aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* USB: musb: sanitize clearing TXCSR DMA bits (take 2)Sergei Shtylyov2009-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MUSB code clears TXCSR_DMAMODE incorrectly in several places, either asserting that TXCSR_DMAENAB is clear (when sometimes it isn't) or clearing both bits together. Recent versions of the programmer's guide require DMAENAB to be cleared first, although some older ones didn't. Fix this and while at it: - In musb_gadget::txstate(), stop clearing the AUTOSET and DMAMODE bits for the CPPI case since they never get set anyway (the former bit is reserved on DaVinci); but do clear the DMAENAB bit on the DMA error path. - In musb_host::musb_ep_program(), remove the duplicate DMA controller specific code code clearing the TXCSR previous state, add the code to clear TXCSR DMA bits on the Inventra DMA error path, to replace such code (executed late) on the PIO path. - In musbhsdma::dma_channel_abort()/dma_controller_irq(), add/use the 'offset' variable to avoid MUSB_EP_OFFSET() invocations on every RXCSR/TXCSR access. [dbrownell@users.sourceforge.net: don't introduce CamelCase, shrink diff] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb: bugfixes for multi-packet TXDMA supportSergei Shtylyov2009-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We really want to use DMA mode 1 for all multi-packet transfers; that's one IRQ on DMA completion, instead of one per packet. There is an important issue with such transfers, especially on the host side: when such transfers end with a full-size packet, we must defer musb_dma_completion() calls until the FIFO empties. Else we report URB completions too soon, and may clobber data in the FIFO fifo when writing the next packet (losing data). The Inventra DMA support uses DMA mode 1, but it ignores that issue. The CPPI DMA support uses mode 0, but doesn't handle its TXPKTRDY interrupts quite right either; it can get stale "packet ready" interrupts, and report transfer completion too early using slightly different code paths, also losing data. So I'm solving it in a generic way -- by adding a sort of the "interrupt filter" into musb_host_tx(), catching these cases where a DMA completion IRQ doesn't suffice and removing some needlessly controller-specific logic. When a TXDMA interrupt happens and DMA request mode 1 is active, that filter resets to mode 0 and defers URB completion processing until TXPKTRDY, unless the FIFO is already empty. Related filtering logic in Inventra and CPPI code gets removed. Since it should be competely safe now to use the DMA request mode 1 for host side transfers with the CPPI DMA controller, set it in musb_h_tx_dma_start() ... now renamed (and shared). [ dbrownell@users.sourceforge.net: don't introduce more CamElCase; use more concise explanations ] Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb_host, fix ep0 fifo flushingDavid Brownell2009-04-17
| | | | | | | | | | | | | | | | The MUSB host side can't share generic TX FIFO flush logic with EP0; the EP0 TX status register bits are different from those for other entpoints. Resolve this issue by providing a new EP0-specific routine to flush and reset the FIFO, which pays careful attention to restrictions listed in the latest programmer's guide. This gets rid of an open issue whereby the usbtest control write test (#14) failed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: augment unusual_devs entry for Simple Tech/DatafabAlan Stern2009-04-17
| | | | | | | | | | | | This patch (as1227) adds the MAX_SECTORS_64 flag to the unusual_devs entry for the Simple Tech/Datafab controller. This fixes Bugzilla #12882. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: binbin <binbinsh@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: musb_host, minor enqueue locking fix (v2)David Brownell2009-04-17
