aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] s390: lcs driver bug fixes and improvements [1/2]Klaus Wacker2006-05-26
| | | | | | | | | | | | | | | | Several problems occured with lcs device driver: - device not operational anymore after cable pull/plug-in. - unpredictable results occured, e.g. kernel panic using cards of type QD8F. - STOPLAN and delete multicast address command were not proper recognized by OSA card under heavy network workload. - channel/device error checks missing in interrupt handler. To fix all problems at once recovery of lcs devices has been improved. missing error checks in lcs interrupt handler has been added. Once a hardware problem occurs lcs will recover the device now properly. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s390: qeth driver fixesUrsula Braun2006-05-26
| | | | | | | | | | | | | | | | | | From: Frank Blaschka <Frank.Blaschka@de.ibm.com> From: Frank Pavlic <fpavlic@de.ibm.com> - fix fake_ll during initial device bringup. fake_ll was not active after first start of the device. Problem only occured when qeth was built without IPV6 support. - avoid skb usage after invocation of qeth_flush_buffers, because skb might already be freed. - remove yet another useless netif_wake_queue in qeth_softsetup_ipv6 since this function is only called when device is going online. In this case card->state will never be in state UP. So let the net_device queue down . Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s390: qeth driver fixesUrsula Braun2006-05-26
| | | | | | | | | | | | From: Frank Pavlic <fpavlic@de.ibm.com> - correct checking of sscanf-%n value in qeth_string_to_ipaddr(). - don't use netif_stop_queue outside the hard_start_xmit routine. Rather use netif_tx_disable. - don't call qeth_netdev_init on a recovery. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] s390: minor fix in cu3088Cornelia Huck2006-05-26
| | | | | | | | In case of a parse error for the cu3088 group attribute, return -EINVAL instead of count. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] pcnet32: remove incorrect pcnet32_free_ringDon Fry2006-05-26
| | | | | | | | | | | | | During a code scan for another change I discovered that this call to pcnet32_free_ring must be removed. If the open fails due to a lack of memory all the ring structures are removed via the call to free_ring and a subsequent call to open will dereference a null pointer in pcnet32_init_ring. Please apply to 2.6.17. Signed-off-by: Don Fry <brazilnut@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* e1000: add shutdown handler back to fix WOLAuke Kok2006-05-26
| | | | | | | | | | | | Someone was waaay too aggressive and removed e1000's reboot notifier instead of porting it to the new way of the shutdown handler. This change broke wake on lan. Add the shutdown handler back in using the same method as e100 uses. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> (cherry picked from c653e6351e371b33b29871e5eedf610ffb3be037 commit)
* Merge branch 'upstream-fixes' of ↵Jeff Garzik2006-05-26
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
| * [PATCH] arlan: fix section mismatch warningsRandy Dunlap2006-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix section mismatch warnings: WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:arlan_probe from .text between 'init_module' (at offset 0x3526) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .init.text:init_arlan_proc from .text between 'init_module' (at offset 0x3539) and 'cleanup_module' WARNING: drivers/net/wireless/arlan.o - Section mismatch: reference to .exit.text:cleanup_arlan_proc from .text between 'cleanup_module' (at offset 0x356c) and 'arlan_diagnostic_info_string' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * [PATCH] wavelan: fix section mismatchRandy Dunlap2006-05-26
| | | | | | | | | | | | | | | | | | | | Fix section mismatch warning: WARNING: drivers/net/wireless/wavelan.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x371e) and 'cleanup_module' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-05-26
|\ \ | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: dev.c comment fixes [IPV6] ROUTE: Don't try less preferred routes for on-link routes. [IRDA]: *_DONGLE should depend on IRTTY_SIR [MAINTAINERS]: Add entry for netem
| * | [IRDA]: *_DONGLE should depend on IRTTY_SIRSamuel Ortiz2006-05-25
