | | | | | | extended security In the case of sec=none, we're not sending a username or password, so there's little benefit to mandating NTLMSSP auth. Allow it to use unencapsulated auth in that case. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: small variable name cleanupDan Carpenter2013-05-04
| | | | | | | | | | server and ses->server are the same, but it's a little bit ugly that we lock &ses->server->srv_mutex and unlock &server->srv_mutex. It causes a false positive in Smatch about inconsistent locking. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
* [CIFS] cifs: Rename cERROR and cFYI to cifs_dbgJoe Perches2013-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's not obvious from reading the macro names that these macros are for debugging. Convert the names to a single more typical kernel style cifs_dbg macro. cERROR(1, ...) -> cifs_dbg(VFS, ...) cFYI(1, ...) -> cifs_dbg(FYI, ...) cFYI(DBG2, ...) -> cifs_dbg(NOISY, ...) Move the terminating format newline from the macro to the call site. Add CONFIG_CIFS_DEBUG function cifs_vfs_err to emit the "CIFS VFS: " prefix for VFS messages. Size is reduced ~ 1% when CONFIG_CIFS_DEBUG is set (default y) $ size fs/cifs/cifs.ko* text data bss dec hex filename 265245 2525 132 267902 4167e fs/cifs/cifs.ko.new 268359 2525 132 271016 422a8 fs/cifs/cifs.ko.old Other miscellaneous changes around these conversions: o Miscellaneous typo fixes o Add terminating \n's to almost all formats and remove them from the macros to be more kernel style like. A few formats previously had defective \n's o Remove unnecessary OOM messages as kmalloc() calls dump_stack o Coalesce formats to make grep easier, added missing spaces when coalescing formats o Use %s, __func__ instead of embedded function name o Removed unnecessary "cifs: " prefixes o Convert kzalloc with multiply to kcalloc o Remove unused cifswarn macro Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: ignore the unc= and prefixpath= mount optionsJeff Layton2013-05-04
| | | | | | | | ...as advertised for 3.10. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: Allow passwords which begin with a delimitorSachin Prabhu2013-04-10
| | | | | | | | | | | Fixes a regression in cifs_parse_mount_options where a password which begins with a delimitor is parsed incorrectly as being a blank password. Signed-off-by: Sachin Prabhu <sprabhu@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: remove the sockopt= mount optionJeff Layton2013-03-06
| | | | | | | ...as promised for 3.9. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: set MAY_SIGN when sec=krb5Martijn de Gouw2013-02-27
| | | | | | | | | Setting this secFlg allows usage of dfs where some servers require signing and others don't. Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive.nl> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-02-25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace and namespace infrastructure changes from Eric W Biederman: "This set of changes starts with a few small enhnacements to the user namespace. reboot support, allowing more arbitrary mappings, and support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the user namespace root. I do my best to document that if you care about limiting your unprivileged users that when you have the user namespace support enabled you will need to enable memory control groups. There is a minor bug fix to prevent overflowing the stack if someone creates way too many user namespaces. The bulk of the changes are a continuation of the kuid/kgid push down work through the filesystems. These changes make using uids and gids typesafe which ensures that these filesystems are safe to use when multiple user namespaces are in use. The filesystems converted for 3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs. The changes for these filesystems were a little more involved so I split the changes into smaller hopefully obviously correct changes. XFS is the only filesystem that remains. I was hoping I could get that in this release so that user namespace support would be enabled with an allyesconfig or an allmodconfig but it looks like the xfs changes need another couple of days before it they are ready." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits) cifs: Enable building with user namespaces enabled. cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t cifs: Convert struct cifs_sb_info to use kuids and kgids cifs: Modify struct smb_vol to use kuids and kgids cifs: Convert struct cifsFileInfo to use a kuid cifs: Convert struct cifs_fattr to use kuid and kgids cifs: Convert struct tcon_link to use a kuid. cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t cifs: Convert from a kuid before printing current_fsuid cifs: Use kuids and kgids SID to uid/gid mapping cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc cifs: Use BUILD_BUG_ON to validate uids and gids are the same size cifs: Override unmappable incoming uids and gids nfsd: Enable building with user namespaces enabled. nfsd: Properly compare and initialize kuids and kgids nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids nfsd: Modify nfsd4_cb_sec to use kuids and kgids nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion nfsd: Convert nfsxdr to use kuids and kgids nfsd: Convert nfs3xdr to use kuids and kgids ...
