aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* pppoe: drop PPPOX_ZOMBIEs in pppoe_releaseXiaodong Xu2012-09-22
| | | | | | | | | | | When PPPOE is running over a virtual ethernet interface (e.g., a bonding interface) and the user tries to delete the interface in case the PPPOE state is ZOMBIE, the kernel will loop forever while unregistering net_device for the reference count is not decreased to zero which should have been done with dev_put(). Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* team: send port changed when addedJiri Pirko2012-09-22
| | | | | | | | | On some hw, link is not up during adding iface to team. That causes event not being sent to userspace and that may cause confusion. Fix this bug by sending port changed event once it's added to team. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driverPeter Hüwe2012-09-22
| | | | | | | | | | | | | | | | | | | Currently the driver has no MODULE_LICENSE attribute in its source which results in a kernel taint if I load this: root@(none):~# modprobe bcm87xx bcm87xx: module license 'unspecified' taints kernel. Since the first lines of the source code clearly state: * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this * archive for more details. I think it's safe to add the MODULE_LICENSE("GPL") macro and thus remove the kernel taint. Cc: stable@vger.kernel.org Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-09-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "More bug fixes, nothing gets past these guys" 1) More kernel info leaks found by Mathias Krause, this time in the IPSEC configuration layers. 2) When IPSEC policies change, we do not properly make sure that cached routes (which could now be stale) throughout the system will be revalidated. Fix this by generalizing the generation count invalidation scheme used by ipv4. From Nicolas Dichtel. 3) When repairing TCP sockets, we need to allow to restore not just the send window scale, but the receive one too. Extend the existing interface to achieve this in a backwards compatible way. From Andrey Vagin. 4) A fix for FCOE scatter gather feature validation erroneously caused scatter gather to be disabled for things like AOE too. From Ed L Cashin. 5) Several cases of mishandling of error pointers, from Mathias Krause, Wei Yongjun, and Devendra Naga. 6) Fix gianfar build, from Richard Cochran. 7) CAP_NET_* failures should return -EPERM not -EACCES, from Zhao Hongjiang. 8) Hardware reset fix in janz-ican3 CAN driver, from Ira W Snyder. 9) Fix oops during rmmod in ti_hecc CAN driver, from Marc Kleine-Budde. 10) The removal of the conditional compilation of the clk support code in the stmmac driver broke things. This is because the interfaces used are the ones that don't also perform the enable/disable of the clk. Fix from Stefan Roese. 11) The QFQ packet scheduler can record out of range virtual start times, resulting later in misbehavior and even crashes. Fix from Paolo Valente. 12) If MSG_WAITALL is used with IOAT DMA under TCP, we can wedge the receiver when the advertised receive window goes to zero. Detect this case and force the processing of the IOAT DMA queue when it happens to avoid getting stuck. Fix from Michal Kubecek. 13) batman-adv assumes that test_bit() returns only 0 or 1, but this is not true for x86 (which returns -1 or 0, via the 'sbb' instruction). Fix from Linus Lussing. 14) Fix small packet corruption in e1000, from Tushar Dave. 15) make_blackhole() in the IPSEC policy code can do one read unlock too many, fix from Li RongQing. 16) The new tcp_try_coalesce() code introduced a bug in TCP URG handling, fix from Eric Dumazet. 17) Fix memory leak in __netif_receive_skb() when doing zerocopy and when hit an OOM condition. From Michael S Tsirkin. 18) netxen blindly deferences pdev->bus->self, which is not guarenteed to be non-NULL. Fix from Nikolay Aleksandrov. 19) Fix a performance regression caused by mistakes in ipv6 checksum validation in the bnx2x driver, fix from Michal Schmidt. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net/stmmac: Use clk_prepare_enable and clk_disable_unprepare net: change return values from -EACCES to -EPERM net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() stmmac: fix return value check in stmmac_open_ext_timer() gianfar: fix phc index build failure ipv6: fix return value check in fib6_add() bnx2x: remove false warning regarding interrupt number can: ti_hecc: fix oops during rmmod can: janz-ican3: fix support for older hardware revisions net: do not disable sg for packets requiring no checksum aoe: assert AoE packets marked as requiring no checksum at91ether: return PTR_ERR if call to clk_get fails xfrm_user: don't copy esn replay window twice for new states xfrm_user: ensure user supplied esn replay window is valid xfrm_user: fix info leak in copy_to_user_tmpl() xfrm_user: fix info leak in copy_to_user_policy() xfrm_user: fix info leak in copy_to_user_state() xfrm_user: fix info leak in copy_to_user_auth() net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 tcp: restore rcv_wscale in a repair mode (v2) ...
