aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2)Tejun Heo2006-12-16
| | | | | | | | | | | | | | Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_svw: Disable ATAPI DMA on current boards (errata workaround)Jeff Garzik2006-12-16
| | | | | | | | | Current Broadcom/Serverworks SATA boards (including Apple K2 SATA) have problems with ATAPI DMA, so it is disabled. ATAPI PIO, ATA PIO, and ATA DMA continue to work just fine. Acked-by: Anantha Subramanyam <ananth@broadcom.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] use kmap_atomic(KM_IRQ0) in SCSI simulatorJeff Garzik2006-12-16
| | | | | | | | | | | | | | | | | | | We are inside spin_lock_irqsave(). quoth akpm's debug facility: [ 231.948000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 232.232000] ata1.00: configured for UDMA/33 [ 232.404000] WARNING (1) at arch/i386/mm/highmem.c:47 kmap_atomic() [ 232.404000] [<c01162e6>] kmap_atomic+0xa9/0x1ab [ 232.404000] [<c0242c81>] ata_scsi_rbuf_get+0x1c/0x30 [ 232.404000] [<c0242caf>] ata_scsi_rbuf_fill+0x1a/0x87 [ 232.404000] [<c0243ab2>] ata_scsiop_mode_sense+0x0/0x309 [ 232.404000] [<c01729d5>] end_bio_bh_io_sync+0x0/0x37 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c02311c6>] scsi_done+0x0/0x16 [ 232.404000] [<c0242dcc>] ata_scsi_simulate+0xb0/0x13f [...] Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] ata_piix: use piix_host_stop() in ich_pata_opsTejun Heo2006-12-16
| | | | | | | | | | | | piix_init_one() allocates host private data which should be freed by piix_host_stop(). ich_pata_ops wasn't converted to piix_host_stop() while merging, leaking 4 bytes on driver detach. Fix it. This was spotted using Kmemleak by Catalin Marinas. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Catalin Marinas <catalin.marinas@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] ata_piix: IDE mode SATA patch for Intel ICH9Jason Gaston2006-12-16
| | | | | | | | | | This updated patch adds the Intel ICH9 IDE mode SATA controller DID's. Signed-off-by: Jason Gaston <jason.d.gaston@intel.com> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [S390] cio: css_register_subchannel race.Stefan Bader2006-12-15
| | | | | | | | | Asynchronous probe can release memory of a subchannel before css_get_ssd_info is called. To fix this call css_get_ssd_info before registering with driver core. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Fix reboot hang on LPARsMichael Holzheu2006-12-15
| | | | | | | | | | | | | | Reboot hangs on LPARs without diag308 support. The reason for this is, that before the reboot is done, the channel subsystem is shut down. During the reset on each possible subchannel a "store subchannel" is done. This operation can end in a program check interruption, if the specified subchannel set is not implemented by the hardware. During the reset, currently we do not have a program check handler, which leads to the described kernel bug. We install now a new program check handler for the reboot code to fix this problem. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] sclp_cpi module license.Christian Borntraeger2006-12-15
| | | | | | | sclp_cpi is GPL. Make the module not taint the kernel Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] zcrypt: module unload fixes.Ralph Wuerthner2006-12-15
| | | | | | | | Add code to reset all queues for a domain and add missing tasklet_kill call to ap bus module exit code. Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* [S390] Hipersocket multicast queue: make sure outbound handler is calledUrsula Braun2006-12-15
| | | | | | | | | | A HiperSocket multicast queue works asynchronously. When sending buffers, the buffer state change from PRIMED to EMPTY may happen delayed. Reschedule the checking for changes in the outbound queue, if there are still PRIMED buffers. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Driver core: Make platform_device_add_data accept a const pointerScott Wood2006-12-13
| | | | | | | | | | | | platform_device_add_data() makes a copy of the data that is given to it, and thus the parameter can be const. This removes a warning when data from get_property() on powerpc is handed to platform_device_add_data(), as get_property() returns a const pointer. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: "platform_driver_probe() can save codespace": save codespaceAndrew Morton2006-12-13
| | | | | | | | | | | This function can be __init Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* driver core: delete virtual directory on class_unregister()Akinobu Mita2006-12-13
| | | | | | | | | Class virtual directory is created as the need arises. But it is not deleted when the class is unregistered. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Add support for Korenix 16C950-based PCI cardsRussell King2006-12-13
| | | | | | | | | | | | | | This adds initial support to 8250-pci for the Korenix Jetcard PCI serial cards. The JC12xx cards are standard RS232-based serial cards utilising the Oxford 16C950 device. The JC14xx are RS422/RS485-based cards, but in order for these to be supported natively, we will need additional tweaks to the 8250 layers so we can specify some values for the 950's registers. Hence, these two entries are commented out. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-blockLinus Torvalds2006-12-13
|\ | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block: [PATCH] Fixup cciss error handling [PATCH] Allow as-iosched to be unloaded [PATCH 2/2] cciss: remove calls to pci_disable_device [PATCH 1/2] cciss: map out more memory for config table [PATCH] Propagate down request sync flag Resolve trivial whitespace conflict in drivers/block/cciss.c manually.
