aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* hwmon: remove use of __devexitBill Pemberton2012-11-28
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: remove use of __devinitdataBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwmon: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Juerg Haefliger <juergh@gmail.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Jim Cromie <jim.cromie@gmail.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Roger Lucas <vt8231@hiddenengine.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* power: remove use of __devexitBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* power: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* power: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Anton Vorontsov <cbou@mail.ru> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwspinlock: remove use of __devexitBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwspinlock: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* hwspinlock: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gpio: remove use of __devexitBill Pemberton2012-11-28
| | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Peter Tyser <ptyser@xes-inc.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gpio: remove use of __devinitconstBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gpio: remove use of __devinitdataBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gpio: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* gpio: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Peter Tyser <ptyser@xes-inc.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: remove use of __devexitBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* clk: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tpm_infineon: remove use of __devexit_pBill Pemberton2012-11-28
| | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Acked-by: Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tpm: remove use of __devinitBill Pemberton2012-11-28
| | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Rajiv Andrade <mail@srajiv.net> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Sirrix AG <tpmdd@sirrix.com> Acked-by: Kent Yoder <key@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: remove CONFIG_HOTPLUG ifdefsBill Pemberton2012-11-28
| | | | | | | | Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* pnpbios: remove CONFIG_HOTPLUG ifdefsBill Pemberton2012-11-28
| | | | | | | | | | Remove conditional code based on CONFIG_HOTPLUG being false. It's always on now in preparation of it going away as an option. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Adam Belay <abelay@mit.edu> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/base/core.c: Mark to_root_device staticJosh Triplett2012-11-26
| | | | | | | Nothing outside of drivers/base/core.c references this function. Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver core: use initcall_debug to control shutdown infoShuoX Liu2012-11-26
| | | | | | | | | | syscore_shutdown uses initcall_debug to control the debug info output. It’s a good programming. But device_shutdown doesn’t. The patch changes device_shutdown to follow the style. Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* driver: platform: fix documentation for platform_get_irq_bynameWolfram Sang2012-11-15
| | | | | | | Probably due to copy&paste, some stuff was simply forgotten. Signed-off-by: Wolfram Sang <wolfram@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware loader: document firmware cache mechanismMing Lei2012-11-14
| | | | | | | | | | | This patch documents the firmware cache mechanism so that users of request_firmware() know that it can be called safely inside device's suspend and resume callback, and the device's firmware needn't be cached any more by individual driver itself to deal with firmware loss during system resume. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware loader: introduce module parameter to customize(v4) fw search pathMing Lei2012-11-14
| | | | | | | | | | | | | | | | This patch introduces one module parameter of 'path' in firmware_class to support customizing firmware image search path, so that people can use its own firmware path if the default built-in paths can't meet their demand[1], and the typical usage is passing the below from kernel command parameter when 'firmware_class' is built in kernel: firmware_class.path=$CUSTOMIZED_PATH [1], https://lkml.org/lkml/2012/10/11/337 Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware: use noinline_for_stackCesar Eduardo Barros2012-11-14
