aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* stmmac: fix Transmit FIFO flush operationGiuseppe CAVALLARO2010-04-14
| | | | | | | | Fix the Transmit FIFO flush operation; it was disabled while reworking the descriptor structures. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* stmmac: rework normal and enhanced descriptorsGiuseppe CAVALLARO2010-04-14
| | | | | | | | | | | | Currently the driver assumes that the mac10/100 can only use the normal descriptor structure and the gmac can only use the enhanced structures. This patch removes the descriptor's code from the dma files and adds two new files just for handling the normal and enhanced descriptors. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* stmmac: split core and dma for the mac10/100Giuseppe CAVALLARO2010-04-14
| | | | | | | | | The patch splits core and dma parts for the mac10/100 device. This was already done for the GMAC device. It should make more flexible the driver to support other chips. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: clarify promiscuous cmd with a commentSathya Perla2010-04-13
| | | | | | | | | The promiscous cmd config code gives an impression that setting a port to promisc mode will unset the other port. This is not the case and is clarified with a comment. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: last_rx eliminationEric Dumazet2010-04-13
| | | | | | | | Network drivers do not have to update last_rx, unless they need it for their private use. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix some #includes in CAN drivers (rebased for net-next-2.6)Hans J. Koch2010-04-13
| | | | | | | | | | | | In the current implementation, CAN drivers need to #include <linux/can.h> _before_ they #include <linux/can/dev.h>, which is both ugly and unnecessary. Fix this by including <linux/can.h> in <linux/can/dev.h> and remove the #include <linux/can.h> lines from drivers. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* bcm63xx_enet: do not overwrite ENET_CTL_REG valueFlorian Fainelli2010-04-13
| | | | | | | | | | | | | | | | | bcm_enet_hw_preinit will correctly set values in ENET_CTL_REG for internal or external MII operations, however, bcm_enet_open will blindly overwrite the ENET_CTL_REG register value and thus we will loose any changes to it that were made in bcm_enet_hw_preinit, rendering external MII operations non-working. This would lead to the driver not being able to check for link availability on external PHY setups, and thus we would never get to sending packets because link was down from the driver side. This was completely un-noticed because all boards out there but BCM6338-based ones use internal phy on their enet0 interface. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* PHY: fix typo in bcm63xx PHY driver tableFlorian Fainelli2010-04-13
| | | | | Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* chelsio: Fix build warning.David S. Miller2010-04-13
| | | | | | | | | | | GCC warns that: drivers/net/chelsio/sge.c:463:11: warning: operation on 's->port' may be undefined Better to eliminate the side effects in the calculation and express what was intended here. Signed-off-by: David S. Miller <davem@davemloft.net>
* e1000e: use static params to save stack spaceJesse Brandeburg2010-04-13
| | | | | | | | | | | | | | | used a modified checkstack to get the 56 number (normally checkstack wouldn't show this low a value) checkstack before: 0x0000012f e1000e_check_options [e1000e]: 272 after: 0x0000012f e1000e_check_options [e1000e]: 56 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* igb: modify register test for i350 to reflect read only bits in RDLEN/TDLENAlexander Duyck2010-04-13
| | | | | | | | | | The registers for RDLEN/TDLEN on i350 have the first 7 bits as read only. This is a change from previous hardware in which it was only the first 4 bits that were read only. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* myri10ge: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* chelsio: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qla3xxx: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2010-04-13
| | | | | | | | | | | | | | | | This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Update version to 3.110Matt Carlson2010-04-13
| | | | | | | | This patch updates the tg3 version to 3.110. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Remove function errors flagged by checkpatchMatt Carlson2010-04-13
| | | | | | | | | | | This patch removes the following checkpatch errors: * return is not a function, parentheses are not required * space prohibited between function name and open parenthesis '(' Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Unify max pkt size preprocessor constantsMatt Carlson2010-04-13
| | | | | | | | | | | The maximum packet size that gets programmed into the standard producer ring control block is directly related to the packet size used to allocate packet buffers. This patch removes the redundant preprocessor constant. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Re-inline VLAN tags when appropriateMatt Carlson2010-04-13
