aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* ath9k: Fix monitor mode handlingSujith2010-01-12
| | | | | | | | mac80211 passes appropriate flags indicating whether monitor mode is being used. Use this to set the HW opmode. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add debugfs file for RX errorsSujith2010-01-12
| | | | | | | | | | This file can be used to track frame reception errors. PHY error counts are also added. Location: ath9k/phy#/recv Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix queue handlingSujith2010-01-12
| | | | | | | | | The TX queues have to be stopped during an internal reset. Not handling this would result in packet loss - fix this. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Cleanup init/deinit routinesSujith2010-01-12
| | | | | | | | | The device initialization and termination functions were messy and convoluted. Introduce helper functions to clarify init_softc() and simplify things in general. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Cleanup Powersave flagsSujith2010-01-12
| | | | | | | | sc_flags has slowly become a kitchen sink over time. Move powersave related flags to a separate variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add new file init.cSujith2010-01-12
| | | | | | | | Move initialization/de-initialization related code to this file. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add a new file for GPIOSujith2010-01-12
| | | | | | | | Move all LED/RFKILL/BTCOEX related code to gpio.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: LP-PHY: note and explain specs inconsistencyRafał Miłecki2010-01-12
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: fix sleep related error paths in wl1251_op_bss_info_changed()Kalle Valo2010-01-12
| | | | | | | | | | | In various cases wl1251_op_bss_info_changed() did not call elp_sleep() after an error was noticed. Fix it by using correct goto label. The bug was a theoretical one, in practise it doesn't matter because if commands start returning errors there will be lots of other problems. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: use mac80211 provided channel parameters in scanningKalle Valo2010-01-12
| | | | | | | | The number of channels to be used in scan was hard coded in wl1251. The proper way is to use the channels array provided by mac80211. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: get probe request template from mac80211Kalle Valo2010-01-12
| | | | | | | | Instead of creating the template in driver, get it from mac80211 instead. Thanks to this, three functions can be now removed. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: cleanup scanning codeKalle Valo2010-01-12
| | | | | | | | | | The current scanning code wasn't following the preferred style. Move code related to scan and trigger scan to commans to wl1251_cmd.c. Because there's now less code in wl1251_hw_scan(), the function can be now merged with wl1251_op_hw_scan(). Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1251: get PS Poll and Nullfunc templates from mac80211Kalle Valo2010-01-12
| | | | | | | | Now that mac80211 creates templates for PS Poll and Nullfunc frames, use them instead of creating our own. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Make rt2800_init_led static and don't export it.Gertjan van Wingerde2010-01-12
| | | | | | | | It is only used within the rt2800lib module itself. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Unify rt2800 WPDMA ready waiting functions.Gertjan van Wingerde2010-01-12
| | | | | | | | | The rt2800pci_wait_wpdma_ready and rt2800usb_wait_wpdma_ready functions are exactly the same, so unify them into rt200lib. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: RF3052 is a valid RF chipset for USB devices as well.Gertjan van Wingerde2010-01-12
| | | | | | | | | The RF3052 chipset is now also being integrated onto USB devices, so allow the RF chipset and don't treat it as PCI/SOC only. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Implement mac80211 callback set_coverage_classLukáš Turek2010-01-12
| | | | | | | | | | The callback sets slot time as specified in IEEE 802.11-2007 section 17.3.8.6 (for 20MHz channels only for now) and raises ACK and CTS timeouts accordingly. The values are persistent, they are restored after device reset. Signed-off-by: Lukas Turek <8an@praha12.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Reimplement clock rate to usec conversionLukáš Turek2010-01-12
| | | | | | | | | | | | | | | The original code was correct in 802.11a mode only, 802.11b/g uses different clock rates. The new code uses values taken from FreeBSD HAL and should be correct for all modes including turbo modes. The former rate calculation was used by slope coefficient calculation function ath5k_hw_write_ofdm_timings. However, this function requires the 802.11a values even in 802.11g mode. Thus the use of ath5k_hw_htoclock was replaced by hardcoded values. Possibly the slope coefficient calculation is not related to clock rate at all. Signed-off-by: Lukas Turek <8an@praha12.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix functions for getting/setting slot timeLukáš Turek2010-01-12
| | | | | | | | | | | | | Functions ath5k_hw_get_slot_time and ath5k_hw_set_slot_time were converting microseconds to clocks only for AR5210, although it's needed for all supported devices. The conversion was moved outside the hardware-specific branches. The original code also limited minimum slot time to 9, while turbo modes use 6, this was fixed too. Signed-off-by: Lukas Turek <8an@praha12.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: re-enable ps by default for new single chip familiesLuis R. Rodriguez2010-01-12
