aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
...
| * | | | | | | ctc: make use of alloc_netdev()Peter Tiedemann2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ctc-device initialization is broken (kernel bug in ctc_new_device). The new network namespace code reveals a deficiency of the ctc driver. It should make use of alloc_netdev() as described in Documentation/networking/netdevices.txt. Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | S2io: Fixed the case when the card initialization fails on mtu changeSreenivasa Honnur2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the case when the card initialization fails on a mtu change and then close is called (due to ifdown), which frees non existent rx buffers. - Returning appropriate error codes in init_nic function. - In s2io_close function s2io_card_down is called only when device is up. - In s2io_change_mtu function return value of s2io_card_up function is checked and returned if it failed. Signed-off-by: Surjit Reang <surjit.reang@neterion.com> Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | Merge branch 'fixes-jgarzik' of ↵Jeff Garzik2007-12-01
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
| | * | | | | | | iwlwifi 4965 Fix race conditional panic.Joonwoo Park2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | iwlwifi 3945 Fix race conditional panic.Joonwoo Park2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joonwoo Park <joonwpark81@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | iwlwifi: fix iwl_mac_add_interface handlerTomas Winkler2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes iwl_mac_add_interface. 1. Currently only one interface is supported, instead of silently retuning 0 now it returns -EOPNOTSUPP (By Johannes Berg) 2. It enables changing mac address from user space (By Ian Schram) Signed-off-by: Tomas Winkler <tomas@localhost.localdomain> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: linux-wireless <linux-wireless@vger.kernel.org Cc: Ian Schram <ischram@telenet.be> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | libertas: let more than one MAC event throughHolger Schurig2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lbs_mac_event_disconnected() was called once and then never again upon a hardware MAC event. The reason was that the driver didn't clean the correct bit in the interrupt cause register of the chip. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | libertas: Don't set NETIF_F_IPV6_CSUM in dev->featuresDavid Woodhouse2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not sure why it was doing this, and I'm not sure I _want_ to know why. But calling it NETIF_F_DYNALLOC doesn't change the fact that the kernel believes it to be NETIF_F_IPV6_CSUM, and that IPv6 communication is hence buggered. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | drivers/net/wireless: Add missing "space"Joe Perches2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | b43/b43legacy: fix left-over URLs and ifdefsStefano Brivio2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some left-over URLs and ifdefs in b43 and b43legacy drivers. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | | iwlwifi: fix possible NULL dereference in iwl_set_rate()Saleem Abdulrasool2007-11-29
| | | |_|_|_|/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Saleem Abdulrasool <compnerd@compnerd.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | | | | | Merge branch 'master' into upstream-fixesJeff Garzik2007-12-01
| |\ \ \ \ \ \ \ | | | |_|_|/ / / | | |/| | | | |
| * | | | | | | dmfe: checkpatch fix (add whitespace)Jeff Garzik2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | | | | | Blackfin EMAC driver: fix bug - NAT doesn't work with bfin_mac driverVitja Makarov2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&thread_id=23114&_forum_action=ForumMessageBrowse Today I was dealing with the same problem, on my custom bf537 board, and bfin_mac driver. I found that the problem is in setting ip_summed flag of skbuff structure, Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | Blackfin SMC91x Driver: punt CONFIG_BFIN -- we already have CONFIG_BLACKFINMike Frysinger2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | NET: dmfe: don't access configuration space in D3 stateMaxim Levitsky2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Accidently I reversed the order of pci_save_state and pci_set_power_state in .suspend()/.resume() callbacks Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | smc911x: Fix multicast handlingPeter Korsgaard2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smc911x_set_multicast_list fails to fill out the multicast hash table correctly; Bit 1 was used rather than bit 5 to decide if the lower or upper register should be used. The function is at the same time cleaned up by calling ether_crc rather than using it's own bit reversal table. