aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* Kconfig: clarify ATA_PIIX descriptionAlan2007-02-09
| | | | | | | | People are getting confused about which drivers to enable for PATA PIIX type devices. Change the ATA_PIIX line and help to make it clearer. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_inic162x: fix a few glitches in hardresetTejun Heo2007-02-09
| | | | | | | | | | | | | * Hardreset must not exit without actually performing reset regardless of link status. We're resetting the link after all. * Minor message update. * 150ms delay is meaningful iff link is online after reset is complete. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add 150ms between completion of hardreset and status checkingTejun Heo2007-02-09
| | | | | | | | | | | | | | Follow the old SRST rule and delay 150ms between completion of hardreset and status checking. Debouncing delay should usually cover this but debounce duration could be shorter than 150ms under certain circumstances. Usefulness depends on host controller implementation but it can't hurt and serves as a reminder that 2s delay for GoVault should also be added here. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: rearrange dmesg info to add full ATA revisionEric D. Mudama2007-02-09
| | | | | | | | | Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_sl82c105: wrong assumptions about compatible PIO modesSergei Shtylyov2007-02-09
| | | | | | | Fix the wrong "compatible" PIO mode choices: MWDMA0 has 480 ns cycle while PIO1 only has 383 ns cycle, and MWDMA2 timings matchs those of PIO4 exactly. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add another IRQ calls (libata drivers)Akira Iguchi2007-02-09
| | | | | | | | | | | | | | | | | | This patch is against each libata driver. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: add another IRQ calls (core and headers)Akira Iguchi2007-02-09
| | | | | | | | | | | | | | | | | | This patch is against the libata core and headers. Two IRQ calls are added in ata_port_operations. - irq_on() is used to enable interrupts. - irq_ack() is used to acknowledge a device interrupt. In most drivers, ata_irq_on() and ata_irq_ack() are used for irq_on and irq_ack respectively. In some drivers (ex: ahci, sata_sil24) which cannot use them as is, ata_dummy_irq_on() and ata_dummy_irq_ack() are used. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: convert to iomapTejun Heo2007-02-09
| | | | | | | | | | | | | | | | Convert libata core layer and LLDs to use iomap. * managed iomap is used. Pointer to pcim_iomap_table() is cached at host->iomap and used through out LLDs. This basically replaces host->mmio_base. * if possible, pcim_iomap_regions() is used Most iomap operation conversions are taken from Jeff Garzik <jgarzik@pobox.com>'s iomap branch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_platform: fix devres conversionTejun Heo2007-02-09
| | | | | | | | devres updates for pata_platform were dropped while merging devres patches due to merge conflict. This is the updated version. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] Shuffle DRV_xxx in core and SiS drivers, to kill warningsJeff Garzik2007-02-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: remove unused functionsTejun Heo2007-02-09
| | | | | | | | Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: update libata LLDs to use devresTejun Heo2007-02-09
| | | | | | | | | | | | | | | | | Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: update libata core layer to use devresTejun Heo2007-02-09
| | | | | | | | | | | | | | | | | | | | | | Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement ata_host_detach()Tejun Heo2007-02-09
| | | | | | | | | | Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* devres: device resource managementTejun Heo2007-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement device resource management, in short, devres. A device driver can allocate arbirary size of devres data which is associated with a release function. On driver detach, release function is invoked on the devres data, then, devres data is freed. devreses are typed by associated release functions. Some devreses are better represented by single instance of the type while others need multiple instances sharing the same release function. Both usages are supported. devreses can be grouped using devres group such that a device driver can easily release acquired resources halfway through initialization or selectively release resources (e.g. resources for port 1 out of 4 ports). This patch adds devres core including documentation and the following managed interfaces. * alloc/free : devm_kzalloc(), devm_kzfree() * IO region : devm_request_region(), devm_release_region() * IRQ : devm_request_irq(), devm_free_irq() * DMA : dmam_alloc_coherent(), dmam_free_coherent(), dmam_declare_coherent_memory(), dmam_pool_create(), dmam_pool_destroy() * PCI : pcim_enable_device(), pcim_pin_device(), pci_is_managed() * iomap : devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(), devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(), pcim_iomap(), pcim_iounmap() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* fix CONFIG_SATA_SIS=y compile errorAdrian Bunk2007-02-09
