aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* USB: drivers: use USB API functions rather than constantsJulia Lawall2009-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Remove redundant test in pxa27x_udc and ftdi_sioJulia Lawall2009-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ub: use USB API functions rather than constantsJulia Lawall2009-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa27x_udc: add vbus_draw callbackRobert Jarzmik2009-03-24
| | | | | | | | | | | | | | | Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa27x_udc: add otg transceiver supportRobert Jarzmik2009-03-24
| | | | | | | | | | | | | | | | When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa27x_udc: add vbus session handlingRobert Jarzmik2009-03-24
| | | | | | | | | | | | | | | | On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: pxa27x_udc: factor pullup code to prepare otg transceiverRobert Jarzmik2009-03-24
| | | | | | | | | | | | | Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gpio_vbus: add delayed vbus_session callsRobert Jarzmik2009-03-24
| | | | | | | | | | | | | Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usblp: continuously poll for statusPete Zaitcev2009-03-24
| | | | | | | | | | | | | | | | The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-storage: increase max_sectors for tape drivesAlan Stern2009-03-24
| | | | | | | | | | | | | | | | This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Phil Mitchell <philipm@sybase.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: gadget: fix rndis regressionDavid Brownell2009-03-24
| | | | | | | | | | | | | | | | | | | | Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer <aric at sdgsystems.com>) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add quirk to avoid config and interface stringsAlan Stern2009-03-24
| | | | | | | | | | | | | | | | | | | Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by: Melchior FRANZ <melchior.franz@gmail.com> Tested-by: Melchior FRANZ <melchior.franz@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.28 and 2.6.29, nothing earlier] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-03-23
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits) ucc_geth: Fix oops when using fixed-link support dm9000: locking bugfix net: update dnet.c for bus_id removal dnet: DNET should depend on HAS_IOMEM dca: add missing copyright/license headers nl80211: Check that function pointer != NULL before using it sungem: missing net_device_ops be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycle be2net: replenish when posting to rx-queue is starved in out of mem conditions bas_gigaset: correctly allocate USB interrupt transfer buffer smsc911x: reset last known duplex and carrier on open sh_eth: Fix mistake of the address of SH7763 sh_eth: Change handling of IRQ netns: oops in ip[6]_frag_reasm incrementing stats net: kfree(napi->skb) => kfree_skb net: fix sctp breakage ipv6: fix display of local and remote sit endpoints net: Document /proc/sys/net/core/netdev_budget tulip: fix crash on iface up with shirq debug virtio_net: Make virtio_net support carrier detection ...
| * ucc_geth: Fix oops when using fixed-link supportAnton Vorontsov2009-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b1c4a9dddf09fe99b8f88252718ac5b357363dc4 ("ucc_geth: Change uec phy id to the same format as gianfar's") introduced a regression in the ucc_geth driver that causes this oops when fixed-link is used: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0151270 Oops: Kernel access of bad area, sig: 11 [#1] TMCUTU NIP: c0151270 LR: c0151270 CTR: c0017760 REGS: cf81fa60 TRAP: 0300 Not tainted (2.6.29-rc8) MSR: 00009032 <EE,ME,IR,DR> CR: 24024042 XER: 20000000 DAR: 00000000, DSISR: 20000000 TASK = cf81cba0[1] 'swapper' THREAD: cf81e000 GPR00: c0151270 cf81fb10 cf81cba0 00000000 c0272e20 c025f354 00001e80 cf86b08c GPR08: d1068200 cffffb74 06000000 d106c200 42024042 10085148 0fffd000 0ffc81a0 GPR16: 00000001 00000001 00000000 007ffeb0 00000000 0000c000 cf83f36c cf83f000 GPR24: 00000030 cf83f360 cf81fb20 00000000 d106c200 20000000 00001e80 cf83f360 NIP [c0151270] ucc_geth_open+0x330/0x1efc LR [c0151270] ucc_geth_open+0x330/0x1efc Call Trace: [cf81fb10] [c0151270] ucc_geth_open+0x330/0x1efc (unreliable) [cf81fba0] [c0187638] dev_open+0xbc/0x12c [cf81fbc0] [c0187e38] dev_change_flags+0x8c/0x1b0 This patch fixes the issue by removing offending (and somewhat duplicate) code from init_phy() routine, and changes _probe() function to use uec_mdio_bus_name(). Also, since we fully construct phy_bus_id in the _probe() routine, we no longer need ->phy_address and ->mdio_bus fields in ucc_geth_info structure. I wish the patch would be a bit shorter, but it seems like the only way to fix the issue in a sane way. Luckily, the patch has been tested with real PHYs and fixed-link, so no further regressions expected. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Tested-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dm9000: locking bugfixDavid Brownell2009-03-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a locking bug in the dm9000 driver. It calls request_irq() without setting IRQF_DISABLED ... which is correct for handlers that support IRQ sharing, since that behavior is not guaranteed for shared IRQs. However, its IRQ handler then wrongly assumes that IRQs are blocked. So the fix just uses the right spinlock primitives in the IRQ handler. NOTE: this is a classic example of the type of bug which lockdep currently masks by forcibly setting IRQF_DISABLED on IRQ handlers that did not request that flag. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: update dnet.c for bus_id removalStephen Rothwell2009-03-23
| | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dnet: DNET should depend on HAS_IOMEMIlya Yanok2009-03-21
| | | | | | | | | | Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dca: add missing copyright/license headersMaciej Sosnowski2009-03-21
| | | | | | | | | | | | | | | | In two dca files copyright and license headers are missing. This patch adds them there. Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sungem: missing net_device_opsStephen Hemminger2009-03-20
| | | | | | | | | | | | | | | | Sungem driver only got partially converted to net_device_ops. Since this could cause bugs, please push this to 2.6.29 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: fix to restore vlan ids into BE2 during a IF DOWN->UP cycleSathya Perla2009-03-20
