aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* drivers/edac: add new nmi rescanDave Jiang2007-07-19
| | | | | | | | | | | | | | | | | | | Provides a way for NMI reported errors on x86 to notify the EDAC subsystem pending ECC errors by writing to a software state variable. Here's the reworked patch. I added an EDAC stub to the kernel so we can have variables that are in the kernel even if EDAC is a module. I also implemented the idea of using the chip driver to select error detection mode via module parameter and eliminate the kernel compile option. Please review/test. Thx! Also, I only made changes to some of the chipset drivers since I am unfamiliar with the other ones. We can add similar changes as we go. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac-new-i82443bxgz-mc-driver: mark as brokenAndrew Morton2007-07-19
| | | | | | | | | | | It will claim the PCI devices from under intel_agp.ko's feet. Greg is brewing some fix for that. Cc: Douglas Thompson <dougthompson@xmission.com> Cc: Tim Small <tim@buttersideup.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: new i82443bxgz MC driverTim Small2007-07-19
| | | | | | | | | | This is a NEW EDAC Memory Controller driver for the 440BX chipset (I82443BXGX) created and submitted by Timm Small Signed-off-by: Tim Small <tim@buttersideup.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: core.h fix scrubdefsDouglas Thompson2007-07-19
| | | | | | | | Patch to fix some scrubbing #defines in the edac_core.h file Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: new intel 5000 MC driverEric Wollesen2007-07-19
| | | | | | | | | | | | | | | Eric Wollesen ported the Bluesmoke Memory Controller driver (written by Doug Thompson) for the Intel 5000X/V/P (Blackford/Greencreek) chipset to the in kernel EDAC model. This patch incorporates the module for the 5000X/V/P chipset family [m.kozlowski@tuxland.pl: edac i5000 parenthesis balance fix] Signed-off-by: Eric Wollesen <ericw@xmtp.net> Signed-off-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: change from semaphore to mutex operationMatthias Kaehlcke2007-07-19
| | | | | | | | | | | | | The EDAC core code uses a semaphore as mutex. use the mutex API instead of the (binary) semaphore. Matthaias wrote this, but since I had some patches ahead of it, I need to modify it to follow my patches. Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: mc sysfs add missing mem typesDave Jiang2007-07-19
| | | | | | | | | | Adding missing mem types for use in the sysfs presentation file for Memory Controller device objects. Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: add edac_device classDouglas Thompson2007-07-19
| | | | | | | | | | | | | | | | | | | | | | | This patch adds the new 'class' of object to be managed, named: 'edac_device'. As a peer of the 'edac_mc' class of object, it provides a non-memory centric view of an ERROR DETECTING device in hardware. It provides a sysfs interface and an abstraction for varioius EDAC type devices. Multiple 'instances' within the class are possible, with each 'instance' able to have multiple 'blocks', and each 'block' having 'attributes'. At the 'block' level there are the 'ce_count' and 'ue_count' fields which the device driver can update and/or call edac_device_handle_XX() functions. At each higher level are additional 'total' count fields, which are a summation of counts below that level. This 'edac_device' has been used to capture and present ECC errors which are found in a a L1 and L2 system on a per CORE/CPU basis. Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: split out functions to unique filesDouglas Thompson2007-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | This is a large patch to refactor the original EDAC module in the kernel and to break it up into better file granularity, such that each source file contains a given subsystem of the EDAC CORE. Originally, the EDAC 'core' was contained in one source file: edac_mc.c with it corresponding edac_mc.h file. Now, there are the following files: edac_module.c The main module init/exit function and other overhead edac_mc.c Code handling the edac_mc class of object edac_mc_sysfs.c Code handling for sysfs presentation edac_pci_sysfs.c Code handling for PCI sysfs presentation edac_core.h CORE .h include file for 'edac_mc' and 'edac_device' drivers edac_module.h Internal CORE .h include file This forms a foundation upon which a later patch can create the 'edac_device' class of object code in a new file 'edac_device.c'. Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: add RDDR2 memory typesDouglas Thompson2007-07-19
| | | | | | | | Add Registered RDDR2 memory types for displaying DDR2 memories Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: core: make functions staticAdrian Bunk2007-07-19
| | | | | | | | | This patch makes needlessly global code static, in the edac core Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Doug Thompson <norsk5@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/edac: add edac_mc_find APIDouglas Thompson2007-07-19
| | | | | | | | | | | | This simple patch adds an important CORE API for EDAC that EDAC drivers can use to find their edac_mc control structure by passing a mem_ctl_info 'instance' value Needed for subsequent patches Signed-off-by: Douglas Thompson <dougthompson@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the block driverRusty Russell2007-07-19
| | | | | | | | | | | | Lguest block driver A simple block driver for lguest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the net driverRusty Russell2007-07-19