| | | | | | | | | | | | | | | | | | | | | | | The newer single chip hardware family of chipsets have not been experiencing issues with power saving set by default with recent fixes merged (even into stable). The remaining issues are only reported with AR5416 and since enabling PS by default can increase power savings considerably best to take advantage of that feature as this has been tested properly. For more details on this issue see the bug report: http://bugzilla.kernel.org/show_bug.cgi?id=14267 We leave AR5416 with PS disabled by default, that seems to require some more work. Cc: stable@kernel.org Cc: Peter Stuge <peter@stuge.se> Cc: Justin P. Mattock <justinmattock@gmail.com> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2010-01-05
|\ | | | | | | | | Conflicts: net/mac80211/iface.c
| * rt2x00: Properly request tx headroom for alignment operations.Gertjan van Wingerde2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rt2x00 drivers may result in a "ieee80211_tx_status: headroom too small" error message when a frame needs to be properly aligned before transmitting it. This is because the space needed to ensure proper alignment isn't requested from mac80211. Fix this by adding sufficient amount of alignment space to the amount of headroom requested for TX frames. Reported-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <ivdoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix LED configuration setting for rt2800.Gertjan van Wingerde2010-01-05
| | | | | | | | | | | | | | | | | | | | | | rt2800_blink_set uses an illegal value to set the LED_CFG_G_LED_MODE field of the LED_CFG register. This field is only 2 bits large, so should be initialized with value that fits. Use default value from the vendor driver. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: use correct headroom for transmissionPavel Roskin2010-01-05
| | | | | | | | | | | | | | | | | | | | | | Use rt2x00dev->ops->extra_tx_headroom, not rt2x00dev->hw->extra_tx_headroom in the tx code, as the later may include other headroom not to be used in the chipset driver. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Fix eeprom checksum check for custom sized eepromsLuis R. Rodriguez2010-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8bf3d79bc401ca417ccf9fc076d3295d1a71dbf5 enabled EEPROM checksum checks to avoid bogus bug reports but failed to address updating the code to consider devices with custom EEPROM sizes. Devices with custom sized EEPROMs have the upper limit size stuffed in the EEPROM. Use this as the upper limit instead of the static default size. In case of a checksum error also provide back the max size and whether or not this was the default size or a custom one. If the EEPROM is busted we add a failsafe check to ensure we don't loop forever or try to read bogus areas of hardware. This closes bug 14874 http://bugzilla.kernel.org/show_bug.cgi?id=14874 Cc: stable@kernel.org Cc: David Quan <david.quan@atheros.com> Cc: Stephen Beahm <stephenbeahm@comcast.net> Reported-by: Joshua Covington <joshuacov@googlemail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: Fix multicast filtering.Benoit Papillault2010-01-04
| | | | | | | | | | | | | | | | | | | | If multicast parameter (as returned by zd_op_prepare_multicast) has changed, no bit in changed_flags is set. To handle this situation, we do not return if changed_flags is 0. If we do so, we will have some issue with IPv6 which uses multicast for link layer address resolution. Signed-off-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl: off by one bugDan Carpenter2010-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tid is used as an array offset. agg = &priv->stations[sta_id].tid[tid].agg; iwl4965_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index); It should be limitted to MAX_TID_COUNT - 1; struct iwl_tid_data tid[MAX_TID_COUNT]; regards, dan carpenter Signed-off-by: Dan Carpenter <error27@gmail.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mwl8k: fix configure_filter() memory leak on errorLennert Buytenhek2010-01-04
| | | | | | | | | | | | | | | | | | If there was an error acquiring the firmware lock in mwl8k_configure_filter(), we would end up leaking the multicast command packet prepared by mwl8k_prepare_multicast(). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix ito64Ming Lei2010-01-04
| | | | | | | | | | | | | | The unit of sizeof() is byte instead of bit, so fix it. The patch can fix debug output of some dma_addr_t variables. Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix Kconfig depends for ATH9K_DEBUGFSDominik Geyer2010-01-04