| * net/stmmac: Use clk_prepare_enable and clk_disable_unprepareStefan Roese2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'fixes-for-3.6' of git://gitorious.org/linux-can/linux-canDavid S. Miller2012-09-21
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marc Kleine-Budde says: ==================== two patches for the v3.6 release cycle. Ira W. Snyder fixed support for the older version of the Janz CMOD-IO Carrier Board. I found and fixed an oops in the ti_hecc driver, which occurs when removing the module if the network interface is still open. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * can: ti_hecc: fix oops during rmmodMarc Kleine-Budde2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [<bf00c768>] lr : [<c033be58>] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [<bf00c768>] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [<c033be58>] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [<c033c098>] (rollback_registered_many+0xc0/0x2a0) from [<c033c2f8>] (rollback_registered+0x20/0x30) [ 172.994750] [<c033c2f8>] (rollback_registered+0x20/0x30) from [<c033c370>] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [<c033c370>] (unregister_netdevice_queue+0x68/0x98) from [<c033c3b8>] (unregister_netdev+0x18/0x20) [ 173.015899] [<c033c3b8>] (unregister_netdev+0x18/0x20) from [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [<bf00d3ac>] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [<c02842dc>] (platform_drv_remove+0x14/0x18) [ 173.036712] [<c02842dc>] (platform_drv_remove+0x14/0x18) from [<c0282f90>] (__device_release_driver+0x7c/0xbc) Cc: stable <stable@vger.kernel.org> Cc: Anant Gole <anantgole@ti.com> Tested-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: janz-ican3: fix support for older hardware revisionsIra W. Snyder2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable <stable@vger.kernel.org> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | net/irda: sh_sir: fix return value check in sh_sir_set_baudrate()Wei Yongjun2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | stmmac: fix return value check in stmmac_open_ext_timer()Wei Yongjun2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | gianfar: fix phc index build failureRichard Cochran2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | bnx2x: remove false warning regarding interrupt numberAriel Elior2012-09-21
| |/ | | | | | | | | | | | | | | | | | | | | | | Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * aoe: assert AoE packets marked as requiring no checksumEd Cashin2012-09-20
| | | | | | | | | | | | | | | | | | | | In order for the network layer to see that AoE requires no checksumming in a generic way, the packets must be marked as requiring no checksum, so we make this requirement explicit with the assertion. Signed-off-by: Ed Cashin <ecashin@coraid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * at91ether: return PTR_ERR if call to clk_get failsDevendra Naga2012-09-20
| | | | | | | | | | | | | | | | | | | | | | we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200Bjørn Mork2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * asix: Support DLink DUB-E100 H/W Ver C1Søren holm2012-09-19
| | | | | | | | | | | | Signed-off-by: Søren Holm <sgh@sgh.dk> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * e1000: Small packets may get corrupted during padding by HWTushar Dave2012-09-18
| | | | | | | | | | | | | | | | | | | | | | On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, packets may get corrupted during padding by HW. To WA this issue, pad all small packets manually. Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netxen: check for root bus in netxen_mask_aer_correctableNikolay Aleksandrov2012-09-18
| | | | | | | | | | | | | | | | | | | | Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: fix rx checksum validation for IPv6Michal Schmidt2012-09-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge branch 'for-davem' of ↵David S. Miller2012-09-17
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for the 3.6 stream. Arend van Spriel sends a simple thinko fix to correct a constant, preventing the setting of an invalid power level. Colin Ian King gives us a simple allocation failure check to avoid a NULL pointer dereference. Felix Fietkau sends another ath9k tx power patch, this time disabling a feature that has been reported to cause rx problems. Hante Meuleman provides a pair of endian fixes for brcmfmac. Larry Finger offers an rtlwifi fix that avoids a system lockup related to loading the wrong firmware for RTL8188CE devices. These have been in linux-next for a few days and I think they should be included in the final 3.6 kernel if possible. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * Merge branch 'master' of ↵John W. Linville2012-09-14
