aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* atlx: move modinfo data from atlx.h to atl1.cAlex Chiang2009-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both atl1.c and atl2.c include atlx.h, which defines some modinfo stuff. But atl2.c seems like it doesn't want the modinfo data from atlx.h, as it defines its own. Running modinfo on atl2.ko, we get conflicting information: $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com> version: 2.1.3 author: Xiong Huang <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com> Move the modinfo data out of atlx.h and into atl1.c to eliminate the confusion: $ /sbin/modinfo drivers/net/atlx/atl1.ko | egrep "version|description|author" version: 2.1.3 author: Xiong Huang <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com> description: Atheros L1 Gigabit Ethernet Driver $ /sbin/modinfo drivers/net/atlx/atl2.ko | egrep "version|description|author" version: 2.2.3 description: Atheros Fast Ethernet Network Driver author: Atheros Corporation <xiong.huang@atheros.com>, Chris Snook <csnook@redhat.com> Reported-by: Scott Scriven <scott.scriven@hp.com> Signed-off-by: Alex Chiang <achiang@hp.com> Acked-by: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: fix babbling rx error event bugXiaotian Feng2009-05-26
| | | | | | | | | | | Gianfar interrupt handler uses IEVENT_ERR_MASK to check and handle errors. Babbling RX error (IEVENT_BABR) should be included in IEVENT_ERROR_MASK. Otherwise if BABR is raised, it never gets handled nor cleared, and an interrupt storm results. This has been observed to happen on sending a burst of ethernet frames to a gianfar based board. Signed-off-by: Xiaotian Feng <xiaotian.feng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linux-2.6.30.y' of ↵David S. Miller2009-05-26
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
| * wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez2009-05-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
* | r8169: avoid losing MSI interruptsDavid Dillow2009-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow <dave@thedillows.org> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mac8390: fix regression caused during net_device_ops conversionFinn Thain2009-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gianfar: fix BUG under load after introduction of skb recyclingLennert Buytenhek2009-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche <mike@it-loops.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | gigaset: beyond ARRAY_SIZE of iwb->dataRoel Kluin2009-05-21
|/ | | | | Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* wireless: beyond ARRAY_SIZE of intf->crypto_statsRoel Kluin2009-05-20
| | | | | | | | Do not go beyond ARRAY_SIZE of intf->crypto_stats Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: update 5000 ucode support to version 2 of APIJay Sternberg2009-05-20
| | | | | | | | enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* airo: fix airo_get_encode{,ext} buffer overflow like I mean it...John W. Linville2009-05-20
| | | | | | | | "airo: airo_get_encode{,ext} potential buffer overflow" was actually a no-op, due to an unrecognized type overflow in an assignment. Oddly, gcc only seems to tell me about it when using -Wextra...grrr... Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix interpolation with equal power levelsFabio Rossi2009-05-20
| | | | | | | | | When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi <rossi.f@inwind.it> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: do not cancel delayed work inside spin_lock_irqsaveReinette Chatre2009-05-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg <johannes@sipsolutions.net> A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix exp off-by-one when computing OFDM delta slopeForrest Zhang2009-05-20
| | | | | | | | | | | | | | | Commit e8f055f0c3b ("ath5k: Update reset code") subtly changed the code that computes floating point values for the PHY3_TIMING register such that the exponent is off by a decimal point, which can cause problems with OFDM channel operation. get_bitmask_order() actually returns the highest bit set plus one, whereas the previous code wanted the highest bit set. Instead, use ilog2 which is what this code is really calculating. Also check coef_scaled to handle the (invalid) case where we need log2(0). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: fix scanning in AR2424Pavel Roskin2009-05-20
| | | | | | | | | | | | AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* be2net: add two new pci device ids to pci device tableAjit Khaparde2009-05-18
| | | | | Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR?roel kluin2009-05-18
| | | | | | | | FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Ram Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mv643xx_eth: fix PPC DMA breakageGabriel Paubert2009-05-18
| | | | | | | | | | | | | After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert <paubert@iram.es> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bonding: fix link down handling in 802.3ad modeStephen Hemminger2009-05-18
| | | | | | | | | | | | | | One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'linux-2.6.30.y' of ↵David S. Miller2009-05-18
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
| * wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_wsInaky Perez-Gonzalez2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
* | NET: Meth: Fix unsafe mix of irq and non-irq spinlocks.Ralf Baechle2009-05-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [<ffffffff8026388c>] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff802c0954>] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 } ... key at: [<ffffffff80cf93f0>] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 } ... key at: [<ffffffff80cf6ce8>] __key.32424+0x0/0x8 stack backtrace: Call Trace: [<ffffffff8000ed0c>] dump_stack+0x8/0x34 [<ffffffff80060b74>] check_usage+0x470/0x4a0 [<ffffffff80060c34>] check_irq_usage+0x90/0x130 [<ffffffff80061f78>] __lock_acquire+0x12a4/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff80012a0c>] _spin_lock_irqsave+0x60/0x84 [<ffffffff8026388c>] meth_tx+0x48/0x43c [<ffffffff802d3a38>] __qdisc_run+0x150/0x30c [<ffffffff802c0aa8>] dev_queue_xmit+0x334/0x4b0 [<ffffffff804e7e6c>] ip_auto_config+0x8d0/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | mlx4_en: Fix not deleted napi structuresYevgeny Petrilin2009-05-17
| | | | | | | | | | | | | | | | | | Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-05-16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: piix: The Sony TZ90 needs the cable type hardcoding icside: register second channel of version 6 PCB ide-tape: remove back-to-back REQUEST_SENSE detection
| * | piix: The Sony TZ90 needs the cable type hardcodingAlan Cox2009-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Sony TZ90 needs the cable type hardcoding. See bug #12734 Signed-off-by: Alan Cox <alan@linux.intel.com> Reported-by: Jonathan E. Snow <jesnow@uh.edu> [bart: port it from ata_piix to piix and give reporter the proper credit] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | icside: register second channel of version 6 PCBSergei Shtylyov2009-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | The second IDE channel of version 6 PCB is not being registered anymore since the commit 48c3c1072651922ed153bcf0a33ea82cf20df390 (ide: add struct ide_host (take 3)). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | ide-tape: remove back-to-back REQUEST_SENSE detectionTejun Heo2009-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: fix an oops which always triggers ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when checking for back-to-back request sense issues but drive->pc can be NULL and even when it's not NULL, it's not safe to dereference it once the previous command is complete because pc could have been freed or was on stack. Kill back-to-back REQUEST_SENSE detection. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | | Merge branch 'release' of ↵Linus Torvalds2009-05-16
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Idle C-states disabled by max_cstate should not disable the TSC ACPI: idle: fix init-time TSC check regression ACPI processor: reset the throttling state once it's invalid ACPI processor: introduce module parameter processor.ignore_tpc ACPI, i915: build fix ACPI: suspend: restore BM_RLD on resume ACPI: resume: re-enable SCI-enable workaround thermal: fix off-by-1 error in trip point trigger condition eeepc-laptop: unregister_rfkill_notifier on failure asus-laptop: fix input keycode eeepc-laptop: support for super hybrid engine (SHE) eeepc-laptop: Work around rfkill firmware bug eeepc-laptop: report brightness control events via the input layer eeepc-laptop: fix wlan rfkill state change during init ACPI: suspend: don't let device _PS3 failure prevent suspend ACPI: power: update error message ACPI: video: DMI workaround another broken Acer BIOS enabling display brightness ACPICA: use acpi.* modparam namespace ACPI video: dmi check for broken _BQC on Acer Aspire 5720
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| | \ \
| *-----------------. \ \ Merge branches 'release', 'bugzilla-13032', 'bugzilla-13041+', ↵Len Brown2009-05-16
| |\ \ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'bugzilla-13121', 'bugzilla-13165', 'bugzilla-13243', 'bugzilla-13259', 'resume-sci-en-regression', 'thermal-regression', 'tsc-regression' and 'asus-2.6.30' into release
| | | | | | | | | | | * | | eeepc-laptop: unregister_rfkill_notifier on failureCorentin Chary2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If there is a failure during eeepc_hotk_add() we need to remove the acpi_notify_handler. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | | * | | asus-laptop: fix input keycodeCorentin Chary2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KEY_STOP is now KEY_STOPCD It's the correct key to stop a media BTN_EXTRA is now KEY_SCREENLOCK: The laptop manual tells us that this key is for screenlock KEY_TV is now KEY_PROG1 So it can be reported to X server Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/361505 Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | | * | | eeepc-laptop: support for super hybrid engine (SHE)Grigori Goronzy2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The older eeepc-acpi driver allowed to control the SHE performance preset through a ACPI function for just this purpose. SHE underclocks and undervolts the FSB and undervolts the CPU (at preset 2, "powersave"), or slightly overclocks the CPU (at preset 0, "performance"). Preset 1 is the default setting with default clocks and voltage. The new eeepc-laptop driver doesn't support it anymore. The attached patch adds support for it to eeepc-laptop. It's very straight-forward and almost trivial. Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | | * | | eeepc-laptop: Work around rfkill firmware bugAlan Jenkins2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Buggy firmware can change the RFKILL state by itself. This is easily detected. The RFKILL API states that in such cases, we should call rfkill_force_state() to notify the core. I have reported the bug to Asus. I believe this is the right thing to do for robustness, even if this particular firmware bug is fixed. 2) The same bug causes the wireless toggle key to be reported as 0x11 instead of 0x10. 0x11 is otherwise unused, so it should be safe to add this as a new keycode. The bug is triggered by removing the laptop battery while hibernated. On resume, the wireless toggle key causes the firmware to toggle the wireless state itself. (Also, the key is reported as 0x11 when the current wireless state is OFF). This is very poor behaviour because the OS can't predict whether the firmware is controlling the RFKILL state. Without this workaround, the bug means users have to press the wireless toggle key twice to enable, due to the OS/firmware conflict. (Assuming rfkill-input or equivalent is being used). The workaround avoids this. I believe that acpid scripts which toggle the value of the sysfs state file when the toggle key is pressed will be rendered ineffective by the bug, regardless of this workaround. If they simply toggle the state, when the firmware has already toggled it, then you will never see a state change. Tested on "EEEPC 4G" only. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | | * | | eeepc-laptop: report brightness control events via the input layerDarren Salt2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This maps the brightness control events to one of two keys, either KEY_BRIGHTNESSDOWN or KEY_BRIGHTNESSUP, as needed. Some mapping has to be done due to the fact that the BIOS reports them as <base value> + <current brightness index>; the selection is done according to the sign of the change in brightness (if this is 0, no keypress is reported). (Ref. http://lists.alioth.debian.org/pipermail/debian-eeepc-devel/2009-April/002001.html) Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | | * | | eeepc-laptop: fix wlan rfkill state change during initAlan Jenkins2009-05-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When an rfkill device is registered, the rfkill core will change its state to the system default. So we need to prepare for state changes *before* we register it. That means installing the eeepc-specific ACPI callback which handles the hotplug of the wireless network adaptor. This problem doesn't occur during normal operation. You have to 1) Boot with wireless enabled. eeepc-laptop should load automatically. 2) modprobe -r eeepc-laptop 3) modprobe eeepc-laptop On boot, the default rfkill state will be set to enabled. With the current core code, step 2) will disable the wireless. Therefore in step 3), the wireless will change state during registration, from disabled to enabled. But without this fix, the PCI device for the wireless adaptor will not appear. Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | | | * | | | ACPI: Idle C-states disabled by max_cstate should not disable the TSCLen Brown2009-05-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Processor idle power states C2 and C3 stop the TSC on many machines. Linux recognizes this situation and marks the TSC as unstable: Marking TSC unstable due to TSC halts in idle But if those same machines are booted with "processor.max_cstate=1", then there is no need to validate C2 and C3, and no need to disable the TSC, which can be reliably used as a clocksource. Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de>
| | | | | | | | | | * | | | ACPI: idle: fix init-time TSC check regressionLen Brown2009-05-16
| | | | | | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A previous 2.6.30 patch, a71e4917dc0ebbcb5a0ecb7ca3486643c1c9a6e2, (ACPI: idle: mark_tsc_unstable() at init-time, not run-time) erroneously disabled the TSC on systems that did not actually have valid deep C-states. Move the check after the deep-C-states are validated, via new helper, tsc_check_state(), hich replaces tsc_halts_in_c(). Signed-off-by: Len Brown <len.brown@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Frans Pop <elendil@planet.nl>
| | | | | | | | | * / / / thermal: fix off-by-1 error in trip point trigger conditionVladimir Zajac2009-05-14
| | | | | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a regression caused by commit b1569e99c795bf83b4ddf41c4f1c42761ab7f75e "ACPI: move thermal trip handling to generic thermal layer" which accidentally changed trip point trigger condition to temp > trip_temp This patch changes the trigger condition back to temp >= trip_temp Signed-off-by: Vladimir Zajac <eightgraph@gmail.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | | * / / / ACPI: resume: re-enable SCI-enable workaroundLin Ming2009-05-15
| | | | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BIOS bug workaround mistakenly got disabled when we followed the ACPI specification more closely by ignoring OS updates to that bit. (The BIOS is supposed to update SCI_EN, not the OS) http://bugzilla.kernel.org/show_bug.cgi?id=13289 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | * | | | ACPI processor: reset the throttling state once it's invalidZhang Rui2009-05-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the BIOS hands us an invalid throttling state, write a valid state. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | | * | | | ACPI processor: introduce module parameter processor.ignore_tpcZhang Rui2009-05-15
| | | | | | | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce module parameter processor.ignore_tpc. Some laptops are shipped with buggy _TPC, this module parameter is used to to disable the buggy support. http://bugzilla.kernel.org/show_bug.cgi?id=13259 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Tested-by: James Ettle <theholyettlz@googlemail.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | * | | | ACPI: suspend: don't let device _PS3 failure prevent suspendLen Brown2009-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 6328a57401dc5f5cf9931738eb7268fcd8058c49 "Enable PNPACPI _PSx Support, v3" added a call to acpi_bus_set_power(handle, ACPI_STATE_D3) to pnpacpi_disable_resource() before the existing call to evaluate _DIS on the device. This caused suspend to fail on the system in http://bugzilla.kernel.org/show_bug.cgi?id=13243 because the sanity check to verify we entered _PS3 failed on the serial port. As a work-around, that sanity check can be disabled system-wide with "acpi.power_nocheck=1" Or perhaps we should just shrug off the _PS3 failure and carry on with _DIS like we used to -- which is what this patch does. Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | | * | | | ACPI: power: update error messageLen Brown2009-05-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "Transitioning device [%s] to D%d" is not correct. We print this line when we attempted to transition the device, and it failed. So instead, print "Device [%s] failed to transition to D%d\n" This can happen under two conditions: 1. acpi_power_transition() fails when trying to handle the _ON/_OFF for associated power resource. 2. acpi_evaluate_object() on the explicit _PS0/_PS3 for that actual device could fail. this change clarifies, but doesn't fix http://bugzilla.kernel.org/show_bug.cgi?id=13243 Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | * | | | | ACPI, i915: build fixLen Brown2009-05-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/built-in.o: In function `intel_opregion_init': (.text+0x9d540): undefined reference to `acpi_video_register' http://bugzilla.kernel.org/show_bug.cgi?id=13165 Signed-off-by: Len Brown <len.brown@intel.com>
| | | | * | | | | | ACPI: video: DMI workaround another broken Acer BIOS enabling display brightnessLen Brown2009-05-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=13121 Signed-off-by: Len Brown <len.brown@intel.com>
| | | | * | | | | | ACPI video: dmi check for broken _BQC on Acer Aspire 5720Zhang Rui2009-04-24
| | | | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Acer Aspire 5720, _BQC always returns a value 9 smaller than the actual brightness level. Add dmi quirk for this laptop. http://bugzilla.kernel.org/show_bug.cgi?id=13121 Tested-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | * | / / / / ACPICA: use acpi.* modparam namespaceLen Brown2009-05-07
| | | | |/ / / / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add acpi/acpica/*.c to the acpi.* modparam namespace so that any modparams we stick into ACPICA do not expose ACPICA filenames to users. There are currently only two modparams in ACPICA, just recently added for http://bugzilla.kernel.org/show_bug.cgi?id=13041 With this change, they become acpi.gts=1 acpi.bfs=1 rather than hwsleep.gts=1 hwsleep.bfs=1 Signed-off-by: Len Brown <len.brown@intel.com>
| | * / | | | | ACPI: suspend: restore BM_RLD on resumeLen Brown2009-05-15
| | |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 2.6.29, 31878dd86b7df9a147f5e6cc6e07092b4308782b "ACPI: remove BM_RLD access from idle entry path" moved BM_RLD initialization to init-time from run time. But we discovered that some BIOS do not restore BM_RLD after suspend, causing device errors on C3 and C4 after resume. So now the kernel restores BM_RLD. http://bugzilla.kernel.org/show_bug.cgi?id=13032 Signed-off-by: Len Brown <len.brown@intel.com>
* | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-05-15
|\ \ \ \ \ \ \ | |/ / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI MSI: Fix MSI-X with NIU cards PCI: Fix pci-e port driver slot_reset bad default return value
| * | | | | | PCI MSI: Fix MSI-X with NIU cardsMatthew Wilcox2009-05-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NIU device refuses to allow accesses to MSI-X registers before MSI-X is enabled. This patch fixes the problem by moving the read of the mask register to after MSI-X is enabled. Reported-by: David S. Miller <davem@davemloft.net> Tested-by: David S. Miller <davem@davemloft.net> Reviewed-by: David S. Miller <davem@davemloft.net> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-04 16:46:43 -0400