aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] sky2: add irq to entropy poolStephen Hemminger2006-02-07
| | | | | | | The sky2 interrupt can be used to add entropy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sky2: clear irq raceStephen Hemminger2006-02-07
| | | | | | | | Move the interrupt clear to before processing, this avoids a possible races with status delaying. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sky2: set mac address fixStephen Hemminger2006-02-07
| | | | | | | | | | | | | | | | | | | Using the sky2 driver with bonding can result in oopses related to reinitializing the PHY when the MAC address is changed (which bonding is wont to do). This patch changes sky2_set_mac_address to take less drastic measures. This is analagous to the skge patch here: http://lkml.org/lkml/2005/9/29/399 which fixed the issue here: http://bugzilla.kernel.org/show_bug.cgi?id=5271 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sky2: ethtool rx_coalesce settings fixStephen Hemminger2006-02-07
| | | | | | | | | This fixes setting rx_coalesce_usecs_irq via ethtool in sky2. The write was directed to the wrong register. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sky2: pci config space checkingStephen Hemminger2006-02-07
| | | | | | | | | | | | There were bugs in mmconfig access to PCI space, up to and include 2.6.16-rc1. These prevented the sky2 driver from being able to clear PCI express errors. This patch makes the driver check (during probe), for errors in PCI config access and fail. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sky2: power management fixStephen Hemminger2006-02-07
| | | | | | | | | Fix suspend/resume for sky2. The status ring was getting reallocated and a bunch of other mistakes. Also, check return from power_state on resume. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* [PATCH] sis900: remove cfgpmcsr I/O space register defineLennert Buytenhek2006-02-07
| | | | | | | | | sis900 defines 'cfgpmcsr' as an I/O space register, but CFGPMCSR is in fact a config space register, and there is no register at offset 0x44 in I/O space, so delete the enum. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* e100: remove init_hw call to fix panicJesse Brandeburg2006-02-07
| | | | | | | | | | e100 seems to have had a long standing bug where e100_init_hw was being called when it should not have been. This caused a panic due to recent changes that rely on correct set up in the driver, and more robust error paths. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* Merge branch 'release' of ↵Linus Torvalds2006-02-06
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
| * Pull sgi-drivers-makefile-cleanup into release branchTony Luck2006-02-02
| |\
| | * [PATCH] drivers/sn/ must be entered for CONFIG_SGI_IOC3Jes Sorensen2006-01-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Actually I think this is more appropriate so we don't end up with 17 cases that add drivers/sn to the build lib. Include drivers/sn when CONFIG_IA64_SGI_SN2 or CONFIG_IA64_GENERIC is enabled. Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | | [PPP]: Fixed hardware RX checksum handlingHerbert Xu2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we pull the PPP protocol off the skb, we forgot to update the hardware RX checksum. This may lead to messages such as dsl0: hw csum failure. Similarly, we need to clear the hardware checksum flag when we use the existing packet to store the decompressed result. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | [PATCH] USB: Fix GPL markings on usb core functions.Greg KH2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | I thought we had fixed up all non-gpl USB drivers, and was wrong to do this. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] pktcdvd: Don't waste kernel memoryPeter Osterlund2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate memory for read-gathering at open time, when it is known just how much memory is needed. This avoids wasting kernel memory when the real packet size is smaller than the maximum packet size supported by the driver. This is always the case when using DVD discs. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] Let CDROM_PKTCDVD_WCACHE depend on EXPERIMENTALAdrian Bunk2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | Unless the help text is outdated, this seems to be logical. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] pktcdvd: remove version stringPeter Osterlund2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | The version information is not useful for a driver that is maintained in Linus' kernel tree. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] pktcdvd: Fix overflow for discs with large packetsPhillip Susi2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pktcdvd driver was using an 8 bit field to store the packet length obtained from the disc track info. This causes it to overflow packet length values of 128KB or more. I changed the field to 32 bits to fix this. The pktcdvd driver defaulted to its maximum allowed packet length when it detected a 0 in the track info field. I changed this to fail the operation and refuse to access the media. This seems more sane than attempting to access it with a value that almost certainly will not work. Signed-off-by: Peter Osterlund <petero2@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] Fix i2o_scsi oops on abortMarkus Lidel2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix http://bugzilla.kernel.org/show_bug.cgi?id=5923 When a scsi command failed, an oops would result. Back-to-back SMART queries would make the Seagate drives unhappy. The second SMART query would timeout, and the command would be aborted. Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Kenny Simpson <theonetruekenny@yahoo.