aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* USB: Fix duplicate sysfs problem after device reset.Sarah Sharp2010-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add speed values for USB 3.0 and wireless controllersGreg Kroah-Hartman2010-01-20
| | | | | | | | | | | | These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: Kurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add missing delay during remote wakeupAlan Stern2010-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI & UHCI: fix race between root-hub suspend and port resumeAlan Stern2010-01-20
| | | | | | | | | | | | | | | This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: EHCI: fix handling of unusual interrupt intervalsAlan Stern2010-01-20
| | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1320) fixes two problems related to interrupt-URB scheduling in ehci-hcd. URBs with an interval of 2 or 4 microframes aren't handled. For the time being, the patch reduces to interval to 1 uframe. URBs are constrained to have an interval no larger than 1024 frames by usb_submit_urb(). But some EHCI controllers allow use of a schedule as short as 256 frames; for these controllers we may have to decrease the interval to the actual schedule length. The second problem isn't very significant since few devices expose interrupt endpoints with an interval larger than 256 frames. But the first problem is critical; it will prevent the kernel from working with devices having interrupt intervals of 2 or 4 uframes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Glynn Farrow <farrowg@sg.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Don't use GFP_KERNEL while we cannot reset a storage deviceOliver Neukum2010-01-20
| | | | | | | | | | | | | Memory allocations with GFP_KERNEL can cause IO to a storage device which can fail resulting in a need to reset the device. Therefore GFP_KERNEL cannot be safely used between usb_lock_device() and usb_unlock_device(). Replace by GFP_NOIO. Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix bitmask merge errorAlan Stern2010-01-20
| | | | | | | | | | This patch adds a mask bit which was mistakenly omitted from the as1311 patch (usb-storage: add BAD_SENSE flag). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: serial: fix memory leak in generic driverJohan Hovold2010-01-20
| | | | | | | | | | | | | | | | | Fix a regression introduced by commit 715b1dc01fe44537e8fce9566e4bb48d6821d84b ("USB: usb_debug, usb_generic_serial: implement multi urb write"). URB transfer buffer was never freed when using multi-urb writes. Currently the only driver enabling multi-urb writes is usb_debug. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Greg KH <greg@kroah.com> Acked-by: Jason Wessel <jason.wessel@windriver.com> Cc: stable <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: fix USB serial fix kfifo_len lockingStefani Seibold2010-01-20
| | | | | | | | | | | This patch fix a possible race bug in drivers/usb/serial/generic with the new kfifo API. Please apply it to the 2.6.33-rc* tree. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2010-01-18
|\ | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDs
| * [WATCHDOG] iTCO_wdt: Add Intel Cougar Point and PCH DeviceIDsSeth Heasley2010-01-18
| | | | | | | | | | | | | | | | This patch adds the Intel Cougar Point and PCH DeviceIDs for iTCO Watchdog. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-01-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Unlock mc13783 before subsystems initialisation, at probe time. mfd: WM835x GPIO direction register is not locked mfd: tmio_mmc hardware abstraction for CNF area mfd: WM8350 off by one bug mfd: Correct WM835x ISINK ramp time defines
| * | mfd: Unlock mc13783 before subsystems initialisation, at probe time.Alberto Panizzo2010-01-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | With this, mc13783 subsystems drivers can configure the mc13783 chip reading and writing registers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: WM835x GPIO direction register is not lockedMark Brown2010-01-18
| | | | | | | | | | | | | | | | | | | | | | | | No need to set the security key when writing to it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: tmio_mmc hardware abstraction for CNF areaIan Molton2010-01-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch abstracts out the CNF area code from tmio_mmc which is not present in all hardware that can use this driver. This is required so that we can support non-toshiba based hardware. ASIC3 support by Philipp Zabel Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: WM8350 off by one bugDan Carpenter2010-01-18
