aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* korina: do tx at the right positionPhil Sutter2009-01-15
| | | | | | | | | | | | | Triggering TX before the write to the DMA status mask register leads to transferring packets with maximum payload no matter what the actual packet size is. While here, also trigger RX scheduling after writing the DMA status mask register, like it was in the original driver before it was sent upstream. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: do schedule napi after testing for itPhil Sutter2009-01-15
| | | | | | | | | | | The called netif_rx_schedule() does all the work for us: - it checks the return value of netif_rx_schedule_prep() and - if everything is ok calls __netif_rx_schedule(). Before this change, the driver received absolutely nothing. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: rework korina_rx() for use with napiPhil Sutter2009-01-15
| | | | | | | | | | This function needs an early exit condition to function properly, or else caller assumes napi workload wasn't enough to handle all received packets and korina_rx is called again (and again and again and ...). Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: disable napi on close and restartPhil Sutter2009-01-15
| | | | | | | | Without this the driver will crash when the NIC is being restarted. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: reset resource buffer size to 1536Phil Sutter2009-01-15
| | | | | | | | | | | | The new value is the one used in the external patch before and allows at least a standard MTU of 1500 to be handled correctly. Impact of this change gets visible when bigger packets are to be received, issuing: | ping -s 492 <IP> and bigger payload sized led to 100% packet loss. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org Signed-off-by: David S. Miller <davem@davemloft.net>
* korina: fix usage of driver_dataPhil Sutter2009-01-15
| | | | | | | | | | Using platform_set_drvdata() here makes no sense, since the driver_data field has already been filled with valuable data (i.e. the MAC address). Also having driver_data point to the net_device is rather pointless since struct korina_device contains an apropriate field for it. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: First slow path interrupt raceEilon Greenstein2009-01-15
| | | | | | | | The "read for interrupts" flag must be set before enabling slow-path interrupts as well (and not just before fast-path interrupts) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: MTU FilterEilon Greenstein2009-01-15
| | | | | | | Too big packets could pass due to wrong filter size Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Indirection table initialization indexEilon Greenstein2009-01-15
| | | | | | | | Wrong initialization of the multi-queue indirection table - it should be using the function and not the port index Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Missing bracketsEilon Greenstein2009-01-15
| | | | | | | Calculation bug due to missing brackets Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Fixing the doorbell sizeEilon Greenstein2009-01-15
| | | | | | | | The size of the doorbell is 4KB, this bug become visible when using more than 8 queues Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Endianness issuesEilon Greenstein2009-01-15
| | | | | | | | Adding missing le_to_cpu and disabling wrong HW endianity flag (the two complete each other) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: VLAN tagged packets without VLAN offloadEilon Greenstein2009-01-15
| | | | | | | | Wrong handling of tagged packet if VLAN offload is disabled caused packets to get corrupted Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Protecting the link change indicationEilon Greenstein2009-01-15
| | | | | | | | Without this lock, in some race conditions the driver missed link change indication Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Flow control updated before reporting the linkEilon Greenstein2009-01-15
| | | | | Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Missing mask when calculating flow controlEilon Greenstein2009-01-15
| | | | | Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Using system page size for SGEEilon Greenstein2009-01-15
| | | | | | | | | | | | When the page size is not 4KB, the FW must be programmed to work with the right SGE boundaries and fragment list length. To avoid confusion with the BCM_PAGE_SIZE which is set to 4KB for the FW sake, another alias for the system page size was added to explicitly indicate that it is meant for the SGE Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Missing memory barriersEilon Greenstein2009-01-15
| | | | | | | | While working on IA64, it became clear that the following memory barriers are missing Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: Using singlethread work queueEilon Greenstein2009-01-15
| | | | | | | | | | | | | Since slow-path events, including link update, are handled in work-queue, a race condition was introduced in the self-test that sometimes caused the link status to fail: the self-test was running under RTNL lock, and if the link-watch was scheduled it stoped the shared work-queue (waiting for the RTNL lock) and so the link update event was not handled until the self-test ended (releasing the RTNL lock) with failure (since the link status was not updated) Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ax88796: start_xmit fix using net_device_opsMagnus Damm2009-01-15
| | | | | | | | | | | | | This patch hooks up the start_xmit/tx_timeout/get_stats callbacks in the ax88796 driver since they no longer are installed by the lib8390 code. Without this patch the function dev_hard_start_xmit() crashes due to a start_xmit callback with the value NULL. While at it, update the ax88796 driver to make use of use of struct net_device_ops. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Add init_dummy_netdev() and fix EMAC driver using itBenjamin Herrenschmidt2009-01-15
