aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* cpmac: bump version to 0.5.2Florian Fainelli2010-03-07
| | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* cpmac: fallback to switch mode if no PHY chip foundFlorian Fainelli2010-03-07
| | | | | | | | | | If we were unable to detect a PHY on any of the MDIO bus id we tried instead of bailing out with -ENODEV, assume the MAC is connected to a switch and use MDIO bus 0. This unbreaks quite a lot of devices out there whose switch cannot be detected. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* cpmac: fix the receiving of 802.1q framesFlorian Fainelli2010-03-07
| | | | | | | | | | Despite what the comment above CPMAC_SKB_SIZE says, the hardware also needs to account for the FCS length in a received frame. This patch fix the receiving of 802.1q frames which have 4 more bytes. While at it unhardcode the definition and use the one from if_vlan.h. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* another pegasus usb net devicePetko Manolov2010-03-07
| | | | | | | | | This one removes trailing whitespace in pegasus.h and more importantly adds new Pegasus compatible device. Signed-off-by: Julian Brown <julian@codesourcery.com> Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* irda-usb: add error handling and fix leakDan Carpenter2010-03-07
| | | | | | | If the call to kcalloc() fails then we should return -ENOMEM. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ems_usb: cleanup: remove uneeded checkDan Carpenter2010-03-07
| | | | | | | | | | | "skb" is alway non-null here, but even if it were null the check isn't needed because dev_kfree_skb() can handle it. This eliminates a smatch warning about dereferencing a variable before checking that it is non-null. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* fix a race in ks8695_pollFigo.zhang2010-03-07
| | | | | | | | fix a race at the end of NAPI processing in ks8695_poll() function. Signed-off-by:Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: Fixing debug messageBreno Leitao2010-03-05
| | | | | | | | | | | | | | Currently s2io is dumping debug messages using the interface name before it was allocated, showing a message like the following: s2io: eth%d: Ring Mem PHY: 0x7ef80000 s2io: s2io_reset: Resetting XFrame card eth%d This patch just fixes it, printing the pci bus information for the card instead of the interface name. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: fix packet corruption and tx hang during NFSv2Jesse Brandeburg2010-03-05
| | | | | | | | | | | | | | when receiving a particular type of NFS v2 UDP traffic, the hardware could DMA some bad data and then hang, possibly corrupting memory. Disable the NFS parsing in this hardware, verified to fix the bug. Originally reported and reproduced by RedHat's Neil Horman CC: nhorman@tuxdriver.com Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* typhoon: fix incorrect use of smp_wmb()David Dillow2010-03-05
| | | | | | | | | The typhoon driver was incorrectly using smp_wmb() to order memory accesses against IO to the NIC in a few instances. Use wmb() instead, which is required to actually order between memory types. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: smc91x: Support Qualcomm MSM development boards.David Brown2010-03-05
| | | | | | | Signed-off-by: David Brown <davidb@quicinc.com> Signed-off-by: Daniel Walker <dwalker@codeaurora.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* rndis_wlan: correct multicast_list handling V3Jiri Pirko2010-03-04
| | | | | | | | | | | My previous patch (655ffee284dfcf9a24ac0343f3e5ee6db85b85c5) added locking in a bad way. Because rndis_set_oid can sleep, there is need to prepare multicast addresses into local buffer under netif_addr_lock first, then call rndis_set_oid outside. This caused reorganizing of the whole function. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: fix hot plug removal crashDivy Le Ray2010-03-04
