aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* USB OHCI controller support for PNX4008Vitaly Wool2006-09-27
| | | | | | | | | | | | | inlined is the patch that adds basic support for USB OHCI controller support for PNX4008 Philips PNX4008 ARM board. Due to HW design, it depends on I2C driver for PNX4008 which I've recetnly posted to LKML and i2c at lm-sensors. Signed-off-by: Vitaly Wool <vitalywool@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ohci-s3c2410.c: clock now usb-bus-hostBen Dooks2006-09-27
| | | | | | | | | | | | | | | | | | | | With the newer Samsung S3C2412 and S3C2413 SoC devices, the 48MHz USB clock has been given an individual gate into the USB OHCI and gadget blocks. This clock is called usb-bus-clock, and we need to replace the old use of the USB PLL (upll) directly with the new usb-bus-host. The S3C2410 clock driver has been updated already to provide a virtual clock which is a child of the UPLL to maintain compatibility. The S3C2412 clock driver correctly enables the PLL when either usb-bus clock is active. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: OHCI avoids root hub timer pollingDavid Brownell2006-09-27
| | | | | | | | | | | | | | This teaches OHCI to use the root hub status change (RHSC) IRQ, bypassing root hub timers most of the time and switching over to the "new" root hub polling scheme. It's complicated by the fact that implementations of OHCI trigger and ack that IRQ differently (the spec is vague there). Avoiding root hub timers helps mechanisms like "dynamic tick" leave the CPU in lowpower modes for longer intervals. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_dev entry for Sony P990iPhil Dibowitz2006-09-27
| | | | | | | | | This patch is a re-diffed version of one originally sent by Jan Mate <mate@fiit.stuba.sk>. Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: unusual_devs entry for Lacie DVD+-RWAlan Stern2006-09-27
| | | | | | | | | | | | | | | This patch (as781) adds an entry to unusual_devs.h for the Lacie DVD+-RW drive. Apparently its USB interface has requirements similar to the Genesys Logic interface; it doesn't like data to be sent too soon after a command. This fixes Bugzilla #6817. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Phil Dibowitz <phil@ipom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2006-09-27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (108 commits) sh: Fix occasional flush_cache_4096() stack corruption. sh: Calculate shm alignment at runtime. sh: dma-mapping compile fixes. sh: Initial vsyscall page support. sh: Clean up PAGE_SIZE definition for assembly use. sh: Selective flush_cache_mm() flushing. sh: More intelligent entry_mask/way_size calculation. sh: Support for L2 cache on newer SH-4A CPUs. sh: Update kexec support for API changes. sh: Optimized readsl()/writesl() support. sh: Report movli.l/movco.l capabilities. sh: CPU flags in AT_HWCAP in ELF auxvt. sh: Add support for 4K stacks. sh: Enable /proc/kcore support. sh: stack debugging support. sh: select CONFIG_EMBEDDED. sh: machvec rework. sh: Solution Engine SH7343 board support. sh: SH7710VoIPGW board support. sh: Enable verbose BUG() support. ...
