aboutsummaryrefslogtreecommitdiffstats
path: root/fs/btrfs/ordered-data.c
Commit message (Collapse)AuthorAge
* Btrfs: fix panic when starting bg cache writeout after IO errorFilipe Manana2015-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When waiting for the writeback of block group cache we returned immediately if there was an error during writeback without waiting for the ordered extent to complete. This left a short time window where if some other task attempts to start the writeout for the same block group cache it can attempt to add a new ordered extent, starting at the same offset (0) before the previous one is removed from the ordered tree, causing an ordered tree panic (calls BUG()). This normally doesn't happen in other write paths, such as buffered writes or direct IO writes for regular files, since before marking page ranges dirty we lock the ranges and wait for any ordered extents within the range to complete first. Fix this by making btrfs_wait_ordered_range() not return immediately if it gets an error from the writeback, waiting for all ordered extents to complete first. This issue happened often when running the fstest btrfs/088 and it's easy to trigger it by running in a loop until the panic happens: for ((i = 1; i <= 10000; i++)) do ./check btrfs/088 ; done [17156.862573] BTRFS critical (device sdc): panic in ordered_data_tree_panic:70: Inconsistency in ordered tree at offset 0 (errno=-17 Object already exists) [17156.864052] ------------[ cut here ]------------ [17156.864052] kernel BUG at fs/btrfs/ordered-data.c:70! (...) [17156.864052] Call Trace: [17156.864052] [<ffffffffa03876e3>] btrfs_add_ordered_extent+0x12/0x14 [btrfs] [17156.864052] [<ffffffffa03787e2>] run_delalloc_nocow+0x5bf/0x747 [btrfs] [17156.864052] [<ffffffffa03789ff>] run_delalloc_range+0x95/0x353 [btrfs] [17156.864052] [<ffffffffa038b7fe>] writepage_delalloc.isra.16+0xb9/0x13f [btrfs] [17156.864052] [<ffffffffa038d75b>] __extent_writepage+0x129/0x1f7 [btrfs] [17156.864052] [<ffffffffa038da5a>] extent_write_cache_pages.isra.15.constprop.28+0x231/0x2f4 [btrfs] [17156.864052] [<ffffffff810ad2af>] ? __module_text_address+0x12/0x59 [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa038df76>] extent_writepages+0x4b/0x5c [btrfs] [17156.864052] [<ffffffff81144431>] ? kmem_cache_free+0x9b/0xce [17156.864052] [<ffffffffa0376a46>] ? btrfs_submit_direct+0x3fc/0x3fc [btrfs] [17156.864052] [<ffffffffa0389cd6>] ? free_extent_state+0x8c/0xc1 [btrfs] [17156.864052] [<ffffffffa0374871>] btrfs_writepages+0x28/0x2a [btrfs] [17156.864052] [<ffffffff8110c4c8>] do_writepages+0x23/0x2c [17156.864052] [<ffffffff81102f36>] __filemap_fdatawrite_range+0x5a/0x61 [17156.864052] [<ffffffff81102f6e>] filemap_fdatawrite_range+0x13/0x15 [17156.864052] [<ffffffffa0383ef7>] btrfs_fdatawrite_range+0x21/0x48 [btrfs] [17156.864052] [<ffffffffa03ab89e>] __btrfs_write_out_cache.isra.14+0x2d9/0x3a7 [btrfs] [17156.864052] [<ffffffffa03ac1ab>] ? btrfs_write_out_cache+0x41/0xdc [btrfs] [17156.864052] [<ffffffffa03ac1fd>] btrfs_write_out_cache+0x93/0xdc [btrfs] [17156.864052] [<ffffffffa0363847>] ? btrfs_start_dirty_block_groups+0x13a/0x2b2 [btrfs] [17156.864052] [<ffffffffa03638e6>] btrfs_start_dirty_block_groups+0x1d9/0x2b2 [btrfs] [17156.864052] [<ffffffff8107d33d>] ? trace_hardirqs_on+0xd/0xf [17156.864052] [<ffffffffa037209e>] btrfs_commit_transaction+0x130/0x9c9 [btrfs] [17156.864052] [<ffffffffa034c748>] btrfs_sync_fs+0xe1/0x12d [btrfs] Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix fsync race leading to ordered extent memory leaksFilipe Manana2015-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can have multiple fsync operations against the same file during the same transaction and they can collect the same ordered extents while they don't complete (still accessible from the inode's ordered tree). If this happens, those ordered extents will never get their reference counts decremented to 0, leading to memory leaks and inode leaks (an iput for an ordered extent's inode is scheduled only when the ordered extent's refcount drops to 0). The following sequence diagram explains this race: CPU 1 CPU 2 btrfs_sync_file() btrfs_sync_file() mutex_lock(inode->i_mutex) btrfs_log_inode() btrfs_get_logged_extents() --> collects ordered extent X --> increments ordered extent X's refcount btrfs_submit_logged_extents() mutex_unlock(inode->i_mutex) mutex_lock(inode->i_mutex) btrfs_sync_log() btrfs_wait_logged_extents() --> list_del_init(&ordered->log_list) btrfs_log_inode() btrfs_get_logged_extents() --> Adds ordered extent X to logged_list because at this point: list_empty(&ordered->log_list) && test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags) == 0 --> Increments ordered extent X's refcount --> check if ordered extent's io is finished or not, start it if necessary and wait for it to finish --> sets bit BTRFS_ORDERED_LOGGED on ordered extent X's flags and adds it to trans->ordered btrfs_sync_log() finishes btrfs_submit_logged_extents() btrfs_log_inode() finishes mutex_unlock(inode->i_mutex) btrfs_sync_file() finishes