aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* ide: add ide_tf_read() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | * Factor out code reading taskfile registers from ide_end_drive_cmd() to the new ide_tf_read() helper. * Add IDE_TFLAG_IN_* taskfile flags to indicate the need to load particular IDE taskfile register in ide_tf_read(). * Update ide_end_drive_cmd() to set respective IDE_TFLAG_IN_* taksfile flags. * Add ide_get_lba_addr() for getting LBA sector address from taskfile struct. * Factor out code getting sector address from ide_dump_ata_status() to the new ide_dump_sector() function. * Convert ide_dump_sector() to use ide_tf_read() and ide_get_lba_addr(). * Remove no longer needed ide_read_24(). The only change in functionality caused by this patch is that ide_dump_ata_status() no longer prints "high"/"low" parts of LBA48 sector address (of course LBA48 sector address is still printed). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix registers loading order in ide_dump_ata_status()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | Fix registers loading order in ide_dump_ata_status()/ide_read_24(). Load registers in this order: * IDE_SECTOR_REG * IDE_LCYL_REG * IDE_HCYL_REG * IDE_SELECT_REG It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: use do_rw_taskfile() (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | * Add IDE_TFLAG_DMA_PIO_FALLBACK taskfile flag to indicate the need to skip loading taskfile registers in do_rw_taskfile(). * Export do_rw_taskfile(). * Convert __ide_do_rw_disk() to use do_rw_taskfile(). * Unexport ide_tf_load(). * Unexport {pre_task_out,task_in}_intr() and make it static. * Remove incorrect comment about do_rw_taskfile() from <linux/ide.h>. There should be no functionality changes caused by this patch. v2: * Add missing blk_fs_request() check to task_dma_ok() (for VDMA). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: add ide_tf_set_cmd() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | * Add ide_tf_set_cmd() helper for selecting/setting command and data phase (note: DMA data phases are there for completness, they are not required ATM). * Set IDE_TFLAG_WRITE taskfile flag for write requests in __ide_do_rw_disk(). * Convert __ide_do_rw_disk() to use the new ide_tf_set_cmd() helper. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: extend timeout for PIO-in commandsBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | s/WAIT_CMD/WAIT_WORSTCASE/ to make the timeout the same as in do_rw_taskfile() Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove 'handler' field from ide_task_t (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | * Add IDE_TFLAG_CUSTOM_HANDLER taskfile flag and use it for internal requests which require custom handlers. Check the flag in do_rw_taskfile() and set handler accordingly. * Cleanup ide_init_{specify,restore,setmult}_cmd() and rename it to ide_tf_set_{specify,restore,setmult}_cmd(). * Make {set_geometry,recal,set_multmode}_intr() static. * Remove no longer needed 'handler' field from ide_task_t. v2: * 'handler' in do_rw_taskfile() must be set to NULL initially. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use ->data_phase to set ->handler in do_rw_taskfile()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | * Use ->data_phase to set ->handler in do_rw_taskfile() instead of setting ->handler in callers of ide_raw_taskfile()/do_rw_taskfile(). * Unexport task_no_data_intr() and make it static. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: convert do_rw_taskfile() to use ->data_phaseBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | * Use task->data_phase in do_rw_taskfile() to decide what to do. * task->prehandler is only used by TASKFILE[_MULTI]_OUT so just use pre_task_out_intr() directly and remove no longer needed 'prehandler' field from ide_task_t. * Remove no longer needed ide_pre_handler_t type. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: merge flagged_taskfile() into do_rw_taskfile()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | Based on the earlier work by Tejun Heo. task->data_phase == TASKFILE_MULTI_{IN,OUT} vs drive->mult_count == 0 check is needed also for ide_taskfile_ioctl() requests that don't have IDE_TFLAG_FLAGGED taskfile flag set. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: guarantee 400ns delay after writing command registerBartlomiej Zolnierkiewicz2008-01-25