| | | | | | | | | | Someone noted that the enqueue path used an unlocked access for usb_host_endpoint->hcpriv ... fix that, by being safe and always accessing it under spinlock protection. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix oops in cdc-wdm in case of malformed descriptorsOliver Neukum2009-04-17
| | | | | | | | | | cdc-wdm needs to ignore extremely malformed descriptors. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: qcserial: Add extra device IDsMatthew Garrett2009-04-17
| | | | | | | | | | | Add a set of device IDs from the Windows drivers. These aren't complete (there's a couple of cases where a QDL device is identified without the associated modem being identified), but it's better than the current situation. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: Add ids for D-Link DWM-652 3.5G modemPascal Terjan2009-04-17
| | | | | | | | | | | | | | | | | | | This patch allows D-Link DWM-652 3.5G modem to work. It is an express card but was only tested with the provided usb adapter as I don't have machines with express card connector. /dev/ttyUSB{0,1,2} get created, and using comgt on ttyUSB1 works fine : [root@plop tmp]# comgt -d /dev/ttyUSB1 -e Enter PIN number: XXXX Waiting for Registration..(120 sec max). Registered on Home network: "Orange France",2 Signal Quality: 15,99 From: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: add vendor/project id for JETI specbos 1201 spectrometerPeter Korsgaard2009-04-17
| | | | | | | Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb gadget: fix ethernet link reports to ethtoolJonathan McDowell2009-04-17
| | | | | | | | | | | | | | | The g_ether USB gadget driver currently decides whether or not there's a link to report back for eth_get_link based on if the USB link speed is set. The USB gadget speed is however often set even before the device is enumerated. It seems more sensible to only report a "link" if we're actually connected to a host that wants to talk to us. The patch below does this for me - tested with the PXA27x UDC driver. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ata: Report 16/32bit PIO as best we canAlan Cox2009-04-16
| | | | | | | | | | | | | | The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: use ATA_ID_CFA_*Sergei Shtylyov2009-04-16
| | | | | | | Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_legacy: fix no device fail pathTejun Heo2009-04-16
| | | | | | | | | | | When pata_legacy can't detect any device, it unregisters the platform_device and fails detection. However, it forgets to detach ata host triggering weird failures as the host later gets freed by devres while still attached. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_hpt37x: fix HPT370 DMA timeoutsSergei Shtylyov2009-04-16
| | | | | | | | | The libata driver has copied the code from the IDE driver which caused a post 2.4.18 regression on many HPT370[A] chips -- DMA stopped to work completely, only causing timeouts. Now remove hpt370_bmdma_start() for good... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: handle SEMB signature betterTejun Heo2009-04-16
| | | | | | | | | | | | | | | WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-04-16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (64 commits) phylib: Fix delay argument of schedule_delayed_work NET/ixgbe: Fix powering off during shutdown NET/e1000e: Fix powering off during shutdown NET/e1000: Fix powering off during shutdown packet: avoid warnings when high-order page allocation fails gianfar: stop send queue before resetting gianfar myr10ge: again fix lro_gen_skb() alignment declance: convert to net_device_ops bfin_mac: convert to net_device_ops au1000: convert to net_device_ops atarilance: convert to net_device_ops a2065: convert to net_device_ops ixgbe: update real_num_tx_queues on changing num_rx_queues ixgbe: fix tx queue index Revert "rose: zero length frame filtering in af_rose.c" sfc: Use correct macro to set event bitfield sfc: Match calls to netif_napi_add() and netif_napi_del() bonding: Remove debug printk e1000/e1000: fix compile warning ehea: Fix incomplete conversion to net_device_ops ...
