aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* USB: r8a66597-hcd: fix endian problemYoshihiro Shimoda2007-10-12
| | | | | | | | Fixed the problem that does not work in the big endian machine. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: r8a66597-hcd: fix Class or Vendor RequestYoshihiro Shimoda2007-10-12
| | | | | | | | | Fixed the problem that does not work in the case of bRequest = 0x05 in Class or Vendor Request. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb/serial/ch341.c: make 4 functions staticAdrian Bunk2007-10-12
| | | | | | | | This patch makes four needlessly global functions static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Driver for CH341 USB-serial adaptorFrank A Kingswood2007-10-12
| | | | | | | | | | | This patch implements a USB serial port driver for the Winchiphead CH341 USB-RS232 Converter. This chip also implements an IEEE 1284 parallel port, I2C and SPI, but that is not supported by the driver. Signed-off-by: Frank A Kingswood <frank@kingswood-consulting.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cxacru: Use appropriate logging for errorsSimon Arlott2007-10-12
| | | | | | | | | | | | | | | | When an error occurs, existing logging uses dbg() so the cause of a problem is hard to determine. Error conditions shouldn't only be properly reported with debugging enabled. A side effect of this change is that when an uninitialised device is started, a log message similar to the following is sent: cxacru 5-2:1.0: receive of cm 0x90 failed (-104) This is normal - the device did not respond so firmware will be loaded. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Duncan Sands <baldrick@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cp2101.c: add additional device IDEdouard Lafargue2007-10-12
| | | | | | | | | | | | | This patch adds an additional device ID to the cp2101 USB serial driver. This device is a Gemalto Prox-PU or CU contactless card reader (ISO14443-A/B and Mifare). The reader is a standard Gemalto serial proximity reader using the Gemalto Block Protocol (see reader's documentation) bundled with a built-in CP2102 for serial/USB conversion. Signed-off-by: Edouard Lafargue (edouard@lafargue.name) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs modification for Nikon D200Phil Dibowitz2007-10-12
| | | | | | | | | | Upgrade the unusual_devs.h file to support the Nikon D200 Signed-off-by: Mike Pagano <mpagano-kernel@mpagano.com> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove USB_QUIRK_NO_AUTOSUSPENDAlan Stern2007-10-12
| | | | | | | | | | | | | | | | | | | | This patch (as995) cleans up the remains of the former NO_AUTOSUSPEND quirk. Since autosuspend is disabled by default, we will let userspace worry about which devices can safely be suspended. Thus the lengthy series of quirk entries is no longer needed, and neither is the quirk ID. I suppose someone might eventually run across a hub that can't be suspended; let's ignore the possibility for now. The patch also cleans up the hasty way in which autosuspend gets disabled. Setting udev->autosuspend_delay to -1 wasn't quite right, because the value is always supposed to be a multiple of HZ. It's better to leave the delay value alone and set autosuspend_disabled, which is what the quirk routine used to do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: don't propagate FREEZE or PRETHAW suspendsAlan Stern2007-10-12
| | | | | | | | | | | | | This patch (as992) fixes a recently-added bug. During a FREEZE or PRETHAW suspend notification, non-root devices don't actually get suspended. So we shouldn't tell their parent hubs that they did. (This code path used to be skipped over, until the FREEZE/PRETHAW test got moved out of usb_suspend_both() into generic_suspend().) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs update for Nokia 6131Alan Stern2007-10-12
| | | | | | | | | | This patch (as991) updates the unusual_devs entry for the Nokia 6131 phone. As reported by Juan Ignacio Cherrutti, there's new firmware available but it still has the same old transfer-size limit. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix limited_power setting mistake in hub.cjidong xiao2007-10-12
| | | | | | | | | | | | | | | | | | | This patch (jx001) fixes a variable assignment mistake in hub driver. limited_power should be set to 0 if the hub is self-powered,and 1 if the hub is bus-powered. However, the effect of the code was exactly opposite to the spec's statement for the Local Power Source field. The spec says, this field is 1 meaning Local power supply lost while this field is 0 indicating Local power supply good.(This statement is very confusing.) So this patch switchs the 0 and 1. Signed-off-by: Jason Xiao <jidong.xiao@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix double frees in error code paths of ipaq driverOliver Neukum2007-10-12
