aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-coreAndy Walls2008-06-26
| | | | | | | | | | Change the cx18-av-core code so that accesses to cx23418 av core that cause auto-configuration will be adjusted to emulate the auto-configuration behavior of the cx25843. This fixes the VBI displayed as video at the top of the frame for NTSC and probably other things. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISEMichael Krufky2008-06-26
| | | | | | | | | | | The automatic Kconfig selection for tuners and frontends should be conditional, based on !DVB_FE_CUSTOMISE. This patch corrects the selection for VIDEO_CX18 on MEDIA_TUNER_MXL5005S and DVB_S5H1409 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506Tim Farrington2008-06-26
| | | | | | | Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington <timf@iinet.net.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8044): au8522: tuning optimizationsMichael Krufky2008-06-26
| | | | | | | | | | | | If the current modulation and frequency is already set to the desired parameters, then don't re-tune. Don't store current frequency until after we've tuned successfully. Force a re-tune after resume from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8043): au0828: add support for additional USB device id'sMichael Krufky2008-06-26
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8042): DVB-USB UMT-010 channel scan oopsAustin Lund2008-06-26
| | | | | | | | | | | | | | | | In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. Not surprisingly this causes an oops for all devices which use the umt-010 chipset when they are inserted. fix on Kaffeine channel scan for Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: maximilian attems <max@stro.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8040): soc-camera: remove soc_camera_host_class classGuennadi Liakhovetski2008-06-26
| | | | | | | | | | | Devices can either be class devices or bus devices, not both at the same time. Soc-camera host devices usually have a platform device as their parent. Trying to also register them with a class crashes the kernel, when linked statically. Interestingly, it works when built as a module. Thanks to Paulius Zaleckas for reporting. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling.Guennadi Liakhovetski2008-06-26
| | | | | | | platform_get_irq() returns a negative value on error, not 0. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8037): tda18271: ensure that the thermometer is off during channel ↵Michael Krufky2008-06-26
| | | | | | | | | | configuration Having the thermometer on during channel configuration could cause tuning instability. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 onlyMichael Krufky2008-06-26
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of rangeMichael Krufky2008-06-26
| | | | | | | | | The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside of the frequency window 41 MHz - 61.1 MHz. In these cases, the internal RF tracking filters calibration mechanism is used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8034): tda18271: fix IF notch frequency handlingMichael Krufky2008-06-26
| | | | | | | | | The IF notch bit gets unset when we update the Main Post Div register value, before we have a chance to write the desired IF notch setting to the tuner. Move the IF notch configuration to after we update MPD. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8029): Improve error message at tda1004x_attachMauro Carvalho Chehab2008-06-26
| | | | | | | | | | | | | | | | | | | When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8028): Improve error messages for tda1004x attachMauro Carvalho Chehab2008-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input ↵Matthias Schwarzott2008-06-26
| | | | | | | | | | are working Describe exactly that only s-video and composite input are working on Avermedia A700 Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recoveredMauro Carvalho Chehab2008-06-26
| | | | | | | | | | | | On some alsa versions, it seems that snd_pcm_substream_chip(substream) is returning a NULL pointer. This causes an OOPS, as reported by: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960 This patch avoids the OOPS by not letting and open() succeed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8022): saa7134: fix race between opening and closing the deviceMarcin Slusarz2008-06-26