| * phylib: Fix delay argument of schedule_delayed_workAtsushi Nemoto2009-04-16
| | | | | | | | | | | | | | | | | | The commit a390d1f3 ("phylib: convert state_queue work to delayed_work") missed converting 'expires' value to 'delay' value. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * NET/ixgbe: Fix powering off during shutdownRafael J. Wysocki2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | Prevent ixgbe from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate ixgbe_shutdown() from ixgbe_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * NET/e1000e: Fix powering off during shutdownRafael J. Wysocki2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | Prevent e1000e from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate e1000e_shutdown() from e1000e_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * NET/e1000: Fix powering off during shutdownRafael J. Wysocki2009-04-16
| | | | | | | | | | | | | | | | | | | | | | | | Prevent e1000 from putting the adapter into D3 during shutdown except when we're going to power off the system, since doing that may generally cause problems with kexec to happen (such problems were observed for igb and forcedeth). For this purpose seperate e1000_shutdown() from e1000_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gianfar: stop send queue before resetting gianfarMarkus Brunner2009-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After a transmit timed out, the reset task will be called, which will free the allocated resources(stop_gfar). If gfar_poll will be called before the resources get allocated again gfar_clean_tx_ring will call dev_kfree_skb_any(NULL). Example crash: ops: Kernel access of bad area, sig: 11 [#1] PREEMPT RSBBA100 Modules linked in: NIP: c01a10c4 LR: c013b254 CTR: c013c038 REGS: c02e7d20 TRAP: 0300 Not tainted (2.6.27.20) MSR: 00001032 <ME,IR,DR> CR: 24000082 XER: 20000000 DAR: 000000a0, DSISR: 20000000 TASK = c02ce578[0] 'swapper' THREAD: c02e6000 GPR00: 000000a0 c02e7dd0 c02ce578 00000000 00000040 00000001 c02ec1c0 00001032 GPR08: c080d1e0 df9ea800 00000000 00000000 24000082 ffffffff 0404f000 00000000 GPR16: ffffffbf ffffffff ffffffff ffdff7ff ffffffff c02d0fd4 00100100 00200200 GPR24: c031220c 00000001 00000001 00000000 00000000 df849800 ff109000 df849b80 NIP [c01a10c4] dev_kfree_skb_irq+0x18/0x70 LR [c013b254] gfar_clean_tx_ring+0x70/0x11c Call Trace: [c02e7dd0] [c003e978] update_wall_time+0x730/0x744 (unreliable) [c02e7df0] [c013b254] gfar_clean_tx_ring+0x70/0x11c [c02e7e10] [c013c07c] gfar_poll+0x44/0x150 [c02e7e30] [c01a064c] net_rx_action+0xa8/0x19c [c02e7e70] [c00251d4] __do_softirq+0x64/0xc0 [c02e7e90] [c0006384] do_softirq+0x40/0x58 [c02e7ea0] [c00250a8] irq_exit+0x40/0x9c [c02e7eb0] [c000642c] do_IRQ+0x90/0xac [c02e7ec0] [c0010ab4] ret_from_except+0x0/0x14 --- Exception: 501 at cpu_idle+0x9c/0xf8 LR = cpu_idle+0x9c/0xf8 [c02e7f80] [c0009820] cpu_idle+0x58/0xf8 (unreliable) [c02e7fa0] [c01fb8c8] __got2_end+0x7c/0x90 [c02e7fc0] [c026c794] start_kernel+0x2c0/0x2d4 [c02e7ff0] [00003438] 0x3438 Instruction dump: 7fa00124 80010024 bba10014 38210020 7c0803a6 4e800020 9421ffe0 7c0802a6 7c6b1b78 90010024 380300a0 bfa10014 <7d200028> 3129ffff 7d20012d 40a2fff4 Kernel panic - not syncing: Fatal exception in interrupt This Patch calls netif_stop_queue before calling stop_gfar. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * myr10ge: again fix lro_gen_skb() alignmentStanislaw Gruszka2009-04-15
| | | | | | | | | | | | | | | | | | | | | | Add LRO alignment initially committed in 621544eb8c3beaa859c75850f816dd9b056a00a3 ("[LRO]: fix lro_gen_skb() alignment") and removed in 0dcffac1a329be69bab0ac604bf7283737108e68 ("myri10ge: add multislices support") during conversion to multi-slice. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * declance: convert to net_device_opsAlexander Beregalov2009-04-15
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bfin_mac: convert to net_device_opsAlexander Beregalov2009-04-15
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * au1000: convert to net_device_opsAlexander Beregalov2009-04-15
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * atarilance: convert to net_device_opsAlexander Beregalov2009-04-15
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * a2065: convert to net_device_opsAlexander Beregalov2009-04-15
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: update real_num_tx_queues on changing num_rx_queuesWu Fengguang2009-04-15
