aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* serial: MPSC: set baudrate when BRG divider is set.Mark A. Greer2008-02-05
| | | | | | | | | | | | | | The clock to generate the desired baudrate with the MPSC is first divided by the Baud Rate Generator (BRG) and then by the MPSC itself. So, when the BRG divider is changed, the MPSC divider must also be changed to generate the correct baudrate. During MPSC initialization, the BRG divider is changed but the MPSC divider isn't changed until much later. This results in some printk's coming out garbled. To fix that, set the MPSC divider at the same time that the BRG divider is changed. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: Coding styleAlan Cox2008-02-05
| | | | | | | | | Coding style tweaks and printk levels. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: speed setup failure reportingAlan Cox2008-02-05
| | | | | | | | | | Invalid speeds are forced to 9600. Update the code for this to encode new style baud rates properly. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: avoid stalling suspend if serial port won't drainRussell King2008-02-05
| | | | | | | | | | | | | | | | | | | | Some ports seem to be unable to drain their transmitters on shut down. Such a problem can occur if the port is programmed for hardware imposed flow control, characters are in the FIFO but the CTS signal is inactive. Normally, this isn't a problem because most places where we wait for the transmitter to drain have a time-out. However, there is no timeout in the suspend path. Give a port 30ms to drain; this is an arbitary value chosen to avoid long delays if there are many such ports in the system, while giving a reasonable chance for a single port to drain. Should a port not drain within this timeout, issue a warning. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: avoid waking up closed serial ports on resumeRussell King2008-02-05
| | | | | | | | | | | | | | | | | When we boot, serial ports remain in low power mode until they're used either by userspace or for the kernel console. However, if you suspend the system, and then resume, all serial ports will be taken out of low power mode. This is bad news for embedded devices where this can mean higher power consumption. Only bring a serial port out of low power mode if the port is being used as the kernel console, or is in use by userspace. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 8250.c: support specifying DW APB UARTs in device platform_dataWill Newton2008-02-05
| | | | | | | | | | | | | | Allow the private_data field to be specified in platform_data for the standard 8250/16550 UART. This field is used by DW APB type UARTs and without this patch it's only possible to set this field when registering the port by hand. If private_data is not set then the driver will potentially oops with a NULL pointer dereference. Signed-off-by: Will Newton <will.newton@gmail.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.hKrauth.Julien2008-02-05
| | | | | | | | | | | | | | | Add ADDI-DATA GmbH communication cards to 8250_pci driver. Supported cards are: APCI-7300, APCI-7420, APCI-7500, APCI-7800 APCI-7300-2, APCI-7420-2, APCI-7500-2 APCI-7300-3, APCI-7420-3, APCI-7500-3, APCI-7800-3 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Krauth J. <krauth.julien@addi-data.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/serial/s3c2410.c: remove dead config symbolsJiri Olsa2008-02-05
| | | | | | | | | | | Remove dead config symbol. Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ben Dooks <ben@fluff.org> Cc: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* serial: keep the DTR setting for serial console.Yinghai Lu2008-02-05
| | | | | | | | | | | | | | | | | | | with reverting "x86, serial: convert legacy COM ports to platform devices", we will have the serial console before the port is probled again. uart_add_one_port==>uart_configure_port==>set_mcttrl(port, 0) will clear the DTR setting by uart_set_options(). then I will lose my output from serial console again. So try to keep DTR in uart_configure_port() Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/pcmcia: add missing pci_dev_getJulia Lawall2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_get_slot does a pci_dev_get, so pci_dev_put needs to be called in an error case. An extract of the semantic match used to find the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type find1.T,T1,T2; identifier find1.E; statement find1.S; expression x1,x2,x3; expression find1.test; int ret != 0; @@ T E; ... ( * E = pci_get_slot(...); if (E == NULL) S | * if ((E = pci_get_slot(...)) == NULL) S ) ... when != pci_dev_put(...,(T1)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (test) { ... when != pci_dev_put(...,(T2)E,...) when != if (E != NULL) { ... pci_dev_put(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/pcmcia: Add missing iounmapJulia Lawall2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_iomap calls ioremap, and so should be matched with an iounmap. At the two error returns, the result of calling of_iomap is only stored in a local variable, so these error paths need to call iounmap. Furthermore, this function ultimately stores the result of of_iomap in an array that is local to the file. These values should be iounmapped at some point. I have added a corresponding call to iounmap at the end of the function m8xx_remove. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = of_iomap(...); if (E == NULL) S ... when != iounmap(...,(T1)E,...) when != if (E != NULL) { ... iounmap(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != iounmap(...,(T2)E,...) when != if (E != NULL) { ... iounmap(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Vitaly Bordug <vitb@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* at91_cf: use generic gpio callsDavid Brownell2008-02-05
| | | | | | | | | | | | | Update the AT91 CF driver to use the generic GPIO calls instead of the AT91-specific ones; and request exclusive use of those signals. Minor tweaks to cleanup code paths: always in reverse order of how the resources were allocated, with remove() matching the fault paths of probe(). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia/pcnet_cs: fix 'shadow variable' warningRichard Knutsson2008-02-05
| | | | | | | | | | | | Fixing: CHECK drivers/net/pcmcia/pcnet_cs.c drivers/net/pcmcia/pcnet_cs.c:523:15: warning: symbol 'hw_info' shadows an earlier one drivers/net/pcmcia/pcnet_cs.c:148:18: originally declared here Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia/fmvj18x_cs: fix 'shadow variable' warningRichard Knutsson2008-02-05
| | | | | | | | | | | | Fixing: CHECK drivers/net/pcmcia/fmvj18x_cs.c drivers/net/pcmcia/fmvj18x_cs.c:1205:6: warning: symbol 'i' shadows an earlier one drivers/net/pcmcia/fmvj18x_cs.c:1179:9: originally declared here Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia/axnet_cs: make use of 'max()' instead of handcrafted oneRichard Knutsson2008-02-05
| | | | | | | | | Use 'max(x,y)' instead of 'x < y ? y : x'. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia/axnet_cs: make functions staticRichard Knutsson2008-02-05
| | | | | | | | | | | | Fixing: CHECK drivers/net/pcmcia/axnet_cs.c drivers/net/pcmcia/axnet_cs.c:994:5: warning: symbol 'ax_close' was not declared. Should it be static? drivers/net/pcmcia/axnet_cs.c:1017:6: warning: symbol 'ei_tx_timeout' was not declared. Should it be static? Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia/3c574_cs: fix 'shadow variable' warningRichard Knutsson2008-02-05
| | | | | | | | | | | | Fixing: CHECK drivers/net/pcmcia/3c574_cs.c drivers/net/pcmcia/3c574_cs.c:695:7: warning: symbol 'i' shadows an earlier one drivers/net/pcmcia/3c574_cs.c:636:6: originally declared here Signed-off-by: Richard Knutson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia: include bad CIS filename in error messageRandy Dunlap2008-02-05
| | | | | | | | | - Print the invalid CIS filename in the invalid filename message. - Use sizeof() instead of hard-coded constant for buffer size. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia: stop updating dev->power.power_stateDavid Brownell2008-02-05
| | | | | | | | | | | This stops the pcmcia core from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia: replace kio_addr_t with unsigned int everywhereOlof Johansson2008-02-05
| | | | | | | | | | | | | | | Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pcmcia: convert some internal-only ioaddr_t to unsigned intOlof Johansson2008-02-05
| | | | | | | | | | | | | | | | | | | | | | | | Convert the io_req_t members to unsigned int, to allow use on machines with more than 16 bits worth of IO ports (i.e. secondary busses on ppc64, etc). There was only a couple of places in drivers where a change was needed. I left printk formats alone (there are lots of %04x-style formats in there), mostly to not change the format on the platforms that only have 16-bit io addresses, but also because the padding doesn't really add all that much value most of the time. I found only one sprintf of an address, and upsized the string accordingly (I doubt anyone will have anywhere near INT_MAX as irq value, but at least there's room for it now). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/net/wireless/b43/main.c needs io.hAndrew Morton2008-02-05
| | | | | | | | | | m68k: drivers/net/wireless/b43/main.c:251: error: implicit declaration of function 'mmiowb' Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2008-02-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits) [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring ...