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] percpu data: only iterate over possible CPUsEric Dumazet2006-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | percpu_data blindly allocates bootmem memory to store NR_CPUS instances of cpudata, instead of allocating memory only for possible cpus. As a preparation for changing that, we need to convert various 0 -> NR_CPUS loops to use for_each_cpu(). (The above only applies to users of asm-generic/percpu.h. powerpc has gone it alone and is presently only allocating memory for present CPUs, so it's currently corrupting memory). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jens Axboe <axboe@suse.de> Cc: Anton Blanchard <anton@samba.org> Acked-by: William Irwin <wli@holomorphy.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] x86_64: data/functions wrongly marked as __init with cpu hotplug.Ashok Raj2006-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | attached patch is 2 more cases i found via running the reference_init.pl script. These were easy to spot just knowing the file names. There is one another about init/main.c that i cant exactly zero in. (partly because i dont know how to interpret the data thats spewed out of the tool). Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] x86_64: Remove rogue default y in EDAC KconfigAndi Kleen2006-02-04
| | | | | | | | | | | | | | | Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] x86_64: Only switch to IPI broadcast timer on Intel when C3 is supportedVenkatesh Pallipadi2006-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Bug in apic timer removal on C3 patch. We should switch to IPI from APIC timer only when C3 state is valid. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds2006-02-03
|\ \ \
| * | | [PARISC] Clean up printk in superio.cKyle McMartin2006-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up some of the messages printed by the superio driver by defining a prefix instead of duplicating it in every message. Also some small coding style cleanups. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
| * | | [PARISC] Add chassis_power_off routineKyle McMartin2006-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define a chassis_power_off routine that machines which have a way to turn off the power supply can hook into. Formerly they were using pm_power_off, which is now being used by generic code. Make lasi.c use chassis_power_off instead of pm_power_off. Note, all machines need to call machine_power_off so that the switch can power off the machine, though halt -p may not necessarily be able to work properly on the machine. Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
| * | | [PARISC] pdc_stable version 0.22Thibaut VARENE2006-01-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pdc_stable v0.22, changes since v0.10: o renamed root subsystem from 'pdc' to 'stable' o split 'info' into several files, one per PDC field o implemented 'autoboot' and 'autosearch' write calls to toggle these flags o grant read permission to all users on "safe" files o more code cleanup (removed duplicate code) o avoid bad stable storage clobbering by write locking critical sections o print consistent data as well o SMP cleanups Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
| * | | [PARISC] Use kzalloc and other janitor-style cleanupsHelge Deller2006-01-22
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Helge, o Convert a bunch of kmalloc/memset uses to kzalloc. o pci.c: Add some __read_mostly annotations. o pci.c: Move constant pci_post_reset_delay to asm/pci.h o grfioctl.h: Add A4450A to comment of CRT_ID_VISUALIZE_EG. o Add some consts to perf.c/perf_images.h Matthew, o sticore.c: Add some consts to suppress compile warnings. Signed-off-by: Helge Deller <deller@parisc-linux.org> Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-02-03
|\ \ \
| * | | [SERIAL] 8250: limit range of runtime portsRussell King2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | Prevent SERIAL_8250_RUNTIME_UARTS being larger than SERIAL_8250_NR_UARTS. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [SERIAL] initialize spinlock for port failed to setup consoleAtsushi Nemoto2006-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems serial_core intend to initialize port->lock just once for each ports. This is done in uart_set_options() for console, and in uart_add_one_port() for other ports. But there is a case the port->lock is not initialized by serial_core. If the setup function for the console was failed, it will not call uart_set_options() but the port is marked as console (uart_console(port) returns 1). It can happen if console was PCI port which can not detected at the time of register_console. This patch is to initialize port->lock for such console port. With this change, most of spin_lock_init() (some of them are labeled "Temporary fix.") in low-level serial drivers can be omitted. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | [SERIAL] SIIG 8-port serial boards supportAndrey Panin2006-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for SIIG 8-port boards. These boards have 4 ports in separate bars and another 4 ports in the single bar. Because of this strange port arrangement these cards need special setup function. Fortunately no other SIIG cards have more than 4 port, so this setup function could be used for them too. Signed-off-by: Andrey Panin <pazke@donpac.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds2006-02-03
|\ \ \ \
| * | | | [MMC] Add MMC command type flagsRussell King2006-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some hosts need to know the command type, so pass it via a set of flags in cmd->flags. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2006-02-03
|\ \ \ \ \
| * | | | | [TG3]: Update driver version and release date.David S. Miller2006-02-02