| | | | | | | | | | | | | | | | | | | This adds an init_dummy_netdev() function that gets a network device structure (allocation and lifetime entirely under caller's control) and initialize the minimum amount of fields so it can be used to schedule NAPI polls without registering a full blown interface. This is to be used by drivers that need to tie several hardware interfaces to a single NAPI poll scheduler due to HW limitations. It also updates the ibm_newemac driver to use that, this fixing the oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add() Symbol is exported GPL only a I don't think we want binary drivers doing that sort of acrobatics (if we want them at all). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/irda/irda-usb.c: fix buffer overflowJos-Vicente Gilabert2009-01-14
| | | | | | | | | | | Taken from http://bugzilla.kernel.org/show_bug.cgi?id=12397 We're doing an sprintf of an 11-char string into an 11-char buffer. Whoops. It breaks firmware uploading. Reported-by: Jos-Vicente Gilabert <josevteg@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: handle dma mapping failuresDhananjay Phadke2009-01-14
| | | | | | | | o Bail out if pci_map_single() fails while replenishing rx ring. o Drop packet if pci_map_{single,page}() fail in tx. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: hold tx lock while sending firmware commandsDhananjay Phadke2009-01-14
| | | | | | | | | Some firmware commands like mac address addition/deletion are sent on the transmit ring. So need to hold the tx lock before touching tx producer/consumer indices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: cleanup mac list on driver unloadDhananjay Phadke2009-01-14
| | | | | | | | | This fixes a tiny memory leak when driver is unloaded. The mac address list maintained in netxen_adapter needs to deleted when driver is going down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: firmware init fixDhananjay Phadke2009-01-14
| | | | | | | | | | | | | o Fix order or rom register writes. o Reduce udelays when writing rom registers. This cuts the firmware init time by 40%. o Do not reset core/memory clocks when reinitializing driver. Firmware willl handle this when initialized. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix link speed reporting for some boardsDhananjay Phadke2009-01-14
| | | | | | | | | o Read negotiated link speed when link state changes. o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and 10Gbps ports. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix ipv6 offload and tx cleanupDhananjay Phadke2009-01-14
| | | | | | | | | | o fix the ip/tcp hdr offset in tx descriptors for ipv6. o cleanup xmit function, move the tso checks into separate function, this reduces unnecessary endian conversions back and forth. o optimize macros to initialize tx descriptors. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: fix endianness in firmware commandsDhananjay Phadke2009-01-14
| | | | | | | | | o Set restricted (little endian) data types in firmware command requests and responses. o Remove unnecessary conversion to LE when writing registers. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sis900: generate fake MAC address if the hardware doesn't have oneDaniele Venzano2009-01-14
| | | | | | | | | | | | | | | | | | The attached patch modifies the sis900 driver when the MAC address read from the hardware is invalid. As suggested, the patch now generates a random address so that the user can go on and use the hardware. In any case a message is also shown to warn on the unexpected condition. This seems to happen with newer HW implementation of the sis900 chipset, since this never came up before. Patch is against vanilla 2.6.28 (but the driver doesn't change so often, so it will probably apply to older/newer versions too). See bugzilla ID 10201 and 11649 and ignore the previous patch. Signed-off-by: Daniele Venzano <venza@brownhat.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* powerpc/fs_enet: Add missing irq free in error path.Mike Ditto2009-01-14
| | | | | | | | If something goes wrong attaching to phy driver, we weren't freeing the IRQ. Signed-off-by: Mike Ditto <mditto@consentry.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i4l: minor cleanupsPaul Bolle2009-01-14
| | | | | | | | Minor cleanups, either made possible or obvious after commit d700555 (I4l: convert to net_device_ops). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
* i4l: do not print a warning when shutting down an i4l ppp interfacePaul Bolle2009-01-14
| | | | | | | | | | | | | | | When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a scary warning is logged: isdn_free_channel: called with invalid drv(-1) or channel(-1) This warning is caused by isdn_net_unbind_channel(), which always calls isdn_free_channel() even if isdn_net_local->isdn_device and isdn_net_local->isdn_channel are (still) in a perfectly acceptable default state, so let's not do that. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
* phylib: Fix Freescale TBI PHY detectionAnton Vorontsov2009-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Author: Giulio Benetti <giulio.benetti@micronovasrl.com> Date: Thu Nov 13 21:53:13 2008 +0000 phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in gianfar driver failure to see the TBI PHYs. This code snippet triggers: if (!priv->tbiphy) { printk(KERN_WARNING "SGMII mode requires that the device " "tree specify a tbi-handle\n"); return; } Although tbi-handle is specified in the device tree. Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY manufactured by Xerox :-). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ARM etherh: Fix build failure.David S. Miller2009-01-14
| | | | | | | | Reported by Russell King: drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-01-13
