aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* [PATCH] tpm_infineon: Support for new TPM 1.2 and PNPACPIMarcel Selhorst2005-08-05
| | | | | | | | | | | | | | | This patch includes support for the new Infineon Trusted Platform Module SLB 9635 TT 1.2 and does further include ACPI-support for both chip versions (SLD 9630 TT 1.1 and SLB9635 TT 1.2). Since the ioports and configuration registers are not correctly set on some machines, the configuration is now done via PNPACPI, which reads out the correct values out of the DSDT-table. Note that you have to have CONFIG_PNP, CONFIG_ACPI_BUS and CONFIG_PNPACPI enabled to run this driver (assuming that mainboards including a TPM do have the need for ACPI anyway). Signed-off-by: Marcel Selhorst <selhorst@crypto.rub.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds2005-08-05
|\
| * [SPARC]: Fix up sleep_on() removal in vfc driver.Christoph Hellwig2005-08-04
| | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | [PATCH] rtc: msleep() cannot be used from interruptPetr Vandrovec2005-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the beginning of July my Opteron box was randomly crashing and being rebooted by hardware watchdog. Today it finally did it in front of me, and this patch will hopefully fix it. The problem is that at the end of June (the 28th, to be exact: commit 47f176fdaf8924bc83fddcf9658f2fd3ef60d573, "[PATCH] Using msleep() instead of HZ") rtc_get_rtc_time was converted to use msleep() instead of busy waiting. But rtc_get_rtc_time is used by hpet_rtc_interrupt, and scheduling is not allowed during interrupt. So I'm reverting this part of original change, replacing msleep() back with busy loop. The original code was busy waiting for up to 20ms, but on my hardware in the worst case update-in-progress bit was asserted for at most 363 passes through loop (on 2GHz dual Opteron), much less than even one jiffie, not even talking about 20ms. So I changed code to just wait only as long as necessary. Otherwise when RTC was set to generate 8192Hz timer, it stopped doing anything for 20ms (160 pulses were skipped!) from time to time, and this is rather suboptimal as far as I can tell. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] USB: Fix setup packet initialization in isp116x-hcdOlav Kongas2005-08-05
| | | | | | | | | | | | | | | | | | | | When recently addressing remarks by Alexey Dobriyan about the isp116x-hcd, I introduced a bug in the driver. Please apply the attached patch to fix it. Signed-off-by: Olav Kongas <ok@artecdesign.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] USB: ehci: microframe handling fixDavid Brownell2005-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has a one line oops fix, plus related cleanups. - The bugfix uses microframe scheduling data given to the hardware to test "is this a periodic QH", rather than testing for nonzero period. (Prevents an oops by providing the correct answer.) - The cleanup going along with the patch should make it clearer what's going on whenever those bitfields are accessed. The bug came about when, around January, two new kinds of EHCI interrupt scheduling operation were added, involving both the high speed (24 KBytes per millisec) and low/full speed (1-64 bytes per millisec) microframe scheduling. A driver for the Edirol UA-1000 Audio Capture Unit ran into the oops; it used one of the newly supported high speed modes. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] USB: ub documentation updatePete Zaitcev2005-08-05
| | | | | | | | | | | | | | | | | | | | The patch which went in was correct, but not quite what I had in mind. Here is a patch to update that a little bit. Original patch is at: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=4749f32da939d4e4160541b2cadc22492bb507ec Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] pci and yenta: pcibios_bus_to_resourceDominik Brodowski2005-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In yenta_socket, we default to using the resource setting of the CardBus bridge. However, this is a PCI-bus-centric view of resources and thus needs to be converted to generic resources first. Therefore, add a call to pcibios_bus_to_resource() call in between. This function is a mere wrapper on x86 and friends, however on some others it already exists, is added in this patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where is its pcibios_resource_to_bus() ?). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] PCI: restore BAR values after D3hot->D0 for devices that need itJohn W. Linville2005-08-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some PCI devices (e.g. 3c905B, 3c556B) lose all configuration (including BARs) when transitioning from D3hot->D0. This leaves such a device in an inaccessible state. The patch below causes the BARs to be restored when enabling such a device, so that its driver will be able to access it. The patch also adds pci_restore_bars as a new global symbol, and adds a correpsonding EXPORT_SYMBOL_GPL for that. Some firmware (e.g. Thinkpad T21) leaves devices in D3hot after a (re)boot. Most drivers call pci_enable_device very early, so devices left in D3hot that lose configuration during the D3hot->D0 transition will be inaccessible to their drivers. Drivers could be modified to account for this, but it would be difficult to know which drivers need modification. This is especially true since often many devices are covered by the same driver. It likely would be necessary to replicate code across dozens of drivers. The patch below should trigger only when transitioning from D3hot->D0 (or at boot), and only for devices that have the "no soft reset" bit cleared in the PM control register. I believe it is safe to include this patch as part of the PCI infrastructure. The cleanest implementation of pci_restore_bars was to call pci_update_resource. Unfortunately, that does not currently exist for the sparc64 architecture. The patch below includes a null implemenation of pci_update_resource for sparc64. Some have expressed interest in making general use of the the pci_restore_bars function, so that has been exported to GPL licensed modules. