aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* netxen: Fix interrupt handling for multiport adaptersdhananjay@netxen.com2007-07-30
| | | | | | | | | This patch fixes masking of interrupts on multiport adapters. Also disables interrupts upon ifdown interface. The wrong mask could result in interrupt flood after interface is down. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* netxen: re-init station address after h/w initdhananjay@netxen.com2007-07-30
| | | | | | | | | This is a workaround for firmware bug with 2nd port of multiport adapter, where MAC address is reset. Driver just needs to overwrite it with the value read from PROM. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* forcedeth: mac address correctAyaz Abdulla2007-07-30
| | | | | | | | | | | In older chipsets, the mac address was stored in reversed order. However, in newer chipsets, the mac address is in correct order. This patch takes those newer chipsets into account and does not rely on a special bit setup by BIOS'. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* gfar: Fix modpost warningKumar Gala2007-07-30
| | | | | | | | | Fix the following modpost warning: WARNING: vmlinux.o(.init.text+0x1aa6c): Section mismatch: reference to .exit.text:gfar_mdio_exit (between 'gfar_init' and 'gfar_mdio_init') Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* lib8390: comment on locking by Alan CoxJarek Poplawski2007-07-30
| | | | | | | | | | Additional explanation of problems with locking by Alan Cox. Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Fix a potential NULL pointer dereference in write_bulk_callback() in ↵Micah Gruber2007-07-30
| | | | | | | | | | | drivers/net/usb/pegasus.c This patch fixes a potential null dereference bug where we dereference pegasus before a null check. This patch simply moves the dereferencing after the null check. Signed-off-by: Micah Gruber <micah.gruber@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
* Merge branch 'master' of ↵Linus Torvalds2007-07-30
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix show_stack() when stack argument is NULL. [SPARC]: Fix serial console node string creation. [SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.c [SPARC64]: asm-sparc64/floppy.h needs linux/pci.h [SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling. [VIDEO]: Fix OOPS in all SBUS framebuffer drivers. [SPARC64]: Handle mostek clock type in mini_rtc driver. [PARTITION]: Sun/Solaris VTOC table corrections [SPARC]: Fix floppy on some sun4c systems. [SPARC64]: Fix sun4u PCI config space accesses on sun4u. [PARTITION] MSDOS: Fix Sun num_partitions handling. [SPARC]: Update defconfig.
| * [SPARC]: Mark SBUS framebuffer ioctls as IGNORE in compat_ioctl.cDavid S. Miller2007-07-30
| | | | | | | | | | | | | | | | They are handled in a ->compat_ioctl() handler, so it's just noise when compat_ioctl.c warns which occurs when they are used on non-SBUS framebuffer devices. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [SPARC64]: Fix conflicts in SBUS/PCI/EBUS/ISA DMA handling.David S. Miller2007-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fully unify all of the DMA ops so that subordinate bus types to the DMA operation providers (such as ebus, isa, of_device) can work transparently. Basically, we just make sure that for every system device we create, the dev->archdata 'iommu' and 'stc' fields are filled in. Then we have two platform variants of the DMA ops, one for SUN4U which actually programs the real hardware, and one for SUN4V which makes hypervisor calls. This also fixes the crashes in parport_pc on sparc64, reported by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
| * [VIDEO]: Fix OOPS in all SBUS framebuffer drivers.David S. Miller2007-07-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of these drivers use a silly: struct all_info { struct fb_info info; struct foo_par par; }; struct all_info *all = kzalloc(sizeof(*all), GFP_KERNEL); all->info.par = &all->par; etc. etc. code sequence, basically replicating the provided framebuffer_alloc()/framebuffer_release(), and doing it badly. Not only is this massive code duplication, it also caused a bug in that we weren't setting the fb_info->device pointer which results in an OOPS when fb_is_primary_device() runs. Fix all of this by using framebuffer_{alloc,release}() and passing in "&of_device->dev" as the device pointer. Signed-off-by: David S. Miller <davem@davemloft.net>
* | setup and detect 2nd phy on MCF5275 in FEC driverMike Cruse2007-07-30
| | | | | | | | | | | | | | Added code to recognize the second interface on M5275 boards. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | clean up reading of ICR register in FEC driverGreg Ungerer2007-07-30