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * p54: fix "‘ret’ may be used uninitialized" warningJohn W. Linville2009-01-13
| | | | | | | | | | | | | | drivers/net/wireless/p54/p54common.c: In function ‘p54_config’: drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: fix "‘power_idx’ may be used uninitialized" warningJohn W. Linville2009-01-13
| | | | | | | | | | | | | | drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’: drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43legacy: fix "‘up_dev’ may be used uninitialized" warningJohn W. Linville2009-01-13
| | | | | | | | | | | | | | drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: fix "‘gmode’ may be used uninitialized" warningJohn W. Linville2009-01-13
| | | | | | | | | | | | | | drivers/net/wireless/b43/main.c: In function ‘b43_op_config’: drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas_tf: return NETDEV_TX_OK in TX opAndrey Yurovsky2009-01-12
| | | | | | | | | | | | | | The TX op should return NETDEV_TX_OK or NETDEV_TX_BUSY. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rt2x00: Fix rt2500usb HW crypto: WEP 128 & AESIvo van Doorn2009-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TXD_W0_CIPHER field is a 1-bit field. It only acts as boolean value to indicate if the frame must be encrypted or not. The way rt2x00_set_field32() worked it would grab the least signifcant bit from txdesc->cipher and use that as value. Because of that WEP 64 and TKIP worked since they had odd-numbered values, while WEP 128 and AES were even numbers and didn't work. Correctly booleanize the txdecs->cipher value to allow the hardware to encrypt the outgoing data. After this we can enable HW crypto by default again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: fix return values from ath5k_txBob Copeland2009-01-12
| | | | | | | | | | | | | | | | | | | | | | Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change any current functionality). Changes-licensed-under: 3-Clause-BSD Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtl8187: Fix module so that rmmod/insmod does not errorJohannes Berg2009-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | Due to misunderstanding of the returned values allowed for the tx callback of mac80211, rtl8187 was using skb's that had been freed. This problem was triggered when the module was sujected to a rmmod/insmod cycle. After that was fixed, the modules would not work after the rmmod/insmod cycle until the USB device was reset. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * p54: fix WARN_ON at line 2247 of net/mac80211/rx.cChristian Lamparter2009-01-12
| | | | | | | | | | | | | | | | | | | | | | This patch hopefully fixes a mac80211<->p54 interaction problem, which was described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 ) I guess the warning was triggered by pending frames in the receive queue, while we're doing a band change 5GHz. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath5k: Correct usage of AR5K_CFG_ADHOCSteve Brown2009-01-12
| | | | | | | | | | | | | | | | | | | | | | This corrects usage of AR5K_CFG_ADHOC introduced in "ath5k: Update PCU code". Also, the name of the indicator is changed to AR5K_CFG_IBSS to more accurately reflect its function. This change restores beaconing in AP and mesh modes. Signed-off-by: Steve Brown <sbrown@cortland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Revert fix to TX status reporting for retries and MCS indexJouni Malinen2009-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reverts "ath9k: Fix TX status reporting for retries and MCS index" because that change ended up breaking ath9k rate control. While the MCS index reporting to mac80211 was indeed fixed by the patch, it did not take into account that the ath9k rate control algorithm was updating private tables based on this index and the index comes through the rate control API call, i.e., based on mac80211 TX status call. In addition, it looks like the "fix" to remove +1 from TX status 'count' field was not correct based on ieee80211_tx_status() implementation that counts the total of count values, but starting from -1, not 0. The TX status reporting for frames using MCS needs to be fixed somehow, but it does not look like there is any easy fix for the ath9k rate control algorithm, so the best option now seems to be to revert the change and bring it back once the rate control code is cleaned up to handle this better. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * ath9k: Fix incorrect sequence numbering for unaggregated QoS Frame.Senthil Balasubramanian2009-01-12
| | | | | | | | | | | | | | | | | | This patch fixes an issue with the sequence numbers of unaggregated QoS frames, because of which the frames are handled in a different order at the AP and resulted in MLME REPLAYFAILURE. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * Fix rt2500usb HW crypto: TKIPIvo van Doorn2009-01-12
| | | | | | | | | | | | | | | | | | | | | | | | | | rt2500usb doesn't strip the IV/ICV data from received frames, so we don't need to set the RX_FLAG_IV_STRIPPED flag. We do need to set the RX_FLAG_MMIC_STRIPPED flag for all encryption types since the MMIC has been removed from the frame. After this patch TKIP Hardware crypto works for rt2500usb. WEP and AES are still failing. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * rtl8180: Fix to add STA modeLarry Finger2009-01-12
| | | | | | | | | | | | | | | | | | | | | | | | To be compatible with mac80211 following "mac80211: only create default STA interface if supported", rtl8180 needs to set NL80211_IFTYPE_STATION in interface_modes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Fabio Rossi <rossi.f@inwind.it> Tested-by: Piter PUNK <piterpunk@unitednerds.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-02-02 00:55:22 -0500