aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* atmel_serial: fix uart/console concurrent accessMarc Pignat2008-04-02
| | | | | | | | | | | | | | | Strange chars appear on the serial port when a printk and a printf happens at the same time. This is caused by the pdc sending chars while atmel_console_write (called from printk) is executing Concurent access of uart and console to the same port leads to corrupted data to be transmitted, so disable tx dma (PDC) while writing to the console. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* atmel_serial: avoid stopping pdc during transmissionMichael Trimarchi2008-04-02
| | | | | | | | | | | | | | | I found a problem related to losing data during pdc transmission in atmel_serial: connect ttyS1 with ttyS2 using a loopback cable, send 30 byte of packet from one to the other and waiting for 30 byte. On the other side just read and echo the data received. We always call atmel_tx_dma() from the tasklet regardless of what interrupt triggered it. Signed-off-by: michael <trimarchi@gandalf.sssup.it> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-04-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ide: use ->ata_input_data in ide_driveid_update() ide-h8300: 32-bit I/O is unsupported ide/legacy/q40ide.c: add MODULE_LICENSE ide/legacy/macide: add MODULE_LICENSE ide/legacy/falconide.c: add MODULE_LICENSE ide/legacy/buddha.c: add MODULE_LICENSE ide/legacy/gayle.c: add MODULE_LICENSE ide/h8300/ide-h8300.c: add MODULE_LICENSE ide/cris/ide-cris.c: add MODULE_LICENSE ide/arm/ide_arm.c: add MODULE_LICENSE ide/ppc/pmac.c: add MODULE_LICENSE ide/ppc/mpc8xx.c: add MODULE_LICENSE ide/pci/cmd640.c: add MODULE_LICENSE ide-pnp.c: add MODULE_LICENSE
| * ide: use ->ata_input_data in ide_driveid_update()Bartlomiej Zolnierkiewicz2008-04-02
| | | | | | | | | | | | | | | | | | Use ->ata_input_data method instead of calling ata_input_data() directly. Currently it matters only for (broken) ide-cris host driver but it may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide-h8300: 32-bit I/O is unsupportedBartlomiej Zolnierkiewicz2008-04-02
| | | | | | | | | | | | | | This host driver doesn't support 32-bit I/O (it sets hwif->INSL/OUTSL to NULL) so IDE_HFLAG_NO_IO_32BIT host flag needs to be set. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/legacy/q40ide.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/legacy/macide: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/legacy/falconide.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/legacy/buddha.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/legacy/gayle.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/h8300/ide-h8300.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/cris/ide-cris.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/arm/ide_arm.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/ppc/pmac.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/ppc/mpc8xx.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide/pci/cmd640.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it can be built modular it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide-pnp.c: add MODULE_LICENSEAdrian Bunk2008-04-02
| | | | | | | | | | | | | | | | Now that it's in an own module it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | sky2: fix suspend/resume racesStephen Hemminger2008-04-02
| | | | | | | | | | | | | | | | | | | | There are a couple of possible races on suspend/resume. First the driver needs to block new packets from being queued for Tx. The other less likely problem is the watchdog timer going off during resume. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvbLinus Torvalds2008-04-02
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (7486): radio-cadet: wrap PNP probe code in #ifdef CONFIG_PNP V4L/DVB (7485): v4l2-int-device.c: add MODULE_LICENSE V4L/DVB (7466): Avoid minor model number warning when an OEM HVR1250 board is detected V4L/DVB (7465): Fix eeprom parsing and errors on the HVR1800 products V4L/DVB (7464): Convert driver to use a single SRAM memory map V4L/DVB (7461): bttv: fix missed index check V4L/DVB (7400): bttv: Add a radio compat_ioctl file operation V4L/DVB (7278): bttv: Re-enable radio tuner support for VIDIOCGFREQ/VIDIOCSFREQ ioctls V4L/DVB (7277): bttv: Re-enabling radio support requires the use of struct bttv_fh
| * | V4L/DVB (7486): radio-cadet: wrap PNP probe code in #ifdef CONFIG_PNPBjorn Helgaas2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wrap PNP probe code in #ifdef CONFIG_PNP. Without this change, we'll have unresolved references to pnp_get_resource() function when CONFIG_PNP=n. (This is a new interface that's not in mainline yet.) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7485): v4l2-int-device.c: add MODULE_LICENSEAdrian Bunk2008-04-01
| | | | | | | | | | | | | | | | | | | | | Now that it's in an own module it needs a MODULE_LICENSE. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7466): Avoid minor model number warning when an OEM HVR1250 board ↵Steven Toth2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | is detected Avoid minor model number warning when an OEM HVR1250 board is detected. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7465): Fix eeprom parsing and errors on the HVR1800 productsSteven Toth2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | On some models, the valid Hauppauge eeprom data begins at a different offset. This patch avoid unfriendly 'corrupt' eeprom errors during driver load. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7464): Convert driver to use a single SRAM memory mapSteven Toth2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reduces the memory footprint and removes the need to manually configure each map, which lead to a bug where the Fusion EXP 5 board broke for a while. This also fixes digital support again for the DViCO FusionHDTV5Express. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7461): bttv: fix missed index checkCyrill Gorcunov2008-04-01
