aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] EDAC: kobject/sysfs fixesDave Peterson2006-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - After we unregister a kobject, wait for our kobject release method to call complete(). This causes us to wait until the kobject reference count reaches 0. Otherwise, a task accessing the EDAC sysfs interface can hold the reference count above 0 until after the EDAC module has been unloaded. When the reference count finally drops to 0, this will result in an attempt to call our release method inside the EDAC module after the module has already been unloaded. This isn't the best fix, since a process can get stuck sleeping forever uninterruptibly if the user does the following: rmmod my_module < /sys/my_sysfs/file I'll go back and implement a better fix later. However this should be ok for now. - Call edac_remove_sysfs_mci_device() from edac_mc_del_mc() rather than from edac_mc_free(). Since edac_mc_add_mc() calls edac_create_sysfs_mci_device(), edac_mc_del_mc() should call edac_remove_sysfs_mci_device(). Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: kobject_init/kobject_put fixesDave Peterson2006-03-26
| | | | | | | | | | | | | | | - Remove calls to kobject_init(). These are unnecessary because kobject_register() calls kobject_init(). - Remove extra calls to kobject_put(). When we call kobject_unregister(), this releases our reference to the kobject. The extra calls to kobject_put() may cause the reference count to drop to 0 while a kobject is still in use. Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: edac_mc_add_mc fix [2/2]Dave Peterson2006-03-26
| | | | | | | | | | | This is part 2 of a 2-part patch set. Fix edac_mc_add_mc() so it cleans up properly if call to edac_create_sysfs_mci_device() fails. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: edac_mc_add_mc fix [1/2]Dave Peterson2006-03-26
| | | | | | | | | | | | | | | This is part 1 of a 2-part patch set. The code changes are split into two parts to make the patches more readable. Move complete_mc_list_del() and del_mc_from_global_list() so we can call del_mc_from_global_list() from edac_mc_add_mc() without forward declarations. Perhaps using forward declarations would be better? I'm doing things this way because the rest of the code is missing them. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: cleanup code for clearing initial errorsDave Peterson2006-03-26
| | | | | | | | | | Fix xxx_probe1() functions so they call xxx_get_error_info() functions to clear initial errors. This is simpler and cleaner than duplicating the low-level code for accessing PCI config space. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: e7xxx fix minor logic bugDave Peterson2006-03-26
| | | | | | | | Fix minor logic bug in e7xxx_remove_one(). Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: i82875p cleanupDave Peterson2006-03-26
| | | | | | | | | | | - Fix i82875p_probe1() so it calls pci_get_device() instead of pci_find_device(). - Fix i82875p_probe1() so it cleans up properly on failure. - Fix i82875p_init() so it cleans up properly on failure. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: i82860 cleanupDave Peterson2006-03-26
| | | | | | | | | | - Fix i82860_init() so it cleans up properly on failure. - Fix i82860_exit() so it cleans up properly. - Fix typo in comment (i.e. www.redhat.com.com). Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: e752x cleanupDave Peterson2006-03-26
| | | | | | | | | | | | - Add ctl_dev field to "struct e752x_dev_info". Then we can eliminate ugly switch statement from e752x_probe1(). - Remove code from e752x_probe1() that clears initial PCI bus parity errors. The core EDAC module already does this. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: amd76x pci_dev_get/pci_dev_put fixesDave Peterson2006-03-26
| | | | | | | | | | Eliminate unnecessary calls to pci_dev_get() and pci_dev_put() from amd76x driver. Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: name cleanupDave Peterson2006-03-26
| | | | | | | | | | | | | | | | | Perform the following name substitutions on all source files: sed 's/BS_MOD_STR/EDAC_MOD_STR/g' sed 's/bs_thread_info/edac_thread_info/g' sed 's/bs_thread/edac_thread/g' sed 's/bs_xstr/edac_xstr/g' sed 's/bs_str/edac_str/g' The names that start with BS_ or bs_ are artifacts of when the code was called "bluesmoke". Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: printk cleanupDave Peterson2006-03-26
| | | | | | | | | | | | | | | | | | | | | This implements the following idea: On Monday 30 January 2006 19:22, Eric W. Biederman wrote: > One piece missing from this conversation is the issue that we need errors > in a uniform format. That is why edac_mc has helper functions. > > However there will always be errors that don't fit any particular model. > Could we add a edac_printk(dev, ); That is similar to dev_printk but > prints out an EDAC header and the device on which the error was found? > Letting the rest of the string be user specified. > > For actual control that interface may be to blunt, but at least for people > looking in the logs it allows all of the errors to be detected and > harvested. Signed-off-by: David S. Peterson <dsp@llnl.gov> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EDAC: switch to kthread_ APIDave Peterson2006-03-26