btrfs_sync_log() btrfs_wait_logged_extents() --> Sees ordered extent X has the bit BTRFS_ORDERED_LOGGED set in its flags --> X's refcount is untouched btrfs_sync_log() finishes btrfs_sync_file() finishes btrfs_commit_transaction() --> called by transaction kthread for e.g. btrfs_wait_pending_ordered() --> waits for ordered extent X to complete --> decrements ordered extent X's refcount by 1 only, corresponding to the increment done by the fsync task ran by CPU 1 In the scenario of the above diagram, after the transaction commit, the ordered extent will remain with a refcount of 1 forever, leaking the ordered extent structure and preventing the i_count of its inode from ever decreasing to 0, since the delayed iput is scheduled only when the ordered extent's refcount drops to 0, preventing the inode from ever being evicted by the VFS. Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to mean that an ordered extent is already being processed by an fsync call, which will attach it to the current transaction, preventing it from being collected by subsequent fsync operations against the same inode. This race was introduced with the following change (added in 3.19 and backported to stable 3.18 and 3.17): Btrfs: make sure logged extents complete in the current transaction V3 commit 50d9aa99bd35c77200e0e3dd7a72274f8304701f I ran into this issue while running xfstests/generic/113 in a loop, which failed about 1 out of 10 runs with the following warning in dmesg: [ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]() [ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo ppy e1000 scsi_mod [last unloaded: btrfs] [ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1 [ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8 [ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000 [ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068 [ 2612.463163] Call Trace: [ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65 [ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb [ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs] [ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c [ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs] [ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs] [ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs] [ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26 [ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs] [ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba [ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs] [ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef [ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e [ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs] [ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50 [ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43 [ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78 [ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14 [ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc [ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b [ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17 [ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]--- [ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day... Kmemleak confirmed the ordered extent leak (and btrfs inode specific structures such as delayed nodes): $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff880154290db0 (size 576): comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s) hex dump (first 32 bytes): 01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N.... 00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88014ef11db0 (size 576): comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s) hex dump (first 32 bytes): 02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800336feda8 (size 584): comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s) hex dump (first 32 bytes): 00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B.... 00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ backtrace: [<ffffffff8114eb34>] create_object+0x172/0x29a [<ffffffff8141d790>] kmemleak_alloc+0x25/0x41 [<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18 [<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198 [<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs] [<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs] [<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs] [<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47 [<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36 [<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs] [<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d [<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs] [<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e [<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff [<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12 [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 CC: <stable@vger.kernel.org> # 3.19, 3.18 and 3.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: collect only the necessary ordered extents on ranged fsyncFilipe Manana2014-11-21