| | | | | | | | | | decrementing dev->empress_users should be done as last action of ts_release, because it sleeps and write access to dev->empress_started is not protected in any way (additionally closing thread could mute audio after opening thread unmuted it) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8020): Fix callbacks functions of saa7134_empressDmitri Belimov2008-06-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1 modules crashed: *pde = 00000000 Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan EIP is at __mutex_lock_slowpath+0x29/0x7b DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000) d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0 Call Trace: [<c028b52b>] mutex_lock+0xa/0xb [<d08e5411>] videobuf_streamon+0xf/0x9a [videobuf_core] [<d0975acb>] __video_do_ioctl+0x136a/0x2d68 [videodev] [<d088f789>] task_end_request+0x40/0x51 [ide_core] [<d088c4aa>] ide_intr+0x187/0x192 [ide_core] [<c016a551>] mntput_no_expire+0x11/0x64 [<c0160b1c>] path_walk+0x90/0x98 [<d0977738>] video_ioctl2+0x173/0x239 [videodev] [<c0140936>] filemap_fault+0x202/0x370 [<c014930a>] __do_fault+0x2c3/0x2fe [<c014ab03>] handle_mm_fault+0x22a/0x49f [<c0162737>] vfs_ioctl+0x47/0x5d [<c0162992>] do_vfs_ioctl+0x245/0x258 [<c01629e6>] sys_ioctl+0x41/0x5b [<c01036a6>] sysenter_past_esp+0x5f/0x85 ======================= After this fix all of that commands works without problem: v4l2-ctl --all -d /dev/video1 Driver Info: Driver name : saa7134 Card type : Beholder BeholdTV M6 Extra Bus info : PCI:0000:00:0d.0 Driver version: 526 Capabilities : 0x05000001 Video Capture Read/Write Streaming Format Video Capture: Width/Height : 720/576 Pixel Format : MPEG Field : Any Bytes per Line: 0 Size Image : 58656 Colorspace : Unknown (00000000) Video input : 0 (CCIR656) Video Standard = 0x000000ff PAL-B/B1/G/H/I/D/D1/K P.S. data from /dev/video1 is not correct :(( . Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8018): Add em2860 chip IDDevin Heitmueller2008-06-26
| | | | | | | | | | em28xx-cards.c em28xx-reg.h - Add em2860 chip ID (seen on Pointnix Intra-Oral Camera) http://www.pointnix.com/ENG/dental/product_02.asp Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8017): Ensure em28xx extensions only get run against devs that ↵Devin Heitmueller2008-06-26
| | | | | | | | | | | | | support them em28xx-audio.c em28xx-dvb.c - Em28xx extensions should ensure they are being only loaded against devices that support them. Deals with case where there are multiple em28xx devices, some of which have DVB (or ALSA) support and some do not. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be ↵Antti Palosaari2008-06-26
| | | | | | | | | on the safe side - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8013): gl861: remove useless identify_stateAntti Palosaari2008-06-26
| | | | | | | - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8012): gl861: sleep a little to avoid I2C errorsAntti Palosaari2008-06-26
| | | | | | | - add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8011): em28xx: enable DVB for HVR-900Devin Heitmueller2008-06-26
| | | | | | | | | | em28xx-cards.c - DVB support is supposed to be enabled for the first generation HVR-900. This device was confirmed with DVB by mkrufky when we did the original work in April, but I guess we forgot to set the flag. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8010): em28xx: Properly register extensions for already attached ↵Devin Heitmueller2008-06-26
| | | | | | | | | | | | | | devices em28xx-video.c - Properly handle loading of the module when multiple devices are already connected (such as at bootup). Before we were only calling dvb_init() against the last device in the list, so while we were handling subsequent adds properly, if there were multiple devices present on driver load, everybody except the last device would not get initialized. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8008): cx18: remove duplicate audio and video input enumsHans Verkuil2008-06-26
| | | | | | | | | | | cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls <awalls@radix.net> for the report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputsHans Verkuil2008-06-26
| | | | | | | | The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8005): Fix OOPS if frontend is nullMauro Carvalho Chehab2008-06-26
| | | | | | | Thanks to timf <timf@iinet.net.au> and Mike Galbraith <efault@gmx.de> to report this issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (8004): Fix INPUT dependency at budget-ciMauro Carvalho Chehab2008-06-26
| | | | | | | | | | | | | | | | | | | | As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2008-06-24
|\ | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"
| * Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working"Wim Van Sebroeck2008-06-24
| | | | | | | | | | | | | | | | After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | enable bus mastering on i915 at resume timeJie Luo2008-06-24
|/ | | | | | | | | | On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: Jie Luo <clotho67@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2008-06-23
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xen: don't drop NX bit xen: mask unwanted pte bits in __supported_pte_mask xen: Use wmb instead of rmb in xen_evtchn_do_upcall(). x86: fix NULL pointer deref in __switch_to
| * xen: Use wmb instead of rmb in xen_evtchn_do_upcall().Isaku Yamahata2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg. Use wmb instead of rmb to enforce ordering between evtchn_upcall_pending and evtchn_pending_sel stores in xen_evtchn_do_upcall(). Cc: Samuel Thibault <samuel.thibault@eu.citrix.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: the arch/x86 maintainers <x86@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