| | | | | | | | | | | | | | | | | This patch was originally posted by Christoph Hellwig (see http://lkml.org/lkml/2006/2/14/331): "Christoph Hellwig" <hch@lst.de> wrote: > Use the kthread_ API instead of opencoding lots of hairy code for kernel > thread creation and teardown, including tasklist_lock abuse. > Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Peterson <dsp@llnl.gov> Cc: <dave_peterson@pobox.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Dead code in drivers/isdn/avm/avmcard.hEric Sesterhenn2006-03-26
| | | | | | | | | | This fixes coverity id #2. the if (i==0) is pretty useless, since we assing i=0, just the line before. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapterHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the connection-specific module "usb_gigaset", the hardware driver for Gigaset base stations connected via the M105 USB DECT adapter. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination, as well as handling asynchronous data transfers, PPP framing, byte stuffing, and flow control. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - isochronous data handlerHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the payload data handler for the connection-specific module "bas_gigaset". It contains the code for handling isochronous data transfers, HDLC framing and flow control. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connectionHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the main source file of the connection-specific module "bas_gigaset", the hardware driver for Gigaset base stations connected directly to the computer via USB. It contains the code for handling probe/disconnect, AT command/response transmission, and call setup and termination. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - procfs interfaceHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the procfs interface to the gigaset module. The procfs interface provides access to status information and statistics about the Gigaset devices. If the drivers are built with the debugging option it also allows to change the amount of debugging output on the fly. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - tty interfaceHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the tty interface to the gigaset module. The tty interface provides direct access to the AT command set of the Gigaset devices. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - isdn4linux interfaceHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the isdn4linux subsystem interface to the gigaset module. The isdn4linux subsystem interface handles requests from and notifications to the isdn4linux subsystem. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - event layerHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the event layer to the gigaset module. The event layer serializes events from hardware, userspace, and other kernel subsystems. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - common moduleHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> This patch adds the common include file for the Siemens Gigaset drivers, providing definitions used by all of the Gigaset ISDN driver source files. It also adds the main source file of the gigaset module which manages common functions not specific to the type of connection to the device. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isdn4linux: Siemens Gigaset drivers - Kconfigs and MakefilesHansjoerg Lipp2006-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And: Tilman Schmidt <tilman@imap.cc> The following patches add drivers for the Siemens Gigaset 3070 family of ISDN DECT PABXes connected via USB, either directly or over a DECT link using a Gigaset M105 or compatible DECT data adapter. The devices are integrated as ISDN adapters within the isdn4linux framework, supporting incoming and outgoing voice and data connections, and also as tty devices providing access to device specific AT commands. Supported devices include models 3070, 3075, 4170, 4175, SX205, SX255, and SX353 from the Siemens Gigaset product family, as well as the technically identical models 45isdn and 721X from the Deutsche Telekom Sinus series. Supported DECT adapters are the Gigaset M105 data and the technically identical Gigaset USB Adapter DECT, Sinus 45 data 2, and Sinus 721 data (but not the Gigaset M34 and Sinus 702 data which advertise themselves as CDC-ACM devices). These drivers have been developed over the last four years within the SourceForge project http://sourceforge.net/projects/gigaset307x/. They are being used successfully in several installations for dial-in Internet access and for voice call switching with Asterisk. This is our second attempt at submitting these drivers, taking into account the comments we received to our first submission on 2005-12-11. The patch set adds three kernel modules: - a common module "gigaset" encapsulating the common logic for controlling the PABX and the interfaces to userspace and the isdn4linux subsystem. - a connection-specific module "bas_gigaset" which handles communication with the PABX over a direct USB connection. - a connection-specific module "usb_gigaset" which does the same for a DECT connection using the Gigaset M105 USB DECT adapter. We also have a module "ser_gigaset" which supports