aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] md: raid10 read-error handling - resync and read-onlyNeilBrown2006-01-06
| | | | | | | | | | | | | | | | | | Add in correct read-error handling for resync and read-only situations. When read-only, we don't over-write, so we need to mark the failed drive in the r10_bio so we don't re-try it. During resync, we always read all blocks, so if there is a read error, we simply over-write it with the good block that we found (assuming we found one). Note that the recovery case still isn't handled in an interesting way. There is nothing useful to do for the 2-copies case. If there are 3 or more copies, then we could try reading from one of the non-missing copies, but this is a bit complicated and very rarely would be used, so I'm leaving it for now. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: auto-correct correctable read errors in raid10NeilBrown2006-01-06
| | | | | | | | Largely just a cross-port from raid1. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: make sure read error on last working drive of raid1 actually ↵NeilBrown2006-01-06
| | | | | | | | | | | | returns failure We are inadvertently setting the R1BIO_Uptodate bit on read errors when we decide not to try correcting (because there are no other working devices). This means that the read error is reported to the client as success. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow raid1 to check consistencyNeilBrown2006-01-06
| | | | | | | | | | Where performing a user-requested 'check' or 'repair', we read all readable devices, and compare the contents. We only write to blocks which had read errors, or blocks with content that differs from the first good device found. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: support check-without-repair of raid10 arraysNeilBrown2006-01-06
| | | | | | | | Also keep count on the number of errors found. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix up some rdev rcu locking in raid5/6NeilBrown2006-01-06
| | | | | | | | | | | | | | | | | | | | | | | There is this "FIXME" comment with a typo in it!! that been annoying me for days, so I just had to remove it. conf->disks[i].rdev should only be accessed if - we know we hold a reference or - the mddev->reconfig_sem is down or - we have a rcu_readlock handle_stripe was referencing rdev in three places without any of these. For the first two, get an rcu_readlock. For the last, the same access (md_sync_acct call) is made a little later after the rdev has been claimed under and rcu_readlock, if R5_Syncio is set. So just use that access... However R5_Syncio isn't really needed as the 'syncing' variable contains the same information. So use that instead. Issues, comment, and fix are identical in raid5 and raid6. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: handle errors when read-onlyNeilBrown2006-01-06
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: better handling for read error in raid1 during resyncNeilBrown2006-01-06
| | | | | | | | | | | | | | | | Handling of read errors during resync is separate from handling of read errors during normal IO in raid1. A previous patch added support for read errors during normal IO. This one adds support for read errors during resync or recovery. The key differences are that we don't need to freeze the array, because the normal handling of resync means that this part of the array will be idle except for resync, and the read/overwrite/re-read is needed in a separate piece of code. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: tidyup some issues with raid1 resync and prepare for catching ↵NeilBrown2006-01-06
| | | | | | | | | | read errors We are dereferencing ->rdev without an rcu lock! Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: attempt to auto-correct read errors in raid1NeilBrown2006-01-06
| | | | | | | | | | | | | | On a read-error we suspend the array, then synchronously read the block from other arrays until we find one where we can read it. Then we try writing the good data back everywhere and make sure it works. If any write or subsequent read fails, only then do we fail the device out of the array. To be able to suspend the array, we need to also keep track of how many requests are queued for handling by raid1d. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve handing of read errors with raid6NeilBrown2006-01-06
| | | | | | | | | | This is a simple port of match functionality across from raid5. If we get a read error, we don't kick the drive straight away, but try to over-write with good data first. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: fix raid6 resync check/repair codeNeilBrown2006-01-06
| | | | | | | | | | | | | | | | | | raid6 currently does not check the P/Q syndromes when doing a resync, it just calculates the correct value and writes it. Doing the check can reduce writes (often to 0) for a resync, and it is needed to properly implement the echo check > sync_action operation. This patch implements the appropriate checks and tidies up some related code. It also allows raid6 user-requested resync to bypass the intent bitmap. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: write intent bitmap support for raid10NeilBrown2006-01-06
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: move bitmap_create to after md array has been initialisedNeilBrown2006-01-06
| | | | | | | | | | | | | | | | | This is important because bitmap_create uses mddev->resync_max_sectors and that doesn't have a valid value until after the array has been initialised (with pers->run()). [It doesn't make a difference for current personalities that support bitmaps, but will make a difference for raid10] This has the added advantage of meaning with can move the thread->timeout manipulation inside the bitmap.c code instead of sprinkling identical code throughout all personalities. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow dirty raid[456] arrays to be started at bootNeilBrown2006-01-06
