aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* ACPI: /proc/acpi/thermal_zone trip points are now read-only, mark them as suchPavel Machek2007-08-24
| | | | | Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZXLen Brown2007-08-20
| | | | | | | | | This system BIOS sets a critical temperature to 65C, which is too low. https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=155496 Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: thermal: create "thermal.crt=C" bootparamLen Brown2007-08-14
| | | | | | | | | | | | | | | | | | Some hardware will malfunction at a temperature below the BIOS provided critical shutdown threshold. This hook allows moving the critical trip points down to a temperature which provokes a graceful shutdown before the hardware malfunction. http://bugzilla.kernel.org/show_bug.cgi?id=8884 WARNING: A trip-point override will not get noticed until the system delivers a temperature change event, or unless thermal zone polling is enabled. eg. "thermal.tzp=10" Signed-off-by: Len Brown <len.brown@intel.com>
* ACPI: thermal: clean up MODULE_PARM_DESC newlinesLen Brown2007-08-14
| | | | | Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Pull sbs into release branchLen Brown2007-08-12
|\
| * ACPI: sbs: remove dead codeAdrian Bunk2007-08-03
| | | | | | | | | | | | | | | | | | Remove dead code spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | Pull processor into release branchLen Brown2007-08-12
|\ \
| * | acpi-cpufreq: Fix some x86/x86-64 acpi-cpufreq driver issuesFenghua Yu2007-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses some issues in x86/x86-64 acpi-cpufreq driver: 1. Current memory allocation for acpi_perf_data is actually open-coded alloc_percpu(). The patch defines and handles acpi_perf_data as percpu data. The code will be cleaner and easier to be maintained with this change. 2. Won't load driver in acpi_cpufreq_early_init() failure case. 3. Add __init for acpi_cpufreq_early_init(). Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | ACPI: fix "Time Problems with 2.6.23-rc1-gf695baf2"Venki Pallipadi2007-08-07
| | | | | | | | | | | | | | | | | | | | | Enable C3 without bm control only for CST based C3. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | Pull fluff into release branchLen Brown2007-08-12
|\ \ \
| * | | ACPI: staticAdrian Bunk2007-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the needlessly global "acpi_event_seqnum" static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Pull ec into release branchLen Brown2007-08-12
|\ \ \ \
| * | | | ACPI EC: remove potential deadlock from ECAlexey Starikovskiy2007-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: fix run-together printk linesMeelis Roos2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: acpi_ec_remove(): fix use-after-freeAdrian Bunk2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an obvious use-after-free introduced by commit 837012ede14a8fc088be3682c964da7fc6af026b. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: Switch from boot_ec as soon as we find its desc in DSDT.Alexey Starikovskiy2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ASUS laptops fail to use boot time EC and need to eventually switch to one described in DSDT. http://bugzilla.kernel.org/show_bug.cgi?id=8709 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: fix build warningLen Brown2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/acpi/ec.c:657: warning: ‘acpi_ec_register_query_methods’ defined but not used Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: If ECDT is not found, look up EC in DSDT.Alexey Starikovskiy2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some ASUS laptops access EC space from device _INI methods, but do not provide ECDT for early EC setup. In order to make them function properly, there is a need to find EC is DSDT before any _INI is called. Similar functionality was turned on by acpi_fake_ecdt=1 command line before. Now it is on all the time. http://bugzilla.kernel.org/show_bug.cgi?id=8598 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: EC: Remove noisy debug printk fron EC driver.Alexey Starikovskiy2007-08-03
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | ACPI: EC: Handler for query 0x57 is not found! Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Pull dock-bay into release branchLen Brown2007-08-12
|\ \ \ \
| * | | | ACPI: dock: Send key=value pair instead of plain valueHolger Macht2007-08-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Send key=value pair along with the uevent instead of a plain value so that userspace (udev) can handle it like common environment variables. Signed-off-by: Holger Macht <hmacht@suse.de> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: bay: send envp with uevent - fixStephan Berberig2007-08-11
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There must not be a new-line character in the uevent. Otherwise, udev gets confused. Thanks to Kay Sievers for pointing it out. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Pull bugzilla-8842 into release branchLen Brown2007-08-12
|\ \ \ \