the Gigaset M101 RS232 DECT adapter, but we didn't judge it fit for inclusion in the kernel, as it does direct programming of a i8250 serial port. It should probably be rewritten as a serial line discipline but so far we lack the neccessary knowledge about writing a line discipline for that. The drivers have been working with kernel releases 2.2 and 2.4 as well as 2.6, and although we took efforts to remove the compatibility code for this submission, it probably still shows in places. Please make allowances. This patch: Prepare the kernel build infrastructure for addition of the Gigaset ISDN drivers. It creates a Makefile and Kconfig file for the Gigaset driver and hooks them into those of the isdn4linux subsystem. It also adds a MAINTAINERS entry for the driver. This patch depends on patches 2 to 9 of the present set, as without the actual source files, activating the options added here will cause the kernel build to fail. Signed-off-by: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <kkeil@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use mempool_create_slab_pool()Matthew Dobson2006-03-26
| | | | | | | | | | Modify well over a dozen mempool users to call mempool_create_slab_pool() rather than calling mempool_create() with extra arguments, saving about 30 lines of code and increasing readability. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use common mempool kzalloc allocatorMatthew Dobson2006-03-26
| | | | | | | | | | This patch changes a mempool user, which is basically just a wrapper around kzalloc(), to use the common mempool_kmalloc/kfree, rather than its own wrapper function, removing duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use common mempool kmalloc allocatorMatthew Dobson2006-03-26
| | | | | | | | | | This patch changes several mempool users, all of which are basically just wrappers around kmalloc(), to use the common mempool_kmalloc/kfree, rather than their own wrapper function, removing a bunch of duplicated code. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] mempool: use common mempool page allocatorMatthew Dobson2006-03-26
| | | | | | | | | | | Convert two mempool users that currently use their own mempool-backed page allocators to use the generic mempool page allocator. Also included are 2 trivial whitespace fixes. Signed-off-by: Matthew Dobson <colpatch@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: minor cleanupsSteffen Klassert2006-03-26
| | | | | | | | Remove some whitespaces and codingstyle issues. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: remove per-driver versioningSteffen Klassert2006-03-26
| | | | | | | | Remove per-driver versioning. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: use ethtool_op_get_linkSteffen Klassert2006-03-26
| | | | | | | | Use ethtool_op_get_link instead of vortex_get_link. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: carriercheck for forced mediaSteffen Klassert2006-03-26
| | | | | | | | Handle netif_carrier_{on,of} also if media is forced to 10baseT/100baseTx. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: decrease polling intervalSteffen Klassert2006-03-26
| | | | | | | | | Set the polling interval for media changes to 5 seconds if link is down and 60 seconds if link is up. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 3c59x: use mii_check_mediaSteffen Klassert2006-03-26
| | | | | | | | | Check for media changes and netif_carrier by using mii_check_media() if mii is used. Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Update documentation for BLK_DEV_INITRD to match current usageH. Peter Anvin2006-03-26
| | | | | | | | | Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Zdenek Pavlas <pavlas@nextra.cz> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] isicom: select FW_LOADERmaximilian attems2006-03-26
| | | | | | | | | The isicom driver uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ads7846: sparc32 warning fixAndrew Morton2006-03-26
| | | | | | | | | | drivers/input/touchscreen/ads7846.c: In function `ads7846_read12_ser': drivers/input/touchscreen/ads7846.c:207: warning: implicit declaration of function `disable_irq' drivers/input/touchscreen/ads7846.c:209: warning: implicit declaration of function `enable_irq' Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] tlclk: fix handling of device majorAndrew Morton2006-03-26
| | | | | | | | | | | | | | | | | tlclk calls register_chrdev() and permits register_chrdev() to allocate the major, but it promptly forgets what that major was. So if there's no hardware present you still get "telco_clock" appearing in /proc/devices and, I assume, an oops reading /proc/devices if tlclk was a module. Fix. Mark, I'd suggest that that we not call register_chrdev() until _after_ we've established that the hardware is present. Cc: Mark Gross <mgross@linux.intel.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] loop: potential kernel hang waiting for kthreadHerbert Poetzl2006-03-26
| | | | | | | | | Check that kernel_thread() succeeded, so we don't wait for something which cannot happen. Signed-off-by: Herbert Poetzl <herbert@13thfloor.at> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ipmi: Increment driver version to v39.0Corey Minyard2006-03-26