| | | | | | | | | | | | | | This is a patch to reconfigure vlan-ids during an i/f down/up cycle Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * be2net: replenish when posting to rx-queue is starved in out of mem conditionsSathya Perla2009-03-20
| | | | | | | | | | | | | | | | This is a patch to replenish the rx-queue when it is in a starved state (due to out-of-mem conditions) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bas_gigaset: correctly allocate USB interrupt transfer bufferTilman Schmidt2009-03-19
| | | | | | | | | | | | | | | | | | | | Every USB transfer buffer has to be allocated individually by kmalloc. Impact: bugfix, no functional change Signed-off-by: Tilman Schmidt <tilman@imap.cc> Tested-by: Kolja Waschk <kawk@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * smsc911x: reset last known duplex and carrier on openSteve Glendinning2009-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smsc911x_phy_adjust_link is called periodically by the phy layer (as it's run in polling mode), and it only updates the hardware when it sees a change in duplex or carrier. This patch clears the last known values every time the interface is brought up, instead of only when the module is loaded. Without this patch the adjust_link function never updates the hardware after an ifconfig down; ifconfig up. On a full duplex link this causes the tx error counter to increment, even though packets are correctly transmitted, as the default MAC_CR register setting is for half duplex. The tx errors are "no carrier" errors, which should be ignored in full-duplex mode. When MAC_CR is set to "full duplex" mode they are correctly ignored by the hardware. Note that even with this patch the tx error counter can increment if packets are transmitted between "ifconfig up" and the first phy poll interval. An improved solution would use the phy interrupt with phylib, but I haven't managed to make this work 100% robustly yet. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: Fix mistake of the address of SH7763Nobuhiro Iwamatsu2009-03-19
| | | | | | | | | | | | | | | | Address of SH_TSU_ADDR and ARSTR of SH7763 was wrong. This revise it. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sh_eth: Change handling of IRQNobuhiro Iwamatsu2009-03-19
| | | | | | | | | | | | | | | | | | Handling of IRQ of the SH7763/SH7764 CPU which sh_eth supported was changed. This revises it for this change. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * tulip: fix crash on iface up with shirq debugKyle McMartin2009-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tulip is currently doing request_irq before it has done its initialization. This is usually not a problem because it hasn't enable interrupts yet, but with DEBUG_SHIRQ on, we call the irq handler when registering the interrupt as a sanity check. This can result in a NULL ptr dereference, so call tulip_init_ring before request_irq, and add a free_ring function to do the freeing now shared with tulip_close. Tested with a shell loop running ifup, ifdown in a loop a few hundred times with DEBUG_SHIRQ on. Signed-off-by: Kyle McMartin <kyle@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * virtio_net: Make virtio_net support carrier detectionPantelis Koukousoulas2009-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: Make NetworkManager work with virtio_net For now the semantics are simple: There is always carrier. This allows a seamless experience with e.g., qemu/kvm where NetworkManager just configures and sets up everything automagically. If/when a generally agreed-upon way to control carrier on/off in the emulator/hypervisor level emerges, it will be trivial to extend the driver to support that too, but for now even this 2-liner makes user experience that much better. Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Fix updating of speed/duplex changesJay Vosburgh2009-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch corrects an omission from the following commit: commit f0c76d61779b153dbfb955db3f144c62d02173c2 Author: Jay Vosburgh <fubar@us.ibm.com> Date: Wed Jul 2 18:21:58 2008 -0700 bonding: refactor mii monitor The un-refactored code checked the link speed and duplex of every slave on every pass; the refactored code did not do so. The 802.3ad and balance-alb/tlb modes utilize the speed and duplex information, and require it to be kept up to date. This patch adds a notifier check to perform the appropriate updating when the slave device speed changes. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2: Fix problem of using wrong IRQ handler.Michael Chan2009-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MSI-X handler was chosen before the call to pci_enable_msix(). If MSI-X was not available, the wrong MSI-X handler would be used in INTA mode. This would cause a screaming interrupt problem because INTA would not be cleared by the MSI-X handler. Fixed by assigning MSI-X handler after pci_enable_msix() returns successfully. Also update version to 1.9.3. Thomas Chenault <thomas_chenault@dell.com> helped us find this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * zd1211rw: Do not panic on device eject when associatedJouni Malinen2009-03-16
| | | | | | | | | | | | | | | | | | | | | | zd_op_tx() must not return an arbitrary error value since that can leave mac80211 trying to retransmit the frame and with the extra data pushed into the beginning of the skb on every attempt, this will end up causing a kernel panic (skb_under_panic from skb_push call). This can happen, e.g., when ejecting the device when associated. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: AR9280 PCI devices must serialize IO as wellLuis R. Rodriguez2009-03-16
| | | | | | | | | | | | Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: implement IO serializationLuis R. Rodriguez2009-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All 802.11n PCI devices (Cardbus, PCI, mini-PCI) require serialization of IO when on non-uniprocessor systems. PCI express devices not not require this. This should fix our only last standing open ath9k kernel.org bugzilla bug report: http://bugzilla.kernel.org/show_bug.cgi?id=12110 A port is probably required to older kernels and I can work on that. Cc: stable@kernel.org Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2009-03-23
|\ \ | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix crash with /proc/iomem sparc64: Reschedule KGDB capture to a software interrupt. sbus: Auto-load openprom module when device opened.