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds2005-08-04
|\ \
| * | [SCSI] fix aic7xxx performance issues since 2.6.12-rc2James Bottomley2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several people noticed we dropped quite a bit on benchmark figures. OK, it was my fault but unfortunately I discovered I ran out of brown paper bags a while ago and forgot to reorder them. The issue is that a construct introduced in the conversion of the driver to use the transport class keyed off whether the block request was tagged or not. However, the aic7xxx driver doesn't properly set up the block layer TCQ (it uses the wrong API), so the driver now things all requests are untagged and we keep it to a queue depth of a single element. Oops. The fix is to use the correct TCQ API. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] aic7xxx: final fixes for DT handlingJames Bottomley2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | The aic7xxx can support Data Group transfers at periods > 12.5, so eliminate that restriction. Additionally wide is a requirement for DT so ensure wide is set if users request DT. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] Fix SCSI tape oops at module removalKai Makisara2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removing the SCSI tape module results in an oops in class_device_destroy if any devices are present. The patch at the end of this message fixes the bug by moving class_destroy() later in exit_st() so that the class still exists when devices are removed. (The bug is old but class_simple_device_remove() did nothing when the class did not exist.) The patch also fixes a "class leak" in init_st() error path. I would like to get this into 2.6.13 but it may be too late? Signed-off-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] ServeRAID V7.12.02Jack Hammer2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | I am resubmitting the 2.6 kernel patch for the Version 7.12.02 ips driver. I have eliminated a couple of inappropriate changes pointed out by Arjan. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] aic7xxx: fix bug in DT handingJames Bottomley2005-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basically DT isn't reported or handled at all. The problem is that lines of code like this: spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ; don't do what you think they do when spi_dt is a single bit variable. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] fc4 warning fixAndrew Morton2005-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/fc4/fc.c: In function `fcp_scsi_dev_reset': drivers/fc4/fc.c:933: warning: control reaches end of non-void function Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * | [SCSI] scsi/ibmvscsi/srp.h: Fix a wrong type code used for SRP_LOGIN_REJLinda Xie2005-07-30
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes srp.h which uses 0x80 for SRP_LOGIN_REJ instead of 0xc2. Signed-off-by: Linda Xie <lxie@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | | [PATCH] dm-raid locking fixAlasdair G Kergon2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | This code was never designed to handle more than one instance of do_work() running at once. Signed-Off-By: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] md: make sure md bitmap updates are flushed when array is stopped.NeilBrown2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent change to never ignore the bitmap, revealed that the bitmap isn't begin flushed properly when an array is stopped. We call bitmap_daemon_work three times as there is a three-stage pipeline for flushing updates to the bitmap file. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] md: yet another attempt to get bitmap-based resync to do the right ↵NeilBrown2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | thing in all cases... Firstly, R1BIO_Degraded was being set in a number of places in the resync code, but is never used there, so get rid of those settings. Then: When doing a resync, we want to clear the bit in the bitmap iff the array will be non-degraded when the sync has completed. However the current code would clear the bitmap if the array was non-degraded when the resync *started*, which obviously isn't right (it is for 'resync' but not for 'recovery' - i.e. rebuilding a failed drive). This patch calculated 'still_degraded' and uses the to tell bitmap_start_sync whether this sync should clear the corresponding bit. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] md: always honour md bitmap being read from diskNeilBrown2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code currently will ignore the bitmap if the array seem to be in-sync. This is wrong if the array is degraded, and probably wrong anyway. If the bitmap says some chunks are not in in-sync, and the superblock says everything IS in sync, then something is clearly wrong, and it is safer to trust the bitmap. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] md: make 'md' and alias for 'md-mod'NeilBrown2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Until the bitmap code was added, modprobe md would load the md module. But now the md module is called 'md-mod', so we really need an alias for backwards comparability. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] md: remove a stray debugging printk.NeilBrown2005-08-04
| | | | | | | | | | | | | | | | | | Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] v4l: oopsfix for BTTV on badly behaved PCI chipsetsMauro Carvalho Chehab2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | no_overlay bttv parameter implemented to fix OOPS on some PCI chipsets (like some VIA) with these behaviors: 1) If pci_quicks does identify the chip as having troubles to handle PCI2PCI transfers, no_overlay defaults to 1. The user may force it to 0, to reenable (not recommended). 2) For newer chipsets not blacklisted, no_overlay=1 is provided as a workaround until PCI chipset included on /drivers/pci/quirks.c Thanks to Bodo Eggert <7eggert@gmx.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | [PATCH] ide: fix kmalloc_node breakage in ide driverRavikiran G Thirumalai2005-08-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch fixes oops caused by ide interfaces not on pci. pcibus_to_node causes the kernel to crash otherwise. Patch also adds a BUG_ON to check if hwif is NULL. Signed-off-by: Christoph Lameter <christoph@lameter.com> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Cc: Andi Kleen <ak@muc.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/to-linusLinus Torvalds2005-08-04
|\ \ \
| * \ \ Merge ../to-linus-stableLen Brown2005-08-03
| |\ \ \
| | * \ \ /home/lenb/src/to-linus-stable branch 'acpi-2.6.12'Len Brown2005-08-03
| | |\ \ \
| | | * | | [ACPI] delete Warning: Encountered executable code at module level, ↵Len Brown2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [AE_NOT_CONFIGURED] http://bugzilla.kernel.org/show_bug.cgi?id=4923 Signed-off-by: Len Brown <len.brown@intel.com>
| * | | | | [ACPI] S3 resume: avoid kmalloc() might_sleep oops symptomDavid Shaohua Li2005-08-03
| |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume. http://bugzilla.kernel.org/show_bug.cgi?id=3469 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | | Merge head 'for-linus' of ↵Linus Torvalds2005-08-04
|\ \ \ \ \ | |_|_|_|/ |/| | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
| * | | | [PATCH] [IPoIB] Handle sending of unicast RARP responsesHal Rosenstock2005-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RARP replies are another valid case where IPoIB may need to send a unicast packet with no neighbour structure. Signed-off-by: Hal Rosenstock <halr@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | | | [PATCH] [IB/cm]: Correct CM port redirect reject codesRoland Dreier2005-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reject code 24 is port and CM redirection, not just port redirection. Port redirection alone is code 25. Therefore we should rename code 24 to IB_CM_REJ_PORT_CM_REDIRECT and use IB_CM_REJ_PORT_REDIRECT for code 25. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | | | Merge master.kernel.org:/pub/scm/linux/kernel/git/lenb/to-linusLinus Torvalds2005-08-03
|\ \ \ \ \ | | |/ / / | |/| | |
| * | | | /home/lenb/src/to-linus branch 'acpi-2.6.12'Len Brown2005-08-03
| |\ \ \ \ | | | |/ / | | |/| |
| | * | | [ACPI] CONFIG_ACPI_HOTKEY is now "n" by defaultLuming Yu2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 2.6.12 behaviour, this (EXPERIMENTAL) driver should not be built. Update the driver source with latest from Luming. Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | [ACPI] restore /proc/acpi/button/ (ala 2.6.12)Alexey Starikovskiy2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by Len Brown <len.brown@intel.com>
| | * | | [ACPI] revert Embedded Controller to polling-mode by default (ala 2.6.12)Luming Yu2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Burst mode isn't ready for prime time, but can be enabled for test via "ec_burst=1" Signed-off-by: Luming Yu <luming.yu@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | [ACPI] PCI interrupt link suspend/resume - revert to 2.6.12 behaviourDavid Shaohua Li2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch disables the PCI Interrupt Link refernece counts, which should not co-exist with the 2.6.12 irq_router.resume method or else a double acpi_pci_link_set() could result on resume. Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | * | | [ACPI] fix 64-bit build warning in processor_idle.cLen Brown2005-08-03
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Len Brown <len.brown@intel.com>