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | sky2: disable rx checksum on Yukon XLStephen Hemminger2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell Yukon XL chipset appears to have a hardware glitch where it will repeat the checksum of the last packet. Of course, this is timing sensitive and only happens sometimes... More info: http://bugzilla.kernel.org/show_bug.cgi?id=9381 As a workaround just disable hardware checksumming by default on this chip version. The earlier workaround for PCIX, dual port was also on Yukon XL so don't need to disable checksumming there. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | ehea: Reworked rcv queue handling to log only fatal errorsThomas Klein2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent driver from brawly logging packet checksum errors. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | ehea: Improve tx packets countingThomas Klein2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using own tx_packets counter instead of firmware counters. Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | smc911x: Fix unused variable warning.Peter Korsgaard2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smc911x_local pointer in smc911x_rcv is only used in the SMC_USE_DMA case. Move it under the #ifdef so GCC doesn't generate a warning in the non-DMA case. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | smc911x: Fix undefined CONFIG_ symbol warningPeter Korsgaard2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | elif defined(CONFIG_*) should be used instead of elif CONFIG_* so GCC doesn't give warnings about undefined symbols when the config option is disabled. Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | amd8111e: don't call napi_enable if configured w/o NAPIJiri Bohac2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The amd8111e network driver was broken by bea3348eef27e6044b6161fd04c3152215f96411, which makes the driver call napi_enable() and napi_disable() even if the driver had been configured without CONFIG_AMD8111E_NAPI, and thus netif_napi_add() had not been called on initialization. This triggers a BUG in napi_enable(). This patch fixes the problem. Please apply. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | dm9601: Fix printkPeter Korsgaard2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A printk in the error handling code of dm9601.c was missing a newline. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | forcedeth boot delay fixAyaz Abdulla2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a long boot delay in the forcedeth driver. During initialization, the timeout for the handshake between mgmt unit and driver can be very long. The patch reduces the timeout by eliminating a extra loop around the timeout logic. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9308 Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Cc: Alex Howells <astinus@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | forcedeth: new mcp79 pci idsAyaz Abdulla2007-11-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds new device ids and features for mcp79 devices into the forcedeth driver. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | | | | | ibm_newemac: Fix possible lockup on closeBenjamin Herrenschmidt2007-11-23
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a bad idea to call flush_scheduled_work from within a netdev->stop because the linkwatch will occasionally take the rtnl lock from a workqueue context, and thus that can deadlock. This reworks things a bit in that area to avoid the problem. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2007-12-03
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_mv: Fix broken Marvell 7042 support. libata: Fix early use of port printk. (Was Re: ata4294967295: failed to start port (errno=-19)) ata_piix: add more toshiba laptops to broken suspend list libata: More IVB horkage from TSST libata: report protocol and full CDB on error Several fixes for the AVR32 PATA driver sata_mv: fix compilation error when enabling DEBUG Set proper ATA UDMA mode for bf548 according to system clock.
