aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [TG3]: Update driver version and reldate.David S. Miller2005-08-19
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* [TG3]: Fix SerDes detectionMichael Chan2005-08-19
| | | | | | | | | | | | | | | | | | | | | | | A problem was reported by Grant Grundler on an HP rx8620 using IOX Core LAN partno(A7109-6) 5701 copper NIC. The tg3 driver mistakenly detects this NIC as having a SerDes PHY and link does not come up as a result. The problem was caused by an incorrectly programmed eeprom that set the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit in the NIC_SRAM_DATA_CFG location. This patch will override the NIC_SRAM_DATA_CFG_PHY_TYPE_FIBER bit if a valid PHY ID is read from the MII registers on older 570x chips where the MII interface is not used on SerDes chips. On newer chips such as the 5780 that use MII for both copper and SerDes, SerDes detection must rely on the eeprom. This patch will make the SerDes detection identical to versions 3.25 and older. Signed-off-by: Michael Chan <mchan@broadcom.com> Acked-by: Grant Grundler <iod00d@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds2005-08-18
|\
| * [PATCH] serverworks: add support for new southbridge IDENarendra Sankar2005-08-18
| | | | | | | | | | | | | | | | | | | | BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
| * [PATCH] ide: add support for Netcell Revolution to pci-ide generic driverMatt Gillette2005-08-18
| | | | | | | | | | | | | | | | | | | | | | Adds support for Netcell Revolution to pci-ide generic driver by including it in the list of devices matched. Includes the Revolution in the list of simplex devices forced into DMA mode. Signed-off-by: Matt Gillette <matt.gillette@netcell.com> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
| * [PATCH] ide: fix PCI_DEVIEC_ID_APPLE_UNI_N_ATA spellingGrant Coady2005-08-18
| | | | | | | | Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
| * [PATCH] ide: fix the BLK_DEV_IDEDMA_PCI dependency for drivers/ide/ppc/pmac.cJuha-Matti Tapio2005-08-18
| | | | | | | | | | | | | | | | | | | | | | | | drivers/ide/ppc/pmac.c uses symbols ide_build_sglist, __ide_dma_off_quietly, __ide_dma_on and __ide_dma_timeout when CONFIG_BLK_DEV_IDEDMA_PMAC is defined. The declarations for these symbols (in ide.h) depend on CONFIG_BLK_DEV_IDEDMA_PCI. There is a missing dependency for this in drivers/ide/Kconfig which causes drivers/ide/ppc/pmac.c to fail to build if CONFIG_BLK_DEV_IDEDMA_PMAC is selected but CONFIG_BLK_DEV_IDEDMA_PCI is not. Signed-off-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
| * [PATCH] ide-floppy: fix IDEFLOPPY_TICKS_DELAYBartlomiej Zolnierkiewicz2005-08-18
| | | | | | | | | | | | | | | | | | * IDEFLOPPY_TICKS_DELAY assumed HZ == 100, fix it * increase the delay to 50ms (to match comment in the code) Thanks to Manfred Scherer <manfred.scherer.mhm@t-online.de> for reporting the problem and testing the patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>
* | Merge head 'upstream-fixes' of ↵Linus Torvalds2005-08-18
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
| * | [PATCH] DM9000 - incorrect ioctl() handlingBen Dooks2005-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DM9000 driver is responding to ioctl() calls it should not be. This can cause problems with the wireless tools incorrectly indentifying the device as wireless capable, and crashing under certain operations. This patch also moves the version printk() to the init call, so that you only get it once for multiple devices, and to show it is loaded if there are no defined dm9000s Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | [PATCH] DM9000 - spinlock fixesBen Dooks2005-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix DM9000 driver usage of spinlocks, which mainly came to light when running a kernel with spinlock debugging. These come down to: 1) Un-initialised spin lock 2) Several cases of using spin_xxx(lock) and not spin_xxx(&lock) 3) move the locking around the phy reg for read/write to only keep the lock when actually reading or writing to the phy. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | [PATCH] 8139cp - redetect link after suspendPierre Ossman2005-08-18
| | | | | | | | | | | | | | | | | | | | | | | | After suspend the driver needs to retest link status in case the cable has been inserted or removed during the suspend. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | [PATCH] IOC3 fixesRalf Baechle2005-08-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | - Using the right register clearly improves chances of getting the MII code and thus the driver working at all. - On startup check the media type before setting up duplex or we might spend the first 1.2s with a wrong duplex setting. - Get rid of whitespace lines. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* | | [NET]: Fix comment in loopback driver.Ralf Baechle2005-08-18
|/ / | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] disable debug info in radeonfb old driverMichael Iatrou2005-08-18
| | | | | | | | | | | | | | This driver spams the user. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] md: make sure mddev->bitmap_offset gets cleared between array ↵NeilBrown2005-08-18
|/ | | | | | | | | | | | | | | | instantiations. ... otherwise we might try to load a bitmap from an array which hasn't one. The bug is that if you create an array with an internal bitmap, shut it down, and then create an array with the same md device, the md drive will assume it should have a bitmap too. As the array can be created with a different md device, it is mostly an inconvenience. I'm pretty sure there is no risk of data corruption. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] broken error path in drivers/pnp/card.cJaroslav Kysela2005-08-18
| | | | | | | | | | The error path in pnp_request_card_device() is broken (one variable is left initialized and the semaphore is not unlocked). This fixes it (and has been tested). Signed-off-by: Jaroslav Kysela <perex@suse.cz> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Fix manual binding infinite loopGreg KH2005-08-18