| | | | | | | | | | | | | | The tg3 driver is written so that VLAN tagged packets can be accepted, even if CONFIG_VLAN_8021Q or CONFIG_VLAN_8021Q_MODULE is not defined. (Think raw interfaces.) If the device has ASF support enabled, the firmware requires the driver to enable VLAN tag stripping. If VLAN tagging is not explicitly supported by the kernel and ASF is enabled, the driver will have to reinject the VLAN tag back into the packet stream. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Optimize rx double copy testMatt Carlson2010-04-13
| | | | | | | | | | | | | | | | | On a PCIX bus, the 5701 has a bug which requires the driver to double copy all rx packets. The rx code uses the rx_offset device member as a flag to determine if this workaround should take effect. The following patch will modify the rx_offset member such that this test will become less clear. The patch starts by integrating the workaround check into the packet length check. It rounds out the implementation by relaxing the workaround restrictions if the platform has efficient unaligned accesses. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Reduce 57765 core clock when link at 10MbpsMatt Carlson2010-04-13
| | | | | | | | | | This patch reduces the core clock to 6.25MHz when operating at 10Mbps link speed. This is needed to prevent a bug that will ultimately cause transmits to cease. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Set card 57765 card reader MRRS to 1024BMatt Carlson2010-04-13
| | | | | | | | | This patch sets the Maximum Read Request Size for the card reader function to 1024 bytes to prevent an SD controller lockup. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Disable CLKREQ in L2Matt Carlson2010-04-13
| | | | | | | | This patch disables CLKREQ in L2 to workaround a chipset bug. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add hardware TX timestamping supportManfred Rudigier2010-04-13
| | | | | | | | | | | | | | | If a packet has the skb_shared_tx->hardware flag set the device is instructed to generate a TX timestamp and write it back to memory after the frame is transmitted. During the clean_tx_ring operation the timestamp will be extracted and copied into the skb_shared_hwtstamps struct of the skb. TX timestamping is enabled by setting the tx_type to something else than HWTSTAMP_TX_OFF with the SIOCSHWTSTAMP ioctl command. It is only supported by eTSEC devices. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: Add hardware RX timestamping supportManfred Rudigier2010-04-13
| | | | | | | | | | | | | | | The device is configured to insert hardware timestamps into all received packets. The RX timestamps are extracted from the padding alingment bytes during the clean_rx_ring operation and copied into the skb_shared_hwtstamps struct of the skb. This extraction only happens if the rx_filter was set to something else than HWTSTAMP_FILTER_NONE with the SIOCSHWTSTAMP ioctl command. Hardware timestamping is only supported for eTSEC devices. To indicate device support the new FSL_GIANFAR_DEV_HAS_TIMER flag was introduced. Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
* Add non-Virtex5 support for LL TEMAC driverJohn Linn2010-04-13
| | | | | | | | | | | | | | | | This patch adds support for using the LL TEMAC Ethernet driver on non-Virtex 5 platforms by adding support for accessing the Soft DMA registers as if they were memory mapped instead of solely through the DCR's (available on the Virtex 5). The patch also updates the driver so that it runs on the MicroBlaze. The changes were tested on the PowerPC 440, PowerPC 405, and the MicroBlaze platforms. Signed-off-by: John Tyner <jtyner@cs.ucr.edu> Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ll_temac: remove virt_to_bus callJohn Linn2010-04-13
| | | | | | | | | | | The virt_to_bus call should not be used any longer as it's considered illegal. The driver has the physical address of the buffer in the descriptor such that it's not necessary anyway. Signed-off-by: John Linn <john.linn@xilinx.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* r6040: use (dev|netdev)_<level> macros helpersFlorian Fainelli2010-04-13
| | | | | Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* can: Add esd board support to plx_pci CAN driverMatthias Fuchs2010-04-13
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for SJA1000 based PCI CAN interface cards from electronic system design gmbh. Some changes have been done on the common code: - esd boards must not have the 2nd local interupt enabled (PLX9030/9050) - a new path for PLX9056/PEX8311 chips has been added - new plx9056 reset function has been implemented - struct plx_card_info got a reset function entry In detail the following additional boards are now supported: CAN-PCI/200 (PCI) CAN-PCI/266 (PCI) CAN-PMC266 (PMC module) CAN-PCIe/2000 (PCI Express) CAN-CPCI/200 (Compact PCI, 3U) CAN-PCI104 (PCI104) Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2010-04-11
|\ | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2010-04-11
| |\
| | * Merge branch 'for-linus' of ↵Linus Torvalds2010-04-09