| | |\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | * brcmfmac: Fix big endian host configuration data.Hante Meuleman2012-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes big endian host configuration parameters. Cc: stable <stable@vger.kernel.org> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * brcmfmac: fix big endian bug in i-scan.Hante Meuleman2012-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssid len is 32 bit and needs endian conversion for big endian systems. Cc: stable <stable@vger.kernel.org> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * rtlwifi: rtl8192ce: Log message that B_CUT device may not workLarry Finger2012-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a number of problems that occur for the latest version of the Realtek RTL8188CE device with the in-kernel driver. These include selection of the wrong firmware, and system lockup. A full fix is known, but is too invasive for inclusion in stable. This patch fixes the problem with loading the wrong firmware, and logs a message that the device may not work for kernels 3.6 and older. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Anisse Astier <anisse@astier.eu> Cc: Li Chaoming <chaoming_li@realsil.com.cn> Tested-by: Anisse Astier <anisse@astier.eu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * brcm80211: fix missing allocation failure checkColin Ian King2012-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for oobirq_entry allocation failure to avoid NULL pointer dereferencing. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * ath9k: make PA linearization optional, disabled by default and fix checksFelix Fietkau2012-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * brcmsmac: fix mismatch in number of custom regulatory rulesArend van Spriel2012-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver provides the cfg80211 regulatory framework with a set of custom rules. However, there was a mismatch in number of rules and the actual rules provided. This resulted in setting an invalid power level: ieee80211 phy0: brcms_ops_config: change channel 13 ieee80211 phy0: brcms_ops_config: Error setting power_level (8758364) Closer look in cfg80211 regulatory blurb showed following bogus rule: cfg80211: 0 KHz - -60446948 KHz @ 875836468 KHz), (875836468 mBi, 875836468 mBm) Cc: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2012-09-21
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "Fixes for big 3 drivers: nouveau: revert earlier MBP fix, put a dmi based MBP fix in its place (fixes a regression we found on some Dell eDP panels doing some internal testing) radeon: revert pll fixes, real fix is too invasive, fix scratch leak intel: 3 minor fixes, one for HDMI audio." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau: add dmi quirk for gpio reset drm/radeon: Prevent leak of scratch register on resume from suspend Revert "drm/nv50-/gpio: initialise to vbios defaults during init" Revert "drm/radeon: rework pll selection (v3)" drm/i915: HDMI - Clear Audio Enable bit for Hot Plug drm/i915: Reduce a pin-leak BUG into a WARN drm/i915: enable lvds pin pairs before dpll on gen2
| * \ \ \ Merge branch 'drm-intel-fixes' of ↵Dave Airlie2012-09-21
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Essentially just flush my -fixes queue before I head off to xdc. - gen2 regression fixer, we've enabled the lvds stuff too late. Not causing any known issues, but this restores the sequence before a refactor that landed in 3.5, and lvds is a fickle beast. And seriously, who runs gen2 still ... - downgrade a BUG to a WARN - we haven't root-caused/fixed the underlying issue yet, but this should help bug reporters quite a bit. - properly disable hdmi audio - we've lost track of this, which resulted in the alsa driver again losing track of the unplug event. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: HDMI - Clear Audio Enable bit for Hot Plug drm/i915: Reduce a pin-leak BUG into a WARN drm/i915: enable lvds pin pairs before dpll on gen2
| | * | | | drm/i915: HDMI - Clear Audio Enable bit for Hot PlugWang Xingchao2012-09-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clear Audio Enable bit to trigger unsolicated event to notify Audio Driver part the HDMI hot plug change. The patch fixed the bug when remove HDMI cable the bit was not cleared correctly. In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will be set to trigger unsolicated event to notify Alsa driver the change. intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after remove the hdmi cable, here's debug log: [ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2 [ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0 so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this cause the eld infomation and pin presence doesnot update accordingly in alsa driver side. This patch will also trigger unsolicated event to alsa driver to notify the hot plug event: [ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1 [ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | drm/i915: Reduce a pin-leak BUG into a WARNChris Wilson2012-09-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pin-leaks persist and we get the perennial bug reports of machine lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that the object cannot be pinned at that time it should prevent the driver from locking up, and hopefully restore a semblance of working whilst still leaving us a OOPS to debug. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| | * | | | drm/i915: enable lvds pin pairs before dpll on gen2Daniel Vetter2012-09-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise things migt not work too well. Breakage introduced in commit eb1cbe4848b01f9f073064377875bc7d71eb401b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 28 23:12:16 2012 +0200 drm/i915: split PLL update code out of i9xx_crtc_mode_set Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | | | | drm/nouveau: add dmi quirk for gpio resetDave Airlie2012-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the gpio reset problem so the Retina MBP works, but avoids breaking the Dell systems. Ben will work on a better solution for 3.7. Tested by me on retina MBP. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2012-09-20
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes fixes a resume regression on pre-r6xx asics. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Prevent leak of scratch register on resume from suspend
| | * | | | | drm/radeon: Prevent leak of scratch register on resume from suspendSimon Kitching2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cards typically have 5-7 scratch registers; one of these is reserved for rdev->rptr_save_reg. Unfortunately the reservation is done in function r100_cp_init, which is called by all drivers except r600 - and this function is also invoked on resume from suspend. After several resumes, no scratch registers are free and graphics acceleration is disabled. Dmesg then reports either: *ERROR* radeon: cp failed to get scratch reg (-22). *ERROR* radeon: cp isn't working(-22). radeon 0000:01:00.0: failed initializing CP (-22). or: *ERROR* radeon: failed to get scratch reg (-22). *ERROR* radeon: failed testing IB on GFX ring (-22). *ERROR* ib ring test failed (-22). The chain of calls on boot for all except r600 is: radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init The chain of calls on resume for all except r600 is: rXXX_resume -> rXXX_startup -> r100_cp_init. R600 correctly allocates rptr_save_reg in r600_init (ie once only, not in resume). However moving the code into the init functions for all drivers means touching 4 drivers. So instead, this patch just adds a test in r100_cp_init to avoid reallocating on resume. As the rdev structure is allocated via kzalloc in radeon_driver_load_kms, and zero is not a valid registerid, zero safely implies not-yet-allocated. This issue appears to have been introduced in c7eff978 (3.6.0-rcN) Signed-off-by: Simon Kitching <skitching@vonos.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * | | | | | Revert "drm/nv50-/gpio: initialise to vbios defaults during init"Dave Airlie2012-09-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 991083ba60f89e717e3a4175be96d48a810e9eae. We discovered this causes problem on some Dell eDP laptops, so Apple lose out for now, I might try and whip up a dmi based workaround for 3.6 but I'm not sure I'll get time. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | | | | Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2012-09-20
| |\| | | | | | | |/ / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes The pll fix ended up causing some regressions. Drop it for 3.6. I've fixed it properly in 3.7, but the fix is too invasive for 3.6. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: Revert "drm/radeon: rework pll selection (v3)"
| | * | | | Revert "drm/radeon: rework pll selection (v3)"Alex Deucher2012-09-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 985f61f7ee647ad570c05eab0b74915da2ac8e19. This commit fixed certain cases, but ended up regressing others due to limitations in the current KMS API. A proper fix is too invasive for 3.6. Push it back to 3.7. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2012-09-21
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. Just a few driver updates mostly dealing with recent regressions." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: edt-ft5x06 - return -EFAULT on copy_to_user() error Input: sentelic - filter out erratic movement when lifting finger Input: ambakmi - [un]prepare clocks when enabling amd disabling Input: i8042 - disable mux on Toshiba C850D Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping" Input: imx_keypad - fix missing clk conversions Input: usbtouchscreen - initialize eGalax devices