| | | | | | | | See patch to md.txt for more details Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: small cleanups for raid5NeilBrown2006-01-06
| | | | | | | | | | | | | | | | | Resync code: A test that isn't needed, a 'compute_block' that makes more sense elsewhere (And then doesn't need a test), a couple of BUG_ONs to confirm the change makes sense. Printks: A few were missing KERN_* Also fix a typo in a comment.. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid10 "IO Barrier" conceptNeilBrown2006-01-06
| | | | | | | | | | | | | raid10 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: improve raid1 "IO Barrier" conceptNeilBrown2006-01-06
| | | | | | | | | | | | | raid1 needs to put up a barrier to new requests while it does resync or other background recovery. The code for this is currently open-coded, slighty obscure by its use of two waitqueues, and not documented. This patch gathers all the related code into 4 functions, and includes a comment which (hopefully) explains what is happening. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] make dm-mirror not issue invalid resync requestsDarrick J. Wong2006-01-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've been attempting to set up a (Host)RAID mirror with dm_mirror on 2.6.14.3, and I've been having a strange little problem. The configuration in question is a set of 9GB SCSI disks that have 17942584 sectors. I set up the dm_mirror table as such: 0 17942528 mirror core 2 2048 nosync 2 8:48 0 8:64 0 If I'm not mistaken, this sets up a 9GB RAID1 mriror with 1MB stripes across both SCSI disks. The sector count of the dm device is less than the size of the disks, so we shouldn't fall off the end. However, I always get the messages like this in dmesg when I set up the dm table: attempt to access beyond end of device sdd: rw=0, want=17958656, limit=17942584 Clearly, something is trying to read sectors past the end of the drive. I traced it down to the __rh_recovery_prepare function in dm-raid1.c, which gets called when we're putting the mirror set together. This function calls the dirty region log's get_resync_work function to see if there's any resync that needs to be done, and queues up any areas that are out of sync. The log's get_resync_work function is actually a pointer to the core_get_resync_work function in dm-log.c. The core_get_resync_work function queries a bitset lc->sync_bits to find out if there are any regions that are out of date (i.e. the bit is 0), which is where the problem occurs. If every bit in lc->sync_bits is 1 (which is the case when we've just configured a new RAID1 with the nosync option), the find_next_zero_bit does NOT return the size parameter (lc->region_count in this case), it returns the size parameter rounded up to the nearest multiple of 32! I don't know if this is intentional, but i386 and x86_64 both exhibit this behavior. In any case, the statement "if (*region == lc->region_count)" looks like it's supposed to catch the case where are no regions to resync and return 0. Since find_next_zero_bit apparently has a habit of returning a value that's larger than lc->region_count, the enclosed patch changes the equality test to a greater-than test so that we don't try to resync areas outside of the RAID1 region. Seeing as the HostRAID metadata lives just past the end of the RAID1 data, mucking around in that area is not a good idea. I suppose another way to fix this would be to amend find_next_zero_bit so that it doesn't return values larger than "size", but I don't know if there's a reason for the current behavior. Signed-Off-By: Darrick J. Wong <djwong@us.ibm.com> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] dm-crypt: zero key before freeing itStefan Rompf2006-01-06
| | | | | | | | | | | Zap the memory before freeing it so we don't leave crypto information around in memory. Signed-off-by: Stefan Rompf <stefan@loplof.de> Acked-by: Clemens Fruhwirth <clemens@endorphin.org> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers/md/kcopyd.c: #if 0 kcopyd_cancel()Adrian Bunk2006-01-06
| | | | | | | | | This patch #if 0's the not yet implemented global function kcopyd_cancel(). Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper ioctl: add skip lock_fs flagAlasdair G Kergon2006-01-06
| | | | | | | | | | | | Add ioctl DM_SKIP_LOCKFS_FLAG for userspace to request that lock_fs is bypassed when suspending a device. There's no change to the behaviour of existing code that doesn't know about the new flag. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: make lock_fs optionalAlasdair G Kergon2006-01-06
| | | | | | | | | Devices only needs syncing when creating snapshots, so make this optional when suspending a device. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: rename frozen_bdevAlasdair G Kergon2006-01-06
| | | | | | | | | Rename frozen_bdev to suspended_bdev and move the bdget outside lockfs. (This prepares for making lockfs optional.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper raid1: add default mirrorJonathan E Brassow2006-01-06
| | | | | | | | | | | | This patch introduces a new field to the mirror_set (default_mirror) to store the default mirror. (A subsequent patch will allow us to change the default mirror in the event of a failure.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: scanf sector format changeAlasdair G Kergon2006-01-06
| | | | | | | | Use %llu not %Lu in sscanf/printf format strings. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: remove unused definitionAndrew Stribblehill2006-01-06