| | | | | | | | | | | | | | | | | | On the MCF5272, there is no need to read the ICR before writing it : the bit 4n+3 is a write-enable for the bits 4n,4n+1 and 4n+2. Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | fix work queues in FEC driverGreg Ungerer2007-07-30
| | | | | | | | | | | | | | Fix the work queue code in the FEC driver. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | remove unused config symbol from FEC driverGreg Ungerer2007-07-30
| | | | | | | | | | | | | | | | Removed unused CONFIG symbol and its conditional code from FEC driver. Pointed out by Robert P. J. Day <rpjday@mindspring.com>. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | include cacheflush.h in FEC driverGreg Ungerer2007-07-30
|/ | | | | | | | Include cacheflush.h to get definitions for cache functions used in this code. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Make lguest compile with CONFIG_BLOCK=n and CONFIG_NET=nRusty Russell2007-07-29
| | | | | | | | | | | Gabriel C reports lguest doesn't compile with CONFIG_BLOCK=n. Fix this by introducing a config var for the block device, which depends on LGUEST && BLOCK. Do the same for the net driver, rather then depending gratuitously on CONFIG_NET. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Gabriel C <nix.or.die@googlemail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2007-07-29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (28 commits) [SCSI] mpt fusion: Changes in mptctl.c for logging support [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for logging support [SCSI] mpt fusion: Changes in mptscsih.c for logging support [SCSI] mpt fusion: Changes in mptbase.c for logging support [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and addition of mptdebug.h [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events() [SCSI] bsg: Fix build for CONFIG_BLOCK=n [SCSI] aacraid: fix Sunrise Lake reset handling [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checking [SCSI] add easyRAID to the no report luns blacklist [SCSI] advansys: lindent and other large, uninteresting changes [SCSI] aic79xx, aic7xxx: Fix incorrect width setting [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributes [SCSI] aacraid: draw line in sand, sundry cleanup and version update [SCSI] iscsi_tcp: Turn off bounce buffers [SCSI] libiscsi: fix cmd seqeunce number checking [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host template [SCSI] libiscsi: make sure session is not blocked when removing host [SCSI] libsas: Remove PCI dependencies [SCSI] simscsi: convert to use the data buffer accessors ...
| * [SCSI] mpt fusion: Changes in mptctl.c for logging supportPrakash, Sathya2007-07-28
| | | | | | | | | | | | | | | | | | | | This patch contains changes in mptctl.c to support logging in MPT fusion drivers The changes are majorly in debug printks, the existing debugprintk are modified accroding to new debug macros defined in the file mptbdebug.h signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mpt fusion: Changes in mptfc.c mptlan.c mptsas.c and mptspi.c for ↵Prakash, Sathya2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | logging support This patch contains changes in mptfc.c, mptlan.c, mptsas.c and mptspi.c to support logging in MPT fusion drivers. The changes are majorly in debug printks, the existing debugprintk are modified accroding to new debug macros defined in the file mptbdebug.h signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mpt fusion: Changes in mptscsih.c for logging supportPrakash, Sathya2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains changes in mptscsih.c to support logging in MPT fusion drivers. The changes are majorly in debug printks, the existing debugprintk are modified accroding to new debug macros defined in the file mptbdebug.h A new sysfs attribute is added to retrieve and modify the debug level. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mpt fusion: Changes in mptbase.c for logging supportPrakash, Sathya2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains changes in mptbase.c to support logging in MPT fusion drivers. The changes are majorly in debug printks, the existing debugprintk are modified accroding to new debug macros defined in the file mptbdebug.h A new module parameter mpt_debug_level is added to pass the debug level as module parameter. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and ↵Prakash, Sathya2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | addition of mptdebug.h This patch adds a new file mptdebug.h in the fusion source directory, which contains different debug macros. The existing debug macros and flags are removed from the mptbase.h and Makefile In Kconfig a new configuration parameter FUSION_LOGGING is added to enable/disable the logging support during compile time. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()Jesper Juhl2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | In sas_smp_get_phy_events() we never test if the call to alloc_smp_req(RPEL_REQ_SIZE) succeeds or fails. That means we run the risk of dereferencing a NULL pointer if it does fail. Far better to test if we got NULL back and in that case return -ENOMEM just as we already do for the other memory allocation in that function. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: fix Sunrise Lake reset handlingSalyzyn, Mark2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch is *much* smaller than the description. I am attempting to answer to those that want to understand an issue that was reported in May this year. If a Sunrise Lake based card that requires an alternate reset mechanism is set up to ignore the commanded IOP_RESET it reports 0x00000010 (IOP_RESET ignored) instead of 0x3803000F (use alternate reset mechanism to reset all cores), and thus the reset platform function decides to switch to IOP_RESET_ALWAYS because the reset platform function parameters indicate that we *need* to reset the card. IOP_RESET_ALWAYS then responds with the 0x3803000F return code, but alas we treat this as an error instead of using the alternate reset mechanism (put a 0x03 into the register offset 0x38). The reset fails, but the fact that the IOP_RESET_ALWAYS command was issued has put the card in a purposeful shutdown state in preparation for the alternate hardware reset to be applied. Yuck. IOP_RESET is ignored in internal production cards, typically to ensure that we catch all adapter lockup issues without the driver progressing further, so this would not appear to be a field issue and thus this patch was destined to be only in the internal Adaptec source tree. IOP_RESET_ALWAYS is reserved for kexec/kdump/FirmwareUpdate/AutomatedTestFrames so we did not function as expected in any case. Also in the past we have had OEMs specifically request that cards not be resetable after a BlinkLED/FirmwareAssert for one reason or another and To head off the possibility that the Sunrise Lake based cards would suffer a similar fate, we propose the enclosed fix. Yinghai Lu of SUN had a pre-production card with IOP_RESET disabled when he reported an issue to the linux kernel list back in May regarding a kexec problem resulting from this reset being ignore. His fix was to update the Firmware to one that did not ignore the IOP_RESET. Previous kernels did not attempt to reset the adapter and that is why it surfaced as a regression in his hands. The current list of aacraid based cards that use Sunrise Lake: 9005:0285:9005:02b5 Adaptec 5445 9005:0285:9005:02b6 Adaptec 5805 9005:0285:9005:02b7 Adaptec 5085 9005:0285:9005:02c3 Adaptec 51205 9005:0285:9005:02c4 Adaptec 51605 9005:0285:9005:02ce Adaptec 51245 9005:0285:9005:02cf Adaptec 51645 9005:0285:9005:02d0 Adaptec 52445 9005:0285:9005:02d1 Adaptec 5405 9005:0285:9005:02b8 ICP ICP5445SL 9005:0285:9005:02b9 ICP ICP5085SL 9005:0285:9005:02ba ICP ICP5805SL 9005:0285:9005:02c5 ICP ICP5125SL 9005:0285:9005:02c6 ICP ICP5165SL 9005:0285:108e:7aac SUN STK RAID REM 9005:0285:108e:0286 SUN STK RAID INT 9005:0285:108e:0287 SUN STK RAID EXT 9005:0285:108e:7aae SUN STK RAID EM All of these are publicly released with IOP_RESET enabled. So there is no immediate need for this patch. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: add SCSI SYNCHONIZE_CACHE range checkingSalyzyn, Mark2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Customer running an application that issues SYNCHRONIZE_CACHE calls directly noticed the broad stroke of the current implementation in the aacraid driver resulting in multiple applications feeding I/O to the storage causing the issuing application to stall for long periods of time. By only waiting for the current WRITE commands, rather than all commands, to complete; and those that are in range of the SYNCHRONIZE_CACHE call that would associate more tightly with the issuing application before telling the Firmware to flush it's dirty cache, we managed to reduce the stalling. The Firmware itself still flushes all the dirty cache associated with the array ignoring the range, it just does so in a more timely manner. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] add easyRAID to the no report luns blacklistakpm@linux-foundation.org2007-07-28
| | | | | | | | | | | | | | | | | | | | According to http://bugzilla.kernel.org/show_bug.cgi?id=5953, the easyRAID returns rubbish to REPORT LUNS. Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Hans-Christian Armingeon <mog.johnny@gmx.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] advansys: lindent and other large, uninteresting changesMatthew Wilcox2007-07-27