| * cifs: Convert struct cifs_ses to use a kuid_t and a kgid_tEric W. Biederman2013-02-13
| | | | | | | | | | Cc: Steve French <smfrench@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
| * cifs: Convert struct cifs_sb_info to use kuids and kgidsEric W. Biederman2013-02-13
| | | | | | | | | | Cc: Steve French <smfrench@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
| * cifs: Modify struct smb_vol to use kuids and kgidsEric W. Biederman2013-02-13
| | | | | | | | | | | | | | | | | | Add two helper functions get_option_uid and get_option_gid to handle the work of parsing uid and gids paramaters from the command line and making kuids and kgids out of them. Cc: Steve French <smfrench@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
| * cifs: Convert struct tcon_link to use a kuid.Eric W. Biederman2013-02-13
| | | | | | | | | | Cc: Steve French <smfrench@gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
* | cifs: fix srcip_matches() for ipv6Nickolai Zeldovich2013-01-21
|/ | | | | | | | | | | | | | | | | srcip_matches() previously had code like this: srcip_matches(..., struct sockaddr *rhs) { /* ... */ struct sockaddr_in6 *vaddr6 = (struct sockaddr_in6 *) &rhs; return ipv6_addr_equal(..., &vaddr6->sin6_addr); } which interpreted the values on the stack after the 'rhs' pointer as an ipv6 address. The correct thing to do is to use 'rhs', not '&rhs'. Signed-off-by: Nickolai Zeldovich <nickolai@csail.mit.edu> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: fix double-free of "string" in cifs_parse_mount_optionsJeff Layton2012-12-20
| | | | | | | | | | | | | | | Dan reported the following regression in commit d387a5c5: + fs/cifs/connect.c:1903 cifs_parse_mount_options() error: double free of 'string' That patch has some of the new option parsing code free "string" without setting the variable to NULL afterward. Since "string" is automatically freed in an error condition, fix the code to just rely on that instead of freeing it explicitly. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: parse the device name into UNC and prepathJeff Layton2012-12-11
| | | | | | | | | | | | | This should fix a regression that was introduced when the new mount option parser went in. Also, when the unc= and prefixpath= options are provided, check their values against the ones we parsed from the device string. If they differ, then throw a warning that tells the user that we're using the values from the unc= option for now, but that that will change in 3.10. Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: fix up handling of prefixpath= optionJeff Layton2012-12-11
| | | | | | | | | | | | | | | | | | Currently the code takes care to ensure that the prefixpath has a leading '/' delimiter. What if someone passes us a prefixpath with a leading '\\' instead? The code doesn't properly handle that currently AFAICS. Let's just change the code to skip over any leading delimiter character when copying the prepath. Then, fix up the users of the prepath option to prefix it with the correct delimiter when they use it. Also, there's no need to limit the length of the prefixpath to 1k. If the server can handle it, why bother forbidding it? Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: clean up handling of unc= optionJeff Layton2012-12-11
| | | | | | | | | | | | | | | | | | | | | | Make sure we free any existing memory allocated for vol->UNC, just in case someone passes in multiple unc= options. Get rid of the check for too long a UNC. The check for >300 bytes seems arbitrary. We later copy this into the tcon->treeName, for instance and it's a lot shorter than 300 bytes. Eliminate an extra kmalloc and copy as well. Just set the vol->UNC directly with the contents of match_strdup. Establish that the UNC should be stored with '\\' delimiters. Use convert_delimiter to change it in place in the vol->UNC. Finally, move the check for a malformed UNC into cifs_parse_mount_options so we can catch that situation earlier. Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* Do not send SMB2 signatures for SMB3 framesSteve French2012-12-09
| | | | | | | | | | | Restructure code to make SMB2 vs. SMB3 signing a protocol specific op. SMB3 signing (AES_CMAC) is not enabled yet, but this restructuring at least makes sure we don't send an smb2 signature on an smb3 signed connection. A followon patch will add AES_CMAC and enable smb3 signing. Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Jeff Layton <jlayton@samba.org>
* cifs: always zero out smb_vol before parsing optionsJeff Layton2012-12-05
| | | | | | | | Currently, the code relies on the callers to do that and they all do, but this will ensure that it's always done. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: remove unneeded address argument from cifs_find_tcp_session and ↵Jeff Layton2012-12-05
| | | | | | | | | | match_server Now that the smb_vol contains the destination sockaddr, there's no need to pass it in separately. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: get rid of smb_vol->UNCip and smb_vol->portJeff Layton2012-12-05
| | | | | | | | | Passing this around as a string is contorted and painful. Instead, just convert these to a sockaddr as soon as possible, since that's how we're going to work with it later anyway. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: Add handling of blank password optionJesper Nilsson2012-12-05
| | | | | | | | | | | The option to have a blank "pass=" already exists, and with a password specified both "pass=%s" and "password=%s" are supported. Also, both blank "user=" and "username=" are supported, making "password=" the odd man out. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* Add SMB2.02 dialect supportSteve French2012-12-05
| | | | | | | | This patch enables optional for original SMB2 (SMB2.02) dialect by specifying vers=2.0 on mount. Reviewed-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Make use of common cifs_build_path_to_root for CIFS and SMB2Steve French2012-12-05
| | | | | | | | | because the is no difference here. This also adds support of prefixpath mount option for SMB2. Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: make error on lack of a unc= option more explicitJeff Layton2012-12-05