| | | | | | | | | Instead of collecting all ordered extents from the inode's ordered tree and then wait for all of them to complete, just collect the ones that overlap the fsync range. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: make sure logged extents complete in the current transaction V3Josef Bacik2014-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Liu Bo pointed out that my previous fix would lose the generation update in the scenario I described. It is actually much worse than that, we could lose the entire extent if we lose power right after the transaction commits. Consider the following write extent 0-4k log extent in log tree commit transaction < power fail happens here ordered extent completes We would lose the 0-4k extent because it hasn't updated the actual fs tree, and the transaction commit will reset the log so it isn't replayed. If we lose power before the transaction commit we are save, otherwise we are not. Fix this by keeping track of all extents we logged in this transaction. Then when we go to commit the transaction make sure we wait for all of those ordered extents to complete before proceeding. This will make sure that if we lose power after the transaction commit we still have our data. This also fixes the problem of the improperly updated extent generation. Thanks, cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: add helper btrfs_fdatawrite_rangeFilipe Manana2014-11-20
| | | | | | | | To avoid duplicating this double filemap_fdatawrite_range() call for inodes with async extents (compressed writes) so often. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix task hang under heavy compressed writeLiu Bo2014-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has been reported and discussed for a long time, and this hang occurs in both 3.15 and 3.16. Btrfs now migrates to use kernel workqueue, but it introduces this hang problem. Btrfs has a kind of work queued as an ordered way, which means that its ordered_func() must be processed in the way of FIFO, so it usually looks like -- normal_work_helper(arg) work = container_of(arg, struct btrfs_work, normal_work); work->func() <---- (we name it work X) for ordered_work in wq->ordered_list ordered_work->ordered_func() ordered_work->ordered_free() The hang is a rare case, first when we find free space, we get an uncached block group, then we go to read its free space cache inode for free space information, so it will file a readahead request btrfs_readpages() for page that is not in page cache __do_readpage() submit_extent_page() btrfs_submit_bio_hook() btrfs_bio_wq_end_io() submit_bio() end_workqueue_bio() <--(ret by the 1st endio) queue a work(named work Y) for the 2nd also the real endio() So the hang occurs when work Y's work_struct and work X's work_struct happens to share the same address. A bit more explanation, A,B,C -- struct btrfs_work arg -- struct work_struct kthread: worker_thread() pick up a work_struct from @worklist process_one_work(arg) worker->current_work = arg; <-- arg is A->normal_work worker->current_func(arg) normal_work_helper(arg) A = container_of(arg, struct btrfs_work, normal_work); A->func() A->ordered_func() A->ordered_free() <-- A gets freed B->ordered_func() submit_compressed_extents() find_free_extent() load_free_space_inode() ... <-- (the above readhead stack) end_workqueue_bio() btrfs_queue_work(work C) B->ordered_free() As if work A has a high priority in wq->ordered_list and there are more ordered works queued after it, such as B->ordered_func(), its memory could have been freed before normal_work_helper() returns, which means that kernel workqueue code worker_thread() still has worker->current_work pointer to be work A->normal_work's, ie. arg's address. Meanwhile, work C is allocated after work A is freed, work C->normal_work and work A->normal_work are likely to share the same address(I confirmed this with ftrace output, so I'm not just guessing, it's rare though). When another kthread picks up work C->normal_work to process, and finds our kthread is processing it(see find_worker_executing_work()), it'll think work C as a collision and skip then, which ends up nobody processing work C. So the situation is that our kthread is waiting forever on work C. Besides, there're other cases that can lead to deadlock, but the real problem is that all btrfs workqueue shares one work->func, -- normal_work_helper, so this makes each workqueue to have its own helper function, but only a wraper pf normal_work_helper. With this patch, I no long hit the above hang. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: disable strict file flushes for renames and truncatesChris Mason2014-08-15