* | | | | [PATCH] ARM: 2833/2: Remove support for WDIOF_MAGICCLOSE from sa1100-wdtIan Campbell2005-08-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch from Ian Campbell On PXA255 there is no way to disable the watchdog. Turning off OIER[E3] as suggested in the existing comment does not work. I posted a note to the ARM mailing list a little while ago asking for opinions from people using SA1100. There was one reponse from Nico who believes that the SA1100 is the same as the PXA255 in this respect. You also asked me to involve the watchdog maintainer which I tried to do but didn't hear anything back. There are only a couple of other drivers which can't stop the watchdog and there seems to be no consistancy regarding printing an error etc. I decided to print something since that matches the case for all the other drivers when NOWAYOUT is turned on. Also, I changed the device .name to "watchdog" like most of the other watchdogs. udev uses it as the device name (by default) and spaces etc. get in the way. Superceded 2833/1 because 2.6.13-rc4 caused rejects. Signed-off-by: Ian Campbell <icampbell@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | | [PATCH] ACPI: increase PCIBIOS_MIN_IO on x86Ivan Kokshaysky2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have increased PCIBIOS_MIN_IO to 0x4000, but still want motherboard resources to be allocated properly. So we need to state 0x1000 (according to the comment) limit explicitely. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | pci: make bus resource start address override minimum IO addressLinus Torvalds2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reason we have PCIBIOS_MIN_IO and PCIBIOS_MIN_CARDBUS_IO is because we want to protect badly documented motherboard PCI resources and thus don't want to allocate new resources in low IO/MEM space. However, if we have already discovered a PCI bridge with a specified resource base, that should override that decision. This change will allow us to move the "careful" region upwards without resulting in problems allocating resources in low mappings. This was brought on by us having allocated a bus resource at 0x1000, conflicting with a undocumented VAIO Sony PI resources.
* | | | | [PATCH] cfq-iosched: fix problem with barriers and max_depth == 1Jens Axboe2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CFQ will currently stall when using write barriers and the default max_depth setting of 1, since we artificially need a depth of 2 when pre-pending the first flush. So never deny the barrier request going to the device. This is a regression since 2.6.12, it was found in SUSE testing. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | [PATCH] aic byteorder fixes after recent cleanupOlaf Hering2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rebuild the aic7xxx firmware doesn't work anymore after this change which appeared int 2.6.13-rc1: [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft Two files did not include byteorder.h, resulting in aic dying with a panic "Unknown opcode encountered in seq program" This fixes it for me. Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | | [PATCH] Obvious bugfix for yenta resource allocationPaul Mackerras2005-08-02
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent changes (well, dating from 12 July) have broken cardbus on my powerbook: I get 3 messages saying "no resource of type xxx available, trying to continue", and if I plug in my wireless card, it complains that there are no resources allocated to the card. This all worked in 2.6.12. Looking at the code in yenta_socket.c, function yenta_allocate_res, it's obvious what is wrong: if we get to line 639 (i.e. there wasn't a usable preassigned resource), we will always flow through to line 668, which is the printk that I was seeing, even if a resource was successfully allocated. It looks to me as though there should be a return statement after the two config_writel's in each of the 3 branches of the if statements, so that the function returns after successfully setting up the resource. The patch below adds these return statements, and with this patch, cardbus works on my powerbook once again. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] v4l: bug fix to correct tea5767 autodetectionMauro Carvalho Chehab2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch does correct radio chip autodetection to avoid misdetecting mt20xx microtune as tea5767 chip. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] aacraid: Fix for controller load based timeoutsMark Haverkamp2005-08-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Martin Drab found that he could get aacraid timeouts with high load on his controller / disk drive combinations. After some experimentation Mark Salyzyn has come up with a patch to reduce the default max_sectors to something that will keep the controller from being overloaded and will eliminate the timeout issues. Signed-off-by: Mark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Mark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] silence cs89x0Denis Vlasenko2005-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cs89x0 talks a lot at boot. Seems like debug leftover. This patch downgrades printks to KERN_DEBUG. While we're at it, make these messages a bit less obscure. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] md: make sure raid5/raid6 resync uses correct 'max_sectors'NeilBrown2005-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default resync_max_sector is set to "mddev->size << 1". If the raid-personality-module updates mddev->size, it must update resync_max_sectors too. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>