aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [TG3]: 5784 / 5764 GPHY power down fixMatt Carlson2007-11-13
| | | | | | | | | | | | | | 5784 and 5764 devices fail to link / pass traffic after one load / unload cycle. This happens because of a hardware bug in the new CPMU. During normal operation, the MAC depends on the PHY clock being available. When the PHY is powered down, the clock the MAC depends on is disabled. The fix is to switch the MAC clock to an alternate source before powering down the PHY, and to restore the MAC clock to the PHY source upon device resume. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Fix 5761 PXEboot crashMatt Carlson2007-11-13
| | | | | | | | | | | | | | | | When 5761 devices boot the machine using PXEboot, PXE leaves the device active when it terminates. The tg3 driver has code to detect this condition and resets the device during initialization. On 5761 devices, device resets involve sending a driver state update message to the APE on the 5761. However, during this initialization stage, communications to the APE registers have not yet been set up. The driver then dereferences a NULL pointer and crashes the machine. The fix is to move the APE register access setup earlier in the initialization code to cover this condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Remove references to net-modules.txt.Adrian Bunk2007-11-13
| | | | | | | | | When I removed net-modules.txt because it only contained ancient information I missed that many Kconfig entries pointed to this ancient information. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Add the helper kernel_sock_shutdown()Trond Myklebust2007-11-12
| | | | | | | | | | | | | | | ...and fix a couple of bugs in the NBD, CIFS and OCFS2 socket handlers. Looking at the sock->op->shutdown() handlers, it looks as if all of them take a SHUT_RD/SHUT_WR/SHUT_RDWR argument instead of the RCV_SHUTDOWN/SEND_SHUTDOWN arguments. Add a helper, and then define the SHUT_* enum to ensure that kernel users of shutdown() don't get confused. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Mark Fasheh <mark.fasheh@oracle.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SUNGEM]: Fix suspend regression due to NAPI changes.Johannes Berg2007-11-12
| | | | | | | | | | | | | | | | | | Commit bea3348e (the NAPI changes) made sungem unconditionally enable NAPI when resuming and unconditionally disable when suspending, this, however, makes napi_disable() hang when suspending when the interface was taken down before suspend because taking the interface down also disables NAPI. This patch makes touching the napi struct in suspend/resume code paths depend on having the interface up, thereby fixing the hang on suspend. The patch also moves the napi_disable() in gem_close() under the lock so that the NAPI state is always modified atomically together with the "opened" variable. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PPP]: Remove ptr comparisons to 0Joe Perches2007-11-12
| | | | | | | fix sparse warnings "Using plain integer as NULL pointer" Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-11-12
|\ | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: SVM: Intercept the 'invd' and 'wbinvd' instructions KVM: x86 emulator: invd instruction KVM: SVM: Defer nmi processing until switch to host state is complete KVM: SVM: Fix SMP with kernel apic KVM: x86 emulator: fix 'push imm8' emulation
| * KVM: SVM: Intercept the 'invd' and 'wbinvd' instructionsAvi Kivity2007-11-08
| | | | | | | | | | | | | | | | | | 'invd' can destroy host data, and 'wbinvd' allows the guest to induce long (milliseconds) latencies. Noted by Ben Serebrin. Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: x86 emulator: invd instructionAvi Kivity2007-11-08
| | | | | | | | | | | | Emulate the 'invd' instruction (opcode 0f 08). Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: SVM: Defer nmi processing until switch to host state is completeAvi Kivity2007-11-08
| | | | | | | | | | | | | | | | If we stgi() too soon, nmis can reach the processor even though interrupts are disabled, catching it in a half-switched state. Delay the stgi() until we're done switching. Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: SVM: Fix SMP with kernel apicAvi Kivity2007-11-08
| | | | | | | | | | | | AP processor needs to reset to the SIPI vector, not normal INIT. Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: x86 emulator: fix 'push imm8' emulationAvi Kivity2007-11-08
| | | | | | | | | | | | | | | | 'push imm8' found itself in the wrong switch somehow, so it is never executed. This fixes Windows 2003 installation. Signed-off-by: Avi Kivity <avi@qumranet.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-12
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtio * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-virtio: virtio: Force use of power-of-two for descriptor ring sizes lguest: Fix lguest virtio-blk backend size computation virtio: Fix used_idx wrap-around virtio: more fallout from scatterlist changes. virtio: fix vring_init for 64 bits
| * | virtio: Force use of power-of-two for descriptor ring sizesRusty Russell2007-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The virtio descriptor rings of size N-1 were nicely set up to be aligned to an N-byte boundary. But as Anthony Liguori points out, the free-running indices used by virtio require that the sizes be a power of 2, otherwise we get problems on wrap (demonstrated with lguest). So we replace the clever "2^n-1" scheme with a simple "align to page boundary" scheme: this means that all virtio rings take at least two pages, but it's safer than guessing cache alignment. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: Fix used_idx wrap-aroundAnthony Liguori2007-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The more_used() function compares the vq->vring.used->idx with last_used_idx. Since vq->vring.used->idx is a 16-bit integer, and last_used_idx is an unsigned int, this results in unpredictable behavior when vq->vring.used->idx wraps around. This patch corrects this by changing last_used_idx to the correct type. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