| | | | | | | | | The comment above fw_file_size() suggests it is noinline for stack size reasons. Use noinline_for_stack to make this more clear. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware loader: Fix the concurrent request_firmware() race for kref_get/putChuansheng Liu2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is one race that both request_firmware() with the same firmware name. The race scenerio is as below: CPU1 CPU2 request_firmware() --> _request_firmware_load() return err another request_firmware() is coming --> _request_firmware_cleanup is called --> _request_firmware_prepare --> release_firmware ---> fw_lookup_and_allocate_buf --> spin_lock(&fwc->lock) ... __fw_lookup_buf() return true fw_free_buf() will be called --> ... kref_put --> decrease the refcount to 0 kref_get(&tmp->ref) ==> it will trigger warning due to refcount == 0 __fw_free_buf() --> ... spin_unlock(&fwc->lock) spin_lock(&fwc->lock) list_del(&buf->list) spin_unlock(&fwc->lock) kfree(buf) After that, the freed buf will be used. The key race is decreasing refcount to 0 and list_del is not protected together by fwc->lock, and it is possible another thread try to get it between refcount==0 and list_del. Fix it here to protect it together. Acked-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* firmware loader: Fix the race FW_STATUS_DONE is followed by class_timeoutChuansheng Liu2012-11-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a race as below when calling request_firmware(): CPU1 CPU2 write 0 > loading mutex_lock(&fw_lock) ... set_bit FW_STATUS_DONE class_timeout is coming set_bit FW_STATUS_ABORT complete_all &completion ... mutex_unlock(&fw_lock) In this time, the bit FW_STATUS_DONE and FW_STATUS_ABORT are set, and request_firmware() will return failure due to condition in _request_firmware_load(): if (!buf->size || test_bit(FW_STATUS_ABORT, &buf->status)) retval = -ENOENT; But from the above scenerio, it should be a successful requesting. So we need judge if the bit FW_STATUS_DONE is already set before calling fw_load_abort() in timeout function. As Ming's proposal, we need change the timer into sched_work to benefit from using &fw_lock mutex also. Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Acked-by: Ming Lei <ming.lei@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.7-rc5 into driver-core-nextGreg Kroah-Hartman2012-11-14
|\
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-11-10
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "Bug fixes galore, mostly in drivers as is often the case: 1) USB gadget and cdc_eem drivers need adjustments to their frame size lengths in order to handle VLANs correctly. From Ian Coolidge. 2) TIPC and several network drivers erroneously call tasklet_disable before tasklet_kill, fix from Xiaotian Feng. 3) r8169 driver needs to apply the WOL suspend quirk to more chipsets, fix from Cyril Brulebois. 4) Fix multicast filters on RTL_GIGA_MAC_VER_35 r8169 chips, from Nathan Walp. 5) FDB netlink dumps should use RTM_NEWNEIGH as the message type, not zero. From John Fastabend. 6) Fix smsc95xx tx checksum offload on big-endian, from Steve Glendinning. 7) __inet_diag_dump() needs to repsect and report the error value returned from inet_diag_lock_handler() rather than ignore it. Otherwise if an inet diag handler is not available for a particular protocol, we essentially report success instead of giving an error indication. Fix from Cyrill Gorcunov. 8) When the QFQ packet scheduler sees TSO/GSO packets it does not handle things properly, and in fact ends up corrupting it's datastructures as well as mis-schedule packets. Fix from Paolo Valente. 9) Fix oopser in skb_loop_sk(), from Eric Leblond. 10) CXGB4 passes partially uninitialized datastructures in to FW commands, fix from Vipul Pandya. 11) When we send unsolicited ipv6 neighbour advertisements, we should send them to the link-local allnodes multicast address, as per RFC4861. Fix from Hannes Frederic Sowa. 12) There is some kind of bug in the usbnet's kevent deferral mechanism, but more immediately when it triggers an uncontrolled stream of kernel messages spam the log. Rate limit the error log message triggered when this problem occurs, as sending thousands of error messages into the kernel log doesn't help matters at all, and in fact makes further diagnosis more difficult. From Steve Glendinning. 13) Fix gianfar restore from hibernation, from Wang Dongsheng. 14) The netlink message attribute sizes are wrong in the ipv6 GRE driver, it was using the size of ipv4 addresses instead of ipv6 ones :-) Fix from Nicolas Dichtel." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: gre6: fix rtnl dump messages gianfar: ethernet vanishes after restoring from hibernation usbnet: ratelimit kevent may have been dropped warnings ipv6: send unsolicited neighbour advertisements to all-nodes net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANs usb: gadget: g_ether: fix frame size check for 802.1Q cxgb4: Fix initialization of SGE_CONTROL register isdn: Make CONFIG_ISDN depend on CONFIG_NETDEVICES cxgb4: Initialize data structures before using. af-packet: fix oops when socket is not present pkt_sched: enable QFQ to support TSO/GSO net: inet_diag -- Return error code if protocol handler is missed net: bnx2x: Fix typo in bnx2x driver smsc95xx: fix tx checksum offload for big endian rtnetlink: Use nlmsg type RTM_NEWNEIGH from dflt fdb dump ptp: update adjfreq callback description r8169: allow multicast packets on sub-8168f chipset. r8169: Fix WoL on RTL8168d/8111d. drivers/net: use tasklet_kill in device remove/close process tipc: do not use tasklet_disable before tasklet_kill