| | | | | | | | | | | | Fix for manual binding of drivers to devices. Problem is if you pass in a valid device id, but the driver refuses to bind. Infinite loop as write() tries to resubmit the data it just sent. Thanks to Michal Ostrowski <mostrows@watson.ibm.com> for pointing the problem out. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge head 'release' of ↵Linus Torvalds2005-08-17
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6
| * [IA64] Initialize some spinlocksKeith Owens2005-08-16
| | | | | | | | | | | | | | Some IA64 spinlocks are not being initialized, make it so. Signed-off-by: Keith Owens <kaos@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* | [PATCH] USB: usbmon: Copyrights and a typoPete Zaitcev2005-08-17
| | | | | | | | | | | | | | | | Add copyright statements and fix a typo. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] USB: fix usb wacom tablet driver bugPing Cheng2005-08-17
| | | | | | | | | | | | | | | | This patch fixes bug 4905 and a Cintiq 21UX bug. Signed-off-by: Ping Cheng <pingc@wacom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] PCI Hotplug: new contact infoKristen Accardi2005-08-17
| | | | | | | | | | | | Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] PCI: fix quirk-6700-fix.patchAndrew Morton2005-08-17
| | | | | | | | | | | | | | | | | | drivers/built-in.o(.text+0x32c3): In function `quirk_pcie_pxh': /usr/src/25/drivers/pci/quirks.c:1312: undefined reference to `disable_msi_mode' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] PCI: 6700/6702PXH quirkKristen Accardi2005-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | On the 6700/6702 PXH part, a MSI may get corrupted if an ACPI hotplug driver and SHPC driver in MSI mode are used together. This patch will prevent MSI from being enabled for the SHPC as part of an early pci quirk, as well as on any pci device which sets the no_msi bit. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Driver core: potentially fix use after free in class_device_attr_showManeesh Soni2005-08-17
| | | | | | | | | | | | | | | | | | | | | | | | | | This moves the code to free devt_attr from class_device_del() to class_dev_release() which is called after the last reference to the corresponding kobject() is gone. This allows us to keep the devt_attr alive while the corresponding sysfs file is open. Signed-off-by: Maneesh Soni <maneesh@in.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge ../from-linusLen Brown2005-08-15
|\|
| * [PATCH] intelfb/fbdev: Save info->flags in a local variableAntonino A. Daplas2005-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported by: Pavel Kysilka (Bugzilla Bug 5059) The intelfb driver does not keep resolution set with fbset after switching to anot console and back. Steps to reproduce: initial options: tty1,tty2 - 1024x768-60 1) tty1 - fbset after booting (1024x768-60) 2) tty1 - fbset 800x600-100 tty1: 800x600-100 3) swith to tty2, swith to tty1 tty1: 1024x768-60 (the same resolution as default from kernel booting) This bug is caused by intelfb unintentionally destroying info->flags in set_par(). Therefore the flag, FBINFO_MISC_USEREVENT used to notify fbcon of a mode change was cleared causing the above problem. This bug though is not intelfb specific, as other drivers may also be affected. The fix is to save info->flags in a local variable before calling any of the driver hooks. A more definitive fix (for post 2.6.13) is to separate info->flags into one that is set by the driver and another that is set by core fbdev/fbcon. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] intelfb: Do not ioremap entire graphics apertureSylvain Meyer2005-08-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported by: Pavel Kysilka (Bugzilla Bug 4738) modprobe of intelfb results in the following error message: intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chi intelfb: Version 0.9.2 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 allocation failed: out of vmalloc space - use vmalloc=<size> to increase siz intelfb: Cannot remap FB region. This will fail if the graphics aperture size is greater than 128 MB. Fix is to ioremap only from the beginning of graphics aperture to the end of the used framebuffer memory. Signed-off-by: Sylvain Meyer <sylvain.meyer@worldonline.fr> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge ../to-linus-stable/Len Brown2005-08-15
|\ \ | |/ |/|
| * [ACPI] re-enable platform-specific hotkey drivers by defaultLuming Yu2005-08-15
| | | | | | | | | | | | | | | | | | | | When both platform-specific and generic drivers exist, enable generic over-ride with "acpi_generic_hotkey". http://bugzilla.kernel.org/show_bug.cgi?id=4953 Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | Revert PCIBIOS_MIN_IO changes for 2.6.13Linus Torvalds2005-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commits 71db63acff69618b3d9d3114bd061938150e146b [PATCH] increase PCIBIOS_MIN_IO on x86 and 0b2bfb4e7ff61f286676867c3508569bea6fbf7a ACPI: increase PCIBIOS_MIN_IO on x86 since Lukas Sandströ<lukass@etek.chalmers.se> reports that this breaks his on-board nvidia audio. We should re-visit this later. For now we revert the change Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Revert "dc395x: Fix support for highmem"Linus Torvalds2005-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It introduces a repeatable oops in the driver, which is a bigger problem than the patch tries to solve. From the original description: Author: Jamie Lenehan <lenehan@twibble.org> Date: Thu Mar 3 14:41:40 2005 +0200 [PATCH] dc395x: Fix support for highmem From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Removes the page_to_virt and maps sg lists dynamically. This makes the driver work with highmem pages. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Fix up mmap of /dev/kmemLinus Torvalds2005-08-13
| | | | | | | | | | | | This leaves the issue of whether we should deprecate the whole thing (or if we should check the whole mmap range, for that matter) open. Just do the minimal fix for now.