| * watchdog: Add a simple mmap() stub for shwdt.Paul Mundt2006-09-27
| | | | | | | | | | | | | | | | In some applications people have expressed a need for an mmap() method, so we implement a simple stub for this that maps back a page with the counter in it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Kill off the rest of the legacy rtc mess.Paul Mundt2006-09-27
| | | | | | | | | | | | | | With the new RTC class driver, we can get rid of most of the old left over cruft. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * serial: Add SERIAL_SH_SCI_NR_UARTS for sh-sci.Paul Mundt2006-09-27
| | | | | | | | | | | | | | | | sh-sci needs to be able to define its number of ports to support, we do this with a config option, like most other ports do. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * rtc: New RTC driver for SuperH On-Chip RTC.Paul Mundt2006-09-27
| | | | | | | | | | | | | | | | This replaces the old SH RTC driver, and allows us to clean quite a lot of things up on the board-specific side. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * serial: Rework sh-sci for driver model.Paul Mundt2006-09-27
| | | | | | | | | | | | | | | | | | sh-sci was turning in to an unmaintainable mess, especially with regards to the port list. This cleans it up quite a bit, and switches over to a platform device model where subtypes will register their port list individually in their setup code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: APM/PM support.Andriy Skulysh2006-09-27
| | | | | | | | | | | | | | | | | | This adds some simple PM stubs and the basic APM interfaces, primarily for use by hp6xx, where the existing userland expects it. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * video: Update header location in hp680_bl.Andriy Skulysh2006-09-27
| | | | | | | | | | | | | | Trivial build fix. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * video: Update pvr2fb for sq API changes.Paul Mundt2006-09-27
| | | | | | | | | | | | | | With the store queue API rework, we need to change the in-kernel users too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Board updates for I/O routine rework.Paul Mundt2006-09-27
| | | | | | | | | | | | | | This updates the various boards for some of the recent I/O routine updates. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * video: hitfb suspend/resume and updates.Andriy Skulysh2006-09-27
| | | | | | | | | | | | | | | | suspend/resume support for hitfb, as well as some other minor cleanups. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * video: Disable vgacon for SuperH.Paul Mundt2006-09-27
| | | | | | | | | | | | We don't support this on SH, so just disable it.. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: hp6xx mach-type cleanups.Andriy Skulysh2006-09-27
| | | | | | | | | | | | | | | | Some minor cleanups for the updated consolidated hp6xx mach-type. Signed-off-by: Andriy Skulysh <askulysh@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * sh: Various cosmetic cleanups.Paul Mundt2006-09-26
| | | | | | | | | | | | | | | | We had quite a bit of whitespace damage, clean most of it up.. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Arthur Othieno <a.othieno@bluewin.ch> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | [PATCH] msi: use kmem_cache_zalloc()Pekka J Enberg2006-09-27
| | | | | | | | | | | | | | | | | | Simpler, cleaner. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] EISA bus MODALIAS attributes supportMichael Tokarev2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add modalias attribute support for the almost forgotten now EISA bus and (at least some) EISA-aware modules. The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093 and the in-module alias like: eisa:sTCM5093* The patch moves struct eisa_device_id declaration from include/linux/eisa.h to include/linux/mod_devicetable.h (so that the former now #includes the latter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for all drivers with EISA IDs I found (some drivers already have that DEVICE_TABLE declared), and adds recognision of __mod_eisa_device_table to scripts/mod/file2alias.c so that proper modules.alias will be generated. There's no support for /lib/modules/$kver/modules.eisamap, as it's not used by any existing tools, and because with in-kernel modalias mechanism those maps are obsolete anyway. The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;) [akpm@osdl.org: fix the kbuild bit] Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Acked-the-net-bits-by: Jeff Garzik <jeff@garzik.org> Acked-the-tulip-bit-by: Valerie Henson <val_henson@linux.intel.