| | | | | | | | | | | | | | | | | | | | Move the update of real_num_tx_queues from ixgbe_acquire_msix_vectors() to ixgbe_set_num_queues(), to ensure it be always in sync with num_tx_queues. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbe: fix tx queue indexWu Fengguang2009-04-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't do the num_tx_queues based masking on calculating tx queue index. 1) num_tx_queues is not always power-of-2, because it also depends on the online cpu numbers. So the masking could be a performance bug on a 6 cpu system. 2) queue_mapping will be limited by real_num_tx_queues=num_tx_queues in the generic netdev function set_cur_queue_map(). So the bound limiting here is not necessary. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: Use correct macro to set event bitfieldBen Hutchings2009-04-14
| | | | | | | | | | | | | | | | | | | | | | falcon_sim_phy_event() used EFX_OWORD_FIELD, which operates on bitfields in 128-bit values, on an event, which is a 64-bit value. This should be harmless - these macros always use little-endian ordering, so it would read and write back the following 8 bytes unchanged - but it is obviously wrong. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: Match calls to netif_napi_add() and netif_napi_del()Ben Hutchings2009-04-14
| | | | | | | | | | | | | | | | | | | | | | sfc could call netif_napi_add() multiple times for the same napi_struct, corrupting the list of napi_structs for the associated device and leading to a busy-loop on device removal. Move the call to netif_napi_add() and add a call to netif_napi_del() in the obvious places. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Remove debug printkJay Vosburgh2009-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove debug printk I accidently left in as part of commit: commit 6146b1a4da98377e4abddc91ba5856bef8f23f1e Author: Jay Vosburgh <fubar@us.ibm.com> Date: Tue Nov 4 17:51:15 2008 -0800 bonding: Fix ALB mode to balance traffic on VLANs Reported by Duncan Gibb <duncan.gibb@siriusit.co.uk> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000/e1000: fix compile warningJesse Brandeburg2009-04-14
| | | | | | | | | | | | | | | | | | | | e1000/e1000e compile report a possible unused variable, fix that for now. Shortly after this a small refactor and bug fix will follow in the same code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ehea: Fix incomplete conversion to net_device_opsAlexander Beregalov2009-04-14
| | | | | | | | | | | | Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * skge: fix occasional BUG during MTU changeMichal Schmidt2009-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean) in skge_up() was sometimes observed when setting MTU. skge_down() disables the TX queue, but then reenables it by mistake via skge_tx_clean(). Fix it by moving the waking of the queue from skge_tx_clean() to the other caller. And to make sure start_xmit is not in progress on another CPU, skge_down() should call netif_tx_disable(). The bug was reported to me by Jiri Jilek whose Debian system sometimes failed to boot. He tested the patch and the bug did not happen anymore. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tun: Fix crash with non-GSO usersHerbert Xu2009-04-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When I made the tun driver use non-linear packets as the preferred option, it broke non-GSO users because they would end up allocating a completely non-linear packet, which triggers a crash when we call eth_type_trans. This patch reverts non-GSO users to using linear packets and adds a check to ensure that GSO users can't cause crashes in the same way. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: fix for default setting of pause auto-negotiationAjit Khaparde2009-04-13
| | | | | | | | | | | | | | | | This patch fixes the default value of pause auto-negotiation supported by PCS. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * eth_v10: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ioc3-eth: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * isa-skeleton: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mac89x0: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macb: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * macsonic: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sun3_82586: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tc35815: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tsi108_eth: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * xtsonic: convert to net_device_opsAlexander Beregalov2009-04-13
| | | | | | | | | | Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * phylib: Add interrupt source check function to M88E1121R driverAnatolij Gustschin2009-04-13
| | | | | | | | | | | | | | | | | | | | | | Add did_interrupt() function to check if a PHY port really caused an interrupt. This is needed in the case of shared PHY interrupt pin configuration to stop interrupt event processing for PHY ports which didn't cause an interrupt. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * phylib: Allow early-out in phy_changeAnatolij Gustschin2009-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-28 08:36:14 -0500