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: fix __ide_do_rw_disk() to use ->OUTBSYNCBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | Fix __ide_do_rw_disk() to use ->OUTBSYNC instead of ->OUTB (needed for pmac and scc_pata host drivers). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* sc1200: remove pointless hwif lookup loopBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | Save PCI regs values for both IDE ports in one buffer, in order to eliminate a needless and ugly loop across all hwifs, searching for our PCI device. Partially based on the previous patch by Jeff Garzik. Cc: Jeff Garzik <jeff@garzik.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove 'tf_in_flags' field from ide_task_tBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_TFLAG_IN_DATA taskfile flag to indicate the need of reading IDE_DATA_REG in ide_end_drive_cmd(). Set the new flag in ide_taskfile_ioctl() if ->in_flags.b.data is set. * Add IDE_TFLAG_FLAGGED_SET_IN_FLAGS taskfile flag to indicate the need of modifying ->in_flags in ide_taskfile_ioctl(). Set the new flag in flagged_taskfile() and move the code modifying ->tf_in_flags to ide_taskfile_ioctl(). While at it remove the bogus comment: ->tf_in_flags (except .b.data) have no effect on selection of registers to read. * Remove no longer needed 'tf_in_flags' field from ide_task_t. As the result we finally have the internals of HDIO_DRIVE_TASKFILE ioctl separated from the core IDE code. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove 'command_type' field from ide_task_tBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add 'data_buf' and 'nsect' variables in ide_taskfile_ioctl() to cache data buffer pointer and number of sectors to transfer (this allows us to have only one ide_diag_taskfile() call). * Add IDE_TFLAG_WRITE taskfile flag and use it to check whether the REQ_RW request flag should be set. * Move ->command_type handling from ide_diag_taskfile() to ide_taskfile_ioctl() and use ->req_cmd instead of ->command_type. * Add 'nsect' parameter to ide_raw_taskfile(). * Merge ide_diag_taskfile() into ide_raw_taskfile(). * Initialize ->data_phase explicitly in idedisk_prepare_flush(), ide_start_power_step() and ide_disk_special(). * Remove no longer needed 'command_type' field from ide_task_t. * Add #ifndef/#endif __KERNEL__ to <linux/hdreg.h> around no longer used by kernel IDE_DRIVE_TASK_* and TASKFILE_* defines. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove hwif->intrprocBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | Given that: * hpt366.c::hpt3xx_intrproc() is the only user of hwif->intrproc * hpt366.c::hpt3xx_quirkproc() sets drive->quirk_list to 1 for quirky drives which is a value unique to hpt366 host driver we can remove hwif->intproc and just check for drive->quirk_list == 1 in ide_do_request(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove SELECT_INTERRUPT()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove QUIRK_LIST()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_pktcmd_tf_load() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | Add ide_pktcmd_tf_load() helper and convert ATAPI device drivers to use it. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-{floppy,tape,scsi}: fix register loading order when issuing packet commandBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | Load IDE_BCOUNTL_REG before IDE_BCOUNTH_REG when issuing packet command. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-cd: fix register loading order in cdrom_start_packet_command()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | Load IDE_CONTROL_REG before other registers in cdrom_start_packet_command(). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). While at it move misplaced FIXME comment in the right place. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove atapi_ireason_t (take 3)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | Remove atapi_ireason_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) v2: * v1 had CD and IO bits reversed in many places. * Use CD and IO defines from <linux/hdreg.h>. v3: * Fix incorrect "(ireason & IO) == test_bit()". (Noticed by Sergei) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ata_nsector_t, ata_data_t and atapi_bcount_tBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | Remove ata_nsector_t, ata_data_t (unused) and atapi_bcount_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove atapi_feature_tBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | Remove atapi_feature_t. While at it: * replace 'HWIF(drive)' by 'hwif' Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove atapi_error_t (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | Remove atapi_error_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' v2: * Add {ILI,EOM,LFS}_ERR defines to <linux/hdreg.h>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ata_status_t and atapi_status_tBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | Remove ata_status_t (unused) and atapi_status_t. While at it: * replace 'HWIF(drive)' by 'drive->hwif' (or just 'hwif' where possible) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-floppy: remove dead codeBartlomiej Zolnierkiewicz2008-01-25
| | | | | Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove REQ_TYPE_ATA_TASKBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | Based on the earlier work by Tejun Heo. All users are gone so we can finally remove it. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: switch ide_task_ioctl() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: switch idedisk_prepare_flush() to use REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: extend timeout for REQ_TYPE_ATA_{CMD,TASK} requestsBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | Extend timeout for REQ_TYPE_ATA_{CMD,TASK} requests from WAIT_CMD (10sec) to WAIT_WORSTCASE (30sec, already used for REQ_TYPE_ATA_TASKFILE). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove unnecessary writes to HOB taskfile registersBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Set taskfile flags for REQ_TYPE_ATA_TASKFILE requests before adding the request to the queue. * Cleanup execute_drive_cmd(). * Remove unnecessary writes to HOB taskfile registers when using LBA48 disk for the following cases: - Power Management requests (WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands) - special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT) - Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX) - /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE, SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands) - write cache enabling/disabling in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE) - write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT]) - acoustic management in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM) - door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK) - /proc/ide/hd?/identify support (WIN_IDENTIFY) - ACPI _GTF taskfiles Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use IDE_TFLAG_LBA48 for REQ_TYPE_ATA_TASKFILE requestsBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | * Use IDE_TFLAG_LBA48 for REQ_TYPE_ATA_TASKFILE requests in ide_end_drive_cmd() to decide whether we need to read HOB taskfile registers. * Update execute_drive_cmd() accordingly. This is a preparation for the next patch which removes unnecessary writes to HOB taskfile registers for some ATA commands. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use ide_tf_load() in execute_drive_cmd()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | * Add IDE_TFLAG_OUT_DEVICE taskfile flag to indicate the need of writing the Device register and handle it in ide_tf_load(). Update ide_tf_load() and {do_rw,flagged}_taskfile() users accordingly. * Use struct ide_taskfile and ide_tf_load() in execute_drive_cmd(). * Make the debugging code dump all taskfile registers for both REQ_ATA_TYPE_{CMD,TASK} requests and move it to ide_tf_load() so it also covers REQ_ATA_TYPE_TASKFILE requests. There should be no functionality changes caused by this patch (unless DEBUG is defined). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ide_cmd() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | * Remove ide_cmd() helper. * Clear nIEN and call SELECT_MASK() before writing taskfile registers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: execute_drive_cmd() cleanupBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | * Rename 'args' variable in 'if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)' block to 'task'. * execute_drive_cmd() is used only for REQ_TYPE_ATA_{CMD,TASK,TASKFILE} so we can move the common code out from 'if (rq->cmd_type == REQ_TYPE_ATA_CMD)' and 'if (rq->cmd_type == REQ_TYPE_ATA_TASK)' blocks. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix registers loading order for IDE_NSECTOR_REG in execute_drive_cmd()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | Move loading of IDE_NSECTOR_REG from ide_cmd() to execute_drive_cmd() (load the IDE_NSECTOR_REG just after IDE_FEATURE_REG). This also allows us to drop 'nsect' argument from ide_cmd() and simplify execute_drive_cmd() code for REQ_TYPE_ATA_CMD case a bit. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix registers loading order for WIN_SMART in execute_drive_cmd()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | Fix registers loading order for REQ_TYPE_ATA_CMD request with WIN_SMART command in execute_drive_cmd() (load IDE_FEATURE_REG and IDE_SECTOR_REG before loading IDE_LCYL_REG and IDE_HCYL_REG). It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-tape: remove dead USE_IOTRACE codeBartlomiej Zolnierkiewicz2008-01-25
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove stale ide.h "configuration options"Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | Remove stale ide.h "configuration options": * INITIAL_MULT_COUNT - always defined to 0 * SUPPORT_SLOW_DATA_PORTS - unused * OK_TO_RESET_CONTROLLER - always defined to 1 * DISABLE_IRQ_NOSYNC - always defined to 0 Leave SUPPORT_VLB_SYNC (defined to 0 for CRIS and FRV, otherwise to 1) for now but disallow overriding it by <asm/ide.h>. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove CONFIG_IDEPCI_SHARE_IRQ config optionBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | We can safely remove CONFIG_IDEPCI_SHARE_IRQ and always support PCI IRQ sharing. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove IRQF_DISABLED from IRQ flags for IDE IRQ handlerBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IRQF_DISABLED is not needed because the first thing that ide_intr() (IDE IRQ handler) does is calling spin_lock_irqsave() which disables local IRQs (IRQ unmasking is later handled by drive->unmask). kernel/irq/handle.c: irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) ... if (!(action->flags & IRQF_DISABLED)) local_irq_enable_in_hardirq(); do { ret = action->handler(irq, action->dev_id); if (ret == IRQ_HANDLED) status |= action->flags; retval |= ret; action = action->next; } while (action); ... drivers/ide/ide-io.c: irqreturn_t ide_intr (int irq, void *dev_id) ... spin_lock_irqsave(&ide_lock, flags); ... spin_unlock(&ide_lock); ... if (drive->unmask) local_irq_enable_in_hardirq(); ... Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-pmac: fix pmac_ide_init_hwif_ports()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | * pmac_ide_init_hwif_ports() can be called by ide_init_hwif_ports() (through ppc_ide_md.ide_init_hwif hook) for non IDE PMAC interfaces. If this is the case the hw->io_ports[] should be already setup by ide_init_hwif_ports()->ide_std_init_ports() so remove redundant code from pmac_ide_init_hwif_ports(). As side-effect this change fixes ctl_addr == 0 special handling in ide_init_hwif_ports(). * Fix misleading comment while at it. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use do_rw_taskfile() in flagged_taskfile()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the earlier work by Tejun Heo. * Move setting IDE_TFLAG_LBA48 taskfile flag from do_rw_taskfile() function to the callers. * Add IDE_TFLAG_FLAGGED taskfile flag for flagged taskfiles coming from ide_taskfile_ioctl(). Check it instead of ->tf_out_flags.all. * Add IDE_TFLAG_OUT_DATA taskfile flag to indicate the need to load IDE data register in ide_tf_load(). * Add IDE_TFLAG_OUT_* taskfile flags to indicate the need to load particular IDE taskfile registers in ide_tf_load(). * Update do_rw_taskfile() and ide_tf_load() users to set respective IDE_TFLAG_OUT_* taksfile flags. * Add task_dma_ok() helper. * Use IDE_TFLAG_FLAGGED taskfile flag to select HIHI mask in ide_tf_load(). * Use do_rw_taskfile() in flagged_taskfile(). * Remove no longer needed 'tf_out_flags' field from ide_task_t. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_no_data_taskfile() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | * Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA protocol users to use it instead. * Set ->data_phase explicitly in ide_no_data_taskfile() (TASKFILE_NO_DATA is defined as 0x0000). * Unexport task_no_data_intr(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_tf_load() helperBartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | Based on the earlier work by Tejun Heo. * Add 'tf_flags' field (for taskfile flags) to ide_task_t. * Add IDE_TFLAG_LBA48 taskfile flag for LBA48 taskfiles. * Add IDE_TFLAG_NO_SELECT_MASK taskfile flag for __ide_do_rw_disk() which doesn't use SELECT_MASK() (looks like a bug but it requires some more investigation). * Split off ide_tf_load() helper from do_rw_taskfile(). * Convert __ide_do_rw_disk() to use ide_tf_load(). There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: use struct ide_taskfile in __ide_do_rw_disk()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | Based on the earlier work by Tejun Heo. There should be no functionality changes caused by this patch. Cc: Tejun Heo <htejun@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: fix taskfile registers loading order in __ide_do_rw_disk()Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | Load IDE_SECTOR_REG after IDE_FEATURE_REG and IDE_NSECTOR_REG when using CHS. This patch is basically a preparation for the next one which converts __ide_do_rw_disk() to use struct ide_taskfile. It shouldn't affect anything (just a usual paranoia to separate changes which change the way in which hardware is accessed from code cleanups). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-disk: merge LBA28 and LBA48 Host Protected Area support code (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | * Merge idedisk_{read_native,set}_max_address_ext() into idedisk_{read_native,set}_max_address(). v2: * Remove LBA48 code leftover from idedisk_read_native_max_address() ('high' variable initialization). (Noticed by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_taskfile (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove task_ioreg_t typedef (take 2)Bartlomiej Zolnierkiewicz2008-01-25
| | | | | | | | | | | | | | Remove task_ioreg_t typedef from the kernel code (but leave it in <linux/hdreg.h> for #ifndef/#endif __KERNEL__ case). While at it also move sata_ioreg_t typedef under #ifndef/#endif __KERNEL__. v2: Remove name of the second parameter from ide_execute_command() declaration. (Noticed by Sergei). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-02 22:28:06 -0500