| |/ | | | | | | | | | | | | | | | | | | | | | | If a SIR dongle is built in the kernel while IRTTY_SIR is built as a module, kernel compilation will fail. Thus, the SIR dongle config should depend on the IRTTY_SIR. Closes kernel bug# 6512 (http://bugzilla.kernel.org/show_bug.cgi?id=6512) Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] tpm: fix bug for TPM on ThinkPad T60 and Z60Kylene Jo Hall2006-05-26
| | | | | | | | | | | | | | | | | | | | | | | | The TPM chip on the ThinkPad T60 and Z60 machines is returning 0xFFFF for the vendor ID which is a check the driver made to double check it was actually talking to the memory mapped space of a TPM. This patch removes the check since it isn't absolutely necessary and was causing device discovery to fail on these machines. Signed-off-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] scx200_acb: fix section mismatch warningRandy Dunlap2006-05-26
| | | | | | | | | | | | | | | | | | | | WARNING: drivers/i2c/busses/scx200_acb.o - Section mismatch: reference to .init.text: from .text after 'scx200_add_cs553x' (at offset 0x528) Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] s3c24xx: fix spi driver with CONFIG_PMBen Dooks2006-05-26
| | | | | | | | | | | | | | | | | | Fix compile bug with the S3C24XX SPI driver when CONFIG_PM is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] ads7846 conversion accuracyDavid Brownell2006-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This improves accuracy of the touchscreen and hwmon sensor readings, addressing an issue noted by Imre Deak: there's an extra bit written before the sample (12 bits) gets written out. It also catches up to various comments, and makes the /proc/interrupts entry sensible again. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Imre Deak <imre.deak@nokia.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Unlock md devices when stopping them on reboot.Neil Brown2006-05-26
| | | | | | | | | | | | | | otherwise we get nasty messages about locks not being released. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2006-05-26
|\ \ | |/ |/| | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Fix posting lists of 256 receive requests to SRQ for Tavor
| * IB/mthca: Fix posting lists of 256 receive requests to SRQ for TavorMichael S. Tsirkin2006-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | If we post a list of length exactly a multiple of 256, nreq in doorbell gets set to 256 which is wrong: it should be encoded by 0. This is because we only zero it out on the next WR, which may not be there. The solution is to ring the doorbell after posting a WQE, not before posting the next one. This is the same bug that we just fixed for QPs with non-shared RQ. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | [PATCH] V4L/DVB (4045): Fixes recursive dependency for I2CJean Delvare2006-05-24
|/ | | | | | | | | | | | Mixing "depends on I2C" and "select I2C" within the media subsystem leads to the following problem: Warning! Found recursive dependency: I2C DVB_BUDGET DVB_BUDGET_PATCH DVB_AV7110 VIDEO_SAA7146_VV VIDEO_SAA7146 I2C Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2006-05-24
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/ipath: deref correct pointer when using kernel SMA IB/ipath: fix null deref during rdma ops IB/ipath: register as IB device owner IB/ipath: enable PE800 receive interrupts on user ports IB/ipath: enable GPIO interrupt on HT-460 IB/ipath: fix NULL dereference during cleanup IB/ipath: replace uses of LIST_POISON IB/ipath: fix reporting of driver version to userspace IB/ipath: don't modify QP if changes fail IB/ipath: fix spinlock recursion bug
| * IB/ipath: deref correct pointer when using kernel SMABryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | | | At this point, the core QP structure hasn't been initialized, so what's in there isn't valid. Get the same information elsewhere. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: fix null deref during rdma opsBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The problem was that node A's sending thread, which handles sending RDMA read response data, would write the trigger word, the last packet would be sent, node B would send a new RDMA read request, node A's interrupt handler would initialize s_rdma_sge, then node A's sending thread would update s_rdma_sge. This didn't happen very often naturally but was more frequent with 1 byte RDMA reads. Rather than adding more locking or increasing the QP structure size and copying sge data, I modified the copy routine to update the pointers before writing the trigger word to avoid the update race. Signed-off-by: Ralph Campbell <ralphc@pathscale.com> Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: register as IB device ownerBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | This fixes an oops. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: enable PE800 receive interrupts on user portsBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | | | Fixed so it works on the PE-800. It had not previously been updated to match PE-800 receive interrupt differences from HT-400. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: enable GPIO interrupt on HT-460Bryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | This is required for even semi-decent performance on OpenIB. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: fix NULL dereference during cleanupBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | | | Fix NULL deref due to pcidev being clobbered before dd->ipath_f_cleanup() was called. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: replace uses of LIST_POISONBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | Per Andrew's request. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: fix reporting of driver version to userspaceBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | Fix the interface version that gets exported to userspace. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: don't modify QP if changes failBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | Make sure modify_qp won't modify the QP if any of the changes failed. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: fix spinlock recursion bugBryan O'Sullivan2006-05-23
| | | | | | | | | | | | | | | | | | The local loopback path for RC can lock the rkey table lock without blocking interrupts. The receive interrupt path can then call ipath_rkey_ok() and deadlock. Remove the redundant lock. Signed-off-by: Bryan O'Sullivan <bos@pathscale.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2006-05-24
|\ \ | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, x86_64)
| * | [PATCH] libata: add pio flush for via atapi (was: Re: TR: ASUS A8V Deluxe, ↵Albert Lee2006-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | x86_64) Backport the "pio flush" from the libata major update to 2.6.17 for via atapi. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | Merge branch 'upstream-linus' of ↵Linus Torvalds2006-05-24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] sky2: fix jumbo packet support
| * | | [PATCH] sky2: fix jumbo packet supportStephen Hemminger2006-05-24
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | The truncate threshold calculation to prevent receiver from getting stuck was incorrect, and it didn't take into account the upper limit on bits in the register so the jumbo packet support was broken. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* / / [MMC] Fix premature use of md->diskPierre Ossman2006-05-24
|/ / | | | | | | | | | | | | md->disk was being used in a debug message before it was allocated. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | V4L/DVB (4041): Fix compilation on PPC 64Mauro Carvalho Chehab2006-05-23
| | | | | | | | | | | | Those functions don't exist on PPC64 architecture. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | V4L/DVB (4040a): Fix the following section warnings:Jean Delvare2006-05-23
| | | | | | | | | | | | | | | | | | | | reference to .init.text: from .text between 'dvb_bt8xx_probe' (at offset 0x122c) and 'dvb_bt8xx_remove' reference to .init.text: from .text between 'dvb_bt8xx_probe' (at offset 0x1267) and 'dvb_bt8xx_remove' Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | V4L/DVB (4037): Make the bridge devices that depend on I2C dependant on I2CManu Abraham2006-05-23
| | | | | | | | | | | | | | Ref: Bugzilla 6179, 6589 Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | V4L/DVB (3927): Fix VIDEO_DEV=m, VIDEO_V4L1_COMPAT=yAdrian Bunk2006-05-23
|/ | | | | | | | | If CONFIG_VIDEO_DEV=m and CONFIG_VIDEO_V4L1_COMPAT=y, v4l1-compat should be built as a module (currently, it isn't built at all leading to problems with modules using it). Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-05-23
|\ | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: SNMP NAT: fix memory corruption [IRDA]: fixup type of ->lsap_state [IRDA]: fix 16/32 bit confusion [NET]: Fix "ntohl(ntohs" bugs [BNX2]: Use kmalloc instead of array [BNX2]: Fix bug in bnx2_nvram_write() [TG3]: Add some missing rx error counters