| *-. Merge branches 'at91', 'ixp', 'master', 'misc', 'pxa' and 'realview' into develRussell King2008-02-04
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * at91: [ARM] 4802/1: Fix typo and remove vague comment [ARM] 4660/3: at91: allow selecting UART for early kernel messages [ARM] 4739/1: at91sam9263: make gpio bank C and D irqs work * ixp: [ARM] 4809/2: ixp4xx: Merge dsmg600-power.c into dsmg600-setup.c [ARM] 4808/2: ixp4xx: Merge nas100d-power.c into nas100d-setup.c [ARM] 4807/2: ixp4xx: Merge nslu2-power.c into nslu2-setup.c [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver [ARM] 4715/2: Ethernet support for IXDP425 boards [ARM] 4714/2: Headers for IXP4xx built-in Ethernet and WAN drivers [ARM] 4713/3: Adds drivers for IXP4xx QMgr and NPE features [ARM] 4712/2: Adds functions to read and write IXP4xx "feature" bits [ARM] 4774/2: ixp4xx: Register dsmg600 rtc i2c_board_info [ARM] 4773/2: ixp4xx: Register nas100d rtc i2c_board_info [ARM] 4772/2: ixp4xx: Register nslu2 rtc i2c_board_info [ARM] 4769/2: ixp4xx: Button updates for the dsmg600 board [ARM] 4768/2: ixp4xx: Button and LED updates for the nas100d board [ARM] 4767/2: ixp4xx: Add bitops.h include to io.h [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards * master: [ARM] 4810/1: - Fix 'section mismatch' building warnings [ARM] xtime_seqlock: fix more ARM machines for xtime deadlocking [ARM] 21285 serial: fix build error * misc: [ARM] 4736/1: Export atags to userspace and allow kexec to use customised atags * pxa: [ARM] 4798/1: pcm027: fix missing header file [ARM] 4803/1: pxa: fix building issue of poodle.c caused by patch 4737/1 [ARM] 4801/1: pxa: fix building issues of missing pxa2xx-regs.h [ARM] pxa: introduce sysdev for pxa3xx static memory controller [ARM] pxa: add preliminary suspend/resume code for pxa3xx [ARM] pxa: introduce sysdev for GPIO register saving/restoring [ARM] pxa: introduce sysdev for IRQ register saving/restoring [ARM] pxa: fix the warning of undeclared "struct pxaohci_platform_data" [ARM] pxa: change set_kset_name() to direct name assignment for MFP sysclass * realview: [ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option [ARM] 4821/1: RealView: Remove the platform dependencies from localtimer.c [ARM] 4820/1: RealView: Select the timer IRQ at run-time [ARM] 4819/1: RealView: Fix entry-macro.S to work with multiple platforms [ARM] 4818/1: RealView: Add core-tile detection [ARM] 4817/1: RealView: Move the AMBA resource definitions to realview_eb.c [ARM] 4816/1: RealView: Move the platform-specific definitions into board-eb.h [ARM] 4815/1: RealView: Add clockevents suport for the local timers [ARM] 4814/1: RealView: Add broadcasting clockevents support for ARM11MPCore [ARM] 4813/1: Add SMP helper functions for clockevents support [ARM] 4812/1: RealView: clockevents support for the RealView platforms [ARM] 4811/1: RealView: clocksource support for the RealView platforms
| | | * [ARM] 4810/1: - Fix 'section mismatch' building warningsKristoffer Ericson2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warning message : WARNING: vmlinux.o(.text+0x9afc): Section mismatch: reference to .init.text:sa1110_mb_enable (between 'sa1111_probe' and 'sa1111_remove') WARNING: vmlinux.o(.text+0x13b1ac): Section mismatch: reference to .init.text:pcmcia_jornada720_init (between 'pcmcia_probe' and 'pcmcia_remove') * fixes the 'section mismatch' building warnings for target sa1100. Solution is __init -> __devinit. Thanks to Randy Dunlap for pointing out the solution. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | | * [ARM] 21285 serial: fix build errorRussell King2008-02-04
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | drivers/serial/21285.c: In function 'serial21285_set_termios': drivers/serial/21285.c:280: error: 'tty' undeclared (first use in this function) drivers/serial/21285.c:280: error: (Each undeclared identifier is reported only once drivers/serial/21285.c:280: error: for each function it appears in.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * / [ARM] 4660/3: at91: allow selecting UART for early kernel messagesGuennadi Liakhovetski2008-02-04
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Currently early kernel messages, i.e., those from uncompression, go to the debugging UART. And if it is enabled in the platform configuration, but not initialized by the bootloader, the machine hangs, waiting for UART status change. Besides, having those messages on another UART - typically the console UART - may be preferrable. This patch allows selecting the UART in kernel configuration. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds2008-02-04
