aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* wl12xx: fix passive and radar channel generation for scheduled scanLuciano Coelho2011-05-31
| | | | | | | | | | We were comparing bitwise AND results with a boolean, so when the boolean was set to true, it was not matching as it should. Fix this by booleanizing the bitwise AND results with !!. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Set command sequence number later to ensure consistencyDaniel Drake2011-05-31
| | | | | | | | | | | | | | | | | Before this patch, the command sequence number is being set before lbs_queue_cmd() adds the command to the queue. However, lbs_queue_cmd() sometimes forces commands to queue-jump (e.g. CMD_802_11_WAKEUP_CONFIRM). It currently does this without considering that sequence numbers might need adjusting to keep things running in order. Fix this by setting the sequence number at a later stage, just before we're actually submitting the command to the hardware. Also fixes a possible race where seqnum was being modified outside of the driver lock. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge ↵John W. Linville2011-05-27
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| * ath9k: Fix AR9287 calibrationAdrian Chadd2011-05-27
| | | | | | | | | | | | | | | | | | | | The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd <adrian@freebsd.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * wireless: Default to 'n' for 2 new added devices in Kconfig.Tao Ma2011-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl4965: fix 5GHz operationStanislaw Gruszka2011-05-27
| | | | | | | | | | | | | | | | rx_status.band is used uninitialized, what disallow to work on 5GHz . Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: set 40 Mhz rate only if hw is configured in ht40Rajkumar Manoharan2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k_hw: disable phy restart on baseband panic caused by RXSMRajkumar Manoharan2011-05-26
| | | | | | | | | | | | | | | | | | | | While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Reset chip on baseband hangRajkumar Manoharan2011-05-26
| | | | | | | | | | | | | | | | | | Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: N-PHY: initialize last var in calibration functionRafał Miłecki2011-05-26
| | | | | | | | | | | | Reported-by: Larry Finger <larry.finger@lwfinger.net> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtlwifi: Use order 2 RX buffer allocation only if necessaryLarry Finger2011-05-26
| | | | | | | | | | | | | | | | | | | | Although a previous fix handles the kernel panics that result from failure to allocate a new RX buffer, memory fragmentation can be reduced if the amsdu_8k capability is disabled as new buffers need only be of O(0), not O(2). Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtlwifi: Fix kernel panic resulting from RX buffer allocation failureLarry Finger2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To handle amsdu_8k capability, the PCI routine of this driver must allocate receive buffers of order 2. Under heavy load, this causes fragmentation of memory. The present code releases the current buffer before checking to see if a new one is availble. Recovery from allocation failures is not possible, which results in kernel panics. The fix is to reorder the code to check that a new buffer can be allocated before the old one is released. If not possible, the received frame is dropped and the old one is reused. Without this change, it is impossible to transfer a 2 GB file without a kernel panic. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [2.6.{37,38,39}] Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwifiex: correct event header lengthYogesh Ashok Powar2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While decoding received event packet from firmware, 4 bytes of interface header are already removed unconditionally. So for handling event only 4 more bytes needs to be pulled. This is achieved by changing event header length to 4. Almost all the events, except BA stream related and AMSDU aggregation control events, do not have the payload in their event skb. Such events handling depends only on the event ID. This event ID is the first four bytes of the event skb, which is copied to a separate variable before pulling the skb header. Hence event handling worked only for those events that didn't have payload in event skb. This patch fixes the broken event path of the events with payload in their event skb without harming existing working event path for the events without payload. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | bonding: cleanup module option descriptionsAndy Gospodarek2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan <panweiping3@gmail.com>. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> CC: Weiping Pan <panweiping3@gmail.com> Reviewed-by: Weiping Pan <panweiping3@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: davinci_emac: fix dev_err use at probeJohan Hovold2011-05-26
| | | | | | | | | | | | | | | | | | | | | | | | Use platform device rather than net device in dev_err calls before net device has been registered to avoid messages such as (null): DaVinci EMAC: Failed to get EMAC clock Also replace remaining printks in probe with dev_{err,warn}. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: documentation and code cleanup for resend_igmpFlavio Leitner2011-05-25