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check correct variable for allocation failure RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp() RDMA/cm: Set num_paths when manually assigning path records IB/cm: Fix device_create() return value check
| | | *---. Merge branches 'cma', 'misc', 'mlx4' and 'nes' into for-linusRoland Dreier2010-04-09
| | | |\ \ \
| | | | | | * RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp()Chien Tung2010-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cap.max_inline_data is incorrectly set in init_attr instead of attr. Set it in attr so subsequent init_attr.cap assignment will get the correct value. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | | | | * | IB/mlx4: Check correct variable for allocation failureDan Carpenter2010-04-07
| | | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The intent here is to check the "mfrpl->mapped_page_list" allocation. We checked "mfrpl->ibfrpl.page_list" earlier. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | | | * / IB/cm: Fix device_create() return value checkJani Nikula2010-03-31
| | | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use IS_ERR() instead of comparing to NULL. Signed-off-by: Jani Nikula <ext-jani.1.nikula@nokia.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | | * / RDMA/cm: Set num_paths when manually assigning path recordsSean Hefty2010-04-07
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When manually assigning the path records to use for a connection, save the number of paths that were set. Otherwise, checks against num_path will show 0, even though path record data is available. This was discovered by manually setting the path records from user space, then querying the kernel to see if the correct path records were assigned, only to discover that the kernel returned 0 path records to the query. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-04-09
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] Update default configuration. [S390] nss: add missing .previous statement to asm function [S390] increase default size of vmalloc area [S390] s390: disable change bit override [S390] fix io_return critical section cleanup [S390] sclp_async: potential buffer overflow [S390] arch/s390/kernel: Add missing unlock
| | | * | [S390] sclp_async: potential buffer overflowDan Carpenter2010-04-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "len" hasn't been properly range checked so we shouldn't use it as an array offset. This can only be written to by root but it would still be annoying to accidentally write more than 3 characters and corrupt your memory. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| | * | | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-04-09
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
| | | * | | loop: Update mtime when writing using aopsNikanth Karthikesan2010-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update mtime when writing to backing filesystem using the address space operations write_begin and write_end. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | drbd: lc_element_by_index() never returns NULLPhilipp Reisner2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | cciss: unlock on error pathDan Carpenter2010-04-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We take the spin_lock again in fail_all_cmds() so we need to unlock here. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | Merge branch 'master' into for-linusJens Axboe2010-03-19
| | | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: block/Kconfig Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | | Remove GENHD_FL_DRIVERFSNeilBrown2010-03-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This flag is not used, so best discarded. Signed-off-by: NeilBrown <neilb@suse.de> -- Hi Jens, I came across this recently - these are the only two occurances of "GENHD_FL_DRIVERFS" in the kernel, so it cannot be needed. NeilBrown Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | | block: Finalize conversion of block limits functionsMartin K. Petersen2010-03-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove compatibility wrappers and update remaining drivers. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | | paride: fix off-by-one testRoel Kluin2010-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With `while (j++ < PX_SPIN)' j reaches PX_SPIN + 1 after the loop. This is probably unlikely to produce a problem. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| | | * | | | drbd: fix al-to-on-disk-bitmap for 4k logical_block_sizeLars Ellenberg2010-03-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Up to now, applying the in-core activity-log to the on-disk bitmap did not care for logical_block_size. On logical_block_size != 512 byte, this very likely results in misalligned block access and spurious "io errors". We now simply always submit aligned whole 4k blocks, fixing this for logical block sizes of 512, 1024, 2048 and 4096. For even larger logical block sizes, this won't work. But I'm not aware of devices with such properties being available. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-13 12:12:42 -0400