| * x86: fix NULL pointer deref in __switch_toSuresh Siddha2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I am able to reproduce the oops reported by Simon in __switch_to() with lguest. My debug showed that there is at least one lguest specific issue (which should be present in 2.6.25 and before aswell) and it got exposed with a kernel oops with the recent fpu dynamic allocation patches. In addition to the previous possible scenario (with fpu_counter), in the presence of lguest, it is possible that the cpu's TS bit it still set and the lguest launcher task's thread_info has TS_USEDFPU still set. This is because of the way the lguest launcher handling the guest's TS bit. (look at lguest_set_ts() in lguest_arch_run_guest()). This can result in a DNA fault while doing unlazy_fpu() in __switch_to(). This will end up causing a DNA fault in the context of new process thats getting context switched in (as opossed to handling DNA fault in the context of lguest launcher/helper process). This is wrong in both pre and post 2.6.25 kernels. In the recent 2.6.26-rc series, this is showing up as NULL pointer dereferences or sleeping function called from atomic context(__switch_to()), as we free and dynamically allocate the FPU context for the newly created threads. Older kernels might show some FPU corruption for processes running inside of lguest. With the appended patch, my test system is running for more than 50 mins now. So atleast some of your oops (hopefully all!) should get fixed. Please give it a try. I will spend more time with this fix tomorrow. Reported-by: Simon Holm Thøgersen <odie@cs.aau.dk> Reported-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Merge branch 'for-linus' of ↵Linus Torvalds2008-06-23
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Clear ICM pages before handing to FW
| * | IB/mthca: Clear ICM pages before handing to FWEli Cohen2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current memfree FW has a bug which in some cases, assumes that ICM pages passed to it are cleared. This patch uses __GFP_ZERO to allocate all ICM pages passed to the FW. Once firmware with a fix is released, we can make the workaround conditional on firmware version. This fixes the bug reported by Arthur Kepner <akepner@sgi.com> here: http://lists.openfabrics.org/pipermail/general/2008-May/050026.html Cc: <stable@kernel.org> Signed-off-by: Eli Cohen <eli@mellanox.co.il> [ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing ICM memory and memset()ing it to 0. - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | removed unused var real_tty on n_tty_ioctl()Gustavo Fernando Padovan2008-06-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | I noted that the 'struct tty_struct *real_tty' is not used in this function, so I removed the code about 'real_tty'. Signed-off-by: Gustavo Fernando Padovan <gustavo@las.ic.unicamp.br> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds2008-06-21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: (lm75) sensor reading bugfix hwmon: (abituguru3) update driver detection hwmon: (w83791d) new maintainer hwmon: (abituguru3) Identify Abit AW8D board as such hwmon: Update the sysfs interface documentation hwmon: (adt7473) Initialize max_duty_at_overheat before use hwmon: (lm85) Fix function RANGE_TO_REG()
| * | | hwmon: (lm75) sensor reading bugfixDavid Brownell2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * | | hwmon: (abituguru3) update driver detectionHans de Goede2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * | | hwmon: (abituguru3) Identify Abit AW8D board as suchHans de Goede2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * | | hwmon: (adt7473) Initialize max_duty_at_overheat before useJean Delvare2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * | | hwmon: (lm85) Fix function RANGE_TO_REG()Jean Delvare2008-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Justin Thiessen <jthiessen@penguincomputing.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2008-06-21
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: netns: Don't receive new packets in a dead network namespace. sctp: Make sure N * sizeof(union sctp_addr) does not overflow. pppoe: warning fix ipv6: Drop packets for loopback address from outside of the box. ipv6: Remove options header when setsockopt's optlen is 0 mac80211: detect driver tx bugs
| * | | | pppoe: warning fixStephen Hemminger2008-06-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2008-06-20
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: BAST: Remove old IDE driver pcmcia ide kingston compactflash's have a new manufacturer id pcmcia: add another pata/ide ID pcmcia: add an pata/ide ID ide: increase timeout in wait_drive_not_busy() palm_bk3710: fix resource management
| * | | | | BAST: Remove old IDE driverBen Dooks2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | | | pcmcia ide kingston compactflash's have a new manufacturer idChristophe Niclaes2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * | | | | pcmcia: add another pata/ide IDKristoffer Ericson2008-06-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-20 17:11:02 -0500