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] x86 microcode: using request_firmware to pull microcodeShaohua Li2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using request_firmware to pull ucode from userspace, so we don't need the application 'microcode_ctl' to assist. We name each ucode file according to CPU's info as intel-ucode/family-model-stepping. In this way we could split ucode file as small one. This has a lot of advantages such as selectively update and validate microcode for specific models, better manage microcode file, easily write tools for administerators and so on. with the changes, we should put all intel-ucode/xx-xx-xx microcode files into the firmware dir (I had a tool to split previous big data file into small one and later we will release new style data file). The init script should be changed to just loading the driver without unloading Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Tigran Aivazian <tigran@veritas.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] inode-diet: Eliminate i_blksize from the inode structureTheodore Ts'o2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This eliminates the i_blksize field from struct inode. Filesystems that want to provide a per-inode st_blksize can do so by providing their own getattr routine instead of using the generic_fillattr() function. Note that some filesystems were providing pretty much random (and incorrect) values for i_blksize. [bunk@stusta.de: cleanup] [akpm@osdl.org: generic_fillattr() fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] inode_diet: Replace inode.u.generic_ip with inode.i_privateTheodore Ts'o2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patches reduce the size of the VFS inode structure by 28 bytes on a UP x86. (It would be more on an x86_64 system). This is a 10% reduction in the inode size on a UP kernel that is configured in a production mode (i.e., with no spinlock or other debugging functions enabled; if you want to save memory taken up by in-core inodes, the first thing you should do is disable the debugging options; they are responsible for a huge amount of bloat in the VFS inode structure). This patch: The filesystem or device-specific pointer in the inode is inside a union, which is pretty pointless given that all 30+ users of this field have been using the void pointer. Get rid of the union and rename it to i_private, with a comment to explain who is allowed to use the void pointer. This is just a cleanup, but it allows us to reuse the union 'u' for something something where the union will actually be used. [judith@osdl.org: powerpc build fix] Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Judith Lebzelter <judith@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] NOMMU: Set BDI capabilities for /dev/mem and /dev/kmemDavid Howells2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the backing device info capabilities for /dev/mem and /dev/kmem to permit direct sharing under no-MMU conditions and full mapping capabilities under MMU conditions. Make the BDI used by these available to all directly mappable character devices. Also comment the capabilities for /dev/zero. [akpm@osdl.org: ifdef reductions] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] mspec driverJes Sorensen2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | Implement the special memory driver (mspec) based on the do_no_pfn approach. The driver is currently used only on SN2 hardware with special fetchop support but could be beneficial on other architectures using the uncached mode. Signed-off-by: Jes Sorensen <jes@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] Really ignore kmem_cache_destroy return valueAlexey Dobriyan2006-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Rougly half of callers already do it by not checking return value * Code in drivers/acpi/osl.c does the following to be sure: (void)kmem_cache_destroy(cache); * Those who check it printk something, however, slab_error already printed the name of failed cache. * XFS BUGs on failed kmem_cache_destroy which is not the decision low-level filesystem driver should make. Converted to ignore. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6Linus Torvalds2006-09-27
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/i2c-2.6: (30 commits) i2c: Drop unimplemented slave functions i2c: Constify i2c_algorithm declarations, part 2 i2c: Constify i2c_algorithm declarations, part 1 i2c: Let drivers constify i2c_algorithm data i2c-isa: Restore driver owner i2c-viapro: Add support for the VT8237A and VT8251 i2c: Warn on i2c client creation failure i2c-core: Drop useless bitmaskings i2c-algo-pcf: Discard the mdelay data struct member i2c-algo-bit: Cleanups i2c-isa: Fail adding driver on attach_adapter error i2c: __must_check fixes (chip drivers) i2c-dev: attach/detach_adapter cleanups i2c-stub: Chip address as a module parameter i2c: Plan i2c-isa for removal i2c: New bus driver for TI OMAP boards i2c-algo-bit: Discard the mdelay data struct member i2c-matroxfb: Struct init conversion i2c: Fix copy-n-paste in subsystem Kconfig i2c-au1550: Add I2C support for Au1200 ...