| * | | | | | | sata_mv: Fix broken Marvell 7042 support.Mark Lord2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_mv: Fix broken Marvell 7042 support. The Marvell 7042 chip is more or less the same as the 6042 internally, but sports a PCIe bus. Despite having identical SATA cores, the 7042 does differ from its PCI bus counterparts in placment and layout of certain bus related registers. This patch fixes sata_mv to distinguish between the PCI bus registers of earlier chips, and the PCIe bus registers of the 7042. Specifically, move the offsets and bit patterns for the PCI/PCIe interrupt cause/mask registers into the struct mv_host_priv, as these values differ between the 6xxx and 7xxx series chips. This fixes the driver to not access reserved PCI addresses, and prevents the lockups reported in linux-2.6.24 with 7042 boards. Also add a new PCI ID for the Highpoint 2300 7042-based board that I'm using for testing this stuff here. Tested with Marvell 6081 + 7042 chips, on x86 & x86_64. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | libata: Fix early use of port printk. (Was Re: ata4294967295: failed to ↵Alan Cox2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | start port (errno=-19)) On Fri, 30 Nov 2007 14:34:11 +0200 (EET) Meelis Roos <mroos@linux.ee> wrote: > > Can you stick a stack trace in at that point ? That would help diagnose > > it a great deal quicker. > > Finally done - found out hard way that BUG() is too bad and > dump_st5ack() suits me better. Thanks. This should fix the real cause, and also allow for port start to fail politely with -ENODEV. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | ata_piix: add more toshiba laptops to broken suspend listPeter Schwenke2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add more toshiba laptops to broken suspend list. This is from OSDL bugzilla bug 7780. tj: re-formatted patch and added description and SOB. Signed-off-by: Peter Schwenke <peter@bluetoad.com.au> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | libata: More IVB horkage from TSSTPeter Missel2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | libata: Add more TSST (Samsung/Toshiba) IDE drives with broken cable detection validation bits. signed-off-by: Peter Missel (peter.missel@onlinehome.de) Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | libata: report protocol and full CDB on errorTejun Heo2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Protocol and CDB allocation size field are important in determining what went wrong with ATAPI commands. Report them on failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | Several fixes for the AVR32 PATA driverKristoffer Nyborg Gregertsen2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several fixes for the AVR32 PATA driver: * Updated to use new AVR32 SMC timing API. This removes the need for "magic" constants in signal timing. * Removed the ATA_FLAG_PIO_POLLING, the driver should use interrupts. * Removed .port_disable and .irq_ack as these are no longer needed. * Improved some comments. Signed-off-by: Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | sata_mv: fix compilation error when enabling DEBUGSaeed Bishara2007-12-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | use sstatus instead status. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
| * | | | | | | Set proper ATA UDMA mode for bf548 according to system clock.sonic zhang2007-12-01
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDMA Mode - Frequency compatibility UDMA5 - 100 MB/s - SCLK = 133 MHz UDMA4 - 66 MB/s - SCLK >= 80 MHz UDMA3 - 44.4 MB/s - SCLK >= 50 MHz UDMA2 - 33 MB/s - SCLK >= 40 MHz Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* | | | | | | uml: add !UML dependenciesAl Viro2007-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The previous commit ("uml: keep UML Kconfig in sync with x86") is not enough, unfortunately. If we go that way, we need to add dependencies on !UML for several options. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Dike <jdike@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | I4L: fix isdn_ioctl memory overrun vulnerabilityKarsten Keil2007-12-03
|/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix possible memory overrun issue in the isdn ioctl code. Found by ADLAB <adlab@venustech.com.cn> Signed-off-by: Karsten Keil <kkeil@suse.de> Cc: ADLAB <adlab@venustech.com.cn> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-30
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/ehca: Fix static rate if path faster than link IPoIB: Fix oops if xmit is called when priv->broadcast is NULL
| * | | | | | IB/ehca: Fix static rate if path faster than linkJoachim Fenkes2007-11-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The formula would yield -1 if the path is faster than the link, which is wrong in a bad way (max throttling). Clamp to 0, which is the correct value. Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | | | | | IPoIB: Fix oops if xmit is called when priv->broadcast is NULLJack Morgenstein2007-11-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a port goes down, ipoib_ib_dev_down() is invoked -- which flushes the mcasts (clearing priv->broadcast) and clearing the path record cache. If ipoib_start_xmit() is then invoked (before the broadcast group is rejoined), a kernel oops results from attempting to access priv->broadcast, which is still unset. Returning NULL from path_rec_create() if priv->broadcast is NULL is a harmless way of bypassing the problem -- the offending packet is simply discarded "without prejudice." Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | | | | | Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2007-11-30