| * [BNX2]: Use kmalloc instead of arrayMichael Chan2006-05-22
| | | | | | | | | | | | | | | | Use kmalloc() instead of a local array in bnx2_nvram_write(). Update version to 1.4.40. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [BNX2]: Fix bug in bnx2_nvram_write()Michael Chan2006-05-22
| | | | | | | | | | | | | | Fix a bug in bnx2_nvram_write() caused by a counter variable not correctly incremented by 4. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * [TG3]: Add some missing rx error countersMichael Chan2006-05-22
| | | | | | | | | | | | | | | | | | Add some missing rx error counters for 5705 and newer chips. Update version to 3.58. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] orinoco: possible null pointer dereference in orinoco_rx_monitor()Florin Malita2006-05-23
| | | | | | | | | | | | | | | | | | | | | | | | If the skb allocation fails, the current error path calls dev_kfree_skb_irq() with a NULL argument. Also, 'err' is not being used. Coverity CID: 275. Signed-off-by: Florin Malita <fmalita@gmail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] tty_insert_flip_string_flags() license fixTobias Powalowski2006-05-23
| | | | | | | | | | | | | | | | | | | | | | | | | | We still don't have the tty layer licensing compatibility quite right. tty_insert_flip_char() used to be inlined in include/linux/tty_flip.h. It is now out-of-lined and hence needs EXPORT_SYMBOL() to be back-compatible. One known offender is the Intel Modem driver. Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: fix possible oops when starting a raid0 arrayNeilBrown2006-05-23
|/ | | | | | | | | | | | | | | | | | | | | | | | | This loop that sets up the hash_table has problems. Careful examination will show that the last time through, everything but the first line is pointless. This is because all it does is change 'cur' and 'size' and neither of these are used after the loop. This should ring warning bells... That last time through the loop, size += conf->strip_zone[cur].size can index off the end of the strip_zone array. Depending on what it finds there, it might exit the loop cleanly, or it might spin going further and further beyond the array until it hits an unmapped address. This patch rearranges the code so that the last, pointless, iteration of the loop never happens. i.e. the one statement of the last loop that is needed is moved the the end of the previous loop - or to before the loop starts - and the loop counter starts from 1 instead of 0. Cc: "Don Dupuis" <dondster@gmail.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [SUNSU]: Fix license.Andrew Morton2006-05-21
| | | | | | | FATAL: modpost: GPL-incompatible module sunsu uses the GPL-only symbol tty_insert_flip_string_flags Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2006-05-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (33 commits) V4L/DVB (3965): Fix CONFIG_VIDEO_VIVI=y build bug V4L/DVB (3964): Bt8xx/bttv-cards.c: fix off-by-one errors V4L/DVB (3914): Vivi build fix V4L/DVB (3912): Sparc32 vivi fix V4L/DVB (3832): Get_dvb_firmware: download nxt2002 firmware from new driver location V4L/DVB (3829): Fix frequency values in the ranges structures of the LG TDVS H06xF tuners V4L/DVB (3826): Saa7134: Missing 'break' in Terratec Cinergy 400 TV initialization V4L/DVB (3825): Remove broken 'fast firmware load' from cx25840. V4L/DVB (3819): Cxusb-bluebird: bug-fix: power down corrupts frontend V4L/DVB (3813): Add support for TCL M2523_5N_E tuner. V4L/DVB (3804): Tweak bandselect setup fox cx24123 V4L/DVB (3803): Various correctness fixes to tuning. V4L/DVB (3797): Always wait for diseqc queue to become ready before transmitting a diseqc message V4L/DVB (3796): Add several debug messages to cx24123 code V4L/DVB (3795): Fix for CX24123 & low symbol rates V4L/DVB (3792): Kbuild: DVB_BT8XX must select DVB_ZL10353 V4L/DVB (3790): Use after free in drivers/media/video/em28xx/em28xx-video.c V4L/DVB (3788): Fix compilation with V4L1_COMPAT V4L/DVB (3782): Removed uneeded stuff from pwc Makefile V4L/DVB (3775): Add VIVI Kconfig stuff ...
| * V4L/DVB (3965): Fix CONFIG_VIDEO_VIVI=y build bugIngo Molnar2006-05-12
| | | | | | | | | | | | | | CONFIG_VIDEO_VIVI depends on CONFIG_VIDEO_BUF. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * V4L/DVB (3964): Bt8xx/bttv-cards.c: fix off-by-one errorsAdrian Bunk2006-05-12
| | | | | | | | | | | | | | This patch fixes two off-by-one errors spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-22 01:29:02 -0500