| | | | | | | | | | | | | | | | | | | | | | Truncates and renames are often used to replace old versions of a file with new versions. Applications often expect this to be an atomic replacement, even if they haven't done anything to make sure the new version is fully on disk. Btrfs has strict flushing in place to make sure that renaming over an old file with a new file will fully flush out the new file before allowing the transaction commit with the rename to complete. This ordering means the commit code needs to be able to lock file pages, and there are a few paths in the filesystem where we will try to end a transaction with the page lock held. It's rare, but these things can deadlock. This patch removes the ordered flushes and switches to a best effort filemap_flush like ext4 uses. It's not perfect, but it should fix the deadlocks. Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix abnormal long waiting in fsyncLiu Bo2014-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | xfstests generic/127 detected this problem. With commit 7fc34a62ca4434a79c68e23e70ed26111b7a4cf8, now fsync will only flush data within the passed range. This is the cause of the above problem, -- btrfs's fsync has a stage called 'sync log' which will wait for all the ordered extents it've recorded to finish. In xfstests/generic/127, with mixed operations such as truncate, fallocate, punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will mmap, and then msync. And I find that msync will wait for quite a long time (about 20s in my case), thanks to ftrace, it turns out that the previous fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants, there can be some ordered extents created but not getting corresponding pages flushed, then they're left in memory until we fsync which runs into the stage 'sync log', and fsync will just wait for the system writeback thread to flush those pages and get ordered extents finished, so the latency is inevitable. This adds a flush similar to btrfs_start_ordered_extent() in btrfs_wait_logged_extents() to fix that. Reviewed-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <clm@fb.com>
* btrfs: remove stale newlines from log messagesDavid Sterba2014-06-09
| | | | | | | | I've noticed an extra line after "use no compression", but search revealed much more in messages of more critical levels and rare errors. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: split the global ordered extents mutexMiao Xie2014-03-10
| | | | | | | | | | | | | | When we create a snapshot, we just need wait the ordered extents in the source fs/file root, but because we use the global mutex to protect this ordered extents list of the source fs/file root to avoid accessing a empty list, if someone got the mutex to access the ordered extents list of the other fs/file root, we had to wait. This patch splits the above global mutex, now every fs/file root has its own mutex to protect its own list. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
* Btrfs: wake up the tasks that wait for the io earlierMiao Xie2014-03-10
| | | | | | | | | The tasks that wait for the IO_DONE flag just care about the io of the dirty pages, so it is better to wake up them immediately after all the pages are written, not the whole process of the io completes. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
* Btrfs: fix early enospc due to the race of the two ordered extent waitMiao Xie2014-03-10
| | | | | | | | | | btrfs_wait_ordered_roots() moves all the list entries to a new list, and then deals with them one by one. But if the other task invokes this function at that time, it would get a empty list. It makes the enospc error happens more early. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
* btrfs: Cleanup the "_struct" suffix in btrfs_workequeueQu Wenruo2014-03-10
| | | | | | | | | | | | | | Since the "_struct" suffix is mainly used for distinguish the differnt btrfs_work between the original and the newly created one, there is no need using the suffix since all btrfs_workers are changed into btrfs_workqueue. Also this patch fixed some codes whose code style is changed due to the too long "_struct" suffix. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
* btrfs: Replace fs_info->flush_workers with btrfs_workqueue.Qu Wenruo2014-03-10
| | | | | | | | | Replace the fs_info->submit_workers with the newly created btrfs_workqueue. Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com> Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com>
* Btrfs: don't mix the ordered extents of all files together during logging ↵Miao Xie2014-03-10
| | | | | | | | | | | | | | | | | | the inodes There was a problem in the old code: If we failed to log the csum, we would free all the ordered extents in the log list including those ordered extents that were logged successfully, it would make the log committer not to wait for the completion of the ordered extents. This patch doesn't insert the ordered extents that is about to be logged into a global list, instead, we insert them into a local list. If we log the ordered extents successfully, we splice them with the global list, or we will throw them away, then do full sync. It can also reduce the lock contention and the traverse time of list. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fb.com>
* Btrfs: convert printk to btrfs_ and fix BTRFS prefixFrank Holton2014-01-28