| | | | | | | | | | | | | | | | | | Improves the documentation about how IGMP resend parameter works, fix two missing checks and coding style issues. Signed-off-by: Flavio Leitner <fbl@redhat.com> Acked-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bonding: prevent deadlock on slave store with alb mode (v3)Neil Horman2011-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This soft lockup was recently reported: [root@dell-per715-01 ~]# echo +bond5 > /sys/class/net/bonding_masters [root@dell-per715-01 ~]# echo +eth1 > /sys/class/net/bond5/bonding/slaves bonding: bond5: doing slave updates when interface is down. bonding bond5: master_dev is not up in bond_enslave [root@dell-per715-01 ~]# echo -eth1 > /sys/class/net/bond5/bonding/slaves bonding: bond5: doing slave updates when interface is down. BUG: soft lockup - CPU#12 stuck for 60s! [bash:6444] CPU 12: Modules linked in: bonding autofs4 hidp rfcomm l2cap bluetooth lockd sunrpc be2d Pid: 6444, comm: bash Not tainted 2.6.18-262.el5 #1 RIP: 0010:[<ffffffff80064bf0>] [<ffffffff80064bf0>] .text.lock.spinlock+0x26/00 RSP: 0018:ffff810113167da8 EFLAGS: 00000286 RAX: ffff810113167fd8 RBX: ffff810123a47800 RCX: 0000000000ff1025 RDX: 0000000000000000 RSI: ffff810123a47800 RDI: ffff81021b57f6f8 RBP: ffff81021b57f500 R08: 0000000000000000 R09: 000000000000000c R10: 00000000ffffffff R11: ffff81011d41c000 R12: ffff81021b57f000 R13: 0000000000000000 R14: 0000000000000282 R15: 0000000000000282 FS: 00002b3b41ef3f50(0000) GS:ffff810123b27940(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00002b3b456dd000 CR3: 000000031fc60000 CR4: 00000000000006e0 Call Trace: [<ffffffff80064af9>] _spin_lock_bh+0x9/0x14 [<ffffffff886937d7>] :bonding:tlb_clear_slave+0x22/0xa1 [<ffffffff8869423c>] :bonding:bond_alb_deinit_slave+0xba/0xf0 [<ffffffff8868dda6>] :bonding:bond_release+0x1b4/0x450 [<ffffffff8006457b>] __down_write_nested+0x12/0x92 [<ffffffff88696ae4>] :bonding:bonding_store_slaves+0x25c/0x2f7 [<ffffffff801106f7>] sysfs_write_file+0xb9/0xe8 [<ffffffff80016b87>] vfs_write+0xce/0x174 [<ffffffff80017450>] sys_write+0x45/0x6e [<ffffffff8005d28d>] tracesys+0xd5/0xe0 It occurs because we are able to change the slave configuarion of a bond while the bond interface is down. The bonding driver initializes some data structures only after its ndo_open routine is called. Among them is the initalization of the alb tx and rx hash locks. So if we add or remove a slave without first opening the bond master device, we run the risk of trying to lock/unlock a spinlock that has garbage for data in it, which results in our above softlock. Note that sometimes this works, because in many cases an unlocked spinlock has the raw_lock parameter initialized to zero (meaning that the kzalloc of the net_device private data is equivalent to calling spin_lock_init), but thats not true in all cases, and we aren't guaranteed that condition, so we need to pass the relevant spinlocks through the spin_lock_init function. Fix it by moving the spin_lock_init calls for the tx and rx hashtable locks to the ndo_init path, so they are ready for use by the bond_store_slaves path. Change notes: v2) Based on conversation with Jay and Nicolas it seems that the ability to enslave devices while the bond master is down should be safe to do. As such this is an outlier bug, and so instead we'll just initalize the errant spinlocks in the init path rather than the open path, solving the problem. We'll also remove the warnings about the bond being down during enslave operations, since it should be safe v3) Fix spelling error Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: jtluka@redhat.com CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: nicolas.2p.debian@gmail.com CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Add Fujitsu 1000base-SX PCI ID to tg3Meelis Roos2011-05-25
| | | | | | | | | | | | | | | | | | | | This patch adds the PCI ID of Fujitsu 1000base-SX NIC to tg3 driver. Tested to detect the card, MAC and serdes, not tested with link at the moment since I have no fiber switch here. I did not add new constants to the pci_ids.h header file since these constants are used only here. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
* | bnx2x: protect sequence increment with mutexDmitry Kravkov2011-05-25
| | | | | | | | | | | | Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | isdn: netjet - blacklist Digium TDM400PPrarit Bhargava2011-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [2nd try ... 1st attempt didn't make it to netdev mailing list] A quick google search reveals that people with this card are blacklisting it in the initramfs and in the module blacklist based on a statement that it is unsupported. Since the older Digium is also unsupported I'm pretty confident that this newer card is also not supported. lspci -xxx -vv shows 04:07.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0003 P. ----8<---- The Asterisk Voice Card, DIGIUM TDM400P is unsupported by the netjet driver. Blacklist it like the Digium X100P/X101P card. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | via-velocity: don't annotate MAC registers as packedUlrich Hecht2011-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On ARM, memory accesses through packed pointers behave in unexpected ways in GCC releases 4.3 and higher; see https://lkml.org/lkml/2011/2/2/163 for discussion. In this particular case, 32-bit I/O registers are accessed bytewise, causing incorrect setting of the DMA address registers which in turn leads to an error interrupt storm that brings the system to a halt. Since the mac_regs structure does not need any packing anyway, this patch simply removes the attribute to fix the issue. Signed-off-by: Ulrich Hecht <uli@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | xen: netfront: hold RTNL when updating features.Ian Campbell2011-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Konrad reports: [ 0.930811] RTNL: assertion failed at /home/konrad/ssd/linux/net/core/dev.c (5258) [ 0.930821] Pid: 22, comm: xenwatch Not tainted 2.6.39-05193-gd762f43 #1 [ 0.930825] Call Trace: [ 0.930834] [<ffffffff8143bd0e>] __netdev_update_features+0xae/0xe0 [ 0.930840] [<ffffffff8143dd41>] netdev_update_features+0x11/0x30 [ 0.930847] [<ffffffffa0037105>] netback_changed+0x4e5/0x800 [xen_netfront] [ 0.930854] [<ffffffff8132a838>] xenbus_otherend_changed+0xa8/0xb0 [ 0.930860] [<ffffffff8157ca99>] ? _raw_spin_unlock_irqrestore+0x19/0x20 [ 0.930866] [<ffffffff8132adfe>] backend_changed+0xe/0x10 [ 0.930871] [<ffffffff8132875a>] xenwatch_thread+0xba/0x180 [ 0.930876] [<ffffffff810a8ba0>] ? wake_up_bit+0x40/0x40 [ 0.930881] [<ffffffff813286a0>] ? split+0xf0/0xf0 [ 0.930886] [<ffffffff810a8646>] kthread+0x96/0xa0 [ 0.930891] [<ffffffff815855a4>] kernel_thread_helper+0x4/0x10 [ 0.930896] [<ffffffff815846b3>] ? int_ret_from_sys_call+0x7/0x1b [ 0.930901] [<ffffffff8157cf61>] ? retint_restore_args+0x5/0x6 [ 0.930906] [<ffffffff815855a0>] ? gs_change+0x13/0x13 This update happens in xenbus watch callback context and hence does not already hold the rtnl. Take the lock as necessary. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-davem' of ↵David S. Miller2011-05-25