| | | | | | | | | the error code paths can be enter with buffers to freed buffers. Serial core would do a kfree() on memory already freed. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: always visit drivers/usb/misc/Adrian Bunk2007-10-12
| | | | | | | | | | | | | Currently, every driver under drivers/usb/misc/ also has to be listed in drivers/usb/Makefile. This has been forgotten more than once, and this patch changes drivers/usb/Makefile to simply always visit drivers/usb/misc/ when building the USB code. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Toralf Förster <toralf.foerster@gmx.de> Acked-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-skeleton leaking locks on openMark Gross2007-10-12
| | | | | | | | | | | | | | | | | | | | | | This weekend I was hacking around with a trivial USB driver for talking to the boot load firmware of a USB Bit Whacker. It's running the MicroChip Pic18 boot loader firmware and I'm putting together a flash program for writing new FW to the thing. Anyway in my use of the usb-skeleton.c as my starting point I discovered my test program was getting hung up after attempting to write a buffer. The application and driver where hung in a way that required me to reboot to get it to clean up so I could try again. It turned out the code path through skel_open can grap the driver's io_mutex lock and forget to release it. The following patch fixes the problem for me. Signed-off-by: Mark Gross <mgross@linux.intel.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: flush outstanding URBs when suspendingAlan Stern2007-10-12
| | | | | | | | | | | | | | | | | | | | This patch (as989) makes usbcore flush all outstanding URBs for each device as the device is suspended. This will be true even when CONFIG_USB_SUSPEND is not enabled. In addition, an extra can_submit flag is added to the usb_device structure. That flag will be turned off whenever a suspend request has been received for the device, even if the device isn't actually suspended because CONFIG_USB_SUSPEND isn't set. It's no longer necessary to check for the device state being equal to USB_STATE_SUSPENDED during URB submission; that check can be replaced by a check of the can_submit flag. This also permits us to remove some questionable references to the deprecated power.power_state field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: break apart flush_endpoint and disable_endpointAlan Stern2007-10-12
| | | | | | | | | | | | | | | | | | | | | | | This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: move decision to ignore FREEZE eventsAlan Stern2007-10-12
| | | | | | | | | | | | | | | This patch (as987) changes the way FREEZE and PRETHAW suspend events are handled in usbcore. The decision about whether or not to ignore them for non-root devices is pushed down into the USB-device driver, instead of being made in the core code. This is appropriate, since devices exported to a virtualized guest or over a network may indeed need to handle these types of suspend, even though normal devices don't. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Get rid of annoying endpoint-release messageAlan Stern2007-10-12
| | | | | | | | | This patch (as990) removes an annoying debugging message. Nobody really cares when endpoint pseudo-devices are released. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: AMD5536: use pdev->revisionAuke Kok2007-10-12
| | | | | | | Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Cc: Thomas Dahlmann <thomas.dahlmann@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: sisusbvga: Fix bugSatyam Sharma2007-10-12
| | | | | | | | | | | | | | drivers/usb/misc/sisusbvga/sisusb.c: In function sisusb_open drivers/usb/misc/sisusbvga/sisusb.c:2444: warning: sisusb is used uninitialized in this function is a genuine bug (which will cause oops). We cannot use "sisusb" in error path for (!interface), because sisusb will itself be derived from "interface" later. Signed-off-by: Satyam Sharma <satyam@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix errornous assumption in the usb serial framework revealed by ↵Oliver Neukum2007-10-12
| | | | | | | | | | | | | | iuu_phoenix the iuu_phoenix driver submits another URB from a completion handler. This dictates a certain order of calls to usb_kill_urb() in kill_traffic(). As other drivers may do it the other way round, we need to use both orders in kill_traffic(). This patch does so and should be merged before iuu_phoenix is merged. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ELAN U132 Host Controller Driver: convert sw_lock to mutexMatthias Kaehlcke2007-10-12