| | | | | | | | | | | | | | | | | | | | | We should check for proper index first Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7400): bttv: Add a radio compat_ioctl file operationRobert Fitzsimons2008-04-01
| | | | | | | | | | | | | | | Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7278): bttv: Re-enable radio tuner support for ↵Robert Fitzsimons2008-04-01
| | | | | | | | | | | | | | | | | | | | | VIDIOCGFREQ/VIDIOCSFREQ ioctls Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
| * | V4L/DVB (7277): bttv: Re-enabling radio support requires the use of struct ↵Robert Fitzsimons2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bttv_fh A number of the radio tuner ioctl functions are shared with the TV tuner, these functions require a struct bttv_fh data structure to be allocated and initialized. Signed-off-by: Robert Fitzsimons <robfitz@273k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2008-04-02
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] mvsas: check subsystem id [SCSI] mvsas: get phy info. [SCSI] mvsas: fix the buffer of rx DMA overflow bug [SCSI] mvsas: retry aborting task. [SCSI] mvsas: check hd whether unplugged [SCSI] mvsas : interrupt handling [SCSI] mvsas: a tag handler implementation [SCSI] mvsas: fill in error info record and phy mode6 bits. [SCSI] libsas: Warn if ATA device detected but CONFIG_SCSI_SAS_ATA not set [SCSI] hosts.c: fixes for "no error" reported after error scenarios Revert "[SCSI] fix bsg queue oops with iscsi logout"
| * | | [SCSI] mvsas: check subsystem idKe Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for mv6480 chip which subsystem id is 6480 in spite of device id is 6440. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: get phy info.Ke Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | removed unused code and attached SATA address makes use of port id. enable HBA interrupt after calling sas_register_ha(); Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: fix the buffer of rx DMA overflow bugKe Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fix the buffer of rx DMA overflow bug. fix default queue depth. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: retry aborting task.Ke Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: check hd whether unpluggedKe Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | if unplugged, driver's queuecommand function will return SAS_PHY_DOWN. task->lldd_task is used for saving its slot info. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas : interrupt handlingKe Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a slot is busy, we will not free this slot until slot reset is completed. When unplugged the disk, we should release all command tasks with unplugged port that have been sent. If MVS_USE_TASKLET is defined, we can enable tasklet. Default is off. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: a tag handler implementationKe Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add a new tag handler to create slot num. When a slot num is busy, new task can't hit this bit which was already used. plumb in phy speeds. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] mvsas: fill in error info record and phy mode6 bits.Ke Wei2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | and remove some unused members from struct. Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] libsas: Warn if ATA device detected but CONFIG_SCSI_SAS_ATA not setJames Bottomley2008-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We give a very cryptic error if an ATA device is seen on a SAS port but libsas isn't compiled to include libata to handle them. Add an extra warning to explain specifically what the problem is. Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | [SCSI] hosts.c: fixes for "no error" reported after error scenariosJames Smart2008-03-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects some cases in scsi_add_host() that fail, but the "error" return code was not reset after a prior use which set it to a non-error value. Patch cut against scsi-rc-fixes-2.6 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
| * | | Revert "[SCSI] fix bsg queue oops with iscsi logout"James Bottomley2008-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 4b6f5b3a993cbe34b4280f252bccc76967c185c8. bsg takes a reference to the underlying generic device, so it's impossible to unregister bsg in the device release routine. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-04-02
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (45 commits) [VLAN]: Proc entry is not renamed when vlan device name changes. [IPV6]: Fix ICMP relookup error path dst leak [ATM] drivers/atm/iphase.c: compilation warning fix IPv6: do not create temporary adresses with too short preferred lifetime IPv6: only update the lifetime of the relevant temporary address bluetooth : __rfcomm_dlc_close lock fix bluetooth : use lockdep sub-classes for diffrent bluetooth protocol [ROSE/AX25] af_rose: rose_release() fix mac80211: correct use_short_preamble handling b43: Fix PCMCIA IRQ routing b43: Add DMA mapping failure messages mac80211: trigger ieee80211_sta_work after opening interface [LLC]: skb allocation size for responses [IP] UDP: Use SEQ_START_TOKEN. [NET]: Remove Documentation/networking/sk98lin.txt [ATM] atm/idt77252.c: Make 2 functions static [ATM]: Make atm/he.c:read_prom_byte() static [IPV6] MCAST: Ensure to check multicast listener(s). [LLC]: Kill llc_station_mac_sa symbol export. forcedeth: fix locking bug with netconsole ...