| * \ Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-03-19
| |\ \
| * | | sbus: Auto-load openprom module when device opened.Scott James Remnant2009-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The openprom module is missing the char-major-10-139 alias that would cause it to be auto-loaded when a device of that type is opened. This patch adds the alias. Signed-off-by: Scott James Remnant <scott@canonical.com> Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | radeonfb: Whack the PCI PM register until it sticksBenjamin Herrenschmidt2009-03-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression introduced when we switched to using the core pci_set_power_state(). The chip seems to need the state to be written over and over again until it sticks, so we do that. Note that the code is a bit blunt, without timeout, etc... but that's pretty much because I put back in there the code exactly as it used to be before the regression. I still add a call to pci_set_power_state() at the end so that ACPI gets called appropriately on x86. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Raymond Wooninck <tittiatcoke@gmail.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-03-19
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix waitqueue usage in hiddev HID: fix incorrect free in hiddev
| * | | HID: fix waitqueue usage in hiddevJohannes Weiner2009-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DECLARE_WAITQUEUE doesn't initialize the wait descriptor's task_list to 'empty' but to zero. prepare_to_wait() will not enqueue the descriptor to the waitqueue and finish_wait() will do list_del_init() on a list head that contains NULL pointers, which oopses. This was introduced by 079034073 "HID: hiddev cleanup -- handle all error conditions properly". The prior code used an unconditional add_to_waitqueue() which didn't care about the wait descriptor's list head and enqueued the thing unconditionally. The new code uses prepare_to_wait() which DOES check the prior list state, so use DEFINE_WAIT instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Oliver Neukum <oliver@neukum.name> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | | HID: fix incorrect free in hiddevJohannes Weiner2009-03-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If hiddev_open() fails, it wrongly frees the shared hiddev structure kept in hiddev_table instead of the hiddev_list structure allocated for the opened file descriptor. Existing references to this structure will then accessed free memory. This was introduced by 079034073 "HID: hiddev cleanup -- handle all error conditions properly". Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Oliver Neukum <oliver@neukum.name> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds2009-03-18
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: benet: remove driver now that it is merged in drivers/net/
| * | | | Staging: benet: remove driver now that it is merged in drivers/net/Greg Kroah-Hartman2009-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The benet driver is now in the proper place in drivers/net/benet, so we can remove the staging version. Acked-by: Sathya Perla <sathyap@serverengines.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | Merge branch 'merge' of ↵Linus Torvalds2009-03-18
|\ \ \ \ \ | |/ / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ps3: ps3_defconfig updates powerpc/mm: Respect _PAGE_COHERENT on classic ppc32 SW powerpc/5200: Enable CPU_FTR_NEED_COHERENT for MPC52xx ps3/block: Replace mtd/ps3vram by block/ps3vram
| * | | | Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt2009-03-17
| |\ \ \ \
| * | | | | ps3/block: Replace mtd/ps3vram by block/ps3vramGeert Uytterhoeven2009-03-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the PS3 Video RAM Storage Driver from an MTD driver to a plain block device driver. The ps3vram driver exposes unused video RAM on the PS3 as a block device suitable for storage or swap. Fast data transfer is achieved using a local cache in system RAM and DMA transfers via the GPU. The new driver is ca. 50% faster for reading, and ca. 10% for writing. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | | | | USB: storage: Unusual USB device Prolific 2507 variation addedThomas Bartosik2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik <tbartdev@gmx-topmail.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | | USB: Add device id for Option GTM380 to option driverAchilleas Kotsis2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | | USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | | USB: Updated unusual-devs entry for USB mass storage on Nokia 6233Moritz Muehlenhoff2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff <jmm@debian.org> Tested-by: Jan Heitkoetter <devnull@heitkoetter.net> Cc: stable <stable@kernel.org> Signed-off-by: Phil Dibowitz <phil@ipom.com>
* | | | | | USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | | USB: EHCI: expedite unlinks when the root hub is suspendedAlan Stern2009-03-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Brandon Philips <brandon@ifup.org> Tested-by: Brandon Philips <brandon@ifup.org> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-01 19:40:23 -0500