| | | | | | | | | The ELAN U132 Host Controller Driver uses the semaphore sw_lock as mutex. Use the mutex API instead of the (binary) semaphore. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: Initialize Huawei E220 properlyJohann Wilhelm2007-10-12
| | | | | | | | | | | This is a reworked version of this patch: http://www.mail-archive.com/linux-usb-devel%40lists.sourceforge.net/msg55094/activate_huawei_dev.patch That properly initializes the HUAWEI E220 devices into multi-port mode. Signed-off-by: Johann Wilhelm <johann.wilhelm@student.tugraz.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix location of statement label in dummy-hcdAlan Stern2007-10-12
| | | | | | | | | | This patch (as984) fixes a rather elementary mistake in dummy_hcd. The new statement label should come before the spin_unlock_irqrestore, not after it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove traces of urb->status from usbcoreAlan Stern2007-10-12
| | | | | | | | | This patch (as981) removes the remaining nontrivial usages of urb->status from usbcore. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: get rid of urb->lockAlan Stern2007-10-12
| | | | | | | | | | | Now that urb->status isn't used, urb->lock doesn't protect anything. This patch (as980) removes it and replaces it with a private mutex in the one remaining place it was still used: usb_kill_urb. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Eliminate urb->status usage!Alan Stern2007-10-12
| | | | | | | | | | | | | | | This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in usbmonAlan Stern2007-10-12
| | | | | | | | | | This patch (as978) reorganizes the way usbmon uses urb->status. It now accepts the status value as an argument. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in r8a66597-hcdAlan Stern2007-10-12
| | | | | | | | | | | | This patch (as977) reorganizes the way r8a66597-hcd sets urb->status. It now keeps the information in a local variable until the last moment. Parts of this patch were written by Yoshihiro Shimoda. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in sl811-hcdAlan Stern2007-10-12
| | | | | | | | | | | | | | This patch (as976) reorganizes the way sl811-hcd sets urb->status. It now keeps the information in a local variable until the last moment. The patch also improves the handling of faults during the status stage of a control transfer, since it no longer needs to retain the error information from the earlier stages. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in ohci-hcdAlan Stern2007-10-12
| | | | | | | | | | This patch (as975) reorganizes the way ohci-hcd sets urb->status. It now keeps the information in a local variable until the last moment. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in ehci-hcdAlan Stern2007-10-12
| | | | | | | | | | | | | This patch (as974) reorganizes the way ehci-hcd sets urb->status. It now keeps the information in a local variable until the last moment. The patch also simplifies the handling of -EREMOTEIO, since the only use of that code is to set the do_status flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: reorganize urb->status use in dummy-hcdAlan Stern2007-10-12
| | | | | | | | | This patch (as973) reorganizes the way dummy-hcd sets urb->status. It now keeps the information in a local variable until the last moment. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: serial/pl2303: support for BenQ Siemens Mobile Phone EF81Andreas Loibl2007-10-12
| | | | | | | | | This patch adds support for the BenQ Mobile Phone EF81 to pl2303 Signed-off-by: Andreas Loibl <andreas@andreas-loibl.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: avoid redundant cast of kmalloc() return value in OTi-6858 driverJesper Juhl2007-10-12
| | | | | | | | | | In drivers/usb/serial/oti6858.c::pl2303_buf_alloc() the return value of kmalloc() is being cast to "struct pl2303_buf *", but that need not be done here since kmalloc() returns "void *". Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-serial: show port number in sysfsRoman Kagan2007-10-12
| | | | | | | | | | | | | | | | | | | | Some usb-serial devices (e.g. certain Edgeport models) have more than one serial port on the same USB device/interface. Currently the only way to distinguish these ports in userspace is by their minor device number: the driver makes them consecutive and in stable order. However, for the purpose of stable naming with udev this is insufficient: when udev handles the ADD event for one of the ports it doesn't know what minor number the other one has. To make stable naming easier, export the port number via sysfs. Signed-off-by: Roman Kagan <rkagan@sw.ru> Signed-off-by: Dmitry Guryanov <dimak@dgap.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix memory leak in berry_charge driverGreg Kroah-Hartman2007-10-12