| | | | | | | | | | | Need to increment the version number because of the new PCI and sysfs capabilities of the driver. People maintaining things for distros have asked that I do this after interface or major functional changes. Signed-off-by: Corey Minyard <minyard@acm.org> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ipmi: add full sysfs supportCorey Minyard2006-03-26
| | | | | | | | | | | | | | | | | | | | | | | | Add full driver model support for the IPMI driver. It links in the proper bus and device support. It adds an "ipmi" driver interface that has each BMC discovered by the driver (as a device). These BMCs appear in the devices/platform directory. If there are multiple interfaces to the same BMC, the driver should discover this and will only have one BMC entry. The BMC entry will have pointers to each interface device that connects to it. The device information (statistics and config information) has not yet been ported over to the driver model from proc, that will come later. This work was based on work by Yani Ioannou. I basically rewrote it using that code as a guide, but he still deserves credit :). [bunk@stusta.de: make ipmi_find_bmc_guid() static] Signed-off-by: Corey Minyard <minyard@acm.org> Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ipmi: add generic PCI handlingCorey Minyard2006-03-26
| | | | | | | | | | | | | Modify the PCI hanling code for the IPMI driver to use the new method of tables and registering, and adds more generic PCI handling for IPMI. Unfortunately, this required a rather large rework of the way the driver did detection so it would be more event-driven. [bunk@stusta.de: make a struct static] Signed-off-by: Corey Minyard <minyard@acm.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sem2mutex: misc static one-file mutexesIngo Molnar2006-03-26
| | | | | | | | | | | | | | | | | | | | | | Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jens Axboe <axboe@suse.de> Cc: Neil Brown <neilb@cse.unsw.edu.au> Acked-by: Alasdair G Kergon <agk@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ACPI: clean up memory attribute checking for map/read/writeBjorn Helgaas2006-03-26
| | | | | | | | | | | | | | ia64 ioremap is now smart enough to use the correct memory attributes, so remove the EFI checks from osl.c. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EFI fixesTolentino, Matthew E2006-03-26
| | | | | | | | | | | | | | Here's a patch that fixes EFI boot for x86 on 2.6.16-rc5-mm3. The off-by-one is admittedly my fault, but the other two fix up the rest. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EFI: keep physical table addresses in efi structureBjorn Helgaas2006-03-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | Almost all users of the table addresses from the EFI system table want physical addresses. So rather than doing the pa->va->pa conversion, just keep physical addresses in struct efi. This fixes a DMI bug: the efi structure contained the physical SMBIOS address on x86 but the virtual address on ia64, so dmi_scan_machine() used ioremap() on a virtual address on ia64. This is essentially the same as an earlier patch by Matt Tolentino: http://marc.theaimsgroup.com/?l=linux-kernel&m=112130292316281&w=2 except that this changes all table addresses, not just ACPI addresses. Matt's original patch was backed out because it caused MCAs on HP sx1000 systems. That problem is resolved by the ioremap() attribute checking added for ia64. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] EFI, /dev/mem: simplify efi_mem_attribute_range()Bjorn Helgaas2006-03-26
| | | | | | | | | | | | | | | | | | Pass the size, not a pointer to the size, to efi_mem_attribute_range(). This function validates memory regions for the /dev/mem read/write/mmap paths. The pointer allows arches to reduce the size of the range, but I think that's unnecessary complexity. Simplifying it will let me use efi_mem_attribute_range() to improve the ia64 ioremap() implementation. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: "Tolentino, Matthew E" <matthew.e.tolentino@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@muc.de> Acked-by: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers/block/floppy.c: dont free_irq() from irq contextIngo Molnar2006-03-26
| | | | | | | | | | | | | | free_irq() should not be executed from softirq context. Found by the lock validator. The fix is to push fd_free_irq() into keventd. The code validates fine with this patch applied. (akpm: this is revolting, but so is floppy.c) [akpm@osdl.org: added flush_scheduled_work()] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/home/rmk/linux-2.6-serialLinus Torvalds2006-03-25
|\ | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-serial: [ARM] 3383/3: ixp2000: ixdp2x01 platform serial conversion [SERIAL] amba-pl010: Remove accessor macros [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI) [SERIAL] icom: select FW_LOADER
| * [SERIAL] amba-pl010: Remove accessor macrosRussell King2006-03-25
| | | | | | | | | | | | | | Remove unnecessary accessor macros, using readb/writel directly instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [SERIAL] remove 8250_acpi (replaced by 8250_pnp and PNPACPI)Bjorn Helgaas2006-03-25
| | | | | | | | | | | | | | With the combination of PNPACPI and 8250_pnp, we no longer need 8250_acpi. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-18 08:27:11 -0500