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits) virtio: balloon driver virtio: Use PCI revision field to indicate virtio PCI ABI version virtio: PCI device virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz virtio_blk: Dont waste major numbers virtio_blk: provide getgeo virtio_net: parametrize the napi_weight for virtio receive queue. virtio: free transmit skbs when notified, not on next xmit. virtio: flush buffers on open virtnet: remove double ether_setup virtio: Allow virtio to be modular and used by modules virtio: Use the sg_phys convenience function. virtio: Put the virtio under the virtualization menu virtio: handle interrupts after callbacks turned off virtio: reset function virtio: populate network rings in the probe routine, not open virtio: Tweak virtio_net defines virtio: Net header needs hdr_len virtio: remove unused id field from struct virtio_blk_outhdr virtio: clarify NO_NOTIFY flag usage ...
| * | virtio: balloon driverRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After discussions with Anthony Liguori, it seems that the virtio balloon can be made even simpler. Here's my attempt. The device configuration tells the driver how much memory it should take from the guest (ie. balloon size). The guest feeds the page numbers it has taken via one virtqueue. A second virtqueue feeds the page numbers the driver wants back: if the device has the VIRTIO_BALLOON_F_MUST_TELL_HOST bit, then this queue is compulsory, otherwise it's advisory (and the guest can simply fault the pages back in). This driver can be enhanced later to deflate the balloon via a shrinker, oom callback or we could even go for a complete set of in-guest regulators. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Use PCI revision field to indicate virtio PCI ABI versionAnthony Liguori2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As Avi pointed out, as we continue to massage the virtio PCI ABI, we can make things a little more friendly to users by utilizing the PCI revision field to indicate which version of the ABI we're using. This is a hard ABI version and incrementing it will cause the guest driver to break. This is the necessary changes to virtio_pci to support this. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: PCI deviceAnthony Liguori2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | This is a PCI device that implements a transport for virtio. It allows virtio devices to be used by QEMU based VMMs like KVM or Xen. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzzChristian Borntraeger2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Am Freitag, 1. Februar 2008 schrieb Christian Borntraeger: > Right. I will fix that with an additional patch. This patch goes on top of the minor number patch. Please let me know if you want a merged patch: Currently virtio_blk creates the disk name combinging "vd" with 'a'++. This will give strange names after vdz. I have implemented names up to vdzzz - inspired by the sd.c code. That should be sufficient for now. There is one driver in the kernel (driver/s390/block/dasd_genhd.c) that implements names from dasda-dasdzzzz allowing even more disks. Maybe a janitor can come up with a common implementation usable for all kind of block device drivers. I have tested this patch with 100 disks - seems to work. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio_blk: Dont waste major numbersChristian Borntraeger2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rusty, currently virtio_blk uses one major number per device. While this works quite well on most systems it is wasteful and will exhaust major numbers on larger installations. This patch allocates a major number on init and will use 16 minor numbers for each disk. That will allow ~64k virtio_blk disks. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio_blk: provide getgeoChristian Borntraeger2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rusty, I currently try to make my guest boot from an virtio root device without having an external kernel. Some of the tools that I tried expect HDIO_GETGEO to work. The most interesting value is likely the geo.start value to get the offset of a partition. This value is filled by block/ioctl.c if fops->getgeo is set. This patch also fills in some standard values for heads, sectors and cylinders. Makes sense? Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio_net: parametrize the napi_weight for virtio receive queue.Dor Laor2008-02-04
| | | | | | | | | | | | | | | | | | | | | It is done in order to improve performance. Signed-off-by: Dor Laor <dor.laor@qumranet.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: free transmit skbs when notified, not on next xmit.Rusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | This fixes a potential dangling xmit problem. We also suppress refill interrupts until we need them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: flush buffers on openRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix bug found by Christian Borntraeger: if the other side fills all the registered network buffers before we enable NAPI, we will never get an interrupt. The simplest fix is to process the input queue once on open. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtnet: remove double ether_setupChristian Borntraeger2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hello Rusty, virtnet_probe already calls alloc_etherdev, which calls ether_setup. There is no need to do that again. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Allow virtio to be modular and used by modulesRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | This is needed for the virtio PCI device to be compiled as a module. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Use the sg_phys convenience function.Rusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | Simple cleanup. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Put the virtio under the virtualization menuAnthony Liguori2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | This patch moves virtio under the virtualization menu and changes virtio devices to not claim to only be for lguest. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: handle interrupts after callbacks turned offRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Anthony Liguori found double interrupt suppression in the virtio_net driver, triggered by two skb_recv_done's in a row. This is because virtio_ring's interrupt suppression is a best-effort optimization: it contains no synchronization so the host can miss it and still send interrupts. But it's certainly nicer for virtio users if calling disable_cb actually disables callbacks, so we check for the race in the interrupt routine. Note: SMP guests might require syncronization here, but since disable_cb is actually called from interrupt context, there has to be some form of synchronization before the next same interrupt handler is called (Linux guarantees that the same device's irq handler will never run simultanously on multiple CPUs). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: reset functionRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A reset function solves three problems: 1) It allows us to renegotiate features, eg. if we want to upgrade a guest driver without rebooting the guest. 2) It gives us a clean way of shutting down virtqueues: after a reset, we know that the buffers won't be used by the host, and 3) It helps the guest recover from messed-up drivers. So we remove the ->shutdown hook, and the only way we now remove feature bits is via reset. We leave it to the driver to do the reset before it deletes queues: the balloon driver, for example, needs to chat to the host in its remove function. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: populate network rings in the probe routine, not openRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | Since we want to reset the device to remove them, this is simpler (device is reset for us on driver remove). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Tweak virtio_net definesRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) Turn GSO on virtio net into an all-or-nothing (keep checksumming separate). Having multiple bits is a pain: if you can't support something you should handle it in software, which is still a performance win. 2) Make VIRTIO_NET_HDR_GSO_ECN a flag in the header, so it can apply to IPv6 or v4. 3) Rename VIRTIO_NET_F_NO_CSUM to VIRTIO_NET_F_CSUM (ie. means we do checksumming). 4) Add csum and gso params to virtio_net to allow more testing. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Net header needs hdr_lenRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | It's far easier to deal with packets if we don't have to parse the packet to figure out the header length to know how much to pull into the skb data. Add the field to the virtio_net_hdr struct (and fix the spaces that somehow crept in there). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: clarify NO_NOTIFY flag usageRusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | The other side (host) can set the NO_NOTIFY flag as an optimization, to say "no need to kick me when you add things". Make it clear that this is advisory only; especially that we should always notify when the ring is full. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: explicit enable_cb/disable_cb rather than callback return.Rusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that virtio_net wants to disable callbacks (interrupts) before calling netif_rx_schedule(), so we can't use the return value to do so. Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback now returns void, rather than a boolean. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: simplify config mechanism.Rusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we used a type/len pair within the config space, but this seems overkill. We now simply define a structure which represents the layout in the config space: the config space can now only be extended at the end. The main driver-visible changes: 1) We indicate what fields are present with an explicit feature bit. 2) Virtqueues are explicitly numbered, and not in the config space. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Implement skb_partial_csum_set, for setting partial csums on ↵Rusty Russell2008-02-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | untrusted packets. Use it in virtio_net (replacing buggy version there), it's also going to be used by TAP for partial csum support. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 12:06:14 -0500