| |/ | | | | | | | | | | | | | | If irq == WM8350_NUM_IRQ that would put us past the end of the array. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Merge branch 'merge' of ↵Linus Torvalds2010-01-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Move cpu hotplug driver lock from pseries to powerpc powerpc: Move /proc/ppc64 to /proc/powerpc update powerpc/8xx: Fix user space TLB walk in dcbX fixup powerpc: Fix decrementer setup on 1GHz boards powerpc/iseries: Initialise on-stack completion powerpc/hvc: Driver build breaks with !HVC_CONSOLE serial/pmac_zilog: Workaround problem due to interrupt on closed port powerpc/macintosh: Make Open Firmware device id constant powerpc: Use helpers for rlimits powerpc: cpumask_of_node() should handle -1 as a node powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE powerpc/pseries: Fix xics interrupt affinity powerpc/swsusp_32: Fix TLB invalidation powerpc/8xx: Always pin kernel instruction TLB powerpc: 2.6.33 update of defconfigs for embedded 6xx/7xxx, 8xx, 8xxx powerpc: Use scripts/mkuboot.sh instead of 'mkimage' powerpc/5200: update defconfigs
| * | powerpc/hvc: Driver build breaks with !HVC_CONSOLEKamalesh Babulal2010-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi Stephen, next-20090925 randconfig build breaks on hvcs driver on powerpc, with HVC_CONSOLE=n. ERROR: ".hvc_put_chars" [drivers/char/hvcs.ko] undefined! ERROR: ".hvc_get_chars" [drivers/char/hvcs.ko] undefined! adding the dependency of HVC_CONSOLE helped Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | serial/pmac_zilog: Workaround problem due to interrupt on closed portBenjamin Herrenschmidt2010-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that in qemu, we can see an interrupt in R3 despite the fact that it's masked in W1. The chip doesn't actually issue an interrupt, but we can "see" it when taking an interrupt for the other channel. This may be a qemu bug ... or not, so let's be safe and avoid calling into the UART layer when that happens which woulc cause a crash. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Rob Landley <rob@landley.net>
| * | powerpc/macintosh: Make Open Firmware device id constantMárton Németh2010-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The match_table field of the struct of_device_id is constant in <linux/of_platform.h> so it is worth to make the initialization data also constant. The semantic match that finds this kind of pattern is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ disable decl_init,const_decl_init; identifier I1, I2, x; @@ struct I1 { ... const struct I2 *x; ... }; @s@ identifier r.I1, y; identifier r.x, E; @@ struct I1 y = { .x = E, }; @c@ identifier r.I2; identifier s.E; @@ const struct I2 E[] = ... ; @depends on !c@ identifier r.I2; identifier s.E; @@ + const struct I2 E[] = ...; // </smpl> Signed-off-by: Márton Németh <nm127@freemail.hu> Cc: Julia Lawall <julia@diku.dk> Cc: cocci@diku.dk Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | Merge branch 'mantis' of ↵Linus Torvalds2010-01-18
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'mantis' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (117 commits) V4L/DVB (13851): Fix Input dependency for Mantis V4L/DVB(13824a): mantis: Fix __devexit bad annotations V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32) V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cards V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister functions V4L/DVB (13812): [Mantis/Hopper] Update Copyright header V4L/DVB (13811): [MB86A16] Update Copyright header V4L/DVB (13810): [MB86A16] Use DVB_* macros V4L/DVB (13809): Fix Checkpatch violations V4L/DVB (13807): Fix: Free device in the device registration failure case V4L/DVB (13806): Register and Initialize Remote control V4L/DVB (13805): Fix: Unregister the frontend before detaching V4L/DVB (13804): Remove unused I2C Adapter ID V4L/DVB (13803): Remove unused dependency on CU1216 V4L/DVB (13802): [Mantis/Hopper] Fix all build related warnings V4L/DVB (13801): [MB86A16] Use the search callback V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser than 1mS. V4L/DVB (13799): [Mantis] Unregister frontend V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on relevant devices V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul, ...