| | | | | | | | | | | | | | | | | Static code shouldn't be used from other modules. drivers/built-in.o: In function `sis_init_one': sata_sis.c:(.text+0x7634cd): undefined reference to `sis_info133' sata_sis.c:(.text+0x7634d6): undefined reference to `sis_info133' While I was at it, I also moved the prototype of this struct to a header file. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_sis: Support for PATA supportsAlan2007-02-09
| | | | | | | | | | | | This is quick rework of the patch Uwe proposed but using Kconfig not ifdefs and user selection to sort out PATA support. Instead of ifdefs and requiring the user to select both drivers the SATA driver selects the PATA one. For neatness I've also moved the extern into the function that uses it. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: implement HDIO_GET_IDENTITYTejun Heo2007-02-09
| | | | | | | | | 'hdparm -I' doesn't work with ATAPI devices and sg_sat is not widely spread yet leaving no easy way to access ATAPI IDENTIFY data. Implement HDIO_GET_IDENTITY such that at least 'hdparm -i' works. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: trivial stuffAlan2007-02-09
| | | | | | | Readability/typos etc Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: kill qc->nsectTejun Heo2007-02-09
| | | | | | | Merge order left qc->nsect usage in sata_promise dangling. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata piix3 support warning fixAndrew Morton2007-02-09
| | | | | Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: PIIX3 supportAlan2007-02-09
| | | | | | | | | | | This I believe completes the PIIX range of support for libata This adds the table entries needed for the PIIX3, both a new PCI identifier and a new mode list. It also fixes an erroneous access to PCI configuration 0x48 on non UDMA capable chips. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: handle ATAPI_NODATA ourselvesMikael Pettersson2007-02-09
| | | | | | | | | | | | | | | | | | | | | This patch extends sata_promise to handle ATAPI_NODATA commands internally. However, commands destined to ATA_DFLAG_CDB_INTR devices are excluded from this and continue to be returned to libata. Concrete changes: - pdc_atapi_dma_pkt() is renamed to pdc_atapi_pkt(), and is extended to set up correct headers for NODATA packets - pdc_qc_prep() calls pdc_atapi_pkt() for ATAPI_NODATA - pdc_host_intr() handles ATAPI_NODATA - pdc_qc_issue_prot() sends ATAPI_NODATA packets via the chip's packet mechanism, except for CDB_INTR devices Tested on first- and second-generation chips, SATAPI and PATAPI, with no observable regressions. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: issue ATAPI commands as normal packetsMikael Pettersson2007-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (against libata #upstream + the ATAPI cleanup patch) reimplements sata_promise's ATAPI support to format ATAPI DMA commands as normal packets, and to issue them via the hardware's normal packet machinery. It turns out that the only reason for issuing ATAPI DMA commands via the pdc_issue_atapi_pkt_cmd() procedure was to perform two interrupt-fiddling steps for ATA_DFLAG_CDB_INTR devices. But these steps aren't needed because sata_promise sets ATA_FLAG_PIO_POLLING, which disables DMA for those devices. The remaining steps can easily be done in ATA taskfile packets. Concrete changes: - pdc_atapi_dma_pkt() is extended to program all packet setup steps, and not just contain the CDB; the sequence of steps exactly mirrors what pdc_issue_atapi_pkt_cmd() did - pdc_atapi_dma_pkt() needed more parameters: simplify it by just passing 'qc' and having it extract the data it needs - pdc_issue_atai_pkt_cmd() and its two helper procedures pdc_wait_for_drq() and pdc_wait_on_busy() are removed Tested on first- and second-generation chips, SATAPI and PATAPI, with no observable regressions. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: ATAPI cleanupMikael Pettersson2007-02-09
| | | | | | | | | | | | | | Here's a cleanup for yesterday's sata_promise ATAPI patch: - add and use a symbolic constant for the altstatus register - check return status from ata_busy_wait() - add missing newline in a warning printk() - update comment in pdc_issue_atapi_pkt_cmd() to clarify that the maybe-wait-for-INT issue cannot occur in the current driver, but may occur if the driver starts issuing ATAPI non-DMA commands as PDC packets Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_inic162x: finally, driver for initio 162x SATA controllers, take #2Tejun Heo2007-02-09