| | | | | | | | This patch removes an unused #define. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper snapshot: metadata reading separationAlasdair G Kergon2006-01-06
| | | | | | | | | More snapshot metadata reading into separate function, to prepare for changing the place it gets called from. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper ioctl: event on renamegoggin, edward2006-01-06
| | | | | | | | | After changing the name of a mapped device, trigger a dm event. (For userspace multipath tools.) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: add dm_get_mdDavid Teigland2006-01-06
| | | | | | | | Add dm_get_dev() to get a mapped device given its dev_t. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] device-mapper: add dm_find_mdDavid Teigland2006-01-06
| | | | | | | | Abstract dm_find_md() from dm_get_mdptr() to allow use elsewhere. Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix remaining list_for_each_safe_rcu in -mm (take 2)Paul E. McKenney2006-01-06
| | | | | | | | | | | | I missed a use of list_for_each_rcu_safe() in -mm tree. Here is an updated patch to fix it. This time tested on a machine that actually uses IPMI... (Thanks to Serge Hallyn for spotting this.) Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com> Cc: Corey Minyard <minyard@acm.org> Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] simplify PARPORT_PC_PCMCIA dependenciesAdrian Bunk2006-01-06
| | | | | | | | | Unless I miss something, this should be the simplest way to express the intended dependencies. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: export parport_get_port()Marko Kohtala2006-01-06
| | | | | | | | | Help external ppSCSI driver by exporting parport_get_port to match the parport_put_port. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: include fixesMarko Kohtala2006-01-06
| | | | | | | | Small cleanup of includes meant for older implementation. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: Kconfig dependency fixesMarko Kohtala2006-01-06
| | | | | | | | | Make drivers that use directly PC parport HW depend on PARPORT_PC rather than HW independent PARPORT. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: constificationMarko Kohtala2006-01-06
| | | | | | | | Trivial "const" additions to places in parport that truly are const. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: use complete slab bufferMarko Kohtala2006-01-06
| | | | | | | | Use the complete slab buffer that is allocated by kmalloc. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: parport_daisy_select return value fixMarko Kohtala2006-01-06
| | | | | | | | | parport_daisy_select returned wrong status that is read at wrong time during daisy command execution. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: daisy chain device id reading fixMarko Kohtala2006-01-06
| | | | | | | | | Device ID reading from daisy chain devices failed because the daisy device could not be opened. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: daisy chain end detection fixMarko Kohtala2006-01-06
| | | | | | | | | Daisy chain end detection failed at least with older daisy chain devices that do not implement the last device signal. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: phase fixesMarko Kohtala2006-01-06
| | | | | | | | | | Did not move the parport interface properly into IEEE1284_PH_REV_IDLE phase at end of data due to comparing bytes with nibbles. Internal phase IEEE1284_PH_HBUSY_DNA became unused, so remove it. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] parport: buffer overflow fixMarko Kohtala2006-01-06
| | | | | | | | | | | | | | Fix potential buffer overflow in case the device ID did not end in semicolon. Also might fail to negotiate back to IEEE1284_MODE_COMPAT in case of failure. parport_device_id did not return what Documentation/parport-lowlevel.txt said, so I changed it to match it. Determining device ID length is overly complicated, but Tim Waugh recalled on linux-parport seeing some buggy device that might need it. Signed-off-by: Marko Kohtala <marko.kohtala@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: Lindent runMarkus Lidel2006-01-06
| | | | | | Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: OptimizingMarkus Lidel2006-01-06
| | | | | | | | | | - make i2o_iop_free() static inline (from Adrian Bunk) - changed kmalloc() + memset(0) into kzalloc() Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: BeautifyingMarkus Lidel2006-01-06
| | | | | | | | Fix some typos and minor code beautifying. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: BugfixesMarkus Lidel2006-01-06
| | | | | | | | | | | | | | | - Removed some kmalloc's with __GFP_ZERO and replace it with memset() because it didn't work properly. - Fixed returned message frame in i2o_cfg_passthru() which caused raidutils to display wrong error message in case a disk was missing. - Fixed size of printk() in i2o_scsi.c. - Fixed get_device() and put_device() in probing of the I2O controller. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: Remove wrong I2O device classMarkus Lidel2006-01-06
| | | | | | | | Removed wrong I2O device class, which was only needed to add sysfs attributes. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: SPARC fixesMarkus Lidel2006-01-06
| | | | | | | | Fix lot of BE <-> LE bugs which prevent it from working on SPARC. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2O: changed I2O API to create I2O messages in kernel memoryMarkus Lidel2006-01-06
| | | | | | | | | | Changed the I2O API to create I2O messages first in kernel memory and then transfer it at once over the PCI bus instead of sending each quad-word over the PCI bus. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-28 01:58:24 -0500