| * | | V4L/DVB (13851): Fix Input dependency for MantisManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | > > > > CONFIG_INPUT=n As reported by Randy Dunlap <randy.dunlap@oracle.com>: > ERROR: "ir_input_register" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_unregister" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "ir_input_init" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_free_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! > ERROR: "input_allocate_device" [drivers/media/dvb/mantis/mantis_core.ko] undefined! Signed-off-by: Manu Abraham <manu@linuxtv.org> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB(13824a): mantis: Fix __devexit bad annotationsMauro Carvalho Chehab2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x13d7): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x1433): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x185e): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/mantis/built-in.o(.devinit.text+0x18ba): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x68b8): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6914): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d3f): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/dvb/built-in.o(.devinit.text+0x6d9b): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14634): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14690): Section mismatch in reference from the function mantis_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit mantis_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14abb): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_i2c_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_i2c_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_i2c_exit() so it may be used outside an exit section. WARNING: drivers/media/built-in.o(.devinit.text+0x14b17): Section mismatch in reference from the function hopper_pci_probe() to the function .devexit.text:mantis_pci_exit() The function __devinit hopper_pci_probe() references a function __devexit mantis_pci_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of mantis_pci_exit() so it may be used outside an exit section. Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13808b): mantis: replace DMA_nnBIT_MASK to DMA_BIT_MASK(32)Mauro Carvalho Chehab2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/media/dvb/mantis/mantis_pci.c: In function ‘mantis_pci_init’: drivers/media/dvb/mantis/mantis_pci.c:76: warning: ‘DMA_nnBIT_MASK’ is deprecated Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13808): [Mantis/Hopper] Build update for Mantis/Hopper based cardsManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB(13808a): mantis: convert it to the new ir-core register/unregister ↵Mauro Carvalho Chehab2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | functions Fix a merge conflict between mantis and IR cleanups Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13812): [Mantis/Hopper] Update Copyright headerManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13811): [MB86A16] Update Copyright headerManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13810): [MB86A16] Use DVB_* macrosManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13809): Fix Checkpatch violationsManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13807): Fix: Free device in the device registration failure caseManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13806): Register and Initialize Remote controlManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13805): Fix: Unregister the frontend before detachingManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13804): Remove unused I2C Adapter IDManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13803): Remove unused dependency on CU1216Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thanks to Matthias Wachter <mathias@waechter.wiz.at> for pointing it out. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13802): [Mantis/Hopper] Fix all build related warningsManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13801): [MB86A16] Use the search callbackManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13800): [Mantis] I2C optimization. Required delay is much lesser ↵Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | than 1mS. Do not wait, keep looping instead. Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13799): [Mantis] Unregister frontendManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13798): [Mantis] Enable power for all cards, use byte mode only on ↵Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | relevant devices Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13797): [Mantis/Hopper/TDA665x] Large overhaul,Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Initial go at VP-3028, VP-3030 devices. * I2C communication improvements, * Add TDA665x support Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13796): [Mantis] Add missing file in previous commitManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the ↵Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PCI ID list Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13794): [Mantis/VP-3028] Initial go at Serial interface ↵Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | implementation, add support for VP-3028 Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13792): [Mantis/VP-2033] Do not claim TDA10023Niklas Edmundsson2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not rely on the PCI ID alone Signed-off-by: Niklas Edmundsson <nikke@acc.umu.se> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13791): [TDA10021] Do not claim TDA10023Niklas Edmundsson2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Niklas Edmundsson <nikke@acc.umu.se> Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13790): [Mantis] Relocate queue initializationManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13789): [Mantis CA] Initialize the mutexManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13788): [Mantis CA] use a lock for the relevant CI Read/Write ↵Manu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | operations Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | V4L/DVB (13787): [Mantis] Fix buildManu Abraham2010-01-17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-23 15:09:09 -0500