| | | | | | | | | | | | | | | | | | | | | | - Run Lindent - Move advansys_detect and advansys_release to the end of the file - Split advansys_board_found out of advansys_detect - Rename a few variables, such as shp to shost and pci_devp to pdev - Turn STATIC into static Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aic79xx, aic7xxx: Fix incorrect width settingJames Bottomley2007-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | Wide transfers are required for every setting of PPR apart from QAS. It seems the DV code starts at the minimum, which turns on DT and Wide regardless of the setting of max_width. Redo the PPR and period setting routines to respect max_width (i.e. start at period = 10 if it is zero). This fixes bugzilla 8366 Acked-by: "Freels, James D." <freelsjd@ornl.gov> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: fix to honor ignored parameters in sysfs attributesSeokmann Ju2007-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch to fix 'segmentation fault' issue which was initiated by Richard Lary <rlary@us.ibm.com>. Thanks again Richard. - on following sysfs attritute function, changes have made so that both count and offset input parameters are honored by the functions. = qla2x00_sysfs_read_nvram() = qla2x00_sysfs_read_vpd() - made changes so that NVRAM data to be cached to minimize H/W accesses during agent querying of the driver's. Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: draw line in sand, sundry cleanup and version updateSalyzyn, Mark2007-07-27
| | | | | | | | | | | | | | | | | | | | Minor unimportant cuttings from the floor bundled in with a version stamp update. Only controversial change is the dropping of Alan Cox copyright on the nark.c module since that file has no code written by him in it. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi_tcp: Turn off bounce buffersMike Christie2007-07-27
| | | | | | | | | | | | | | | | | | | | | | | | | | It was found by LSI that on setups with large amounts of memory we were bouncing buffers when we did not need to. If the iscsi tcp code touches the data buffer (or a helper does), it will kmap the buffer. iscsi_tcp also does not interact with hardware, so it does not have any hw dma restrictions. This patch sets the bounce buffer settings for our device queue so buffers should not be bounced because of a driver limit. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libiscsi: fix cmd seqeunce number checkingMike Christie2007-07-27
| | | | | | | | | | | | | | | | | | We should not be checking the cmd windown for just handling r2t responses. And if the window closes in on us, always have scsi-ml requeue the command from our queuecommand function. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] iscsi_tcp, ib_iser Enable module refcounting for iscsi host templateMike Christie2007-07-27
| | | | | | | | | | | | | | | | | | This prevents the iscsi modules from being unloaded while there are active mounts from an iscsi target. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libiscsi: make sure session is not blocked when removing hostMike Christie2007-07-27
| | | | | | | | | | | | | | | | | | | | When we logout we block the session since we are not taking any more commands, but when we call remove host we want to make sure any IO that got queued up and blocked gets failed upwards quickly, so we unblock the session and fail it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: Remove PCI dependenciesJeff Garzik2007-07-26
| | | | | | | | | | | | | | | | Eliminate unnecessary PCI dependencies in libsas. It should use generic DMA and struct device like other subsystems. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] sym53c8xx: don't claim cpqarray deviceChip Coldwell2007-07-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apropos this thread http://marc.theaimsgroup.com/?l=linux-scsi&m=115591706804045&w=2 which led to this patch http://www.kernel.org/git/?p=linux/kernel/git/jejb/scsi-rc-fixes-2.6.git;a=commit;h=b2b3c121076961333977f485f0d54c22121df920 We also need to fix sym53c8xx only to bind to the PCI ID if it is of device class PCI_CLASS_STORAGE_SCSI (otherwise it will be the cpqarray RAID device). Signed-off-by: Chip Coldwell <coldwell@redhat.com> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] libsas: SMP request handler shouldn't crash when rphy is NULLDarrick J. Wong2007-07-24
| | | | | | | | | | | | | | | | | | | | sas_smp_handler crashes when smp utils are used with an aic94xx host because certain devices (the sas_host itself, specifically) lack rphy structures. No rphy means no SMP target support, but we shouldn't crash here. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: sysfs adapter reset/status format change.Salyzyn, Mark2007-07-23
| | | | | | | | | | | | | | | | We need to newline terminate responses from nodes within the sysfs tree, the Adapter status value reported by the reset adapter node is adjusted. Signed-off-by: Mark Salyzyn <aacraid@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] aacraid: Fix security holeAlan Cox2007-07-23