| | | | | | | | | | Convert all applicable cases of printk and pr_* to the btrfs_* macros. Fix all uses of the BTRFS prefix. Signed-off-by: Frank Holton <fholton@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: avoid unnecessary ordered extent cache resetsFilipe David Borba Manana2014-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After an ordered extent completes, don't blindly reset the inode's ordered tree last accessed ordered extent pointer. While running the xfstests I noticed that about 29% of the time the ordered extent to which tree->last pointed was not the same as our just completed ordered extent. After that I ran the following sysbench test (after a prepare phase) and noticed that about 68% of the time tree->last pointed to a different ordered extent too. sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=rndwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --max-requests=0 run Therefore reset tree->last on ordered extent removal only if it pointed to the ordered extent we're removing from the tree. Results from 4 runs of the following test before and after applying this patch: $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync prepare $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync run Before this path: run 1 - 64.049Mb/sec run 2 - 63.455Mb/sec run 3 - 64.656Mb/sec run 4 - 63.833Mb/sec After this patch: run 1 - 66.149Mb/sec run 2 - 68.459Mb/sec run 3 - 66.338Mb/sec run 4 - 66.176Mb/sec With random writes (--file-test-mode=rndwr) I had huge fluctuations on the results (+- 35% easily). Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
* Btrfs: fix list delete warning when removing ordered root from the listMiao Xie2013-11-20
| | | | | | | | | | | | | | Commit b02441999efcc6152b87cd58e7970bb7843f76cf "Btrfs: don't wait for the completion of all the ordered extents" introduced a bug that broke the ordered root list: WARNING: CPU: 1 PID: 7119 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() It is because we forgot to return the roots in the splice list to the ordered list of the fs. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: don't wait for ordered data outside desired rangeFilipe David Borba Manana2013-11-20
| | | | | | | | | | | In btrfs_wait_ordered_range(), if we found an extent to the left of the start of our desired wait range and the last byte of that extent is 1 less than the desired range's start, we would would wait for the IO completion of that extent unnecessarily. Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: don't wait for the completion of all the ordered extentsMiao Xie2013-11-11
| | | | | | | | | | | It is very likely that there are lots of ordered extents in the filesytem, if we wait for the completion of all of them when we want to reclaim some space for the metadata space reservation, we would be blocked for a long time. The performance would drop down suddenly for a long time. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: take ordered root lock when removing ordered operations inodeJosef Bacik2013-11-11
| | | | | | | | | A user reported a list corruption warning from btrfs_remove_ordered_extent, it is because we aren't taking the ordered_root_lock when we remove the inode from the ordered operations list. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: return an error from btrfs_wait_ordered_rangeJosef Bacik2013-11-11
| | | | | | | | | | | I noticed that if the free space cache has an error writing out it's data it won't actually error out, it will just carry on. This is because it doesn't check the return value of btrfs_wait_ordered_range, which didn't actually return anything. So fix this in order to keep us from making free space cache look valid when it really isnt. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: btrfs_add_ordered_operation: Fix last modified transaction comparison.chandan2013-11-11
| | | | | | | | | Comparison of an inode's last modified transaction with the last committed transaction is incorrect. Fix it. Signed-off-by: chandan <chandan@linux.vnet.ibm.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: kill delay_iput arg to the wait_ordered functionsJosef Bacik2013-09-21
| | | | | | | | | | | This is a left over of how we used to wait for ordered extents, which was to grab the inode and then run filemap flush on it. However if we have an ordered extent then we already are holding a ref on the inode, and we just use btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on the inode to start work on the ordered extent. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: allow partial ordered extent completionJosef Bacik2013-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | We currently have this problem where you can truncate pages that have not yet been written for an ordered extent. We do this because the truncate will be coming behind to clean us up anyway so what's the harm right? Well if truncate fails for whatever reason we leave an orphan item around for the file to be cleaned up later. But if the user goes and truncates up the file and tries to read from the area that had been discarded previously they will get a csum error because we never actually wrote that data out. This patch fixes this by allowing us to either discard the ordered extent completely, by which I mean we just free up the space we had allocated and not add the file extent, or adjust the length of the file extent we write. We do this by setting the length we truncated down to in the ordered extent, and then we set the file extent length and ram bytes to this length. The total disk space stays unchanged since we may be compressed and we can't just chop off the disk space, but at least this way the file extent only points to the valid data. Then when the file extent is free'd the extent and csums will be freed normally. This patch is needed for the next series which will give us more graceful recovery of failed truncates. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: Remove superfluous casts from u64 to unsigned long longGeert Uytterhoeven2013-09-01
| | | | | | | | | u64 is "unsigned long long" on all architectures now, so there's no need to cast it when formatting it using the "ll" length modifier. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: fix heavy delalloc related deadlockJosef Bacik2013-09-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I added a patch where we started taking the ordered operations mutex when we waited on ordered extents. We need this because we splice the list and process it, so if a flusher came in during this scenario it would think the list was empty and we'd usually get an early ENOSPC. The problem with this is that this lock is used in transaction committing. So we end up with something like this Transaction commit -> wait on writers Delalloc flusher -> run_ordered_operations (holds mutex) ->wait for filemap-flush to do its thing flush task -> cow_file_range ->wait on btrfs_join_transaction because we're commiting some other task -> commit_transaction because we notice trans->transaction->flush is set -> run_ordered_operations (hang on mutex) We need to disentangle the ordered operations flushing from the delalloc flushing, since they are separate things. This solves the deadlock issue I was seeing. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: remove btrfs_sector_sum structureMiao Xie2013-07-02
| | | | | | | | | | | | | | | | | | | | Using the structure btrfs_sector_sum to keep the checksum value is unnecessary, because the extents that btrfs_sector_sum points to are continuous, we can find out the expected checksums by btrfs_ordered_sum's bytenr and the offset, so we can remove btrfs_sector_sum's bytenr. After removing bytenr, there is only one member in the structure, so it makes no sense to keep the structure, just remove it, and use a u32 array to store the checksum value. By this change, we don't use the while loop to get the checksums one by one. Now, we can get several checksum value at one time, it improved the performance by ~74% on my SSD (31MB/s -> 54MB/s). test command: # dd if=/dev/zero of=/mnt/btrfs/file0 bs=1M count=1024 oflag=sync Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: introduce per-subvolume ordered extent listMiao Xie2013-06-14
| | | | | | | | The reason we introduce per-subvolume ordered extent list is the same as the per-subvolume delalloc inode list. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: improve the performance of the csums lookupMiao Xie2013-05-06
| | | | | | | | | | | | | | It is very likely that there are several blocks in bio, it is very inefficient if we get their csums one by one. This patch improves this problem by getting the csums in batch. According to the result of the following test, the execute time of __btrfs_lookup_bio_sums() is down by ~28%(300us -> 217us). # dd if=<mnt>/file of=/dev/null bs=1M count=1024 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: hold the ordered operations mutex when waiting on ordered extentsJosef Bacik2013-03-28
| | | | | | | | | | We need to hold the ordered_operations mutex while waiting on ordered extents since we splice and run the ordered extents list. We need to make sure anybody else who wants to wait on ordered extents does actually wait for them to be completed. This will keep us from bailing out of flushing in case somebody is already waiting on ordered extents to complete. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: place ordered operations on a per transaction listJosef Bacik2013-02-20
| | | | | | | | | | | | | | | | | | Miao made the ordered operations stuff run async, which introduced a deadlock where we could get somebody (sync) racing in and committing the transaction while a commit was already happening. The new committer would try and flush ordered operations which would hang waiting for the commit to finish because it is done asynchronously and no longer inherits the callers trans handle. To fix this we need to make the ordered operations list a per transaction list. We can get new inodes added to the ordered operation list by truncating them and then having another process writing to them, so this makes it so that anybody trying to add an ordered operation _must_ start a transaction in order to add itself to the list, which will keep new inodes from getting added to the ordered operations list after we start committing. This should fix the deadlock and also keeps us from doing a lot more work than we need to during commit. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: don't traverse the ordered operation list repeatedlyMiao Xie2013-02-20