| | | | | | | | | Driver for Initio 162x SATA controllers. ATA r/w, ATAPI r, hotplug and suspend/resume work. ATAPI w (recording, that is) broken. Feel free to fix it, but be warned, this controller is weird. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: kill qc->nsect and cursectTejun Heo2007-02-09
| | | | | | | | | | | | libata used two separate sets of variables to record request size and current offset for ATA and ATAPI. This is confusing and fragile. This patch replaces qc->nsect/cursect with qc->nbytes/curbytes and kills them. Also, ata_pio_sector() is updated to use bytes for qc->cursg_ofs instead of sectors. The field used to be used in bytes for ATAPI and in sectors for ATA. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_vsc: build fix after PCI MSI feature additionJeff Garzik2007-02-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] sata_vsc: support PCI MSIDan Wolstenholme2007-02-09
| | | | Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: handle pci_enable_device() failure while resumingTejun Heo2007-02-09
| | | | | | | | | Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: use ata_id_c_string()Tejun Heo2007-02-09
| | | | | | | | | | There were several places where ATA ID strings are manually terminated and in some places possibly unterminated strings were passed to string functions which don't limit length like strstr(). This patch converts all of them over to ata_id_c_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata: straighten out ATA_ID_* constantsTejun Heo2007-02-09
| | | | | | | | | | | | | | * Kill _OFS suffixes in ATA_ID_{SERNO|FW_REV|PROD}_OFS for consistency with other ATA_ID_* constants. * Kill ATA_SERNO_LEN * Add and use ATA_ID_SERNO_LEN, ATA_ID_FW_REV_LEN and ATA_ID_PROD_LEN. This change also makes ata_device_blacklisted() use proper length for fwrev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_nv: add suspend/resume support v3 (Resubmit)Robert Hancock2007-02-09
| | | | | | | | Thoughts from Jeff & company on merging the patch below into libata-dev? This has been in the -mm tree for over a month now, I haven't heard any complaints about regressions.. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* drivers/ata/: make 4 functions staticAdrian Bunk2007-02-09
| | | | | | | | | | | This patch makes the following needlessly global functions static: - libata-core.c: ata_qc_complete_internal() - libata-scsi.c: ata_scsi_qc_new() - libata-scsi.c: ata_dump_status() - libata-scsi.c: ata_to_sense_error() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ahci: Remove jmicron fixupAlan2007-02-09
| | | | | | | | | The AHCI set up is handled properly along with the other bits in the JMICRON quirk. Remove the code whacking it in ahci.c as its un-needed and also blindly fiddles with bits it doesn't own. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* libata-sff: Don't try and activate channels which are not in useAlan2007-02-09
| | | | | | | | | | | An ATA controller in native mode may have one or more channels disabled and not assigned resources. In that case the existing code crashes trying to access I/O ports 0-7. Add the neccessary check. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_via: PATA supportAlan2007-02-09
| | | | | Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* pata_sis: implement laptop list and add ASUS A6K/A6UJakub W. Jozwicki J2007-02-09
| | | | | | | | | | | | | In ASUS A6K/A6U hdd is connected to SiS 96x via 40c cable, however it is short cable and is UDMA66 capable. tj: fixed if () conditionals ah: fixed infinite loop Signed-off-by: Jakub W. Jozwicki <jakub007@go2.pl> Cc: Andreas Henriksson <andreas@fatal.se> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* ata_piix: add ICH7 on Acer 3682WLMi to laptop listJ J2007-02-09
| | | | | | | | | In Acer Aspire hdd is connected to ICH7 via 40c cable, however it is short cable and it is UDMA66 capable. Signed-off-by: J J <jakub007@go2.pl> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Add pci class code for SATA & AHCI, and replace some magic numbers.Conke Hu2007-02-09
| | | | | Signed-off-by: Conke Hu <conke.hu@amd.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: ATAPI supportMikael Pettersson2007-02-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds ATAPI support to the sata_promise driver. This has been tested on both first- and second-generation chips (20378 and 20575), and with both SATAPI and PATAPI devices. CD-writing works. SATAPI DMA works on second-generation chips, but on first-generation chips SATAPI is limited to PIO due to what appears to be HW limitations. PATAPI DMA works on both first- and second-generation chips, but requires the separate PATA support patch before it can be used on TX2plus chips. The functional changes to the driver are: - remove ATA_FLAG_NO_ATAPI from PDC_COMMON_FLAGS - add ->check_atapi_dma() operation to enable DMA for bulk data transfers but force PIO for other ATAPI commands; this filter is from Promise's driver and largely matches pata_pdc207x.c - use a more restrictive ->check_atapi_dma() on first-generation chips to force SATAPI to always use PIO - add handling of ATAPI protocols to pdc_qc_prep(), pdc_host_intr(), and pdc_qc_issue_prot(): ATAPI_DMA is handled by the driver while non-DMA protocols are handed over to libata generic code - add pdc_issue_atapi_pkt_cmd() to handle the initial steps in issuing ATAPI DMA commands before sending the actual CDB; this procedure was ported from Promise's driver Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* sata_promise: TX2plus PATA supportMikael Pettersson2007-02-09