| | * gianfar: ethernet vanishes after restoring from hibernationWang Dongsheng2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a gianfar ethernet device is down prior to hibernating a system, it will no longer be present upon system restore. For example: ~# ifconfig eth0 down ~# echo disk > /sys/power/state <trigger a restore from hibernation> ~# ifconfig eth0 up SIOCSIFFLAGS: No such device This happens because the restore function bails out early upon finding devices that were not up at hibernation. In doing so, it never gets to the netif_device_attach call at the end of the restore function. Adding the netif_device_attach as done here also makes the gfar_restore code consistent with what is done in the gfar_resume code. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * usbnet: ratelimit kevent may have been dropped warningsSteve Glendinning2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when something goes wrong, a flood of these messages can be generated by usbnet (thousands per second). This doesn't generally *help* the condition so this patch ratelimits the rate of their generation. There's an underlying problem in usbnet's kevent deferral mechanism which needs fixing, specifically that events *can* get dropped and not handled. This patch doesn't address this, but just mitigates fallout caused by the current implemention. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANsIan Coolidge2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames. URB/skb sizing from usbnet will default to the hard_mtu, so account for the VLAN header by expanding that via hard_header_len Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * usb: gadget: g_ether: fix frame size check for 802.1QIan Coolidge2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | Checking skb->len against ETH_FRAME_LEN assumes a 1514 ethernet frame size. With an 802.1Q VLAN header, ethernet frame length can now be 1518. Validate frame length against that. Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * cxgb4: Fix initialization of SGE_CONTROL registerVipul Pandya2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This only causes an issue on systems that have L1 cache size of 32B, 128B, 512B, 2048B or 4096B. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * isdn: Make CONFIG_ISDN depend on CONFIG_NETDEVICESLee Jones2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It doesn't make much sense to enable ISDN services if you don't intend to connect to a network. Therefore insisting that ISDN depends on NETDEVICES seems logical. We can then remove any guards mentioning NETDEVICES inside all subordinate drivers. This also has the nice side-effect of fixing the warning below when ISDN_I4L && !CONFIG_NETDEVICES at compile time. This patch fixes: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_ioctl’: drivers/isdn/i4l/isdn_common.c:1278:8: warning: unused variable ‘s’ [-Wunused-variable] Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * cxgb4: Initialize data structures before using.Vipul Pandya2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | We should not assume reserve fields to be don't cares as fields may change. Clearing data structures before using. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: bnx2x: Fix typo in bnx2x driverMasanari Iida2012-11-03
| | | | | | | | | | | | | | | | | | | | | Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * smsc95xx: fix tx checksum offload for big endianSteve Glendinning2012-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f7b2927 introduced tx checksum offload support for smsc95xx, and enabled it by default. This feature doesn't take endianness into account, so causes most tx to fail on those platforms. This patch fixes the problem fully by adding the missing conversion. An alternate workaround is to disable TX checksum offload on those platforms. The cpu impact of this feature is very low. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * r8169: allow multicast packets on sub-8168f chipset.Nathan Walp2012-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | RTL_GIGA_MAC_VER_35 includes no multicast hardware filter. Signed-off-by: Nathan Walp <faceprint@faceprint.com> Suggested-by: Hayes Wang <hayeswang@realtek.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * r8169: Fix WoL on RTL8168d/8111d.Cyril Brulebois2012-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This regression was spotted between Debian squeeze and Debian wheezy kernels (respectively based on 2.6.32 and 3.2). More info about Wake-on-LAN issues with Realtek's 816x chipsets can be found in the following thread: http://marc.info/?t=132079219400004 Probable regression from d4ed95d796e5126bba51466dc07e287cebc8bd19; more chipsets are likely affected. Tested on top of a 3.2.23 kernel. Reported-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Tested-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr> Hinted-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * drivers/net: use tasklet_kill in device remove/close processXiaotian Feng2012-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some driver uses tasklet_disable in device remove/close process, tasklet_disable will inc tasklet->count and return. If the tasklet is not handled yet because some softirq pressure, the tasklet will placed on the tasklet_vec, never have a chance to excute. This might lead to ksoftirqd heavy loaded, wakeup with pending_softirq, but tasklet is disabled. tasklet_kill should be used in this case. Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds2012-11-10