| * | | | ACPI: thermal: add DMI hooks to handle AOpen's broken Award BIOSLen Brown2007-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use DMI to: 1. enable polling (BIOS thermal events are broken) 2. disable active trip points (BIOS fan control is broken) 3. disable passive trip point (BIOS hard-codes it too low) The actual temperature reading does work, and with the aid of polling, the critical trip point should work too. http://bugzilla.kernel.org/show_bug.cgi?id=8842 Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: thermal: create "thermal.act=" to disable or override active trip pointLen Brown2007-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thermal.act=-1 disables all active trip points in all ACPI thermal zones. thermal.act=C, where C > 0, overrides all lowest temperature active trip points in all thermal zones to C degrees Celsius. Raising this trip-point may allow you to keep your system silent up to a higher temperature. However, it will not allow you to raise the lowest temperature trip point above the next higher trip point (if there is one). Lowering this trip point may kick in the fan sooner. Note that overriding this trip-point will disable any BIOS attempts to implement hysteresis around the lowest temperature trip point. This may result in the fan starting and stopping frequently if temperature frequently crosses C. WARNING: raising trip points above the manufacturer's defaults may cause the system to run at higher temperature and shorten its life. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: thermal: create "thermal.nocrt" to disable critical actionsLen Brown2007-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thermal.nocrt=1 disables actions on _CRT and _HOT ACPI thermal zone trip-points. They will be marked as <disabled> in /proc/acpi/thermal_zone/*/trip_points. There are two cases where this option is used: 1. Debugging a hot system crossing valid trip point. If your system fan is spinning at full speed, be sure that the vent is not clogged with dust. Many laptops have very fine thermal fins that are easily blocked. Check that the processor fan-sink is properly seated, has the proper thermal grease, and is really spinning. Check for fan related options in BIOS SETUP. Sometimes there is a performance vs quiet option. Defaults are generally the most conservative. If your fan is not spinning, yet /proc/acpi/fan/ has files in it, please file a Linux/ACPI bug. WARNING: you risk shortening the lifetime of your hardware if you use this parameter on a hot system. Note that this refers to all system components, including the disk drive. 2. Working around a cool system crossing critical trip point due to erroneous temperature reading. Try again with CONFIG_HWMON=n There is known potential for conflict between the the hwmon sub-system and the ACPI BIOS. If this fixes it, notify lm-sensors@lm-sensors.org and linux-acpi@vger.kernel.org Otherwise, file a Linux/ACPI bug, or notify just linux-acpi@vger.kernel.org. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: thermal: create "thermal.psv=" to override passive trip pointsLen Brown2007-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "thermal.psv=-1" disables passive trip points for all ACPI thermal zones. "thermal.psv=C", where 'C' is degrees Celsius, overrides all existing passive trip points for all ACPI thermal zones. thermal.psv is checked at module load time, and in response to trip-point change events. Note that if the system does not deliver thermal zone temperature change events near the new trip-point, then it will not be noticed. To force your custom trip point to be noticed, you may need to enable polling: eg. thermal.tzp=3000 invokes polling every 5 minutes. Note that once passive thermal throttling is invoked, it has its own internal Thermal Sampling Period (_TSP), that is unrelated to _TZP. WARNING: disabling or raising a thermal trip point may result in increased running temperature and shorter hardware lifetime on some systems. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: thermal: expose "thermal.tzp=" to set global polling frequencyLen Brown2007-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thermal Zone Polling frequency (_TZP) is an optional ACPI object recommending the rate that the OS should poll the associated thermal zone. If _TZP is 0, no polling should be used. If _TZP is non-zero, then the platform recommends that the OS poll the thermal zone at the specified rate. The minimum period is 30 seconds. The maximum period is 5 minutes. (note _TZP and thermal.tzp units are in deci-seconds, so _TZP = 300 corresponds to 30 seconds) If _TZP is not present, ACPI 3.0b recommends that the thermal zone be polled at an "OS provided default frequency". However, common industry practice is: 1. The BIOS never specifies any _TZP 2. High volume OS's from this century never poll any thermal zones Ie. The OS depends on the platform's ability to provoke thermal events when necessary, and the "OS provided default frequency" is "never":-) There is a proposal that ACPI 4.0 be updated to reflect common industry practice -- ie. no _TZP, no polling. The Linux kernel already follows this practice -- thermal zones are not polled unless _TZP is present and non-zero. But thermal zone polling is useful as a workaround for systems which have ACPI thermal control, but have an issue preventing thermal events. Indeed, some Linux distributions still set a non-zero thermal polling frequency for this reason. But rather than ask the user to write a polling frequency into all the /proc/acpi/thermal_zone/*/polling_frequency files, here we simply document and expose the already existing module parameter to do the same at system level, to simplify debugging those broken platforms. Note that thermal.tzp is a module-load time parameter only. Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | ACPI: thermal: create "thermal.off=1" to disable ACPI thermal supportLen Brown2007-08-12
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "thermal.off=1" disables all ACPI thermal support at boot time. CONFIG_ACPI_THERMAL=n can do this at build time. "# rmmod thermal" can do this at run time, as long as thermal is built as a module. WARNING: On some systems, disabling ACPI thermal support will cause the system to run hotter and reduce the lifetime of the hardware. Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Pull bugzilla-8768 into release branchLen Brown2007-08-12
|\ \ \ \
| * | | | ACPI: Battery: Synchronize battery operations.Alexey Starikovskiy2007-08-03
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=8768 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Pull bugzilla-3774 into release branchLen Brown2007-08-12
|\ \ \ \
| * | | | ACPI: add "acpi_no_auto_ssdt" bootparamLen Brown2007-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "acpi_no_auto_ssdt" prevents Linux from automatically loading all the SSDTs listed in the RSDT/XSDT. This is needed for debugging. In particular, it allows a DSDT override to optionally be a DSDT+SSDT override. http://bugzilla.kernel.org/show_bug.cgi?id=3774 Signed-off-by: Len Brown <len.brown@intel.com>
| | | | |
| \ \ \ \
| \ \ \ \
| \ \ \ \
*---. \ \ \ \ pull asus sony thinkpad into release branchLen Brown2007-08-12
|\ \ \ \ \ \ \ | |_|_|_|_|/ / |/| | | | | |
| | | * | | | ACPI: thinkpad-acpi: change thinkpad-acpi input default and kconfig helpHenrique de Moraes Holschuh2007-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current kconfig help text was misleading users. Also, the default for an input-layer-optimized support caused way too many problems without up-to-date userspace in place. So, rework the help text, and change the default to N. Note that distributions are supposed to enable this option as soon as they update HAL to a version that handles the thinkpad-acpi new input layer interface. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | * | | | ACPI: thinkpad-acpi: fix the module init failure pathHenrique de Moraes Holschuh2007-08-03
| | | | |/ / | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas Renninger reports that if one tries to load thinkpad-acpi in a non-thinkpad, one gets: Call Trace: [<ffffffff802fa57d>] kref_get+0x2f/0x36 [<ffffffff802f97f7>] kobject_get+0x12/0x17 [<ffffffff8036dfd7>] get_driver+0x14/0x1a [<ffffffff8036dfee>] driver_remove_file+0x11/0x32 [<ffffffff8823b9be>] :thinkpad_acpi:thinkpad_acpi_module_exit+0xa8/0xfc [<ffffffff8824b8a0>] :thinkpad_acpi:thinkpad_acpi_module_init+0x74a/0x776 [<ffffffff8024f968>] __link_module+0x0/0x25 [<ffffffff80252269>] sys_init_module+0x162c/0x178f [<ffffffff8020bc2e>] system_call+0x7e/0x83 So, track if the platform driver and its driver attributes were registered, and only deallocate them in that case. This patch is based on Thomas Renninger's patch for the issue. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | | sonypi: fix ids member of struct acpi_driverEugene Teo2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ids member of struct acpi_driver is of type struct acpi_device_id, not a character array. Signed-off-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | | sony-laptop: sony_nc_ids[] can become static.Adrian Bunk2007-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | | sony-laptop: restore the last user requested brightness level on resume.Mattia Dongili2007-08-03
| | |/ / / | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
| * / / / asus_acpi: fix possible double free (found by Coverity)Jesper Juhl2007-08-03
| |/ / / | | | | | | | | | | | | | | | | Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds2007-08-11
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] monwriter: Serialization bug for multithreaded applications. [S390] vmur: diag14 only works with buffers below 2GB [S390] vmur: add "top of queue" sanity check for reader open [S390] vmur: reject open on z/VM reader files with status HOLD [S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happy [S390] vmur: allocate single record buffers instead of one big data buffer [S390] remove DEFAULT_MIGRATION_COST [S390] qdio: make sure data structures are correctly aligned. [S390] hypfs: implement show_options [S390] cio: avoid memory leak on error in css_alloc_subchannel().