| | | | | | | | | | | | | | Lguest net driver A simple net driver for lguest. [akpm@linux-foundation.org: include fix] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jeff Garzik <jeff@garzik.org> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the console driverRusty Russell2007-07-19
| | | | | | | | | A simple console driver for lguest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the Makefile and KconfigRusty Russell2007-07-19
| | | | | | | | | | This is the Kconfig and Makefile to allow lguest to actually be compiled. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the host codeRusty Russell2007-07-19
| | | | | | | | | | | | | | | | This is the code for the "lg.ko" module, which allows lguest guests to be launched. [akpm@linux-foundation.org: update for futex-new-private-futexes] [akpm@linux-foundation.org: build fix] [jmorris@namei.org: lguest: use hrtimers] [akpm@linux-foundation.org: x86_64 build fix] Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* lguest: the guest codeRusty Russell2007-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | lguest is a simple hypervisor for Linux on Linux. Unlike kvm it doesn't need VT/SVM hardware. Unlike Xen it's simply "modprobe and go". Unlike both, it's 5000 lines and self-contained. Performance is ok, but not great (-30% on kernel compile). But given its hackability, I expect this to improve, along with the paravirt_ops code which it supplies a complete example for. There's also a 64-bit version being worked on and other craziness. But most of all, lguest is awesome fun! Too much of the kernel is a big ball of hair. lguest is simple enough to dive into and hack, plus has some warts which scream "fork me!". This patch: This is the code and headers required to make an i386 kernel an lguest guest. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* RTC: add periodic irq support to rtc-cmosAlessandro Zummo2007-07-19
| | | | | | | | | | Adds support for periodic irq enabling in rtc-cmos. This could be used by the ALSA driver and is already being tested with the zaptel ztdummy module. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* isdn/sc: compile breakage re check_reset()Alexey Dobriyan2007-07-19
| | | | | | | | | | | | | | | | | | | | | There is check_reset() -- global function in drivers/isdn/sc/ There is check_reset -- variable holding module param in aacraid driver. On allyesconfig they clash with: LD drivers/built-in.o drivers/isdn/built-in.o: In function `check_reset': : multiple definition of `check_reset' drivers/scsi/built-in.o:(.data+0xe458): first defined here ld: Warning: size of symbol `check_reset' changed from 4 in drivers/scsi/built-in.o to 219 in drivers/isdn/built-in.o ld: Warning: type of symbol `check_reset' changed from 1 to 2 in drivers/isdn/built-in.o Rename the former. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2007-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mbcs: Remove lots of global symbolsAlan Cox2007-07-19
| | | | | | | | | | | | | MBCS has a collection of things that searches say are not used elsewhere and could be static. If this is the case they should be static, if not then someone at SGI should rename things like "soft_list" so they don't pollute the global namespace with generic names... Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bruce Losure <blosure@sgi.com> Cc: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* unregister_chrdev(): ignore the return valueAkinobu Mita2007-07-19
| | | | | | | | | | | unregister_chrdev() always returns 0. There is no need to check the return value. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Introduce pm_power_off_prepareRafael J. Wysocki2007-07-19
| | | | | | | | | | | | | | | Introduce the pm_power_off_prepare() callback that can be registered by the interested platforms in analogy with pm_idle() and pm_power_off(), used for preparing the system to power off (needed by ACPI). This allows us to drop acpi_sysclass and device_acpi that are only defined in order to register the ACPI power off preparation callback, which is needed by pm_power_off() registered in a much different way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ACPI: Do not prepare for hibernation in acpi_shutdownRafael J. Wysocki2007-07-19
| | | | | | | | | | | | | Since we are now explicitly calling hibernation_ops->prepare() before hibernation_ops->enter() in hibernation_platform_enter() (defined in kernel/power/disk.c), ACPI should not call acpi_sleep_prepare(ACPI_STATE_S4) from acpi_shutdown(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* swsusp: introduce restore platform operationsRafael J. Wysocki2007-07-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At least on some machines it is necessary to prepare the ACPI firmware for the restoration of the system memory state from the hibernation image if the "platform" mode of hibernation has been used. Namely, in that cases we need to disable the GPEs before replacing the "boot" kernel with the "frozen" kernel (cf. http://bugzilla.kernel.org/show_bug.cgi?id=7887). After the restore they will be re-enabled by hibernation_ops->finish(), but if the restore fails, they have to be re-enabled by the restore code explicitly. For this purpose we can introduce two additional hibernation operations, called pre_restore() and restore_cleanup() and call them from the restore code path. Still, they should be called if the "platform" mode of hibernation has been used, so we need to pass the information about the hibernation mode from the "frozen" kernel to the "boot" kernel in the image header. Apparently, we can't drop the disabling of GPEs before the restore because of Bug #7887 .  