aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds2008-06-21
|\ | | | | | | | | | | | | | | | | | | | | * 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (lm75) sensor reading bugfix hwmon: (abituguru3) update driver detection hwmon: (w83791d) new maintainer hwmon: (abituguru3) Identify Abit AW8D board as such hwmon: Update the sysfs interface documentation hwmon: (adt7473) Initialize max_duty_at_overheat before use hwmon: (lm85) Fix function RANGE_TO_REG()
| * hwmon: (lm75) sensor reading bugfixDavid Brownell2008-06-19
| | | | | | | | | | | | | | | | | | | | LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: (abituguru3) update driver detectionHans de Goede2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: (abituguru3) Identify Abit AW8D board as suchHans de Goede2008-06-19
| | | | | | | | | | | | | | | | | | This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: (adt7473) Initialize max_duty_at_overheat before useJean Delvare2008-06-19
| | | | | | | | | | | | | | | | | | | | data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: (lm85) Fix function RANGE_TO_REG()Jean Delvare2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Justin Thiessen <jthiessen@penguincomputing.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-06-21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: Don't receive new packets in a dead network namespace. sctp: Make sure N * sizeof(union sctp_addr) does not overflow. pppoe: warning fix ipv6: Drop packets for loopback address from outside of the box. ipv6: Remove options header when setsockopt's optlen is 0 mac80211: detect driver tx bugs
| * | pppoe: warning fixStephen Hemminger2008-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-06-20
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management
| * | | BAST: Remove old IDE driverBen Dooks2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | pcmcia ide kingston compactflash's have a new manufacturer idChristophe Niclaes2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | pcmcia: add another pata/ide IDKristoffer Ericson2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | pcmcia: add an pata/ide IDMatt Reimer2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | ide: increase timeout in wait_drive_not_busy()Bartlomiej Zolnierkiewicz2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | palm_bk3710: fix resource managementSergei Shtylyov2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2008-06-20
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: Kconfig menu touch-up firewire: Kconfig menu touch-up firewire: deadline for PHY config transmission firewire: fw-ohci: unify printk prefixes firewire: fill_bus_reset_event needs lock protection firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID firewire: fw-ohci: disable PHY packet reception into AR context firewire: fw-ohci: use of uninitialized data in AR handler firewire: don't panic on invalid AR request buffer
| * | | | ieee1394: Kconfig menu touch-upStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename and reorder some prompts and modify some help texts. The result: -------------------- IEEE 1394 (FireWire) support -------------------- *** Enable only one of the two stacks, unless you know what you are doing *** New FireWire stack, EXPERIMENTAL OHCI-1394 controllers Storage devices (SBP-2 protocol) Stable FireWire stack OHCI-1394 controllers PCILynx controller Storage devices (SBP-2 protocol) Enable replacement for physical DMA in SBP2 IP over 1394 raw1394 userspace interface video1394 userspace interface dv1394 userspace interface (deprecated) Excessive debugging output The old prompts for reference: -------------------- IEEE 1394 (FireWire) support -------------------- IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL Support for OHCI FireWire host controllers Support for storage devices (SBP-2 protocol driver) IEEE 1394 (FireWire) support *** Subsystem Options *** Excessive debugging output *** Controllers *** Texas Instruments PCILynx support OHCI-1394 support *** Protocols *** OHCI-1394 Video support SBP-2 support (Harddisks etc.) Enable replacement for physical DMA in SBP2 IP over 1394 OHCI-DV I/O support (deprecated) Raw IEEE1394 I/O support Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: Kconfig menu touch-upStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: deadline for PHY config transmissionStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the low-level driver failed to initialize a card properly without noticing it, fw-core was blocked indefinitely when trying to send a PHY config packet. This hung up the events kernel thread, e.g. locked up keyboard input. https://bugzilla.redhat.com/show_bug.cgi?id=444694 https://bugzilla.redhat.com/show_bug.cgi?id=446763 This problem was introduced between 2.6.25 and 2.6.26-rc1 by commit 2a0a2590498be7b92e3e76409c9b8ee722e23c8f "firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)". The solution is to wait with timeout. I tested it with 7 different working controllers and 1 non-working controller. On the working ones, the packet callback complete()s usually --- but not always --- before a timeout of 10ms. Hence I chose a safer timeout of 100ms. On the few tests with the non-working controller ALi M5271, PHY config packet transmission always timed out so far. (Fw-ohci needs to be fixed for this controller independently of this deadline fix. Often the core doesn't even attempt to send a phy config because not even self ID reception works.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: fw-ohci: unify printk prefixesStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The messages which can be enabled by fw-ohci's debug module parameter are changed from KERN_DEBUG to KERN_NOTICE level and uniformly prefixed with "firewire_ohci: ". This further simplifies communication with users when we ask them to capture debug messages. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: fill_bus_reset_event needs lock protectionStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Callers of fill_bus_reset_event() have to take card->lock. Otherwise access to node data may oops if node removal is in progress. A lockless alternative would be - event->local_node_id = card->local_node->node_id; + tmp = fw_node_get(card->local_node); + event->local_node_id = tmp->node_id; + fw_node_put(tmp); and ditto with the other node pointers which fill_bus_reset_event() accesses. But I went the locked route because one of the two callers already holds the lock. As a bonus, we don't need the memory barrier anymore because device->generation and device->node_id are written in a card->lock protected section. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
| * | | | firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfIDStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OHCI 1.1 clause 5.10 requires that selfIDBufferPtr is valid when a 1 is written into LinkControl.rcvSelfID. This driver bug has so far not been known to cause harm because most chips obviously accept a later selfIDBufferPtr write, at least before HCControl.linkEnable is written. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Kristian Høgsberg <krh@redhat.com>
| * | | | firewire: fw-ohci: disable PHY packet reception into AR contextStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want the rcvPhyPkt bit in LinkControl off before we start using the chip. However, the spec says that the reset value of it is undefined. Hence switch it explicitly off. https://bugzilla.redhat.com/show_bug.cgi?id=244576#c48 shows that for example the nForce2 integrated FireWire controller seems to have it on by default. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jarod Wilson <jwilson@redhat.com>
| * | | | firewire: fw-ohci: use of uninitialized data in AR handlerStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | header_length and payload_length are filled with random data if an unknown tcode was read from the AR buffer (i.e. if the AR buffer contained invalid data). We still need a better strategy to recover from this, but at least handle_ar_packet now doesn't return out of bound buffer addresses anymore. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * | | | firewire: don't panic on invalid AR request bufferStefan Richter2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BUG() at this place is wrong. (Unless if the low level driver would already do higher-level input validation of incoming request headers.) Invalid incoming requests or bugs in the controller which corrupt the AR-req buffer needlessly crashed the box because this is run in tasklet context. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | | | Merge branch 'release' of ↵Linus Torvalds2008-06-20
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: no AC status notification ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device
| * \ \ \ \ Merge branch 'bugzilla-9761' into releaseLen Brown2008-06-20
| |\ \ \ \ \
| | * | | | | ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach deviceZhang Rui2008-06-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The child of a video bus device is not alway a video device. It should be a warn message rather than an exception here. http://bugzilla.kernel.org/show_bug.cgi?id=9761 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | | | Merge branch 'bugzilla-10695' into releaseLen Brown2008-06-20
| |\ \ \ \ \ \ | | |_|_|/ / / | |/| | | | |
| | * | | | | ACPI: no AC status notificationLen Brown2008-06-14
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=10695 Signed-off-by: Len Brown <len.brown@intel.com>
* | | | | | Merge branch 'drm-patches' of ↵Linus Torvalds2008-06-20
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (21 commits) drm: only trust core drm ioctls - driver ioctls are a mess. drm/i915: add support for Intel series 4 chipsets. drm/radeon: add hier-z registers for r300 and r500 chipsets drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT drm/radeon: switch IGP gart to use radeon_write_agp_base() drm/radeon: Restore sw interrupt on resume drm/r500: add support for AGP based cards. drm/radeon: fix texture uploads with large 3d textures (bug 13980) drm/radeon: add initial r500 support. drm/radeon: init pipe setup in kernel code. drm/radeon: fixup radeon_do_engine_reset drm/radeon: fix pixcache and purge/cache flushing registers drm/radeon: write AGP_BASE_2 on chips that support it. drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support drm/radeon: IGP clean up register and magic numbers. drm/rs690: set base 2 to 0. drm/rs690: set all of gart base address. radeon: add production microcode from AMD drm: pcigart use proper pci map interfaces. drm: the sg alloc ioctl should write back the handle to userspace ...
| * | | | | | drm: only trust core drm ioctls - driver ioctls are a mess.Dave Airlie2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/i915: add support for Intel series 4 chipsets.Zhenyu Wang2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: add hier-z registers for r300 and r500 chipsetsDave Airlie2008-06-18
| | | | | | |
| * | | | | | drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTATAlex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: switch IGP gart to use radeon_write_agp_base()Alex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: Restore sw interrupt on resumeDennis Kasprzyk2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/r500: add support for AGP based cards.Dave Airlie2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: fix texture uploads with large 3d textures (bug 13980)Roland Scheidegger2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: add initial r500 support.Dave Airlie2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: init pipe setup in kernel code.Alex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: fixup radeon_do_engine_resetAlex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: fix pixcache and purge/cache flushing registersAlex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: write AGP_BASE_2 on chips that support it.Alex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 supportAlex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/radeon: IGP clean up register and magic numbers.Alex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/rs690: set base 2 to 0.Dave Airlie2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm/rs690: set all of gart base address.Dave Airlie2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | radeon: add production microcode from AMDAlex Deucher2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | drm: pcigart use proper pci map interfaces.Dave Airlie2008-06-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 01:52:42 -0500