| * | | | [S390] monwriter: Serialization bug for multithreaded applications.Melissa Howland2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Locking added so that multithreaded applications can now do writes from different threads without the risk of storage corruption. Signed-off-by: Melissa Howland <melissah@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] vmur: diag14 only works with buffers below 2GBMichael Holzheu2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If memory buffers above 2GB are used, diagnose 14 raises a specification exception. This fix ensures that buffer allocation is done below the 2GB boundary. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] vmur: add "top of queue" sanity check for reader openMichael Holzheu2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the z/VM reader is already open, it can happen that after opening the Linux reader device, not the topmost file is processed. According the semantics of the Linux z/VM unit record device driver, always the topmost file has to be processed. With this fix an error is returned if that is not the case. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] vmur: reject open on z/VM reader files with status HOLDMichael Holzheu2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a reader file with HOLD status is at the top of the reader queue, currently all read requests will return data of the second file in the queue. But the semantics of vmur is that always the topmost file is read. With this fix -EPERM is returned on open, if the topmost reader file is in HOLD status. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] vmur: use DECLARE_COMPLETION_ONSTACK to keep lockdep happyHeiko Carstens2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. 000000000ff9fb08 000000000ff9fb18 0000000000000002 0000000000000000 000000000ff9fbb8 000000000ff9fb30 000000000ff9fb30 0000000000104198 0000000000000000 0000000000000002 0000000000000000 0000000000000000 000000000ff9fb18 000000000000000c 000000000ff9fb18 000000000ff9fb88 0000000000448db0 0000000000104198 000000000ff9fb18 000000000ff9fb68 Call Trace: ([<00000000001040ea>] show_trace+0x12e/0x170) [<00000000001041f2>] show_stack+0xc6/0xf8 [<0000000000104252>] dump_stack+0x2e/0x3c [<0000000000155f9c>] __lock_acquire+0x460/0x1048 [<0000000000156c16>] lock_acquire+0x92/0xb8 [<000000000043f406>] _spin_lock_irqsave+0x62/0x80 [<0000000000121382>] complete+0x32/0x78 [<000000001082b468>] ur_int_handler+0xc8/0xec [vmur] [<0000000000313216>] ccw_device_call_handler+0xae/0xd4 [<0000000000310da4>] ccw_device_irq+0x5c/0x130 [<0000000000312c84>] io_subchannel_irq+0x8c/0x118 [<000000000030a88c>] do_IRQ+0x16c/0x194 [<0000000000111a62>] io_no_vtime+0x16/0x1c [<0000000080001394>] 0x80001394 Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] vmur: allocate single record buffers instead of one big data bufferMichael Holzheu2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmur allocates one contiguous kernel buffer to copy user data when creating ccw programs for punch or printer. If big block sizes are used, under memory pressure it can happen, that we do not get memory in one chunk. Now we allocate memory for each single record to avoid high order allocations. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] qdio: make sure data structures are correctly aligned.Heiko Carstens2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The slsb structure contained at the beginning of the qdio_q structure must start on a 256 byte boundary. To make sure this is the case even if slab debugging is turned on create an own slab cache for qdio_q structures. Besides that don't use the slab allocator to allocate whole pages. Use the page allocator instead. Also fix a few memory leaks in error handling code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | | [S390] cio: avoid memory leak on error in css_alloc_subchannel().Cornelia Huck2007-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sch->lock has been allocated in cio_validate_subchannel(), it must be freed if cio_modify() fails. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2007-08-11
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: BLOCK: Hide the contents of linux/bio.h if CONFIG_BLOCK=n sysace: HDIO_GETGEO has it's own method for ages drivers/block/cpqarray.c: better error handling and kmalloc + memset conversion to k[cz]alloc drivers/block/cciss.c: kmalloc + memset conversion to kzalloc Clean up duplicate includes in drivers/block/ Fix remap handling by blktrace [PATCH] remove mm/filemap.c:file_send_actor()
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-19 05:41:03 -0500