| | | | | | | | queue restart tasklets need to be stopped after napi handlers are stopped since the latter can restart them. So stop them after stopping napi. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Fix TX ring processing on SMP machinesAnton Vorontsov2010-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with commit a3bc1f11e9b867a4f49505 ("gianfar: Revive SKB recycling") gianfar driver sooner or later stops transmitting any packets on SMP machines. start_xmit() prepares new skb for transmitting, generally it does three things: 1. sets up all BDs (marks them ready to send), except the first one. 2. stores skb into tx_queue->tx_skbuff so that clean_tx_ring() would cleanup it later. 3. sets up the first BD, i.e. marks it ready. Here is what clean_tx_ring() does: 1. reads skbs from tx_queue->tx_skbuff 2. checks if the *last* BD is ready. If it's still ready [to send] then it it isn't transmitted, so clean_tx_ring() returns. Otherwise it actually cleanups BDs. All is OK. Now, if there is just one BD, code flow: - start_xmit(): stores skb into tx_skbuff. Note that the first BD (which is also the last one) isn't marked as ready, yet. - clean_tx_ring(): sees that skb is not null, *and* its lstatus says that it is NOT ready (like if BD was sent), so it cleans it up (bad!) - start_xmit(): marks BD as ready [to send], but it's too late. We can fix this simply by reordering lstatus/tx_skbuff writes. Reported-by: Martyn Welch <martyn.welch@ge.com> Bisected-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Tested-by: Martyn Welch <martyn.welch@ge.com> Cc: Sandeep Gopalpet <Sandeep.Kumar@freescale.com> Cc: Stable <stable@vger.kernel.org> [2.6.33] Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: use correct barrier between cacheable and non-cacheable memoryDavid Dillow2010-03-04
| | | | | | | | | | | | r8169 needs certain writes to be visible to other CPUs or the NIC before touching the hardware, but was using smp_wmb() which is only required to order cacheable memory access. Switch to wmb() which is required to order both cacheable and non-cacheable memory. Noticed by Catalin Marinas and Paul Mackerras. Signed-off-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-03-04
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * rt2x00: Export rt2x00soc_probe from rt2x00socHelmut Schaa2010-03-03
| | | | | | | | | | | | | | | | | | | | | | Export rt2x00soc_probe from rt2x00soc as it is used in rt2800pci. Otherwise loading rt2800pci gives "rt2800pci: Unknown symbol rt2x00soc_probe". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: Fix HT rate control configurationSujith2010-03-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Handling HT configuration changes involved setting the channel with the new HT parameters and then issuing a rate_update() notification to the driver. This behavior changed after the off-channel changes. Now, the channel is not updated with the new HT params in enable_ht() - instead, it is now done when the scan work terminates. This results in the driver depending on stale information, defaulting to non-HT mode always. Fix this by passing the new channel type to the driver. Cc: stable@kernel.org Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: load firmware asynchronously before mac80211 registrationJohannes Berg2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the wireless summit in Portland we discussed a way of loading firmware asynchronously from ->probe() before registration to mac80211, in order to register with the wireless subsystems with complete information in cases where firmware is required to know parameters. This is not yet the case in iwlwifi, but for some new features we're working on it will be the case since those will only be supported by new firmware images. Hence, to start with, convert iwlwifi to load firmware asynchronously from probe, unbinding the device when firmware loading fails, and only registering with the wireless subsystems after firmware has been loaded successfully. Future patches will hook into this to register the new firmware capabilities, depending on the firmware API version. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ar9170: load firmware asynchronouslyJohannes Berg2010-03-02
| | | | | | | | | | | | | | | | | | | | | | This converts ar9170 to load firmware asynchronously out of ->probe() and only register with mac80211 when all firmware has been loaded successfully. If, on the other hand, any firmware fails to load, it will now unbind from the device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: fix rt2800pci compilation with SoCHelmut Schaa2010-03-02