* | [PATCH] w1: more debug level decrease.Evgeniy Polyakov2005-08-12
| | | | | | | | | | | | | | | | Do not spam syslog each 10 seconds when there is nothing on the wire. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [NETPOLL]: e1000 netpoll tweakMatt Mackall2005-08-11
| | | | | | | | | | | | | | Suggested by Steven Rostedt, matches his patch included in e100. Signed-off-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge head 'upstream-fixes' of ↵Linus Torvalds2005-08-10
|\ \ | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
| * | libata: fix EH-related lockup by properly cleaning EH command listTejun Heo2005-08-10
| | | | | | | | | | | | | | | Yet another hack due to the fact that libata is the only user of SCSI's ->eh_strategy_handler() hook.
| * | [PATCH] sata: fix sata_sx4 dma_prep to not use sg->lengthTejun Heo2005-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_sx4 directly references sg->length to calculate total_len in pdc20621_dma_prep(). This is incorrect as dma_map_sg() could have merged multiple sg's into one and, in such case, sg->length doesn't reflect true size of the entry. This patch makes it use sg_dma_len(sg). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
* | | [PATCH] wbsd version bumpPierre Ossman2005-08-10
| | | | | | | | | | | | | | | | | | | | | | | | Even though the changes are minor for the next release an increasing version number simplifies my support issues. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2005-08-10
|\ \ \
| * | | [PATCH] ARM: 2846/1: proper handling of CKEN for pxafbNicolas Pitre2005-08-10
| |/ / | | | | | | | | | | | | | | | | | | Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | [PATCH] ns558 list handling fixAlexander Nyberg2005-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to use list_for_entry_safe(), as we're removing items during the traversal. list_for_each_entry() uses the first ptr also as an iterator, if you kfree() it slab takes it, might poison it and then you try to use it to iterate to the next object in list. Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] 6pack persistence fixRalf Baechle DL5RB2005-08-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the p-persistence CSMA algorithm which in simplex mode was starting with a slottime delay before doing anything else as if there was carrier collision resulting in bad performance on simplex links. Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2005-08-10
|\ \ \ | |/ / |/| |
| * | [SCSI] dpt_i2o pci_request_regions fixSalyzyn, Mark2005-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally From: Andrew Morton <akpm@osdl.org> Altered By: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> There is an additional 'build fix' patch that Andrew Morton submitted on the kernel list (I have changed out his dpr_i2o with dpt_i2o below though). Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] fix target scanning oops with fc transport classJames.Smart@Emulex.Com2005-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have some nasty issues with 2.6.12-rc6. Any request to scan on the lpfc or qla2xxx FC adapters will oops. What is happening is the system is defaulting to non-transport registered targets, which inherit the parent of the scan. On this second scan, performed by the attribute, the parent becomes the shost instead of the rport. The slave functions in the 2 FC adapters use starget_to_rport() routines, which incorrectly map the shost as an rport pointer. Additionally, this pointed out other weaknesses: - If the target structure is torn down outside of the transport, we have no method for it to be regenerated at the proper parent. - We have race conditions on the target being allocated by both the midlayer scan (parent=shost) and by the fc transport (parent=rport). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] Bug 4940 Repeatable Kernel Panic on Adaptec 2015S I20 device on bootupJames Bottomley2005-08-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Prevent driver from loading if another driver (i2o) has already claimed the resources associated with the card. Discussion associated with this bug can be referenced at http://bugzilla.kernel.org/show_bug.cgi?id=4940 where it was agreed to use pci_request_regions in both the dpt_i2o and the i2o driver to prevent both drivers loading on the same adapter(s). Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | [PATCH] Fix ide-disk.c oops caused by hwif == NULLChristoph Lameter2005-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Move hwif_to_node to ide.h 2. Use hwif_to_node in ide-disk.c Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] DVB: lgdt330x frontend: some bug fixes & add lgdt3303 supportMichael Krufky2005-08-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the tda9887 stuff from lgdt330x.c. It's experimental code which wasn't supposed to leak out and we don't want it in 2.6.13. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-17 03:48:12 -0500