| | | | | | | | | | btrfs_run_ordered_operations() needn't traverse the ordered operation list repeatedly, it is because the transaction commiter will invoke it again when there is no other writer in this transaction, it can ensure that no one can add new objects into the ordered operation list. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: wait on ordered extents at the last possible momentJosef Bacik2013-02-20
| | | | | | | | | | | Since we don't actually copy the extent information from the source tree in the fast case we don't need to wait for ordered io to be completed in order to fsync, we just need to wait for the io to be completed. So when we're logging our file just attach all of the ordered extents to the log, and then when the log syncs just wait for IO_DONE on the ordered extents and then write the super. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: fix possible stale data exposureJosef Bacik2013-02-05
| | | | | | | | | | | | We specifically do not update the disk i_size if there are ordered extents outstanding for any area between the current disk_i_size and our ordered extent so that we do not expose stale data. The problem is the check we have only checks if the ordered extent starts at or after the current disk_i_size, which doesn't take into account an ordered extent that starts before the current disk_i_size and ends past the disk_i_size. Fix this by checking if the extent ends past the disk_i_size. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: fix missing i_size updateJosef Bacik2013-02-05
| | | | | | | | | | | | If we have an ordered extent before the ordered extent we are currently completing that is after the current disk_i_size we will put our i_size update into that ordered extent so that we do not expose stale data. The problem is that if our disk i_size is updated past the previous ordered extent we won't update the i_size with the pending i_size update. So check the pending i_size update and if its above the current disk i_size we need to go ahead and try to update. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* Btrfs: cleanup for btrfs_wait_order_rangeLiu Bo2012-12-12
| | | | | | | Variable 'found' is no more used. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: make ordered extent be flushed by multi-taskMiao Xie2012-12-11
| | | | | | | | | Though the process of the ordered extents is a bit different with the delalloc inode flush, but we can see it as a subset of the delalloc inode flush, so we also handle them by flush workers. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: make ordered operations be handled by multi-taskMiao Xie2012-12-11
| | | | | | | | The process of the ordered operations is similar to the delalloc inode flush, so we handle them by flush workers. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
* Btrfs: kill obsolete arguments in btrfs_wait_ordered_extentsLiu Bo2012-10-04
| | | | | | nocow_only is now an obsolete argument. Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
* Btrfs: use a slab for ordered extents allocationMiao Xie2012-10-01
| | | | | | | | | | | | | | The ordered extent allocation is in the fast path of the IO, so use a slab to improve the speed of the allocation. "Size of the struct is 280, so this will fall into the size-512 bucket, giving 8 objects per page, while own slab will pack 14 objects into a page. Another benefit I see is to check for leaked objects when the module is removed (and the cache destroy takes place)." -- David Sterba Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
* Btrfs: fix file extent discount problem in the, snapshotMiao Xie2012-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a snapshot is created while we are writing some data into the file, the i_size of the corresponding file in the snapshot will be wrong, it will be beyond the end of the last file extent. And btrfsck will report: root 256 inode 257 errors 100 Steps to reproduce: # mkfs.btrfs <partition> # mount <partition> <mnt> # cd <mnt> # dd if=/dev/zero of=tmpfile bs=4M count=1024 & # for ((i=0; i<4; i++)) > do > btrfs sub snap . $i > done This because the algorithm of disk_i_size update is wrong. Though there are some ordered extents behind the current one which we use to update disk_i_size, it doesn't mean those extents will be dealt with in the same transaction. So We shouldn't use the offset of those extents to update disk_i_size. Or we will get the wrong i_size in the snapshot. We fix this problem by recording the max real i_size. If we find there is a ordered extent which is in front of the current one and doesn't complete, we will record the end of the current one into that ordered extent. Surely, if the current extent holds the end of other extent(it must be greater than the current one because it is behind the current one), we will record the number that the current extent holds. In this way, we can exclude the ordered extents that may not be dealth with in the same transaction, and be easy to know the real disk_i_size. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