|\ \ | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * | Merge ↵John W. Linville2011-05-24
| |\| | | | | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
| | * iwlagn: dbg_fixed_rate only used when CONFIG_MAC80211_DEBUGFS enabledWey-Yi Guy2011-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix compiling error when CONFIG_MAC80211_DEBUGFS is not enabled drivers/net/wireless/iwlwifi/iwl-agn-rs.c:351: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' drivers/net/wireless/iwlwifi/iwl-agn-rs.c:1076: error: 'struct iwl_lq_sta' has no member named 'dbg_fixed_rate' Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: use PS wakeup before REG_READMohammed Shafi Shajakhan2011-05-19
| | | | | | | | | | | | | | | | | | | | | otherwise we will get deadbeef when the station is in idle state Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: implement .tx_last_beacon()Felix Fietkau2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: read PHY info only when needed (for PHY-A)Rafał Miłecki2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | We risk reading TMSHIGH register twice, but PHY-A are really rare and we do not support them at the moment. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: separate ssb core resetRafał Miłecki2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: add helper for finding GPIO deviceRafał Miłecki2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: dma: cache translation (routing bits)Rafał Miłecki2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: make b43_wireless_init less bus specificRafał Miłecki2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * b43: add helpers for block R/W opsRafał Miłecki2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: fix ad-hoc nexttbtt calculationFelix Fietkau2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rounding up the delta between last-beacon-tsf and tsf to intval is wrong and can lead to misconfigured timers which breaks beacon transmission. Fix this by adding intval and subtracting the offset of the tsf within the current slot. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k: Drag the driver to the year 2011Sujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath_hw: Fix bssid mask documentationMohammed Shafi Shajakhan2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix packet timeoutSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The WMI tx status event timeout was not aligning with the TX cleanup timer threshold value. Fix this to handle dropped packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Change credit limit for UB94/95Sujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | Reduce the credit size for UB94/95 to fix target hangs. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix max subframe handlingSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix BSSID calculationSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix RX filter calculationSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | Choose the MY_BEACON filter only in case of a single interface. Also, set the ATH9K_RX_FILTER_MCAST_BCAST_ALL filter in case of interfaces. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Recalculate the BSSID mask on interfaceSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix station flagsSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * ath9k_htc: Fix mode selectionSujith Manoharan2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * iwlwifi: remove unused parameter from iwl_hcmd_queue_reclaimDaniel Halperin2011-05-19
| | | | | | | | | | | | | | | | | | | | | cmd_index is never used. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: adjust high/low water marks for tx_pending queueMarc Yang2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is to fix an issue that the throughput of the higher priority stream gets dropped when a lower priority stream is present. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: CPU mips optimization with NO_PKT_PRIO_TIDMarc Yang2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we go through the entire for loop in mwifiex_wmm_get_highest_priolist_ptr() and don't find any packets, set highest_queued_prio to NO_PKT_PRIO_TID (< LOW_PRIO_TID). Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: check mwifiex_wmm_lists_empty() before dequeueMarc Yang2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | add checks to mwifiex_wmm_process_tx() loop so it doesn't re-enter mwifiex_dequeue_tx_packet() to find it can't send. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: reduce CPU usage by tracking highest_queued_prioMarc Yang2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds highest_queued_prio to track priority of packets as they are enqueued so that mwifiex_wmm_get_highest_priolist_ptr() starts checking at the first level where we have packets, instead of the highest. The function also lowers priority value to the level where first packet is found. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * mwifiex: reduce CPU usage by tracking tx_pkts_queuedMarc Yang2011-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds tx_pkts_queued to track number of packets being enqueued & dequeued so that mwifiex_wmm_lists_empty() evaluation is lightweight. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-12 01:24:28 -0500