| * [PATCH] Fixup cciss error handlingJens Axboe2006-12-13
| | | | | | | | | | | | | | The previous cciss commit removed the err_out_disable_pdev label, but there was still a user of that. Fix that up. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * [PATCH 2/2] cciss: remove calls to pci_disable_devicemike.miller@hp.com2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes calls to pci_disable_device except in fail_all_cmds. The pci_disable_device function does something nasty to Smart Array controllers that pci_enable_device does not undo. So if the driver is unloaded it cannot be reloaded. Also, customers can disable any pci device via the ROM Based Setup Utility (RBSU). If the customer has disabled the controller we should not try to blindly enable the card from the driver. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * [PATCH 1/2] cciss: map out more memory for config tablemike.miller@hp.com2006-12-13
| | | | | | | | | | | | | | | | | | This patch maps out more memory for our config table. It's required to reach offset 0x214 to disable DMA on the P600. I'm not sure how I lost this hunk. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds2006-12-13
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: hwmon: Add MAINTAINERS entry for new ams driver hwmon: New AMS hardware monitoring driver hwmon/w83793: Add documentation and maintainer hwmon: New Winbond W83793 hardware monitoring driver hwmon: Update Rudolf Marek's e-mail address hwmon/f71805f: Fix the device address decoding hwmon/f71805f: Always create all fan inputs hwmon/f71805f: Add support for the Fintek F71872F/FG chip hwmon: New PC87427 hardware monitoring driver hwmon/it87: Remove the SMBus interface support hwmon/hdaps: Update the list of supported devices hwmon/hdaps: Move the DMI detection data to .data hwmon/pc87360: Autodetect the VRM version hwmon/f71805f: Document the fan control features hwmon/f71805f: Add support for "speed mode" fan speed control hwmon/f71805f: Support DC fan speed control mode hwmon/f71805f: Let the user adjust the PWM base frequency hwmon/f71805f: Add manual fan speed control hwmon/f71805f: Store the fan control registers
| * | hwmon: New AMS hardware monitoring driverStelian Pop2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: New Winbond W83793 hardware monitoring driverRudolf Marek2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: Update Rudolf Marek's e-mail addressJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Fix the device address decodingJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Always create all fan inputsJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Add support for the Fintek F71872F/FG chipJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon: New PC87427 hardware monitoring driverJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/it87: Remove the SMBus interface supportJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This interface was useless as the LPC ISA-like interface is always available, is faster, and is more reliable. This cuts the driver size by some 20%. This change is also required to later convert the it87 driver to a platform driver, so that we can get rid of i2c-isa in a near future. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/hdaps: Update the list of supported devicesStephan Berberig2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the strange DMI for the R52 (1846AQG) and add a note to update to latest BIOS in the Kconfig and source code. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Robert Love <rlove@rlove.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/hdaps: Move the DMI detection data to .dataJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the DMI detection data from .text to .data. We really don't want that amount of data on the stack. Also refactor the macros used to generate the detection data, the vendor becomes a parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Robert Love <rlove@rlove.org>
| * | hwmon/pc87360: Autodetect the VRM versionJim Cromie2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | pc87360 currently hardcodes vrm = 90 (2.4 vintage). Update it to use newer code in hwmon-vid which reads cpuid to determine the correct vid. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Add support for "speed mode" fan speed controlJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | In "speed mode", the user specifies a target fan speed (in RPM) and the chip automatically adjusts the PWM duty cycle (or DC output level) to reach this target. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Support DC fan speed control modeJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | In DC mode, the pwmN_freq files are not created. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Let the user adjust the PWM base frequencyJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | Different frequencies can give better results depending on the exact fan model used. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Add manual fan speed controlJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | pwmN files are writable only in manual fan speed control mode. In automatic fan speed control modes, they are read-only and report the duty cycle chosen by the chip. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * | hwmon/f71805f: Store the fan control registersJean Delvare2006-12-12
| | | | | | | | | | | | | | | | | | | | | | | | So far we were only extracting the fan skip bit from the fan control registers, but we'll soon need more bits so better store the whole register values. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] sstfb: add sysfs interfaceHelge Deller2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modify the sstfb (Voodoo1/2) driver: - fix a memleak when removing the sstfb module - fix sstfb to use the fbdev default videomode database - add module option "mode_option" to set initial screen mode - add sysfs-interface to turn VGA-passthrough on/off via /sys/class/graphics/fbX/vgapass - remove old debug functions from ioctl interface Signed-off-by: Helge Deller <deller@gmx.de> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] fbdev: remove references to non-existent fbmon_valid_timings()Geert Uytterhoeven2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove references to non-existent fbmon_valid_timings() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] HPT37x: read f_CNT saved by BIOS from portSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The undocumented register BIOS uses for saving f_CNT seems to only be mapped to I/O space while all the other HPT3xx regs are dual-mapped. Looks like another HighPoint's dirty trick. With this patch, the deadly kernel oops on the cards having the modern HighPoint BIOSes is now at last gone! Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: HPT3xx: fix PCI clock detectionSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the f_CNT value saved by the HighPoint BIOS if available as reading it directly would give us a wrong PCI frequency after DPLL has already been calibrated by BIOS. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: fix the case of multiple HPT3xx chips presentSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | init_chipset_hpt366() modifies some fields of the ide_pci_device_t structure depending on the chip's revision, so pass it a copy of the structure to avoid issues when multiple different chips are present. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: fix HPT3xx hotswap supportSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the broken hotswap code: on HPT37x it caused RESET- to glitch when tristating the bus (the MISC control 3/6 and soft control 2 need to be written to in the certain order), and for HPT36x the obsolete HDIO_TRISTATE_HWIF ioctl() handler was called instead which treated the state argument wrong. Also, get rid of the soft control reg. 1 wtite to enable IDE interrupt -- this is done in init_hpt37x() already... Have been tested on HPT370 and 371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: optimize HPT37x timing tablesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Save some space on the timing tables by introducing the separate transfer mode table in which the mode lookup is done to get the index into the timing table itself. Get rid of the rest of the obsolete/duplicate tables and use one set of tables for the whole HPT37x chip family like the HighPoint open-source drivers do. Documnent the different timing register layout for the HPT36x chip family (this is my guesswork based on the timing values). Have been tested and works fine on HPT370/302/371N. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: fix HPT37x timing tablesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix/remove bad/unused timing tables: HPT370/A 66 MHz tables weren't really needed (the chips are not UltraATA/133 capable and shouldn't support 66 MHz PCI) and had many modes over- and underclocked, HPT372 33 MHz table was in fact for 66 MHz and 50 MHz table missed UltraDMA mode 6, HPT374 33 MHz table was really for 50 MHz... (Actually, HPT370/A 33 MHz tables also have issues. e.g. HPT370 has PIO modes 0/1 overlocked.) There's also no need in the separate HPT374 tables because HPT372 timings should be the same (and those tables has UltraDMA mode 6 which HPT374 supports depending on HPT374_ALLOW_ATA133_6 #define)... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: HPT3xxN clocking fixesSergei Shtylyov2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix serious problems with the HPT372N clock turnaround code: - the wrong ports were written to when called for the secondary channel; - it didn't serialize access to the channels; - turnaround shou;dn't be done on 66 MHz PCI; - caching the clock mode per-channel caused it to get out of sync with the actual register value. Additionally, avoid calibrating PLL twice (for each channel) as the second try results in a wrong PCI frequency and thus in the wrong timings. Make the driver deal with HPT302N and HPT371N correctly -- the clocking and (seemingly) a need for clock tunaround is the same as for HPT372N. HPT371/N chips have only one, secondary channel, so avoid touching their "pure virtual" primary channel, and disable it if the BIOS haven't done this already. Also, while at it, disable UltraATA/133 for HPT372 by default -- 50 MHz DPLL clock don't allow for this speed anyway. And remove the traces of the former bad patch that wasn't even applicable to this version of driver. Has been tested on HPT370/371N, unfortunately I don't have an instant access to the other chips... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] remove the broken BLK_DEV_SWIM_IOP driverAdrian Bunk2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BLK_DEV_SWIM_IOP driver has: - already been marked as BROKEN in 2.6.0 three years ago and - is still marked as BROKEN. Drivers that had been marked as BROKEN for such a long time seem to be unlikely to be revived in the forseeable future. But if anyone wants to ever revive this driver, the code is still present in the older kernel releases. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jens Axboe <jens.axboe@oracle.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] n_r3964: Use struct pid to track user space clientsEric W. Biederman2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently this driver tracks user space clients it should send signals to. In the presenct of file descriptor passing this is appears susceptible to confusion from pid wrap around issues. Replacing this with a struct pid prevents us from getting confused, and prepares for a pid namespace implementation. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] tty_io.c balance tty_ldisc_ref()Dan Carpenter2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tty_ldisc_deref() should only be called when tty_ldisc_ref() succeeds otherwise it triggers a BUG(). There's already a function tty_ldisc_flush() that flushes properly. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] rtc framewok: rtc_wkalrm.enabled reporting updatesDavid Brownell2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a glitch in the procfs dumping of whether the alarm IRQ is enabled: use the traditional name (from drivers/char/rtc.c and many other places) of "alarm_IRQ", not "alrm_wakeup" (which didn't even match the efirtc code, which originated that reporting API). Also, update a few of the RTC drivers to stop providing that duplicate status, and/or to expose it properly when reporting the alarm state. We really don't want every RTC driver doing their own thing here... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] rtc: remove syslog spam on registrationDavid Brownell2006-12-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes some syslog spam as RTC drivers register; debug messages shouldn't come out at "info" level. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 12:23:40 -0500