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull sparc fixes from David Miller: "Several build/bug fixes for sparc, including: 1) Configuring a mix of static vs. modular sparc64 crypto modules didn't work, remove an ill-conceived attempt to only have to build the device match table for these drivers once to fix the problem. Reported by Meelis Roos. 2) Make the montgomery multiple/square and mpmul instructions actually usable in 32-bit tasks. Essentially this involves providing 32-bit userspace with a way to use a 64-bit stack when it needs to. 3) Our sparc64 atomic backoffs don't yield cpu strands properly on Niagara chips. Use pause instruction when available to achieve this, otherwise use a benign instruction we know blocks the strand for some time. 4) Wire up kcmp 5) Fix the build of various drivers by removing the unnecessary blocking of OF_GPIO when SPARC. 6) Fix unintended regression wherein of_address_to_resource stopped being provided. Fix from Andreas Larsson. 7) Fix NULL dereference in leon_handle_ext_irq(), also from Andreas Larsson." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix build with mix of modular vs. non-modular crypto drivers. sparc: Support atomic64_dec_if_positive properly. of/address: sparc: Declare of_address_to_resource() as an extern function for sparc again sparc32, leon: Check for existent irq_map entry in leon_handle_ext_irq sparc: Add sparc support for platform_get_irq() sparc: Allow OF_GPIO on sparc. qlogicpti: Fix build warning. sparc: Wire up sys_kcmp. sparc64: Improvde documentation and readability of atomic backoff code. sparc64: Use pause instruction when available. sparc64: Fix cpu strand yielding. sparc64: Make montmul/montsqr/mpmul usable in 32-bit threads.
| | * | sparc: Add sparc support for platform_get_irq()Andreas Larsson2012-11-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds sparc support for platform_get_irq that in the normal case use platform_get_resource() to get an irq. This standard approach fails for sparc as there are no resources of type IORESOURCE_IRQ for irqs for sparc. Cross platform drivers can then use this standard platform function and work on sparc instead of having to have a special case for sparc. Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | sparc: Allow OF_GPIO on sparc.David S. Miller2012-11-06
| | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | qlogicpti: Fix build warning.David S. Miller2012-10-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The build warns: drivers/scsi/qlogicpti.c: In function 'qpti_sbus_probe': drivers/scsi/qlogicpti.c:1316:45: warning: passing argument 1 of 'scsi_host_alloc' discards 'const' qualifier from pointer target type [enabled by default] include/scsi/scsi_host.h:778:26: note: expected 'struct scsi_host_template *' but argument is of type 'const struct scsi_host_template *' The problem is that of_device_id->data is a const void pointer. This is pretty silly in this specific instance, because for all matched device IDs we set match->data to the same value, &qpti_template. So just use that directly instead of the unnecessary and improperly typed abstraction. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge tag 'stable/for-linus-3.7-rc5-tag' of ↵Linus Torvalds2012-11-10
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen fixes from Konrad Rzeszutek Wilk: "There are three ARM compile fixes (we forgot to export certain functions and if the drivers are built as an module - we go belly-up). There is also an mismatch of irq_enter() / exit_idle() calls sequence which were fixed some time ago in other piece of codes, but failed to appear in the Xen code. Lastly a fix for to help in the field with troubleshooting in case we cannot get the appropriate parameter and also fallback code when working with very old hypervisors." Bug-fixes: - Fix compile issues on ARM. - Fix hypercall fallback code for old hypervisors. - Print out which HVM parameter failed if it fails. - Fix idle notifier call after irq_enter. * tag 'stable/for-linus-3.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/arm: Fix compile errors when drivers are compiled as modules (export more). xen/arm: Fix compile errors when drivers are compiled as modules. xen/generic: Disable fallback build on ARM. xen/events: fix RCU warning, or Call idle notifier after irq_enter() xen/hvm: If we fail to fetch an HVM parameter print out which flag it is. xen/hypercall: fix hypercall fallback code for very old hypervisors
| | * | | xen/generic: Disable fallback build on ARM.Konrad Rzeszutek Wilk2012-11-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-14 19:04:32 -0500