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4680/1: parentheses around NR_IRQS definition [ARM] 4679/1: AT91: Change maintainer email address [ARM] 4675/1: pxa: fix mfp address definition error for pxa320 [ARM] 4674/1: pxa: increase LCD PCLK drive strength to fast 2mA for PXA300/PXA310 [ARM] 4673/1: pxa: add missing IRQ_SSP4 definitions for PXA3xx [ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processors [ARM] 4665/1: fix __und_usr wrt accessing the undefined insn in user space [ARM] 4659/1: remove possibilities for spurious false negative with __kuser_cmpxchg [ARM] 4661/1: fix do_undefinstr wrt the enabling of IRQs [ARM] uengine: fix memset size error [ARM] 4648/1: i.MX/MX1 ensure more complete AITC initialization [ARM] 4611/2: AT91: Fix GPIO buttons pins on SAM9261-EK. [ARM] 4650/1: AT91: New-style init of I2C, support for i2c-gpio [ARM] 4604/2: AT91: Master clock divistor on SAM9 [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is disabled [ARM] PXA ssp: unlock when ssp tries to close an invalid port [ARM] 4654/1: pxa: update default MFP register value [ARM] 4653/1: pxa: fix a gpio typo in mfp-pxa320.h [ARM] 4652/1: pxa: fix a typo of pxa27x usb host clk definition [ARM] 4651/1: pxa: add PXA3xx specific IRQ definitions
| * | | | | | | [ARM] 4662/1: Fix PXA serial driver compilation if SERIAL_PXA_CONSOLE is ↵Philipp Zabel2007-11-26
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | disabled Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2007-11-29
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: sdio_uart: fix sign of paramter status in sdio_uart_receive_chars()
| * | | | | | | sdio_uart: fix sign of paramter status in sdio_uart_receive_chars()Andre Haupt2007-11-29
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also fixes a sparse warning about different signedness. Only compile tested, because i do not have the hardware. Signed-off-by: Andre Haupt <andre@bitwigglers.org> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
* | | | | | | ACPI: avoid references to impossible processors.Christoph Lameter2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI uses NR_CPUS in various loops and in some it accesses per cpu data of processors that are not present(!) and that will never be present. The pointers to per cpu data are typically not initialized for processors that are not present. So we seem to be reading something here from offset 0 in memory. Make ACPI use nr_cpu_ids instead. That stops at the end of the possible processors. Convert one loop to NR_CPUS to use the cpu_possible map instead. That way ranges of processor that can never be brought online are skipped during the loop. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | RTC: convert mutex to bitfieldJiri Kosina2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RTC code is using mutex to assure exclusive access to /dev/rtc. This is however wrong usage, as it leaves the mutex locked when returning into userspace, which is unacceptable. Convert rtc->char_lock into bit operation. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | x86_64 EFI boot support: EFI frame buffer driverHuang, Ying2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Graphics Output Protocol support to the kernel. UEFI2.0 spec deprecates Universal Graphics Adapter (UGA) protocol and only Graphics Output Protocol (GOP) is produced. Therefore, the boot loader needs to query the UEFI firmware with appropriate Output Protocol and pass the video information to the kernel. As a result of GOP protocol, an EFI framebuffer driver is needed for displaying console messages. The patch adds a EFI framebuffer driver. The EFI frame buffer driver in this patch is based on the Intel Mac framebuffer driver. The ELILO bootloader takes care of passing the video information as appropriate for EFI firmware. The framebuffer driver has been tested in i386 kernel and x86_64 kernel on EFI platform. Signed-off-by: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | revert "keyspan: init termios properly"Andrew Morton2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert 7eea436433b7b18045f272562e256976f593f7c0. Lucy said: This patch will work with the 19HS but WILL BREAK all other Keyspan adapters. It will take me a few days to get to looking at a correct fix but that keyspan_send_setup(port, 1) (and the '1' is the important part) must happen once when the port is first opened. The cflag can just be set to whatever the normal default is for your serial environment. So revert this again pending the proper fix. Cc: Borislav Petkov <bbpetkov@yahoo.de> Cc: Greg KH <greg@kroah.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Lucy McCoy <lucy@keyspan.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | imacfb: remove reference to otherwise-unused, non-existent ↵Andrew Morton2007-11-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | screen_info.imacpm_seg Cc: Edgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-19 22:37:46 -0400