| | | | | | | | | | | | | | | | | | | | Compiling rt2800pci with CONFIG_RT2800PCI_SOC fails with "... rt2880pci.c: error: incompatible type for argument 2 of 'rt2x00soc_probe'". Fix this by using &rt2800pci_ops instead of rt2800pci_ops. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Add USB ID for CEIVA adapter to rt73usbBryan Polk2010-03-02
| | | | | | | | | | | | | | | | | | This adds support for CEIVA USB wireless adapters to the rt73usb driver. Signed-off-by: Bryan Polk <sainth@eidolons.org> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: fix lockdep warning when unloading moduleMing Lei2010-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since txq->axq_lock may be hold in softirq context, it must be acquired with spin_lock_bh() instead of spin_lock() if softieq is enabled. The patch fixes the lockdep warning below when unloading ath9k modules. ================================= [ INFO: inconsistent lock state ] 2.6.33-wl #12 --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. rmmod/3642 [HC0[0]:SC0[0]:HE1:SE1] takes: (&(&txq->axq_lock)->rlock){+.?...}, at: [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] {IN-SOFTIRQ-W} state was registered at: [<ffffffff8107577d>] __lock_acquire+0x2f6/0xd35 [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffff813a7486>] _raw_spin_lock_bh+0x3b/0x6e [<ffffffffa0356b49>] spin_lock_bh+0xe/0x10 [ath9k] [<ffffffffa0358ec7>] ath_tx_tasklet+0xcd/0x391 [ath9k] [<ffffffffa0354f5f>] ath9k_tasklet+0x70/0xc8 [ath9k] [<ffffffff8104e601>] tasklet_action+0x8c/0xf4 [<ffffffff8104f459>] __do_softirq+0xf8/0x1cd [<ffffffff8100ab1c>] call_softirq+0x1c/0x30 [<ffffffff8100c2cf>] do_softirq+0x4b/0xa3 [<ffffffff8104f045>] irq_exit+0x4a/0x8c [<ffffffff813acccc>] do_IRQ+0xac/0xc3 [<ffffffff813a7d53>] ret_from_intr+0x0/0x16 [<ffffffff81302d52>] cpuidle_idle_call+0x9e/0xf8 [<ffffffff81008be7>] cpu_idle+0x62/0x9d [<ffffffff81391c1a>] rest_init+0x7e/0x80 [<ffffffff818bbd38>] start_kernel+0x3e8/0x3f3 [<ffffffff818bb2bc>] x86_64_start_reservations+0xa7/0xab [<ffffffff818bb3b8>] x86_64_start_kernel+0xf8/0x107 irq event stamp: 42037 hardirqs last enabled at (42037): [<ffffffff813a7b21>] _raw_spin_unlock_irqrestore+0x47/0x56 hardirqs last disabled at (42036): [<ffffffff813a72f4>] _raw_spin_lock_irqsave+0x2b/0x88 softirqs last enabled at (42000): [<ffffffffa0353ea6>] spin_unlock_bh+0xe/0x10 [ath9k] softirqs last disabled at (41998): [<ffffffff813a7463>] _raw_spin_lock_bh+0x18/0x6e other info that might help us debug this: 4 locks held by rmmod/3642: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8132c10d>] rtnl_lock+0x17/0x19 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffffa01e53f2>] cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] #2: (&ifmgd->mtx){+.+.+.}, at: [<ffffffffa0260834>] ieee80211_mgd_deauth+0x3f/0x17e [mac80211] #3: (&local->sta_mtx){+.+.+.}, at: [<ffffffffa025a381>] sta_info_destroy_addr+0x2b/0x5e [mac80211] stack backtrace: Pid: 3642, comm: rmmod Not tainted 2.6.33-wl #12 Call Trace: [<ffffffff81074469>] valid_state+0x178/0x18b [<ffffffff81014f94>] ? save_stack_trace+0x2f/0x4c [<ffffffff81074e08>] ? check_usage_backwards+0x0/0x88 [<ffffffff8107458f>] mark_lock+0x113/0x230 [<ffffffff810757f1>] __lock_acquire+0x36a/0xd35 [<ffffffff8101018d>] ? native_sched_clock+0x2d/0x5f [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff81076289>] lock_acquire+0xcd/0xf1 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffff813a7193>] _raw_spin_lock+0x36/0x69 [<ffffffffa03568c3>] ? ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffffa03568c3>] ath_tx_node_cleanup+0x62/0x180 [ath9k] [<ffffffff810749ed>] ? trace_hardirqs_on+0xd/0xf [<ffffffffa0353950>] ath9k_sta_remove+0x22/0x26 [ath9k] [<ffffffffa025a08f>] __sta_info_destroy+0x1ad/0x38c [mac80211] [<ffffffffa025a394>] sta_info_destroy_addr+0x3e/0x5e [mac80211] [<ffffffffa02605d6>] ieee80211_set_disassoc+0x175/0x180 [mac80211] [<ffffffffa026084d>] ieee80211_mgd_deauth+0x58/0x17e [mac80211] [<ffffffff813a60c1>] ? __mutex_lock_common+0x37f/0x3a4 [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffffa026786e>] ieee80211_deauth+0x1e/0x20 [mac80211] [<ffffffffa01f47f9>] __cfg80211_mlme_deauth+0x130/0x13f [cfg80211] [<ffffffffa01e53f2>] ? cfg80211_netdev_notifier_call+0x28d/0x46d [cfg80211] [<ffffffff810732eb>] ? trace_hardirqs_off+0xd/0xf [<ffffffffa01f7eee>] __cfg80211_disconnect+0x111/0x189 [cfg80211] [<ffffffffa01e5433>] cfg80211_netdev_notifier_call+0x2ce/0x46d [cfg80211] [<ffffffff813aa9ea>] notifier_call_chain+0x37/0x63 [<ffffffff81068c98>] raw_notifier_call_chain+0x14/0x16 [<ffffffff81322e97>] call_netdevice_notifiers+0x1b/0x1d [<ffffffff8132386d>] dev_close+0x6a/0xa6 [<ffffffff8132395f>] rollback_registered_many+0xb6/0x2f4 [<ffffffff81323bb8>] unregister_netdevice_many+0x1b/0x66 [<ffffffffa026494f>] ieee80211_remove_interfaces+0xc5/0xd0 [mac80211] [<ffffffffa02580a2>] ieee80211_unregister_hw+0x47/0xe8 [mac80211] [<ffffffffa035290e>] ath9k_deinit_device+0x7a/0x9b [ath9k] [<ffffffffa035bc26>] ath_pci_remove+0x38/0x76 [ath9k] [<ffffffff8120940a>] pci_device_remove+0x2d/0x51 [<ffffffff8129d797>] __device_release_driver+0x7b/0xd1 [<ffffffff8129d885>] driver_detach+0x98/0xbe [<ffffffff8129ca7a>] bus_remove_driver+0x94/0xb7 [<ffffffff8129ddd6>] driver_unregister+0x6c/0x74 [<ffffffff812096d2>] pci_unregister_driver+0x46/0xad [<ffffffffa035bae1>] ath_pci_exit+0x15/0x17 [ath9k] [<ffffffffa035e1a2>] ath9k_exit+0xe/0x2f [ath9k] [<ffffffff8108050a>] sys_delete_module+0x1c7/0x236 [<ffffffff813a7df5>] ? retint_swapgs+0x13/0x1b [<ffffffff810749b5>] ? trace_hardirqs_on_caller+0x119/0x144 [<ffffffff8109b9f6>] ? audit_syscall_entry+0x11e/0x14a [<ffffffff81009bb2>] system_call_fastpath+0x16/0x1b wlan1: deauthenticating from 00:23:cd:e1:f9:b2 by local choice (reason=3) PM: Removing info for No Bus:wlan1 cfg80211: Calling CRDA to update world regulatory domain PM: Removing info for No Bus:rfkill2 PM: Removing info for No Bus:phy1 ath9k 0000:16:00.0: PCI INT A disabled Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * zd1211rw: fix potential array underflowDan Carpenter2010-03-02
| | | | | | | | | | | | | | | | | | | | The first chunk fixes a debugging assert to print a warning about array underflows. The second chunk corrects a potential array underflow. I also removed an assert in the second chunk because it can no longer happen. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Benoit Papillault <benoit.papillault@free.fr> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * airo: return from set_wep_key() when key length is zeroStanislaw Gruszka2010-03-02
| | | | | | | | | | | | | | | | Even if keylen == 0 is a bug and should not really happen, better avoid possibility of passing bad value to firmware. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | davinci_emac: off by oneDan Carpenter2010-03-03
| | | | | | | | | | | | | | | | | | This off by one error was found by smatch. drivers/net/davinci_emac.c +2390 emac_dev_open(13) error: buffer overflow 'priv->mac_addr' 6 <= 6 Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cassini: fix off by oneDan Carpenter2010-03-03
| | | | | | | | | | | | | | There are only 6 link_modes. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | be2net: download NCSI section during firmware updateSarveshwar Bandi2010-03-03
| | | | | | | | | | | | | | Adding code to update NCSI section while updating firmware on the controller. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cpmac: use after freeDan Carpenter2010-03-03
| | | | | | | | | | | | | | | | | | The original code dereferenced "cpmac_mii" after calling "mdiobus_free(cpmac_mii);" Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds2010-03-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (49 commits) OMAP: DSS2: Taal: Fix TE when resuming OMAP: DSS2: Taal: Fix ESD check OMAP: DSS2: OMAPFB: Constify some function parameters OMAP: DSS2: OMAPFB: install omapfb.h OMAP: DSS2: DSI: add error prints OMAP: DSS2: TPO-TD03MTEA1: fix function names OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helper OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATE OMAP: DSS2: DSI: remove external TE support OMAP: DSS2: move timing functions OMAP: DSS2: move set/get_wss() OMAP: DSS2: move enable/disable/suspend/resume OMAP: DSS2: move update() and sync() OMAP: DSS2: move set/get_update_mode() OMAP: DSS2: move enable/get_te() OMAP: DSS2: move get_recommended_bpp() OMAP: DSS2: move get_resolution() OMAP: DSS2: move enable/disable_channel to overlay manager OMAP: DSS2: move wait_vsync() OMAP: DSS2: move get/set_rotate() ...