| | | | | | | | | | | | | | | | | | This patch implements a simple way of setting up per-port flags on the SATA+PATA Promise TX2plus chips, which is a prerequisite for supporting the PATA port on those chips. It is based on the observation that ap->flags isn't really used until after ->port_start() has been invoked. So it places the "exceptional" per-port flags array in the driver's private host structure, and uses it in ->port_start() to finalise the port's flags. This patch obsoletes the #promise-sata-pata branch included in the #all branch. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] user of the jiffies rounding patch: ATA subsystemArjan van de Ven2007-02-09
| | | | | | | | | | | | This patch introduces users of the round_jiffies() function: ATA subsystem This delayed work is of the "about once a second" variety and can be rounded to coincide with other wakers. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [libata] trim trailing whitespaceJeff Garzik2007-02-09
| | | | | | Most of these contributed by that mysterious figger known as A.C. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] libata: Add support for the MPC52xx ATA controllerSylvain Munaut2007-02-09
| | | | | | | | This patch adds initial libata support for the Freescale MPC5200 integrated IDE controller. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] pata_it8213: Add new driver for the IT8213 cardAlan2007-02-09
| | | | | | | | | | | | | | | Add a driver for the IT8213 which is a single channel ICH-ish PATA controller. As it is very different to the IT8211/2 it gets its own driver. There is a legacy drivers/ide driver also available and I'll post that once I get time to test it all out (probably early January). If anyone else needs the drivers/ide driver and wants to do the merge for drivers/ide (Bart ??) then I'll forward it. [akpm@osdl.org: add PCI ID, constify needed_pio[]] Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* [PATCH] sata_sis: support SiS966/966LUwe Koziolek2007-02-09
| | | | | | | | | | | | The SiS966/966L has different PCI-IDs for native mode and AHCI mode. The SiS966 supports four SATA ports only in native mode. Added additional PCI-ID 0x0183 for SiS965/965L. this patch is based on the code from David Wang from SiS Corporation published on SiS Website. Signed-off-by: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2007-02-09
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: fix host device registering when nodemgr disabled ieee1394: video1394: DMA fix ieee1394: raw1394: prevent unloading of low-level driver ieee1394: dv1394: tidy up card removal ieee1394: dv1394: fix CardBus card ejection ieee1394: sbp2: lower block queue alignment requirement ieee1394: sbp2: remove bogus "emulated" host flag ieee1394: save one word in struct hpsb_host ieee1394: restore config ROM when resuming ieee1394: ohci1394: drop pcmcia-cs compatibility code ieee1394: nodemgr: check info_length in ROM header earlier the scheduled IEEE1394_OUI_DB removal the scheduled IEEE1394_EXPORT_FULL_API removal ieee1394: sbp2: use a better wildcard for blacklist Add PCI class ID for firewire OHCI controllers. ieee1394: modified csr1212_key_id_type_map to support lisight
| * ieee1394: fix host device registering when nodemgr disabledStefan Richter2007-02-08
| | | | | | | | | | | | | | | | | | | | | | Since my commit 8252bbb1363b7fe963a3eb6f8a36da619a6f5a65 in 2.6.20-rc1, host devices have a dummy driver attached. Alas the driver was not registered before use if ieee1394 was loaded with disable_nodemgr=1. This resulted in non-functional FireWire drivers or kernel lockup. http://bugzilla.kernel.org/show_bug.cgi?id=7942 Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
| * ieee1394: video1394: DMA fixDavid Moore2007-02-08
| | | | | | | | | | | | | | | | | | | | This together with the phys_to_virt fix in lib/swiotlb.c::swiotlb_sync_sg fixes video1394 DMA on machines with DMA bounce buffers, especially Intel x86-64 machines with > 3GB RAM. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: David Moore <dcm@acm.org> Tested-by: Nicolas Turro <Nicolas.Turro@inrialpes.fr>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-04 09:35:19 -0500