* btrfs: nuke pdflush from commentsArtem Bityutskiy2012-08-04
| | | | | | | | | | The pdflush thread is long gone, so this patch removes references to pdflush from btrfs comments. Cc: Chris Mason <chris.mason@fusionio.com> Cc: linux-btrfs@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Btrfs: call filemap_fdatawrite twice for compressionJosef Bacik2012-06-14
| | | | | | | | | | | | | | | | I removed this in an earlier commit and I was wrong. Because compression can return from filemap_fdatawrite() without having actually set any of it's pages as writeback() it can make filemap_fdatawait() do essentially nothing, and then we won't find any ordered extents because they may not have been created yet. So not only does this make fsync() completely useless, but it will also screw up if you truncate on a non-page aligned offset since we zero out the end and then wait on ordered extents and then call drop caches. We can drop the cache before the io completes and then we try to unpin the extent we just wrote we won't find it and everything goes sideways. So fix this by putting it back and put a giant comment there to keep me from trying to remove it in the future. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
* Btrfs: finish ordered extents in their own threadJosef Bacik2012-05-30
| | | | | | | | | | | | | | We noticed that the ordered extent completion doesn't really rely on having a page and that it could be done independantly of ending the writeback on a page. This patch makes us not do the threaded endio stuff for normal buffered writes and direct writes so we can end page writeback as soon as possible (in irq context) and only start threads to do the ordered work when it is actually done. Compression needs to be reworked some to take advantage of this as well, but atm it has to do a find_get_page in its endio handler so it must be done in its own thread. This makes direct writes quite a bit faster. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
* Btrfs: do not check delalloc when updating disk_i_sizeJosef Bacik2012-05-30
| | | | | | | | | | | | | | | | | | | | | We are checking delalloc to see if it is ok to update the i_size. There are 2 cases it stops us from updating 1) If there is delalloc between our current disk_i_size and this ordered extent 2) If there is delalloc between our current ordered extent and the next ordered extent These tests are racy however since we can set delalloc for these ranges at any time. Also for the first case if we notice there is delalloc between disk_i_size and our ordered extent we will not update disk_i_size and assume that when that delalloc bit gets written out it will update everything properly. However if we crash before that we will have file extents outside of our i_size, which is not good, so this test is dangerous as well as racy. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
* Btrfs: remove useless waiting and extra filemap workJosef Bacik2012-05-30
| | | | | | | | | | | | | | | | | | | | | | | In btrfs_wait_ordered_range we have been calling filemap_fdata_write() twice because compression does strange things and then waiting. Then we look up ordered extents and if we find any we will always schedule_timeout(); once and then loop back around and do it all again. We will even check to see if there is delalloc pages on this range and loop again. So this patch gets rid of the multipe fdata_write() calls and just does filemap_write_and_wait(). In the case of compression we will still find the ordered extents and start those individually if we need to so that is ok, but in the normal buffered case we avoid all this weird overhead. Then in the case of the schedule_timeout(1), we don't need it. All callers either 1) don't care, they just want to make sure what they just wrote maeks it to disk or 2) are doing the lock()->lookup ordered->unlock->flush thing in which case it will lock and check for ordered extents _anyway_ so get back to them as quickly as possible. The delaloc check is simply not needed, this only catches the case where we write to the file again since doing the filemap_write_and_wait() and if the caller truly cares about that it will take care of everything itself. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
* btrfs: return void in functions without error conditionsJeff Mahoney2012-03-21
| | | | Signed-off-by: Jeff Mahoney <jeffm@suse.com>
* btrfs: Panic on bad rbtree operationsJeff Mahoney2012-03-21
| | | | | | | | | The ordered data and relocation trees have BUG_ONs to protect against bad tree operations. This patch replaces them with a panic that will report the problem. Signed-off-by: Jeff Mahoney <jeffm@suse.com>
* Btrfs: add initial tracepoint support for btrfsliubo2011-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-16 13:29:35 -0500