| * | | [ATM] drivers/atm/iphase.c: compilation warning fixLeonardo Potenza2008-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed the warning messages: drivers/atm/iphase.c:961: warning: 'tcnter' defined but not used drivers/atm/iphase.c:963: warning: 'xdump' defined but not used tcnter and xdump() are used only in debug build Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | b43: Fix PCMCIA IRQ routingMichael Buesch2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the IRQ routing on PCMCIA devices. With this patch the card will finally be able to receive IRQs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | b43: Add DMA mapping failure messagesMichael Buesch2008-04-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds messages for some DMA mapping failures. These are useful for debugging DMA address problems, as they appear on x86_64 machines with IOMMU enabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | [ATM] atm/idt77252.c: Make 2 functions staticAdrian Bunk2008-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the following needlessly global functions static: - idt77252_send() - idt77252_dev_close() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [ATM]: Make atm/he.c:read_prom_byte() staticAdrian Bunk2008-03-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the needlessly global read_prom_byte() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | Merge branch 'upstream-davem' of ↵David S. Miller2008-03-28
| |\ \ \ | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| | * | | forcedeth: fix locking bug with netconsoleIngo Molnar2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While using netconsole on forcedeth, lockdep noticed the following locking bug: ================================= [ INFO: inconsistent lock state ] 2.6.24-rc6 #6 Signed-off-by: Ingo Molnar <mingo@elte.hu> --------------------------------- inconsistent {softirq-on-W} -> {in-softirq-W} usage. udevd/719 [HC0[0]:SC1[1]:HE1:SE0] takes: (_xmit_ETHER){-+..}, at: [<c043062e>] dev_watchdog+0x1c/0xb9 {softirq-on-W} state was registered at: [<c0147f67>] mark_held_locks+0x4e/0x66 [<c014810e>] trace_hardirqs_on+0xfe/0x136 [<c048ae63>] _spin_unlock_irq+0x22/0x42 [<c02ec617>] nv_start_xmit_optimized+0x347/0x37a [<c042c80d>] netpoll_send_skb+0xa4/0x147 [<c042d4a6>] netpoll_send_udp+0x238/0x242 [<c02f44f6>] write_msg+0x6d/0x9b [<c012c129>] __call_console_drivers+0x4e/0x5a [<c012c18c>] _call_console_drivers+0x57/0x5b [<c012c2dd>] release_console_sem+0x11c/0x1b9 [<c012caeb>] register_console+0x1eb/0x1f3 [<c06ae673>] init_netconsole+0x119/0x15f [<c069149b>] kernel_init+0x147/0x294 [<c01058cb>] kernel_thread_helper+0x7/0x10 [<ffffffff>] 0xffffffff irq event stamp: 950 hardirqs last enabled at (950): [<c048ae63>] _spin_unlock_irq+0x22/0x42 hardirqs last disabled at (949): [<c048aaf7>] _spin_lock_irq+0xc/0x38 softirqs last enabled at (0): [<c012a29c>] copy_process+0x375/0x126d softirqs last disabled at (947): [<c0106d43>] do_softirq+0x61/0xc6 other info that might help us debug this: no locks held by udevd/719. stack backtrace: Pid: 719, comm: udevd Not tainted 2.6.24-rc6 #6 [<c0105c46>] show_trace_log_lvl+0x12/0x25 [<c01063ec>] show_trace+0xd/0x10 [<c010670c>] dump_stack+0x57/0x5f [<c0147505>] print_usage_bug+0x10a/0x117 [<c0147c38>] mark_lock+0x121/0x402 [<c01488b6>] __lock_acquire+0x3d1/0xb64 [<c0149405>] lock_acquire+0x4e/0x6a [<c048a99b>] _spin_lock+0x23/0x32 [<c043062e>] dev_watchdog+0x1c/0xb9 [<c0133e4a>] run_timer_softirq+0x133/0x193 [<c0130907>] __do_softirq+0x78/0xed [<c0106d43>] do_softirq+0x61/0xc6 ======================= eth1: link down The fix is to disable/restore irqs instead of disable/enable. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | | usb net: asix does not really need 10/100mbitMike Frysinger2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asix usb driver currently depends on NET_ETHERNET which means you cannot enable this driver if you only have 1000mbit enabled in your kernel. Since there is no real dependency between the NET_ETHERNET portion and the asix driver, simply drop it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Greg KH <greg@kroah.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| | * | | Blackfin EMAC Driver: delete unused variables to fixup gcc warningsMike Frysinger2008-03-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-04 09:35:57 -0500