We also can't do it unconditionally, because the GPEs wouldn't have been enabled after a successful restore if the suspend had been done in the 'shutdown' or 'reboot' mode. In principle we could (and probably should) unconditionally disable the GPEs before each snapshot creation *and* before the restore, but then we'd have to unconditionally enable them after the snapshot creation as well as after the restore (or restore failure)   Still, for this purpose we'd need to modify acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to introduce some mechanism synchronizing the disablind/enabling of the GPEs with the device drivers' .suspend()/.resume() routines and with disable_/enable_nonboot_cpus().  However, this would have affected the suspend (ie. s2ram) code as well as the hibernation, which I'd like to avoid in this patch series. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PM: Do not require dev spew to get PM_DEBUGBen Collins2007-07-19
| | | | | | | | | | | | | | | | In order to enable things like PM_TRACE, you're required to enable PM_DEBUG, which sends a large spew of messages on boot, and often times can overflow dmesg buffer. Create new PM_VERBOSE and shift that to be the option that enables drivers/base/power's messages. Signed-off-by: Ben Collins <bcollins@ubuntu.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'isdn-fix' of ↵Linus Torvalds2007-07-18
|\ | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'isdn-fix' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: ISDN HiSax: uninitialized return in hisax_cs_setup
| * ISDN HiSax: uninitialized return in hisax_cs_setupFlorin Malita2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Coverity (1792) spotted a possibly uninitialized return value in case of kmalloc() failure: 1116 static int hisax_cs_setup(int cardnr, struct IsdnCard *card, 1117 struct IsdnCardState *cs) 1119 int ret; 1120 1121 if (!(cs->rcvbuf = kmalloc(MAX_DFRAME_LEN_L1, GFP_ATOMIC))) { 1122 printk(KERN_WARNING "HiSax: No memory for isac rcvbuf\n"); 1123 ll_unload(cs); 1124 goto outf_cs; ... 1165 outf_cs: 1166 kfree(cs); 1167 card->cs = NULL; 1168 return ret; The straightforward solution would be to just add the missing initialization but hardcoding the return value in the out_cs branch (only taken on failure) seems to work just as well and it allows killing a couple of other lines too. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-07-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: eHEA: Fix bonding support Blackfin ethernet driver: on chip ethernet MAC controller driver fix wrong argument of tc35815_read_plat_dev_addr() ARM/ETHER3: Handle multicast frames. SAA9730: Handle multicast frames. NI5010: Handle multicast frames. NS83820: Handle multicast frames. Fix RGMII-ID handling in gianfar Fix Vitesse RGMII-ID support Add phy-connection-type to gianfar nodes Fix Vitesse 824x PHY interrupt acking [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54 [PATCH] zd1211rw: Add ID for Planex GW-US54GXS [PATCH] Update version ipw2200 stamp to 1.2.2 [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQ [PATCH] Fix ipw2200 set wrong power parameter causing firmware error [PATCH] ipw2100: Fix `iwpriv set_power` error [PATCH] softmac: Channel is listed twice in scan output
| * | eHEA: Fix bonding supportThomas Klein2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver didn't allow an interface's MAC address to be modified if the respective interface wasn't setup - a failing Hcall was the result. Thus bonding wasn't usable. The fix moves the failing Hcall which was registering a MAC address for the reception of BC packets in firmware from the port up and down functions to the port resources setup functions. Additionally the missing update of the last_rx member of the netdev structure was added. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | Blackfin ethernet driver: on chip ethernet MAC controller driverBryan Wu2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the driver necessary use the Analog Devices Blackfin processor's on-chip ethernet MAC controller. [try#2] - add timeout control - kill dma_config_reg bitfields - some trivial cleanup [try#3] - add endianess check - add DRV_NAME, DRV_VERSION... driver information string - add some comments for silicon anomaly and dma API confusion - some code trivial cleanup [try#4] - add Blackfin latest GPIO pin mux opertion with Michael Hennerich's help and Dan's review - rewrite the DMA descriptor list operation in a more readable way by Joe's review [try#5] - cleanup some coding style by Joe's review. [try#6] - 1.1 version fix a bug when set up multicast list pointed by Mr. yoshfuji - rearrange the desc_list_free function. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Cc: Michael Buesch <mb@bu3sch.de> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dan Williams <dcbw@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | fix wrong argument of tc35815_read_plat_dev_addr()Yoichi Yuasa2007-07-18
| | | | | | | | | | | | | | | | | | | | | Fix wrong argument of tc35815_read_plat_dev_addr() Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | Merge branch 'upstream-jgarzik' of ↵Jeff Garzik2007-07-18
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