| | | | | | | | | | | | | | Error out with a clear error message if there is no unc= option. The existing code doesn't handle this in a clear fashion, and the check for a UNCip option with no UNC string is just plain wrong. Later, we'll fix the code to not require a unc= option, but for now we need this to at least clarify why people are getting errors about DFS parsing. With this change we can also get rid of some later NULL pointer checks since we know the UNC and UNCip will never be NULL there. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* default authentication needs to be at least ntlmv2 security for cifs mountsSteve French2012-12-05
| | | | | | | | | | | | | | | | We had planned to upgrade to ntlmv2 security a few releases ago, and have been warning users in dmesg on mount about the impending upgrade, but had to make a change (to use nltmssp with ntlmv2) due to testing issues with some non-Windows, non-Samba servers. The approach in this patch is simpler than earlier patches, and changes the default authentication mechanism to ntlmv2 password hashes (encapsulated in ntlmssp) from ntlm (ntlm is too weak for current use and ntlmv2 has been broadly supported for many, many years). Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Jeff Layton <jlayton@redhat.com>
* cifs: reinstate the forcegid optionJeff Layton2012-10-07
| | | | | | | | | | | Apparently this was lost when we converted to the standard option parser in 8830d7e07a5e38bc47650a7554b7c1cfd49902bf Cc: Sachin Prabhu <sprabhu@redhat.com> Cc: stable@vger.kernel.org # v3.4+ Reported-by: Gregory Lee Bartholomew <gregory.lee.bartholomew@gmail.com> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* [CIFS] Fix SMB2 negotiation support to select only one dialect (based on vers=)Steve French2012-10-01
| | | | | | | | | | | | | | | Based on whether the user (on mount command) chooses: vers=3.0 (for smb3.0 support) vers=2.1 (for smb2.1 support) or (with subsequent patch, which will allow SMB2 support) vers=2.0 (for original smb2.02 dialect support) send only one dialect at a time during negotiate (we had been sending a list). Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* cifs: remove support for deprecated "forcedirectio" and "strictcache" mount ↵Jeff Layton2012-09-24
| | | | | | | | | options ...and make the default cache=strict as promised for 3.7. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Fix fast lease break after open problemPavel Shilovsky2012-09-24
| | | | | | | | | | | | Now we walk though cifsFileInfo's list for every incoming lease break and look for an equivalent there. That approach misses lease breaks that come just after an open response - we don't have time to populate new cifsFileInfo structure to the list. Fix this by adding new list of pending opens and look for a lease there if we didn't find it in the list of cifsFileInfo structures. Signed-off-by: Pavel Shilovsky <pshilovsky@etersoft.ru> Signed-off-by: Steve French <sfrench@us.ibm.com>
* cifs: add deprecation warning to sockopt=TCP_NODELAY optionJeff Layton2012-09-24
| | | | | | | | Now that we're using TCP_CORK on the socket, there's no value in continuting to support this option. Schedule it for removal in 3.9. Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
* cifs: cork the socket before a send and uncork it afterwardJeff Layton2012-09-24
| | | | | | | | | | | | | | | We want to send SMBs as "atomically" as possible. Prior to sending any data on the socket, cork it to make sure that no non-full frames go out. Afterward, uncork it to make sure all of the data gets pushed out to the wire. Note that this more or less renders the socket=TCP_NODELAY mount option obsolete. When TCP_CORK and TCP_NODELAY are used on the same socket, TCP_NODELAY is essentially ignored. Acked-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Process oplocks for SMB2Pavel Shilovsky2012-09-24
| | | | | Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move r/wsize negotiating to ops structPavel Shilovsky2012-09-24
| | | | | Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Make CAP_* checks protocol independentPavel Shilovsky2012-07-24
| | | | | | | | | | Since both CIFS and SMB2 use ses->capabilities (server->capabilities) field but flags are different we should make such checks protocol independent. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Add echo request support for SMB2Pavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move echo code to osp structPavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move building path to root to ops structPavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move is_path_accessible to ops structPavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move informational tcon calls to ops structPavel Shilovsky2012-07-24
| | | | | | | and rename variables in cifs_mount. Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move getting dfs referalls to ops structPavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Process reconnects for SMB2 sharesPavel Shilovsky2012-07-24
| | | | | Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Add SMB2 credits supportPavel Shilovsky2012-07-24
| | | | | | | | | | | For SMB2 protocol we can add more than one credit for one received request: it depends on CreditRequest field in SMB2 response header. Also we divide all requests by type: echoes, oplocks and others. Each type uses its own slot pull. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Rename Get/FreeXid and make them work with unsigned intPavel Shilovsky2012-07-24
| | | | | | Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move protocol specific tcon/tdis code to ops structPavel Shilovsky2012-07-24
| | | | | | | | and rename variables around the code changes. Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move protocol specific session setup/logoff code to ops structPavel Shilovsky2012-07-24
| | | | | | Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move protocol specific negotiate code to ops structPavel Shilovsky2012-07-24
| | | | | | Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
* CIFS: Move trans2 processing to ops structPavel Shilovsky2012-07-24
| | | | | | Reviewed-by: Jeff Layton <jlayton@samba.org> Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by: Steve French <smfrench@gmail.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-14 17:51:30 -0500