| * | OMAP: DSS2: Taal: Fix TE when resumingTomi Valkeinen2010-03-02
| | | | | | | | | | | | | | | | | | | | | TE was not initialized properly on power on, which broke TE when resuming from suspend. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: Taal: Fix ESD checkTomi Valkeinen2010-03-01
| | | | | | | | | | | | | | | | | | Using taal_enable_te() when DSI bus was locked caused a deadlock. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: OMAPFB: Constify some function parametersVille Syrjälä2010-03-01
| | | | | | | | | | | | | | | Signed-off-by: Ville Syrjälä <ville.syrjala@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: DSI: add error printsTomi Valkeinen2010-02-26
| | | | | | | | | | | | | | | | | | Add error printing for dsi_vc_dcs_write() and dsi_vc_dcs_read(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: TPO-TD03MTEA1: fix function namesTomi Valkeinen2010-02-26
| | | | | | | | | | | | | | | | | | | | | Copy/paste had resulted in wrong function names in TPO TD043MTEA1 panel driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: DSI: add dsi_vc_dcs_read_2() helperTomi Valkeinen2010-02-25
| | | | | | | | | | | | | | | | | | | | | Add dsi_vc_dcs_read_2() helper function to read two bytes from the DSI peripheral. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: OMAPFB: Remove FB_OMAP2_FORCE_AUTO_UPDATETomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | Remove the option for forcing auto-update. Auto-update for manual update displays is no more a DSS feature, so if a particular display devices does have auto-update mode, it should be in display's custom settings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: DSI: remove external TE supportTomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | With the reworked model, DSI driver doesn't need to know anything about external TE lines. Thus we can remove ext_te support, and only leave the DSI TE trigger support. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move timing functionsTomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move check/set/get_timings() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move set/get_wss()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move set/get_wss() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move enable/disable/suspend/resumeTomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move enable/disable/suspend/resume from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move update() and sync()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move update() and sync() from omap_dss_device to omap_dss_driver. Also, update was hardcoded to use virtual channel 0. This patch adds a parameter that specifies the VC. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move set/get_update_mode()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move set/get_update_mode() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move enable/get_te()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move enable/get_te() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move get_recommended_bpp()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move get_recommended_bpp() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move get_resolution()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move get_resolution() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move enable/disable_channel to overlay managerTomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move enable/disable_channel() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move wait_vsync()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move wait_vsync() from omap_dss_device to overlay manager. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move get/set_rotate()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move get/set_rotate() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
| * | OMAP: DSS2: move set/get_mirror()Tomi Valkeinen2010-02-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | Move set/get_mirror() from omap_dss_device to omap_dss_driver. This is part of a larger patch-set, which moves the control from omapdss driver to the display driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@nokia.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 08:34:48 -0500