| | | | | | | | | | | | | | Add missing DEBUG_FS dependency for ATH9K_DEBUGFS in ath9k's Kconfig. Signed-off-by: Dominik D. Geyer <dominik.geyer@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: pass GET_HW_SPEC capability bitmask up the stackLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | This enables HT association and AMPDU in the receive direction for STA firmware images on hardware that supports it. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: trivial rx-only ampdu implementationLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | AMPDU receive doesn't need any special handling, so let's enable this before tackling the transmit side. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: pass in HT capabilities and rates when associatingLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | Pass the AP's MCS rate mask to SET_RATE when associating, and make UPDATE_STADB pass in the peer's HT caps and rates when adding a new hardware station database entry. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: allow setting HT channelsLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: add support for 88w8363 in STA modeLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: fix changed flags handling in mwl8k_bss_info_changed()Lennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | | | | | Previously, mwl8k_bss_info_changed() would refuse to do anything if the 'changed' argument indicated that the association status hadn't changed. Fix this up so that it will allow changing things like the preamble type, the slot time and the CTS-to-self protection method without having to reassociate. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: honor peer rate setLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | | | When calling SET_RATE, SET_AID, or when creating a station database entry for our AP, pass in the AP's rate set instead of just blindly enabling all legacy rates, so as to end up doing the right thing when talking to 11b-only APs. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: move ->peer_id from mwl8k_vif to mwl8k_staLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For STA firmware, move the per-peer hardware station ID to the driver-private part of struct ieee80211_sta, where it belongs. (Since issuing a hardware station database maintenance command sleeps, we can't hold a reference to the ieee80211_sta * across the command, and since we won't know the station ID until after the command completes, we need to re-lookup the sta when the command is done to write the returned station ID back to its driver-private part.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: remove mwl8k_vif::bssid, which is now uselessLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: handle station database update for AP's sta entry via ->sta_notify()Lennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | Inserting and removing a hardware station database entry for the AP when we are in managed mode is currently done in ->bss_info_changed(). To prepare for adding AP mode support, implement the ->sta_notify() driver method, and let that handle inserting and removing the hardware station database entry for our AP instead. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: move struct peer_capability_info to its only userLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: make the tx ring drain status messages somewhat more friendlyLennert Buytenhek2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Old: > phy0: timeout waiting for tx rings to drain (9 -> 5 pkts), retrying > phy0: timeout waiting for tx rings to drain (5 -> 2 pkts), retrying > phy0: tx rings drained New: > phy0: waiting for tx rings to drain (9 -> 5 pkts) > phy0: waiting for tx rings to drain (5 -> 2 pkts) > phy0: tx rings drained Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: prevent freeing free IRQ if ieee80211_register_hw() failsLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: bail out if there is no AP firmware image support for this chipLennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | mwl8k: update version number to 0.11Lennert Buytenhek2010-01-05
| | | | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | iwlwifi: remove linux/utsrelease.h dependencyZhu Yi2010-01-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 250cce26d5d03337aec4ff8405121f026adb4a89 uses UTS_RELEASE as the the in-tree iwlwifi driver version. However the inclusion of generated/utsrelease.h makes it a unpleasant behaviour to recompile the driver everytime when utsrelease.h is updated. In fact, the driver module is already built with the UTS_RELEASE information via vermagic of modinfo. Mark the in-tree driver with the version string "in-tree" to distinguish with those old out-of-tree drivers. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | wl1271: fix timeout in wl1271_top_reg_readJuha Leppanen2010-01-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I noticed a timeout bug in /drivers/net/wireless/wl12xx/wl1271_spi.c In the current code you cannot tell why you exited the "poll for data ready" do-while loop if exiting was done after the last possible loop. Then timeout==0 regardless of (val & OCP_READY_MASK) or !(val & OCP_READY_MASK), leading to possible false timeout... Simple correction could be decreasing timeout after checking for !(val & OCP_READY_MASK), not before (Manually converted from email to an actual patch by me. -- JWL) Reported-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: "Juha Leppanen" <juha_motorsportcom@luukku.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville2009-12-30
|\| | | | | | | | | Conflicts: drivers/net/wireless/libertas/scan.c
| * Revert "b43: Enforce DMA descriptor memory constraints"John W. Linville2009-12-29
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 9bd568a50c446433038dec2a5186c5c57c3dbd23. That commit is shown to cause allocation failures during initialization on some machines. http://bugzilla.kernel.org/show_bug.cgi?id=14844 Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwmc3200wifi: fix array out-of-boundary accessZhu Yi2009-12-28
| | | | | | | | | | | | | | | | | | Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). Cc: stable@kernel.org Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-08 08:50:38 -0500