| | | | | | | | This fixes a small memory leak that happens every time the device is plugged in. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: less-restrictive command checking in g-file-storageAlan Stern2007-10-12
| | | | | | | | | | | | This patch (as983) makes a test for minimum-length command sizes in g_file_storage less restrictive. It doesn't matter because commands with bad lengths will be detected later on anyway, and doing it like this makes the driver interoperable with certain buggy hosts such as the JVC HiFi (reported by Samuel Hangouet). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: kobil_sct: Rework driverAlan Cox2007-10-12
| | | | | | | | | | No hardware but this driver is currently totally broken so we can't make it much worse. Remove all tbe broken invalid termios handling and replace it with a proper set_termios method. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cp2101: Coding style policeAlan Cox2007-10-12
| | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: avoid the donelist after an error in ohci-hcdAlan Stern2007-10-12
| | | | | | | | | | | | | This patch (as972) changes ohci-hcd so that after an error occurs, the remaining TDs for the URB will be skipped over entirely instead of going through the donelist. This enables the driver to give back the URB as soon as the error is detected, avoiding the need to store the error status in urb->status. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix mistake in usb_hcd_giveback_urbAlan Stern2007-10-12
| | | | | | | | | | This patch (as971) fixes a small mistake: The URB's completion status needs to be adjusted before the URB is passed to usmon_urb_complete(), not afterward. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: Handle FT232RL devices like FT232BM devicesAndrew M. Bishop2007-10-12
| | | | | | | | | | | Handle the FT232RL device type in exactly the same way as FT232BM devices (FT232RL detection was added around kernel 2.6.20 but not code for handling it). Signed-off-by: Andrew M. Bishop <amb@gedanken.demon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add urb->unlinked fieldAlan Stern2007-10-12
| | | | | | | | | | | | | | | | This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: centralize -EREMOTEIO handlingAlan Stern2007-10-12
| | | | | | | | | | | | | | | | | | | This patch (as969) continues the ongoing changes to the way HCDs report URB statuses. The programming interface has been simplified by making usbcore responsible for clearing urb->hcpriv and for setting -EREMOTEIO status when an URB with the URB_SHORT_NOT_OK flag ends up as a short transfer. By moving the work out of the HCDs, this removes a fair amount of repeated code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: remove Iso status value in uhci-hcdAlan Stern2007-10-12
| | | | | | | | | | | | | This patch (968) changes the way uhci-hcd reports status for Isochronous URBs. Until now urb->status has been set to the last detected error code. But other HCDs don't do this; they leave the status set to 0 and report errors only in the individual iso packet descriptors. So this patch removes the extra computation and makes uhci-hcd behave like the others. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: minor fixes for r8a66597 driverAlan Stern2007-10-12
| | | | | | | | | | | | | | | | | This patch (as967) makes a few relatively minor changes to the r8a66597 driver: finish_request() does nothing but call done(), so merge the two routines. Detect and report -EOVERFLOW errors. Fix the calculation that checks for short packets. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI restart speedupMarcelo Tosatti2007-10-12
| | | | | | | | | | | | | | | | | | | | It is not necessary to powerdown the ports on ehci_pci_reinit() when the chip reset already did that. Removing this saves 20ms during restart after poweroff paths (which OLPC uses a lot). To ensure driver startup then behaves consistently, force a reset during driver startup. (Not doing this was an accident of some previous changes to the init sequence.) Make the corresponding change in the PS3 support. It's not clear what ehci-fsl should do here; it has similar code to the PS3. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <rvinson@mvista.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: CosmeticStanislaw Gruszka2007-10-12
| | | | | | | | | Update copyrights and remove not necessary warning (ueagle-atm works well on suspend/resume). Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UEAGLE: Do not sleep when device is disconnectedStanislaw Gruszka2007-10-12
| | | | | | | | | Do not sleep in kernel thread when device is disconnected, this make faster suspending and module unloading. Use one wait queue for sleeping. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-29 23:44:57 -0500