| | | | | | | | | | | | | | | | | | | | | | On the SCSI layer ioctl path there is no implicit permissions check for ioctls (and indeed other drivers implement unprivileged ioctls). aacraid however allows all sorts of very admin only things to be done so should check. Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] qla2xxx: Data accessors Cleanup of last mergeBoaz Harrosh2007-07-23
| | | | | | | | | | | | | | | | - Left overs from last code merges of qla2xxx Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | Remove fs.h from mm.hAlexey Dobriyan2007-07-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | ACPI: restore CONFIG_ACPI_SLEEPLen Brown2007-07-29
| | | | | | | | | | | | | | | | | | Restore the 2.6.22 CONFIG_ACPI_SLEEP build option, but now shadowing the new CONFIG_PM_SLEEP option. Signed-off-by: Len Brown <len.brown@intel.com> [ Modified to work with the PM config setup changes. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Introduce CONFIG_SUSPEND for suspend-to-Ram and standbyRafael J. Wysocki2007-07-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce CONFIG_SUSPEND representing the ability to enter system sleep states, such as the ACPI S3 state, and allow the user to choose SUSPEND and HIBERNATION independently of each other. Make HOTPLUG_CPU be selected automatically if SUSPEND or HIBERNATION has been chosen and the kernel is intended for SMP systems. Also, introduce CONFIG_PM_SLEEP which is automatically selected if CONFIG_SUSPEND or CONFIG_HIBERNATION is set and use it to select the code needed for both suspend and hibernation. The top-level power management headers and the ACPI code related to suspend and hibernation are modified to use the new definitions (the changes in drivers/acpi/sleep/main.c are, mostly, moving code to reduce the number of ifdefs). There are many other files in which CONFIG_PM can be replaced with CONFIG_PM_SLEEP or even with CONFIG_SUSPEND, but they can be updated in the future. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATIONRafael J. Wysocki2007-07-29
| | | | | | | | | | | | | | | | | | Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Provide timespec to guests rather than jiffies clock.Rusty Russell2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A non-periodic clock_event_device and the "jiffies" clock don't mix well: tick_handle_periodic() can go into an infinite loop. Currently lguest guests use the jiffies clock when the TSC is unusable. Instead, make the Host write the current time into the lguest page on every interrupt. This doesn't cost much but is more precise and at least as accurate as the jiffies clock. It also gets rid of the GET_WALLCLOCK hypercall. Also, delay setting sched_clock until our clock is set up, otherwise the early printk timestamps can go backwards (not harmful, just ugly). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Fix lguest bzImage loading with CONFIG_RELOCATABLE=yRusty Russell2007-07-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jason Yeh sent his crashing .config: bzImages made with CONFIG_RELOCATABLE=y put the relocs where the BSS is expected, and we crash with unusual results such as: lguest: unhandled trap 14 at 0xc0122ae1 (0xa9) Relying on BSS being zero was merely laziness on my part, and unfortunately, lguest doesn't go through the normal startup path (which does this in asm). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds2007-07-28
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] Fix sclp_vt220 error handling. [S390] cio: Reorganize initialization. [S390] cio: Make CIO_* macros safe if dbfs are not available. [S390] cio: Clean up messages. [S390] Fix IRQ tracing. [S390] vmur: fix diag14_read. [S390] Wire up sys_fallocate. [S390] add types.h include to s390_ext.h [S390] cio: Remove deprecated rdc/rcd. [S390] Get rid of new section mismatch warnings. [S390] sclp: kill unused SCLP config option. [S390] cio: Remove remains of _ccw_device_get_device_number(). [S390] cio: css_sch_device_register() can be made static. [S390] Improve __smp_call_function_map. [S390] Convert to smp_call_function_single.
| * | [S390] Fix sclp_vt220 error handling.Heiko Carstens2007-07-27
| | | | | | | | | | | | | | | | | | | | | | | | Also convert to slab_is_available() as an indicator if get_zeroed_page() will work or not. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] cio: Reorganize initialization.Cornelia Huck2007-07-27
| | | | | | | | | | | | | | | | | | | | | | | | - Localize more of the init calls in init_channel_subsystem(). - Print a warning if init_channel_subsystem() failed. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] cio: Make CIO_* macros safe if dbfs are not available.Cornelia Huck2007-07-27
| | | | | | | | | | | | | | | Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-27 11:13:41 -0500