| * | virtio: more fallout from scatterlist changes.Rusty Russell2007-11-11
| | | | | | | | | | | | | | | | | | This fixes OOPS in network driver when CONFIG_DEBUG_SG=y. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* | | ssb: Fix PCMCIA-host lowlevel bus accessMichael Buesch2007-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the lowlevel bus access routines for PCMCIA based devices. There are still a few issues with register access sideeffects after this patch. This will be addressed in a later patch. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | iwlwifi: select proper rate control algorithmJohannes Berg2007-11-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to this patch, iwlwifi would always use the first registered rate control algorithm which, depending on system setup, could be anything. After the mac80211 patch to make the simple algorithm built-in, it would always be simple. This has always been a bug in iwlwifi. This fixes it by requesting that mac80211 selects the right rate control algorithm. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | ssb: Fix initcall orderingMichael Buesch2007-11-11
|/ / | | | | | | | | | | | | | | | | ssb must init after PCI but before the ssb drivers. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Christian Casteyde <casteyde.christian@free.fr> Fixes-bug: #9219 Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ACPI: add documentation for deprecated /proc/acpi/battery in ACPI_PROCFSJerome Pinot2007-11-10
| | | | | | | | | | | | | | | | | | Add documentation in Kconfig help about the move of /proc/acpi/battery to /sys/class/power_supply when selecting ACPI_PROCFS. This will impact a lot of users and should be documented. Signed-off-by: Jerome Pinot <ngc891@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-10
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: Add missing "\n" to log message
| * | Add missing "\n" to log messageRolf Eike Beer2007-11-10
| | | | | | | | | | | | | | | Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-11-10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Don't fail device revalidation for bad _GTF methods libata: port and host should be stopped before hardware resources are released libata: skip 0xff polling for PATA controllers libata: pata_platform: Support polling-mode configuration. libata: Support PIO polling-only hosts. libata sata_qstor conversion to new error handling (EH). libata sata_qstor workaround for spurious interrupts libata sata_qstor nuke idle state nv_hardreset: update dangling reference to bugzilla entry ata_piix: add SATELLITE PRO U200 to broken suspend list
| * | | libata: Don't fail device revalidation for bad _GTF methodsMatthew Garrett2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Experience suggests that the _GTF method may be bad. We currently fail device revalidation in that case, which seems excessive. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata: port and host should be stopped before hardware resources are releasedTejun Heo2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata: skip 0xff polling for PATA controllersTejun Heo2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In a presentation of true workmanship, pata_ali asserts IRQ permanantly if the TF status register is read more than once when there's no device attached to the port. Avoid waiting polling for !0xff if it's PATA. It's needed only for some rare SATA devices anyway. This problem is reported by Luca Tettamanti in bugzilla bug 9298. Signed-off-by: Tejun Heo <htejun@gmail.com> Tested-By: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata: pata_platform: Support polling-mode configuration.Paul Mundt2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SH boards (old R2D-1 boards) have generally not had working CF under libata, due to both buswidth issues (handled by Aoi Shinkai in 43f4b8c7578b928892b6f01d374346ae14e5eb70), and buggy interrupt controllers. For these sorts of boards simply disabling the IRQ and polling ends up working fine. This conditionalizes the IRQ resource for pata_platform and lets platforms that want to use polling mode simply omit the resource entirely. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata: Support PIO polling-only hosts.Paul Mundt2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By default ata_host_activate() expects a valid IRQ in order to successfully register the host. This patch enables a special case for registering polling-only hosts that either don't have IRQs or have buggy IRQ generation (either in terms of handling or sensing), which otherwise work fine. Hosts that want to use polling mode can simply set ATA_FLAG_PIO_POLLING and pass in an invalid IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata sata_qstor conversion to new error handling (EH).Mark Lord2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_qstor conversion to new error handling (EH). Convert sata_qstor to use the newer libata EH mechanisms. Based on earlier work by Jeff Garzik. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata sata_qstor workaround for spurious interruptsMark Lord2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_qstor workaround for spurious interrupts. The qstor hardware generates spurious interrupts from time to time when switching in and out of packet mode. These eventually result in the IRQ being disabled, which kills other devices sharing this IRQ with us. This workaround isn't perfect, but it's about the best we can do for this hardware. Spurious interrupts will still happen, but won't be logged as such, and therefore won't cause the IRQ to be inadvertently disabled. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | libata sata_qstor nuke idle stateMark Lord2007-11-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_qstor nuke idle state. We're really only ever in one of two hardware states: packet, or mmio. Get rid of unnecessary "qs_state_idle" state. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | nv_hardreset: update dangling reference to bugzilla entryFernando Luis Vázquez Cao2007-11-08