| * | | | | | Input: edt-ft5x06 - return -EFAULT on copy_to_user() errorAxel Lin2012-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | copy_to_user() returns the number of bytes remaining, but we want a negative error code here. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | | | | | Input: sentelic - filter out erratic movement when lifting fingerTai-hwa Liang2012-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When lifing finger off the surface some versions of touchpad send movement packets with very low coordinates, which cause cursor to jump to the upper left corner of the screen. Let's ignore least significant bits of X and Y coordinates if higher bits are all zeroes and consider finger not touching the pad. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43197 Reported-and-tested-by: Aleksey Spiridonov <leks13@leks13.ru> Tested-by: Eddie Dunn <eddie.dunn@gmail.com> Tested-by: Jakub Luzny <limoto94@gmail.com> Tested-by: Olivier Goffart <olivier@woboq.com> Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | | | | | Input: ambakmi - [un]prepare clocks when enabling amd disablingPawel Moll2012-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clocks must be prepared before enabling and unprepared after disabling. Use appropriate functions to do this in one go. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | | | | | Input: i8042 - disable mux on Toshiba C850DAnisse Astier2012-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier <anisse@astier.eu> Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
| * | | | | | Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"Dmitry Torokhov2012-09-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit ca3b3faf9bee4dc5df4f10eae2d1e48f7de0a8ad. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | | Merge tag 'v3.6-rc5' into for-linusDmitry Torokhov2012-09-19
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync with mainline so that I can revert an input patch that came in through another subsystem tree.
| * | | | | | | Input: imx_keypad - fix missing clk conversionsFabio Estevam2012-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a1e636e6d3 (Input: imx_keypad - use clk_prepare_enable/ clk_disable_unprepare()) missed to update clk_enable/clk_disable in imx_keypad_probe(). Fix it so that we do not get clk warnings at boot. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | | | | | | Input: usbtouchscreen - initialize eGalax devicesForest Bond2012-09-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain eGalax devices expose an interface with class HID and protocol None. Some work with usbhid and some work with usbtouchscreen, but there is no easy way to differentiate. Sending an eGalax diagnostic packet seems to kick them all into using the right protocol for usbtouchscreen, so we can continue to bind them all there (as opposed to handing some off to usbhid). This fixes a regression for devices that were claimed by (and worked with) usbhid prior to commit 139ebe8dc80dd74cb2ac9f5603d18fbf5cff049f ("Input: usbtouchscreen - fix eGalax HID ignoring"), which made usbtouchscreen claim them instead. With this patch they will still be claimed by usbtouchscreen, but they will actually report events usbtouchscreen can understand. Note that these devices will be limited to the usbtouchscreen feature set so e.g. dual touch features are not supported. I have the distinct pleasure of needing to support devices of both types and have tested accordingly. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | | | | Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2012-09-21
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog fixes from Wim Van Sebroeck: "Fix a kdump issue in hpwdt and a possible NULL dereference." * git://www.linux-watchdog.org/linux-watchdog: watchdog: move the dereference below the NULL test hpwdt: Fix kdump issue in hpwdt
| * | | | | | | | watchdog: move the dereference below the NULL testWei Yongjun2012-09-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | | | | | | | hpwdt: Fix kdump issue in hpwdtToshi Kani2012-09-10
| | |/ / / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kdump can be interrupted by watchdog timer when the timer is left activated on the crash kernel. Changed the hpwdt driver to disable watchdog timer at boot-time. This assures that watchdog timer is disabled until /dev/watchdog is opened, and prevents watchdog timer to be left running on the crash kernel. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Tested-by: Lisa Mitchell <lisa.mitchell@hp.com> Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable <stable@vger.kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-10 07:30:59 -0500