| * | i2c: Constify i2c_algorithm declarations, part 2Jean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: Constify i2c_algorithm declarations, part 2 Make struct i2c_algorithm declarations const in all i2c bus drivers where it is possible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c: Constify i2c_algorithm declarations, part 1Jean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: Constify i2c_algorithm declarations, part 1 Make struct i2c_algorithm declarations const in all i2c algorithm drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-isa: Restore driver ownerJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-isa: Restore driver owner Commit 2b48716d1d2f2edb1e7cbc5ecf1cb2cb39373e33 back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-viapro: Add support for the VT8237A and VT8251Rudolf Marek2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-viapro: Add support for the VT8237A and VT8251 Documentation update included. Compile tested. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c: Warn on i2c client creation failureJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: Warn on i2c client creation failure Warn when an i2c client creation fails. If we don't, the user will never know something wrong happened, as i2c client creation is typically called through an attach_adapter callback, those return value we currently ignore for technical reasons. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-core: Drop useless bitmaskingsJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-core: Drop useless bitmaskings The code generated is exactly the same. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-algo-pcf: Discard the mdelay data struct memberAdrian Bunk2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-pcf: Discard the mdelay data struct member Just as i2c-algo-bit, i2c-algo-pcf has an unused mdelay struct member, which we can get rid of to spare some code and memory. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-algo-bit: CleanupsJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-bit: Cleanups * Uninline long functions (saves around 1 kB or 15%) * Refactor code in sclhi() * Drop redundant udelay on repeated start Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-isa: Fail adding driver on attach_adapter errorDavid Hubbard2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-isa: Fail adding driver on attach_adapter error Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c: __must_check fixes (chip drivers)Jean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: __must_check fixes (chip drivers) Check for error on sysfs file creation. Delete sysfs files on device removal. The approach taken for the most complex case (pcf8591) is similar to what Mark M. Hoffman proposed for hardware monitoring chip drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ben Gardner <bgardner@wabtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-dev: attach/detach_adapter cleanupsJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-dev: attach/detach_adapter cleanups * Only print that an adapter was attached when it succeeds. * i2c_dev == NULL on detach simply means that the attach failed before, this isn't an error per se. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-stub: Chip address as a module parameterJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-stub: Chip address as a module parameter Add a mandatory chip_addr parameter to i2c-stub. This parameter defines to which chip address the driver will respond, instead of reponding to all addresses as before. The idea is to prevent the users from loading i2c-stub at random and being then confused by the results of sensors-detect or other user-space tools. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c: New bus driver for TI OMAP boardsKomal Shah2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: New bus driver for TI OMAP boards This patch adds I2C bus driver for various Texas Instruments (TI) OMAP1/2 (http://www.ti.com/omap) series based boards like OMAP1510/1610/1710/242x. Signed-off-by: Komal Shah <komal_shah802003@yahoo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-algo-bit: Discard the mdelay data struct memberJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-matroxfb: Struct init conversionJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-matroxfb: Struct init conversion Convert the struct i2c_algo_bit_data initialization to proper C99 style. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c: Fix copy-n-paste in subsystem KconfigArthur Othieno2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c: Fix copy-n-paste in subsystem Kconfig We have: drivers/i2c/Kconfig:2:# Character device configuration Which is obviously not true.. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-au1550: Add I2C support for Au1200Domen Puncer2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-au1550: Add I2C support for Au1200 Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-au1550: Add SMBus functionality flagDomen Puncer2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-au1550: Add SMBus functionality flag Add SMBus functionality flag, so we can use eeprom and similar drivers. Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-au1550: Fix timeout problemDomen Puncer2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-au1550: Fix timeout problem Fix from Jordan Crouse: If the transmit and recieve FIFOS are not empty, forceably flush them rather then waiting for them to drain on their own. This solves at least a problem reported by Clem Taylor: http://www.linux-mips.org/archives/linux-mips/2006-05/msg00240.html (1% of I2C transactions would timeout) Signed-off-by: Domen Puncer <domen.puncer@ultra.si> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-sibyte: Kip Walker is goneJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-sibyte: Kip Walker is gone Kip Walker no longer works at Broadcom, and his e-mail address there bounces back, so let's drop it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-algo-sibyte: Merge into i2c-sibyteJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-sibyte: Merge into i2c-sibyte Merge i2c-algo-sibyte into i2c-sibyte, as this is a complete, hardware-dependent SMBus implementation and not a reusable algorithm. Perform some basic coding style cleanups while we're here (mainly space-based indentation replaced by tabulations.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | i2c-algo-sibyte: CleanupsJean Delvare2006-09-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c-algo-sibyte: Cleanups * Delete empty algo_control implementation. * Simplify i2c_sibyte_del_bus. * Delete empty module init and cleanup functions. * Drop out-of-date #ifdef MODULE construct. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-17 16:07:52 -0500