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | ata_piix: add SATELLITE PRO U200 to broken suspend listYann Chachkoff2007-11-08
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Please warmly welcome the PRO variant of Satellite U200 to the broken suspend list. Original patch is from Yann Chachkoff. Patch reformatted and forwarded by Tejun Heo. Signed-off-by: Yann Chachkoff <yann.chachkoff@myrealbox.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | r8169: prevent bit sign expansion error in mdio_writeFrancois Romieu2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Oops. The current code does not like being given an u16 with the highest bit set as an argument to mdio_write. Let's enforce a correct range of values for both the register address and value (resp. 5 and 16 bits). The callers are currently left as-is. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* | | r8169: revert 7da97ec96a0934319c7fbedd3d38baf533e20640 (bis repetita)Mark Lord2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | RTL_GIGA_MAC_VER_17 breaks as well. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Edward Hsu <edward_hsu@realtek.com.tw>
* | | sky2: new pci id'sStephen Hemminger2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | Found a couple of more chips in the latest version of the vendor driver. They are minor variations on existing chips. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | ax88796: add superh to kconfig dependenciesMagnus Damm2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | ax88796: add superh to kconfig dependencies This patch adds sh architecture support to the ax88796 kconfig. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | qla3xxx: bugfix: Fix bad logical operation in link state machine.Ron Mercer2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | Luckily, this wasn't reported or reproduced. The logical operation for setting duplex had wrong grouping. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | qla3xxx: bugfix: Move link state machine into a worker threadRon Mercer2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The link state machine requires access to some resources that are shared with the iSCSI function on the chip. (See iSCSI driver at drivers/scsi/qla4xxx) If the interface is being up/downed at a rapid pace this driver may need to sleep waiting to get access to the common resources. For this we are moving the state machine to run as a work thread. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | pasemi_mac: Fix CRC checksOlof Johansson2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure we don't feed packets with bad CRC up the network stack, and discount the packet length as reported from the MAC for the CRC field. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | pasemi_mac: Don't set replace-source-address descriptor bitsOlof Johansson2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | Don't use the "replace source address with local MAC address" bits, since it causes problems on some variations of the hardware due to an erratum. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | bonding: don't validate address at device openJay Vosburgh2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard validate_addr handler refuses to accept the all zeroes address as valid. However, it's common historical practice for the bonding master to be configured up prior to having any slaves, at which time the master will have a MAC address of all zeroes. Resolved by setting the dev->validate_addr to NULL. The master still can't end up with an invalid address, as the set_mac_address function tests for validity. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | bonding: fix rtnl locking merge errorJay Vosburgh2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like I incorrectly merged one of the rtnl lock changes, so that one function, bonding_show_active_slave, held rtnl but didn't release it, and another, bonding_store_active_slave, never held rtnl but did release it. Fixed so the first function doesn't mess with rtnl, and the second correctly acquires and releases rtnl. Bug reported by Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | sky2: netpoll on port 0 onlyStephen Hemminger2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | Netpoll will only work on port 0 because of the restrictive relationship between NAPI and netpoll. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | b43: Fix kconfig dependencies for rfkill and ledsMichael Buesch2007-11-10
| | | | | | | | | | | | | | | | | | | | | Fix dependencies for built-in b43. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43legacy: Fix sparse warningMichael Buesch2007-11-10
| | | | | | | | | | | | | | | | | | | | | Fix a sparse warning about a nonstatic function. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43: properly request pcmcia IRQMichael Buesch2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PCMCIA needs an additional step to request the IRQ. No need to add code to release the IRQ here, as that's done automatically in pcmcia_disable_device(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43legacy: fix shared IRQ race conditionStefano Brivio2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an IRQ race condition in b43legacy. If we call b43legacy_wireless_core_stop(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43: fix shared IRQ race conditionStefano Brivio2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an IRQ race condition in b43. If we call b43_stop_wireless_core(), it will set the status of the device to INITIALIZED and the IRQ handler won't care any longer about IRQs, thus the kernel will disable the IRQ if it's shared (unless we boot it with the 'irqpoll' option). So we must disable IRQs before changing the device status. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | b43legacy: fix possible buffer overrun in debugfsStefano Brivio2007-11-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix possible buffer overrun. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-17 05:55:48 -0500