| | * | [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54Daniel Drake2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested by David Santinoli zd1211b chip 129b:1667 v4810 high 00-01-e3 AL2230S_RF pa0 ---N- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | [PATCH] zd1211rw: Add ID for Planex GW-US54GXSMasakazu Mokuno2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ID for Planex GW-US54GXS USB wireless adapter sold in Japan. Since this device returns the regulatory region as 0x49, the patch 'Allow channels 1-11 for unrecognised regulatory domains' is required. Tested by Masakazu Mokuno zd1211b chip 2019:5303 v4810 high 00-90-cc AL2230_RF pa0 ---N- Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | [PATCH] Update version ipw2200 stamp to 1.2.2Zhu Yi2007-07-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQZhu Yi2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom De Man <Tom.DeMan@DZINE.BE> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | [PATCH] Fix ipw2200 set wrong power parameter causing firmware errorZhu Yi2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power mode can only be set 0~5 to firmware. Otherwise there will be a firmware error generated. This patch fixed the invalid power mode requested by driver. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | [PATCH] ipw2100: Fix `iwpriv set_power` errorZhu Yi2007-07-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iwpriv <iface> set_power [0~6] can be used for ipw2100. '0' indicates off and '6' indicates auto. 1~5 are the actual power levels. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | ARM/ETHER3: Handle multicast frames.YOSHIFUJI Hideaki / 吉藤英明2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | SAA9730: Handle multicast frames.YOSHIFUJI Hideaki / 吉藤英明2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | NI5010: Handle multicast frames.YOSHIFUJI Hideaki / 吉藤英明2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | NS83820: Handle multicast frames.YOSHIFUJI Hideaki / 吉藤英明2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> -- Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | Fix RGMII-ID handling in gianfarAndy Fleming2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TSEC/eTSEC can detect the interface to the PHY automatically, but it isn't able to detect whether the RGMII connection needs internal delay. So we need to detect that change in the device tree, propagate it to the platform data, and then check it if we're in RGMII. This fixes a bug on the 8641D HPCN board where the Vitesse PHY doesn't use the delay for RGMII. Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | Fix Vitesse RGMII-ID supportAndy Fleming2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Vitesse PHY on the 8641D needs to be set up with internal delay to work in RGMII mode. So we add skew when it is set to RGMII_ID mode. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Haruki Dai <Dai.Haruki@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| * | | Fix Vitesse 824x PHY interrupt ackingAndy Fleming2007-07-18
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Vitesse 824x PHY doesn't allow an interrupt to be cleared if the mask bit for that interrupt isn't set. This means that the PHY Lib's order of handling interrupts (disable, then clear) breaks on this PHY. However, clearing then disabling the interrupt opens up the code for a silly race condition. So rather than change the PHY Lib, we change the Vitesse driver so it always clears interrupts before disabling them. Further, the ack function only clears the interrupt if interrupts are enabled. Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Acked-by: Haiying Wang <Haiying.Wang@freescale.com>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds2007-07-18
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: sysfs: cosmetic clean up on node creation failure paths sysfs: kill an extra put in sysfs_create_link() failure path Driver core: check return code of sysfs_create_link() HOWTO: Add the knwon_regression URI to the documentation dev_vdbg() documentation dev_vdbg(), available with -DVERBOSE_DEBUG sysfs: make sysfs_init_inode() static sysfs: fix sysfs root inode nlink accounting Documentation fix devres.txt: lib/iomap.c -> lib/devres.c sysfs: avoid kmem_cache_free(NULL) PM: remove deprecated dpm_runtime_* routines PM: Remove deprecated sysfs files Driver core: accept all valid action-strings in uevent-trigger debugfs: remove rmdir() non-empty complaint
| * | | Driver core: check return code of sysfs_create_link()Cornelia Huck2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for return value of sysfs_create_link() in device_add() and device_rename(). Add helper functions device_add_class_symlinks() and device_remove_class_symlinks() to make the code easier to read. [akpm@linux-foundation.org: fix unused var warnings] Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | dev_vdbg(), available with -DVERBOSE_DEBUGDavid Brownell2007-07-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG. When enabled, dev_vdbg() acts just like dev_dbg(). When disabled, it is a NOP ... just like dev_dbg() without -DDEBUG. The specific code was moved out of a USB patch, but lots of drivers have similar support. That is, code can now be written to use an additional level of debug output, selected at compile time. Many driver authors have found this idiom to be very useful. A typical usage model is for "normal" debug messages to focus on fault paths and not be very "chatty", so that those messages can be left on during normal operation without much of a performance or syslog load. On the other hand "verbose" messages would be noisy enough that they wouldn't normally be enabled; they might even affect timings enough to change system or driver behavior. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-10 08:54:06 -0500