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | [TG3]: Flush tg3_reset_task()Michael Chan2006-02-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure tg3_reset_task() is flushed in the close and suspend paths as noted by Jeff Garzik. In the close path, calling flush_scheduled_work() may cause deadlock if linkwatch_event() is on the workqueue. linkwatch_event() will try to get the rtnl_lock() which is already held by tg3_close(). So instead, we set a flag in tg3_reset_task() and tg3_close() polls the flag until it is cleared. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | | [PATCH] IDE: always enable CONFIG_PDC202XX_FORCEAdrian Bunk2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the CONFIG_PDC202XX_FORCE=n case. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] RocketPoint 1520 [hpt366] fails clock stabilizationLoren M. Lang2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I just purchased a HighPoint Rocket 1520 SATA controller. There seems to be no libata driver (yet), but there is an ide driver, hpt366. When the driver gets loaded, it causes a kernel NULL pointer dereference in pci_bus_clock_list. It seems to be because the driver is waiting for clock stabilization in init_hpt37x() which never comes. The driver just continues on with the pci drvdata set to NULL, instead of a valid clock entry. The following patch prevents the NULL dereference from happening, but instead exit with an error. Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide: set latency when resetting it821x out of firmware modeAlan Cox2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide-disk: Restore missing space in log messageJean Delvare2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restore a missing space in a log message, which was accidentally removed by a previous change: 3e087b575496b8aa445192f58e7d996b1cdfa121 Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <axboe@suse.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] drivers/ide/ide-io.c: make __ide_end_request() staticAdrian Bunk2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since there's no longer any external user, we can make __ide_end_request() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] solve false-positive soft lockup messages during IDE initIngo Molnar2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Rogio Brito <rbrito@ime.usp.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] stop CompactFlash devices being marked as removableRichard Purdie2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch stops CompactFlash devices being marked as removable. They are not removable (as defined by Linux) as the media and device are inseparable. When a card is removed, the whole device is removed from the system and never sits in a media-less state. This stops some nasty udev device creation/destruction loops. Further, once this change is made, there is no need for ide to can be removed from ide_drive_t. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ide Kconfig fixesAndreas Mohr2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_BLK_DEV_IDECS docu mentions everything and the kitchen sink, yet fails to list the most important/widespread (IMHO) device: Compact Flash PCMCIA adapters. This incomplete description recently caused me to deselect the ide_cs module, causing great pain soon thereafter when I realized why I had actually enabled it some years ago. Updates: - make sure to mention Compact Flash adapters - fix some random typos in ide Kconfig Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ia64: drop arch-specific IDE MAX_HWIFS definitionBjorn Helgaas2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no reason MAX_HWIFS needs to be ia64-specific, so set MAX_HWIFS from CONFIG_IDE_MAX_HWIFS. This reduces the default from 10 to 4, but I don't think that's a problem. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] piix: add Intel ICH8M device IDsJason Gaston2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jason Gaston <Jason.d.gaston@intel.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] IPMI: fix issues reported by Coverity in ipmi_msghandler.cJayachandran C2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While looking to the report by Coverity in ipmi, I came across the following issue: The IPMI message handler relies on two defines which are the same -one in include/linux/ipmi.h #define IPMI_NUM_CHANNELS 0x10 and one in drivers/char/ipmi/ipmi_msghandler. #define IPMI_MAX_CHANNELS 16 These are used interchangeably in ipmi_msghandler.c, but since the array addr->channels[] is of size IPMI_MAX_CHANNELS, I have made a patch that uses IPMI_MAX_CHANNELS for all the checks for the array index. NOTE: You could probably remove the line that defines IPMI_NUM_CHANNELS from ipmi.h, or move IPMI_MAX_CHANNELS to ipmi.h Signed-off-by: Jayachandran C. <c.jayachandran@gmail.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] i4l: warning fixesKarsten Keil2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/isdn/hisax/hscx_irq.c: In function `hscx_interrupt': drivers/isdn/hisax/hscx_irq.c:201: warning: comparison is always 1 due to width of bit-field It's due to (PACKET_NOACK != bcs->tx_skb->pkt_type) pkt_type is only three bit wide. I think this should fix it for the moment, pkt_type 7 is not used yet and this is only used internal in hisax. Signed-off-by: Karsten keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] ip2main.c warning fixesAndrew Morton2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With Eric's "i386: Add a temporary to make put_user more type safe" patch we get a pile of warnings out of ip2m1in.c: drivers/char/ip2main.c: In function `ip2_ipl_ioctl': drivers/char/ip2main.c:2910: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2911: warning: assignment makes integer from pointer without a cast drivers/char/ip2main.c:2912: warning: assignment makes integer from pointer without a cast etc. This ioctl is copying the kernel virtual address of a large number of functions out to userspace. Heaven knows why. Rather than fixing the warnings, I think we'll just nuke that code. The patch also fixes a couple of `defined but not used' warnings. Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | | [PATCH] edac_mc: Remove include of version.hEric W. Biederman2006-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By including version.h edac_mc was rebuilding on every incremental build. Which defeats the point of incremental builds. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-29 09:11:16 -0500